How To Install Power Locks Mazda B2200 B2000
Вставка
- Опубліковано 10 лют 2025
- Power lock kit (alternate): amzn.to/2UIAFB2 (Affiliate)
This kit is what we used but is out of stock: amzn.to/3dCVSS4 (Affiliate)
You can find out how to install a switch here: • How to Install a Power...
I'm going to be showing you exactly where I placed the actuators inside the doors clearing all moving parts and glass. I also show you how to route your wiring and where I installed my central lock unit to control everything.
If you are comfortable with wiring and would like to save a couple bucks, here are the parts that can be bought separately for cheaper:
2 Actuators: amzn.to/2ThjSk5 (Affiliate)
Central Lock Unit: amzn.to/2H7AMQ3 (Affiliate)
Some tools you will need is going to be:
Phillips screwdriver, Drill, 1/8 Drill bit, Electrical tape, Zip Ties, Allen Wrench, Blue Loctite
→ Support the channel here: www.flakegarag...
→ Follow us on Instagram: / flakegarage
→ As an Amazon Associate I earn from qualifying purchases.
→ Check my Amazon page: www.amazon.com...
Disclaimer:
Due to factors beyond the control of Flake Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Flake Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Flake Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Flake Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Flake Garage.
Intro (0:00)
Kit Overview (1:00)
Price (1:38)
Passenger Door (2:31)
Passenger Actuator Installed (6:13)
Driver Door (8:00)
Driver Actuator Installed (9:39)
Prep for Wiring (10:17)
Wiring Explained (11:49)
Power Lock Switch (13:20)
Wire Routing (14:20)
Central Unit Location: Ground + Power (17:47)
Summary (19:17)
#mazdab2200 #mazdab2000 #powerlocks #powerlockinstall #howtoinstallpowerlocks #mazda #b2200 #b2000 #regularcabpowerlocks #mazdab2200powerlocks #mazdab2000powerlocks
If this isn’t the best Channel for Mazda b2000 stuff idk what is
Thanks bro. Really appreciate the support
Here and Mazdamitch are the only ligament sources of knowledge for the 86 - 93 B- series
Thank you bro. I def learn a lot from mazdamitch myself and hoping to give some more information to the b series family
My guy, you’re under appreciated. I applaud you and your choices of basic & thorough videos
Thank you, I appreciate the support!
Nice install vid. btw Grant is a secret b-series hero!
Thanks, and definitely a solid guy
Thanks for the video ima be 16 and I’ve been saving up a lot for 1989 and I’ve been doing a lot of research and I’m honestly super excited
Right on, mini trucks are super simple for the most part so hopefully you can find a good one and start your new project! Our videos should help you with some mods
I'm doing this Friday on my isuzu pup can't wait
Def a must have mod. Your truck will feel almost like new 😆 application might be a bit different but if you are using the same kit, all the wiring is the same
Those open section on the lower door is actually for a vent piece on the door panel it's self.. .it helps release cabin pressure....to my knowledge speaker came on lower part of dash left and right and certain models on b pillar behind the seats ...you can see speaker grilles ...knowledge from.my b2000 of years gone by👍👍👍🇿🇦🇿🇦🇿🇦
The section close to the door hinge where my speaker is has nothing from factory on that spot. Only the other ones where I was initially trying to put the actuator is what had vents but as you can see on my video, I don't have factory door cards or vents so there's no need for them on my doors. You are correct, speakers factory came in the dash for regular cab, for extended they came in the b pillar or extended part of the cab. I haven't come across a regular cab with factory wiring on the B pillars but you might be right and can definitely put some. I did on this video: ua-cam.com/video/54ctVMjeQ7k/v-deo.html Cheers 👍
Were did u get those door clips for your doors to fasten the panel to the door those are nice
Hey i watch your vids all the time very helpful. I need help. I got b2600i and the pull up lock isnt there
Most likely fell inside the door, you'll need to remove the door panel and put it back in place if it's still there hopefully
New subscriber love your content and instructions
Thank you! We got more content coming soon, stay tuned!
Great video, very informative!
Great video
Great video, very informative... Thank you!
You are welcome, we hope it helps you in the future!
Hey man… not sure if you wire up the purple wire to the parking lights but if so to which wire does the purple wire connets to. TIA
ua-cam.com/video/mU-KjYHt0Bc/v-deo.htmlsi=A8u0ZKiODf2eyWSZ
I just got this kit. How is it holding up over time?
Still works like a charm on both the Mazda and the Nissan
Mazda B2600i isn't mentioned anywhere. Does this product not work on it for some reason or have you not tried it? I'm wondering because I have a 1990 B2600I and I would like to get your input. Thanks
Yes, this will fit and should be the exact same process on your 1990 b2600i! I forget about them because they aren’t very common around my parts. Their main diff is the engine but body and interior wise, they are the same as far as I know
@@FlakeGarage thnks the quick response bro!
What seats did you use ? Very nice
Reupholstered factory cab plus seats
Great video, I installed on my own, thanks! Do you have power window videos or links to something that will work with the power locks in this video or separate?
Hey Angel, glad the video helped you! We do have plans to install and do a video on power windows but unfortunately we don't have it yet. Any universal kit should be able to work, you can check any of the kits here: amzn.to/3pFdvGu
Can I offer you an idea? With the two extra poppers. Why not hook those up to the tailgate , and wire them to the same channel on your kit. So the tailgate will pop open.
That would be helpful if you have a shaved tailgate for sure. Not a bad idea but definitely not for me at the moment. I don’t mind my tailgate how it is
You could do the same thing for your hood pop also. It’s simple stuff an would be good content that would fit in with the simple upgrades you do.
Hey! Nice tutorial I have an 87 b2200, are you going to install an alarm too? I found an installgear one, but i don't know if I have to install the power lock first or just buy some separate actuators and add them to the alarm
We don't have immediate plans for an alarm at the moment but I'd recommend you get it all preferably in one kit so that way it's less problems trying to match two systems together
Hey what’s up I am looking for a tunnel cover for a extended cab ?
Check description and I’ve also heard the ford ranger covers fit the extended cab but cannot confirm first hand
hey man i installed the kit today but whenever i press the lock button on my key fob my truck will lock but right after it unlocks so it can’t really lock do you know what could be causing this?
I’d check all wiring and make sure nothing is connected wrong, wiring in the box and the door locks. Sounds like maybe a short or something that’s making it open again
Any way to put an actuator in the tailgate and make the trunk button open the tailgate?
Where there is a will, there’s a way. It won’t be easy but you’d have to modify the handle to be able to lock and unlock and have it open with a button or something. It would be a very unique tailgate for sure
You would have to cut out and weld another trucks tailgate locking mechanism and handle that actually locks before you could get the tailgate to lock and unlock with the actuator. I have plans for that in the future. Maybe I'll post a video. 🤔
Good video bro 👉🙏👍👍👍👊👊✌✌
Thank you bro! We got one coming up for the hardbody as well!
@@FlakeGarage thank you bro have a blessed day👉🙏👊✌
would this work for a Mazda bravo b2500
it's a universal kit so I don't see why not
Hey if you have time would you possibly correspond in email I have a couple things I’d like to talk about with my same truck