I wanted a Jimny, but they're stupid prices, what you've got is so much better and magnitudes cheaper it's not funny. Well done for choosing this, you're so ahead of the ball right from the get go. I'm digging the vehicle. Wish I had one.
I saw a 90's Suzuki Vitara driving around Bedfordshire U.K yesterday, was multiple vibrant colours, with the JLX three spoke wide alloys and arches, not seen one of those for a few decades.
Whoever is doing the music for these eps is coming up with some absolute bangers! Honestly, I think the Pajero Mini is sitting at the right height now; it certainly looks good. I wonder of LED replacement front lights are available for those little beasts?
I took struts to a shop to be fitted with new springs and even they were hesitant about the job - and they had a very large bench system! Apparently its BA falcon series one springs that scare everyone!
Working on my BMW E39 w/ Elliptical springs taught me those spring compressors are dangerous. Compressor slid around the spring and pinched my finger. I got it out and kept my finger. After that I bought a Schwaben Spring compressor w/ a single spindle and C shaped spring cups w/ lips to retain the spring. Way safer , more expensive but not as much as going to the emergency room. Benny, Tool Pro should have a safer compressor.
It's hard to know between MCM and BCW which one is the best 4x4 channel on the internet, bloody brilliant episode Benny, short and sweet, loving the content
Anything over 2.5 inches will bind the front cv badly on full droop. I’d recommend 2 inches max. Shock spacers will also add positive camber too so keep that in mind
We just bought a Pajero Mini. Your content has been super helpful!
Thanks, I love mine.
I wanted a Jimny, but they're stupid prices, what you've got is so much better and magnitudes cheaper it's not funny. Well done for choosing this, you're so ahead of the ball right from the get go. I'm digging the vehicle. Wish I had one.
Why is it so much better than a jimny?
@@mj_aussie_coaster_travels8310 better value. The Jimny is over priced and that's keeping it back.
Bennys pajero mini vs the mcm kei truck the ultimate kei 4wd battle
The pajero would absolutely smoke it the kei trucks have shit ground clearance
Those two vehicles, us Moog's Suzuki, would be an awesome video
I saw a 90's Suzuki Vitara driving around Bedfordshire U.K yesterday, was multiple vibrant colours, with the JLX three spoke wide alloys and arches, not seen one of those for a few decades.
Whoever is doing the music for these eps is coming up with some absolute bangers!
Honestly, I think the Pajero Mini is sitting at the right height now; it certainly looks good. I wonder of LED replacement front lights are available for those little beasts?
They are standard 7" round. So miata/jeep headlights work a treat.
Nice !!!!! Is now dropped stock make it a keeper top work Benny 🍻👍
I took struts to a shop to be fitted with new springs and even they were hesitant about the job - and they had a very large bench system! Apparently its BA falcon series one springs that scare everyone!
Yeah those are nasty.
@@BennysCustomWorks what kind of tire are these and what size
can't wait for more videos of pajero mini! i owned one and i love seeing the transformation
Hope see some 4WD action, 24-7 with the Best 4WD channel in the world.😂
Working on my BMW E39 w/ Elliptical springs taught me those spring compressors are dangerous. Compressor slid around the spring and pinched my finger. I got it out and kept my finger. After that I bought a Schwaben Spring compressor w/ a single spindle and C shaped spring cups w/ lips to retain the spring. Way safer , more expensive but not as much as going to the emergency room.
Benny, Tool Pro should have a safer compressor.
Ever used a Branick wall mounted spring compressor? Pricey but they are a game changer if you do a lot of struts
I haven’t :(
It's hard to know between MCM and BCW which one is the best 4x4 channel on the internet, bloody brilliant episode Benny, short and sweet, loving the content
Hoping the MCM and BCW Kei 4x4s end up together on a trail
BCW is the best 4x4 channel on the interballs due to not having a cooking segment 😂
I’m in the US and would love to buy these springs. Anyway you guys can assist?
Love the videos! It’s obvious you’re professionals
Had one years ago and it was so good in off road/snow conditions..... Could honestly cry now thinking how little I sold it for 😢
Just needs a rear LSD
Are there any cars ie Jimny etc, that have like for like parts to suit a 96 xr II?
How do you find the ride with the stock shocks? Ive heard that the kyb shocks have more range of motion and better suit taller springs 😊
It’s ok but I would love to put new shocks in all round.
Where can one get a set of these springs?
Where did you order new springs?
Where did you get the springs need some for my 01 mini
Yahoo Japan. I can supply them if needed
I need them in the caribbean, can that work?
@@BennysCustomWorks
@@BennysCustomWorks is there a way I can contact you email or another ?
@@minipeople4x4 yeah mate.
Ben@bennyscustomworks.com
Sir i have questions and needs badly answer of this question,sir how many inches can be mini pajero lifted using shock spacer ?1 inch 2inch 3 inch ,
Anything over 2.5 inches will bind the front cv badly on full droop. I’d recommend 2 inches max. Shock spacers will also add positive camber too so keep that in mind
Where do I get a lift kit for my pajero mini
We can supply these springs
Where are you getting your parts?
Japan. If you need anything I can help out
Thanks! Now that theses are legal for import in the States I hope part availability will increase.
Can you please provide specs for the wheel and tire setup
Yeah, nah, yeah, not bad. 🤓
Dry
benny takes wheel off car without bouncing it challenge - (impossible)
😂
Moist
Indeed
Proudly sponsored by sparesbox yeah nah that company sucks, they sell you items they dont have and then ghost you. Love your work benny but im out