Thank You for your time !!! I’ve swapped engines before but this with all the electronics and smog and everything may be a bit much ,,, ide do the work, I’m retired so I got time but layin all that Jack out for the motor and extra stuff is ok until you realize that you just threw all that Jack out and it doesn’t fit up !!! But thanks man for the time and effort, really appreciated the video
Thanks Carlos: . I see this is a 3 yr old vid. that somehow I've missed. Thanks for ALL your hands-on intel.!!! Great ideas. . So ok, I'll 'share' my next year's project with ya'll, as if one cares. 04 4.7 extended cab 2WD lumber rack work truck w/ ~160,000miles. Has held together like a dream, except when the lft ft ball joint fell off. Yea, it was close as mph was under 10. Personally hands-on converting into a strong & head-turning road truck w/ the lumber rack (light work & hang gliding). Conversion to: 5.7 w/ supercharger, manual trany, beefy rear end & driveshaft, wider rims (Center Lines?), flared rear fender, dually exhaust w/ side pipes (Cali legal is target -yea yea) & thrush muffs, disc brakes @ all corners (drums in back @ present), modified hood, strip-down new paint, suspension system stiff & all modified & new, etc. Perhaps after I resurrect my channel here, I'll post some vids of the process & results. Some trucks just have the look & my 04 has that look. It's a keeper.
Ehh yo lmk on the progress with this build please sir. I bought a truck from my friends family after he passed, its exactly like the one you want to build. Right down to the manual swap
Currently doing this in a WK Jeep 06 Hemi into a 05. By firewall harness you do mean the same one that the headlights and all plug into? And instead of a vacuum canister like on the 4.7 for the cruise I have 2 small sensors down behind the wheels on the firewall. Are these for the cruise somehow?
I don't know if you'll get this hopefully you do my question is I have a friend that has a 2006 Dodge ram 1500 quad cab gasoline motor 4.7 automatic rear-wheel drive. Having a problem locating both motor mounts can I use motor mounts from a 2006 Dodge ram 1500 quad cab 5.7 once again 5.7 rear wheel drive. Are the motor mounts compatible between 4.7and 5.7 same year same rear wheel drive?
Ok i know this is a bit late but im kinda lost now. I decided to swap my 4.7 to a 5.7. Here is the problem. The donar truck that had the 5.7 in it was a 2005. My truck the that had the 4.7 in it is a 2007. I know they changed the system in 2006. Here is what i need to ask. Will the harness from a 2005 that had a 4.7 in it work from the fuse block back? I know we need to change the harness due to the change that dodge did, just needing to know what i asked. Thanks for any info you can give.
Hey bro, I need some advice and game on this. I’m helping a client and they did the swap to 5.7 magnum, however the engine harness looks spliced @ the firewall next to booster. I’m getting cranking but no start. I have fuel and the ecu gave fuel relay module and automatic shutoff circuit. I moved fuses and relays and I don’t get those codes. Still no start, only cranks. Thanks brothas
Hey i did the swap with the whole doner truck so i got evwrything from the 5.7 . But the problem is is the vinmatch on the ecm . Starts for 2 seconds then shuts off
Howzit bro i did the swap but doesnt crank with the key but it will turn by jumping the starter relay. The dash comes on the radio and lights to but no spark when jumpin relay. Any thoughts?
Awesome video. I just swapped an 05 hemi into an 06 ram and one of the small connectors under the dash has a wire pinned different and the radio and heat and AC controls do not work did u have any problem with that. Also the truck I swapped it into has the security key and the owner had lost the key. Can that be bypassed. I used the complete engine harness and computer from the 05. Any help would be greatly appreciated
Thinking about 5.7 swapping into 1981 Oldsmobile delta 88 have running and driving charger charger my question is what all does the computer need to start and drive besides ignition and engine etc and what about fuel my car has a carburetor
I have a few questions. I'm doing the same thing. What did it take to do the motor mounts?? I have a 02 4.7 ram 1500 doing a hemi swap harness an block. Also want know what year your truck is an what year is the doner truck. An did u have a key security problem??
Have you ever done a swap on a Charger or Magnum with the 3.5 or 2.7 to a 5.7? Yo quiero hacer un swap a un 05 Magnum que tengo with the 3.5 y le quiero poner un 5.7 hemi but I cant find reliable info and I like how you explain stuff thats why I ask. I already have the engine, PCM, & harness from a 07 jeep commander but i just don't know if that harness is going to work for me for this swap a lil info could help. Thanks
Hey what's up sorry just seen your message but I have not done a charger swap but I'm pretty sure it will fit but maybe the motor mounts will be different for sure but that should not stop your from doing your engine swap if you have the time and a lil extra money buy your self a small welder and make them your self like I did and you will be all good
I have a 2002 Dodge Ram 1500 $X$ full four-door with a 4.7 my husband Jeff bought a whole 2004 Dodge Ram 1500 2-wheel drive minus the cab with a 5.7 HEMI in it. I notice this video talks about the motor mounts won't work but you are talking about the 5.7 being a 4X4 going into a 2X4 4.7.
Currently trying to put a 4th gen hemi in my 2007 3rd gen i have the 4.7 im asking you think i may need to replace the tranny or would i still be able to run this tranny its automatic and everything just wasnt sure i couldnt see why not its a newer motor yea figured maybe they didnt change much not sure
I'm currently swapping a 2007 4.7 4wd with a 2004 5.7 2wd. The connections on the transmission/transfer case are not the same. Is there any fix for this?
Did u find a fix for this? Because I'm afraid I'm going to run into this problem ... I have a 2007 engine that I'm putting in a 2004 Dakota.. both 4.7 but I believe one is 2wd and the other is 4wd..
I’m doing a 4.7 5.7 swap my truck is a 2 wheel drive 05 the donor truck is a 5.7 4 wheel drive 03 will The harnesses and control modules transfer over?
I have a 2002 4.7 dodge ram , my last engine was blown and then I got a new engine they told me it was 2002 engine but once it was inside the truck they told me it was a 2005 engine but still a 4.7 . Everything pretty much fit good except they told me I have to change the reluctor ring or the computer . I was wondering if you can help me out with this problem because due to this I’m not able to start the truck at all it cranks and everything but won’t start
The crank tone ring and timing wheel most likely, if the 8th vin digit is an N it's a 4 plug (NgK engine) so if your computer has 3 plugs but you got a 4 plug engine you've a lot of work to do, most likely pull it back out to change crank tone ring and timing sensor wheel. Better off trading the engine
Question: I have a 2006 Dodge Ram 1500 4.7L, wanting to change to 5.7L hemi. Do have I have to stick to the same year truck or do I have maybe 2 or 3 years to choose from? Thx.
@@rileycarpenter8312 In my search for a donor truck, I actually ended up buying an excellent condition 2011 5.7L Hemi for a great price. So I'm going to sell my 2006 4.7L.
Question I swapped my engine from my 03 ram 1500 4.7 to my 08 ram 1500 4.7 as well also swapped harness and computer but I get no power to my instrument panel or cluster. Doesn’t crank or nothing
Did you use your same transmission. The 47re. I did the 5.7 swap my truck is an 02 and the motor is out of an 04. My transmission was working fine b4 I did the swap and now my transmission is stuck in 3rd gear. Limp mode.. it’s drivable but it’s stuck in 3rd. I was just wondering if anyone had the same problem. I also changed the tcm as well.
@@carloszng5 I got a99 Dodge needs tranny I found a Dodge data go the pump in the front of tranny's smaller so the tork converters smaller can I'll get tork converters that will work for 4'2
I Have A 2003 5.7 and it spawn A baring so I brought A 2007 Jeep compass with 5.7 Hemi I got all the wiring but still kinda lost what All u think I need to chang I already have the Jeep motor n Trans in my truck n Computer hooked up
Tengo 2003 Dodge Ram 1500 cabina regular con motor 3.7L y quiero cambiar por 5.7L quiero que me sugieras que si le queda o cuales son los cambios que se tiene que hacer
Hola Carlos tengo una Dodge Ram 2003 1500 se me fregó el motor de 3.7l y le quiero una 5.7l quiero saber saber cuales son los cambios y que necesito hacer por favor si puedes sugerirme.
I'm having this done right now. My mechanic is stuck with the throttle. Coming from the 4.7 it was a cable and the 5.7 is electronic. How did you bypass this?
@@carloszng5 Ended up selling the 4.7 and getting another c/k series truck. Much much more engine bay space to work, I like my wrenching shade tree style. lol
Eso es lo que esta esplicando en el video, Que vas a necitar un chingo de cosas del 5.7 para que tu troka jale.. Que sale mas bara tener una troka 5.7 para sacarle partes porque no son iguales los motores
Hi my 4.7 was a 03 and my 5.7 a 04 and on the wire harness the 4.7 one will not work with the 5.7 basically you need all the wires that are in the engine cab for the 5.7 and computer
@@carloszng5 I got a 99 Dodge ram 4by4 4'2 motor 318 found a 4 by 4 from darango pump in front small ier so converter don't fit can I get converter with ringgear to match
Thank You for your time !!! I’ve swapped engines before but this with all the electronics and smog and everything may be a bit much ,,, ide do the work, I’m retired so I got time but layin all that Jack out for the motor and extra stuff is ok until you realize that you just threw all that Jack out and it doesn’t fit up !!! But thanks man for the time and effort, really appreciated the video
Thanks Carlos:
.
I see this is a 3 yr old vid. that somehow I've missed.
Thanks for ALL your hands-on intel.!!! Great ideas.
.
So ok, I'll 'share' my next year's project with ya'll, as if one cares.
04 4.7 extended cab 2WD lumber rack work truck w/ ~160,000miles. Has held together like a dream, except when the lft ft ball joint fell off. Yea, it was close as mph was under 10.
Personally hands-on converting into a strong & head-turning road truck w/ the lumber rack (light work & hang gliding).
Conversion to: 5.7 w/ supercharger, manual trany, beefy rear end & driveshaft, wider rims (Center Lines?), flared rear fender, dually exhaust w/ side pipes (Cali legal is target -yea yea) & thrush muffs, disc brakes @ all corners (drums in back @ present), modified hood, strip-down new paint, suspension system stiff & all modified & new, etc.
Perhaps after I resurrect my channel here, I'll post some vids of the process & results.
Some trucks just have the look & my 04 has that look. It's a keeper.
Ehh yo lmk on the progress with this build please sir. I bought a truck from my friends family after he passed, its exactly like the one you want to build. Right down to the manual swap
But i am having issues and having a hard time figuring it all out. I feel everyone knows what its like to figure out someone else work
im switching from 4.7 to 5.9 2wheel drive what to do with flywheel the bolt patterns are different
Currently doing this in a WK Jeep 06 Hemi into a 05. By firewall harness you do mean the same one that the headlights and all plug into? And instead of a vacuum canister like on the 4.7 for the cruise I have 2 small sensors down behind the wheels on the firewall. Are these for the cruise somehow?
Very informative thanks good to know
Will the motor harness plug into the 4.7 dash harness?
Did u have to do a vin lock for yours? Mine is not turning over or the fuel pump is not engaging. The lights work an windows
I don't know if you'll get this hopefully you do my question is I have a friend that has a 2006 Dodge ram 1500 quad cab gasoline motor 4.7 automatic rear-wheel drive. Having a problem locating both motor mounts can I use motor mounts from a 2006 Dodge ram 1500 quad cab 5.7 once again 5.7 rear wheel drive. Are the motor mounts compatible between 4.7and 5.7 same year same rear wheel drive?
Ok i know this is a bit late but im kinda lost now. I decided to swap my 4.7 to a 5.7. Here is the problem. The donar truck that had the 5.7 in it was a 2005. My truck the that had the 4.7 in it is a 2007. I know they changed the system in 2006. Here is what i need to ask. Will the harness from a 2005 that had a 4.7 in it work from the fuse block back? I know we need to change the harness due to the change that dodge did, just needing to know what i asked. Thanks for any info you can give.
Hey bro, I need some advice and game on this. I’m helping a client and they did the swap to 5.7 magnum, however the engine harness looks spliced @ the firewall next to booster. I’m getting cranking but no start. I have fuel and the ecu gave fuel relay module and automatic shutoff circuit. I moved fuses and relays and I don’t get those codes. Still no start, only cranks. Thanks brothas
Super helpful bro! Might just buy a donor truck now!
Sounds good have fun
Wngine harness and the harness that goes inside the firewall to inside the cab, connect straight into the dashboard connector?
Yes you would need the one that goes to the fire wall to the dash to make it work
Hey i did the swap with the whole doner truck so i got evwrything from the 5.7 . But the problem is is the vinmatch on the ecm . Starts for 2 seconds then shuts off
Howzit bro i did the swap but doesnt crank with the key but it will turn by jumping the starter relay. The dash comes on the radio and lights to but no spark when jumpin relay. Any thoughts?
transmission tambien y diferencial ??? gracias
Thanks for the info
Awesome video. I just swapped an 05 hemi into an 06 ram and one of the small connectors under the dash has a wire pinned different and the radio and heat and AC controls do not work did u have any problem with that. Also the truck I swapped it into has the security key and the owner had lost the key. Can that be bypassed. I used the complete engine harness and computer from the 05. Any help would be greatly appreciated
Get with me on anything you find out
Hey does the 5.7 bolt up to the auto box,any mods.cheers
Thinking about 5.7 swapping into 1981 Oldsmobile delta 88 have running and driving charger charger my question is what all does the computer need to start and drive besides ignition and engine etc and what about fuel my car has a carburetor
You’d need quite a few things that adds up cost very fast
I have a few questions. I'm doing the same thing. What did it take to do the motor mounts?? I have a 02 4.7 ram 1500 doing a hemi swap harness an block. Also want know what year your truck is an what year is the doner truck. An did u have a key security problem??
To do the motor mounts I use 2 Flat plates the year of my truck is a 03 and the donor was a 04 and no on the key I use the same key
Have you ever done a swap on a Charger or Magnum with the 3.5 or 2.7 to a 5.7?
Yo quiero hacer un swap a un 05 Magnum que tengo with the 3.5 y le quiero poner un 5.7 hemi but I cant find reliable info and I like how you explain stuff thats why I ask.
I already have the engine, PCM, & harness from a 07 jeep commander but i just don't know if that harness is going to work for me for this swap a lil info could help. Thanks
Hey what's up sorry just seen your message but I have not done a charger swap but I'm pretty sure it will fit but maybe the motor mounts will be different for sure but that should not stop your from doing your engine swap if you have the time and a lil extra money buy your self a small welder and make them your self like I did and you will be all good
all this spanglish gave me a headache lol!
did you get to do the swap?
This dude kinda sounds like the professor from money heist
What's the engine bolt size that you have on top that you have it hooked in order to pull the 4.7l motor out? Thanks in advance
It's 5/16-18 threads. Make sure you use grade 8 bolts.
I have a 2002 Dodge Ram 1500 $X$ full four-door with a 4.7 my husband Jeff bought a whole 2004 Dodge Ram 1500 2-wheel drive minus the cab with a 5.7 HEMI in it. I notice this video talks about the motor mounts won't work but you are talking about the 5.7 being a 4X4 going into a 2X4 4.7.
Man do you think this would work on a early 4th gen? 09-11? I’ve been doing so much research and can’t find anyone who has successfully done it.
To be honest I dont know maybe the plug in mite be different
Currently trying to put a 4th gen hemi in my 2007 3rd gen i have the 4.7 im asking you think i may need to replace the tranny or would i still be able to run this tranny its automatic and everything just wasnt sure i couldnt see why not its a newer motor yea figured maybe they didnt change much not sure
Youd blow the tranny even trying to baby it. 230->350hp. Asking too much of stock parts
I'm currently swapping a 2007 4.7 4wd with a 2004 5.7 2wd. The connections on the transmission/transfer case are not the same. Is there any fix for this?
Did u find a fix for this? Because I'm afraid I'm going to run into this problem ... I have a 2007 engine that I'm putting in a 2004 Dakota.. both 4.7 but I believe one is 2wd and the other is 4wd..
I’m doing a 4.7 5.7 swap my truck is a 2 wheel drive 05 the donor truck is a 5.7 4 wheel drive 03 will The harnesses and control modules transfer over?
Hi yes you have to transfer all the wires from the 5.7 to the 4.7
yes
im doing a 02 dodge 1500 4.7l to a 5.7l from a 03 jeep donor. should be interesting
Nice yes should be interesting hope everything goes well
I have a 2002 4.7 dodge ram , my last engine was blown and then I got a new engine they told me it was 2002 engine but once it was inside the truck they told me it was a 2005 engine but still a 4.7 . Everything pretty much fit good except they told me I have to change the reluctor ring or the computer . I was wondering if you can help me out with this problem because due to this I’m not able to start the truck at all it cranks and everything but won’t start
The crank tone ring and timing wheel most likely, if the 8th vin digit is an N it's a 4 plug (NgK engine) so if your computer has 3 plugs but you got a 4 plug engine you've a lot of work to do, most likely pull it back out to change crank tone ring and timing sensor wheel. Better off trading the engine
What year was the 5.7 motor
Brother did it sound any louder? compared to the 4.7
Hey what's up well it sounds way better then the 5.7 and as you can see I have a k&n and throttle body spacer it sounds ever better
Do you know if it would be the same process on a 09-12 ram 4.7 to 5.7
I don't see why not everything should be the same
Do you have cruise control
Question: I have a 2006 Dodge Ram 1500 4.7L, wanting to change to 5.7L hemi. Do have I have to stick to the same year truck or do I have maybe 2 or 3 years to choose from? Thx.
I’m In the exact boat looking to do the same thing with my 4.7. As I understand 02-08 is the 3rd gen which we have
@@rileycarpenter8312 In my search for a donor truck, I actually ended up buying an excellent condition 2011 5.7L Hemi for a great price. So I'm going to sell my 2006 4.7L.
Question I swapped my engine from my 03 ram 1500 4.7 to my 08 ram 1500 4.7 as well also swapped harness and computer but I get no power to my instrument panel or cluster. Doesn’t crank or nothing
You need 08 harness all of it cab engine bay
I have a 2011 ram 2 wheel drive, does the 5.7 have to be the same year?
No
I have a 02 ram 2wd with the 4.7 an I have a 05 ram 2wd doner truck with the 5.7. is the motor mounts the same or not ?
no
Did you use your same transmission. The 47re. I did the 5.7 swap my truck is an 02 and the motor is out of an 04. My transmission was working fine b4 I did the swap and now my transmission is stuck in 3rd gear. Limp mode.. it’s drivable but it’s stuck in 3rd. I was just wondering if anyone had the same problem. I also changed the tcm as well.
Yes I use the same transmission from the 4.7 because it's 4x4 and the doner was 2 wd
@@carloszng5 I got a99 Dodge needs tranny I found a Dodge data go the pump in the front of tranny's smaller so the tork converters smaller can I'll get tork converters that will work for 4'2
4by 4
Igot num for both
I Have A 2003 5.7 and it spawn A baring so I brought A 2007 Jeep compass with 5.7 Hemi I got all the wiring but still kinda lost what All u think I need to chang I already have the Jeep motor n Trans in my truck n Computer hooked up
Whats up is everything plugged in already
Not yet I will be back home this friday to update u
did you have to hotwire the fuel pump?
??
Tengo 2003 Dodge Ram 1500 cabina regular con motor 3.7L y quiero cambiar por 5.7L quiero que me sugieras que si le queda o cuales son los cambios que se tiene que hacer
Mandame un email con tu numero y te llamo y te digo lo que vas a ocupar
carloszng3@gmail.com
Hola Carlos tengo una Dodge Ram 2003 1500 se me fregó el motor de 3.7l y le quiero una 5.7l quiero saber saber cuales son los cambios y que necesito hacer por favor si puedes sugerirme.
Would this apply to a Dakota 3.7lv6?
To be honest idk you trying to put a 5.7 ?
Did you change dash harness as well? Did you have to swap fuel pump and anything? Or just the line for it
No dash harness no same one . And fuel pump the same one the only one you have to change is the fuel line that goes to the engine real that's all
What year 4.7 do you have? Is it past 04?
Also did you have 3 plug computer or 4 plug or the 2 separate computers one for engine or for Tranny?
And what year hemi did you go to?
The 4.7 was a 03 and the computer I had the 4 plug in same goes with the hemi one I put same computer runs the transmission
I'm down grading from a 5.7 to a 4.7
Do you know if you could use a late model 5.7 ?
What yr ?
Can you swap the location for the alternator and the ac
On the 4.7 and 5.7 the both have each part in the opesit side so you have to go where ether one goes
Would it be the same procedure for a 04 ram with a 3.7v6 to a 5.7hemi?
Yes
Did you have to program the key skim to the new ecu?
No
Transmisión?
Did you change the steering column? I'm doing same swap on a 2002 ram 4.7. Nice swap and info.
Hi and no I did not change the steering column you don't have to
Why would you? I’m confused. Why?
@@jmemixx Some trucks have the steering routed a bit differently.
I have a question, would you be able to email that list
What if ur truck is manual 4.7 and u wanna swap 5.7
I don't think that should be a problem
So I can swap my 4.7 to a 5.7 using same transmission? It’s an 02 4wd
yes
I'm having this done right now. My mechanic is stuck with the throttle. Coming from the 4.7 it was a cable and the 5.7 is electronic. How did you bypass this?
You need the box Thats under the Battery
@@carloszng5 do you, can you or refer me to a video on that install? My mechanic is driving me crazy and I need my truck back
Message me on Facebook
facebook.com/profile.php?id=100003962208606
I pm u please help me my brotha
Be nice to have a printable list
Quick question do you know if I can use a 07 5.7 Durango to swap my 4.7 ram ?
If vin is d yes
yes but u may need to get ur dash wiring harness from another ram w the 5.7 motor and u cant use the motor mounts from the durango.
cool, now I just need to find a used 5.7 out of a rusted out totaled truck
Nice and yes that's a doner
pro trick: watch series on Flixzone. Me and my gf have been using it for watching a lot of movies during the lockdown.
@Grayson Elijah Definitely, I've been watching on Flixzone} for months myself :D
@@carloszng5 Ended up selling the 4.7 and getting another c/k series truck. Much much more engine bay space to work, I like my wrenching shade tree style. lol
did the petal box come off the 5.7 or is there one also on the 4.7 that will work
Came off the 5.7
@@carloszng5 thanks
Will this work for 03 Durango
I don't see why not
Hello ..I have 5.7l I want to change it to 4.7l what do you think 🤔
Dont Do that keep your 5.7
Thanks por preocuparte por la jente latina 🎉
Todavia tienes el 4.7?
Si todavia lo tengo
On the 4.7 to 5.7 can you keep the ac and alternator the same
Hi no you have to use the alternator and the ac compressor from the 5.7
You would need the hose from the 5.7 ac because it's a lil longer
You using the 4.7 transmission?
Yes the 4.7 transmission
so how were you able to get it smogged ?
What you mean how I was able to get it snogged ?
@@carloszng5 smog check. How do they smog it now that it doesn't have og motor
Aye brotha, could you send me that same list?
So will 4.7 4wd and 5.7 4wd be the same motor mounts?
No
Is it posible to go from the 5.7 to the 4.7
Yes
Yeah, but why would you do that?
What if both trucks are 2wd are the motor mounts the same then
I would know sorry but wen I went to the dealership they said yes but wen I did my swap they were not
Carlos Zuniga oh ok how long did it take you to install all the wire harness and stuff
I recommend to take off the one off your truck first and then the doner should not take long if you take your time in a few hrs
Carlos Zuniga ok thanks
Mines an 02 4x4
What kinda tuner did you need
I got a diablo tune
@@carloszng5 great info thanks in doing the same thing ...should the tune or can the tuner be pretuned for that engine
Would the 5.7 bolt to the 5 speed transmission
Yes it should
Yo how much would you charge me to swap my truck !
I can help you out if your close by me
@@carloszng5 what state you from ?
I'm in California
@@carloszng5 what part in CA?
Are the 5.9 motor mounts the same as the 5.7 engine mounts?
If you have the 5.9 I would keep it it might have less power but is more reliable than the 5.7,
@@sotos2428 im selling it now
@@sotos2428 false
@@yayoinkdab5883 false?
@@sotos2428 yes, as in not true
Transmission are the same
Yes
Hola espero y aún estés activo, me gustaría saber si a mi camioneta Dodge ram 2004 motor 4.7 le es compatible un motor 5.7 Hemi ??
Eso es lo que esta esplicando en el video,
Que vas a necitar un chingo de cosas del 5.7 para que tu troka jale..
Que sale mas bara tener una troka 5.7 para sacarle partes porque no son iguales los motores
so if i have a 2 wheel drive 4.7 it will fit a 2 wheel drive 5.7?
Yah
Engine mounts first thing you need
Could send me the list
I don't have it down but in the video I say everything you need
Alright thanks
@@stubbs0610 no problem
Hello sir...what year is the 5.7 you installed...I'm going from 2003 4.7 to 5.7...same year. Both 2 wheel drive...will my current harness work? Thanks
Hi my 4.7 was a 03 and my 5.7 a 04 and on the wire harness the 4.7 one will not work with the 5.7 basically you need all the wires that are in the engine cab for the 5.7 and computer
@@carloszng5 thank you sir
Any time
puedes hacer un video en español con el mismo contenido?
Si
Para hacer un swap de uno ram 1500 que tenia 4.6 original a un 5.2 de 1500 ram se tiene que modificiar muchas cosas ??
De 4.7 at 5.2 la verdada no se
Si en español carnal
Any Dodge motor Odin phoning the number 7 are junk
You don't like the 5 .7
@@carloszng5 I've got a hive9 gas motor twin turboed in my Ram I'll take on any Hemi any day
Good for you
@@carloszng5 I got a 99 Dodge ram 4by4 4'2 motor 318 found a 4 by 4 from darango pump in front small ier so converter don't fit can I get converter with ringgear to match
Porque si habla español y lo publica en titulos en español habla en ingles jajajajajaja
Do the transmission match i had a family member give me a 2wd with 5.7 and I wanna swap my 4.7.
Theb trans from the 4.7 will work with the 5.7
@@timreeves5524 thank you