Це відео не доступне.
Перепрошуємо.
HOW TO REPLACE THE TRANSMISSION COOLER FILTER OF A 2015 LANCER
Вставка
- Опубліковано 19 жов 2021
- This is a Do It Yourself video on how to replace the transmission cooler filter of a 2015 Mitsubishi Lancer. A very easy project that will make your transmission last for a long long time! Thank you for watching and if you find this video helpful... please like, share and subscribe to my channel.
God bless you as well!! This is a tremendous video and your attention to detail such as mentioning the O-ring and why the new filter wouldn’t fit in was excellent! Video quality and sound was also fantastic. I have a 2012 outlander with the CVT and this is virtually identical so this helped me out tremendously. Thank you 🙏
Thank you so much for your beautiful comment! Have a wonderful day ahead and God bless!
This was a great video, thank you for making it. Also thanks for keeping in the part with the old seal. Shows a great catch for something that can happen easily and often.
Thank you so much for watching and have a wonderful day ahead.
Nice tutorial. I changed the same filter on a 2017 Outlander Sport last week. The location of the components were about the same as your car. The bottom screws holding the battery bracket are tough to get at and the last screw holding the transmission cooler next to the engine was tightened from underneath. The job got completed thanks for showing the way.
Good to hear that everything went well. Thank you for watching the video. Have a wonderful day ahead.
Excellent attention to detail. I have been searching for such a video to change this exact filter on my 2013 Nissan Rogue. As it turns out, the location and steps for my vehicle are almost identical. Glad I came upon your video during my research. Great work! God bless you as well!
Thank you so much for watching and good luck on your project.
I also use the "OBD POWER CONNECTOR TO CONNECT ANOTHER BATTERY for keep my ECU Memory" And then follow your procedure. Great job thanks your video.
That's a very good idea, so you won't loose anything when you remove the battery connection. Thank you for watching and have a good day ahead!
Great video for those with outlander sports/RVR/ASX as they share the lancer chasee and have the transmission filter up front as well. So many people and mechanics don't know about this filter and i fear never get changed. You need to, especially if you have a CVT!
That's correct, because even if the transmission fluid is change regularly the dirty filter will restrict the flow of fluid. Thank you for watching and have a wonderful day ahead.
🙏 thank you. I replaced fluid couple times but didn’t know about this filter. Will do next time
Thank you for watching and have fun doing your next project. Have a wonderful day ahead.
Awesome video! I love how you include your mistakes, nobody else does that, it’s very useful, and I love your intro! Keep up the good work! 🥰
Thank you so much for an awesome comment. Really makes the day brighter. Have a wonderful day ahead.
Best very Details how to video . Thank you much . I’ve Mit Outlander 2016 if the same filters .
I don't have any knowledge on the outlander cooler filter but here is a link that might help you with what you need...
ua-cam.com/video/Ph926qQmLOg/v-deo.htmlsi=EjZ1t_EkorB3Rvyn
The dealer is the best way to get the parts. Thank you for watching and have a wonderful day ahead.
A great instructional video Thank you for uploading this valuable knowledge on you tube.😊😊😊
You're welcome and thank you for watching. Have a wonderful weekend!
Hey brother great job i had recommended u do this last week...thanks for the video i am doing it soon
Finally did it... thanks for the support and always stay safe!
Great video! I have a 2011 Outlander and this is perfect!
Thank you so much for watching and if your vehicle is an Outlader, I encourage you to check out this link
ua-cam.com/video/Ph926qQmLOg/v-deo.html
It might be helpful. Thanks again and have a wonderful day ahead!
Hi Lolo Groovy! I hope you could upload more videos for your Lancer tutorials. God bless 😊
Maraming salamat AK NAYAB for watching! Rest assured I will post more videos. God bless!
Thank you very much for making the video, it was quite helpful. Cheers!
Thank you for your time watching. Have a good one my friend.
Hi Lolo groovy ANG Galingmo Naman
Big thumbs up for you
Happy weekend
Thank you for watching AK NAYAB. Keep safe always and enjoy your day!
Thank you so much! I am doing this right now and wanted to know if youtube had a video about it. You did an excellent job explaining it. By the way, do you happen to have part number for filter and o ring?
Glad it was helpful!
Part No.: 2824A006 is for the cloth filter in the cooler. Part No.: 2920A096 is for the rubber O-ring.
Thank you for watching and have a wonderful day ahead.
Wow 😮 may natutunan nanaman ako sayo kabayan ,,longtime no see how are you doing these days ..keep safe po lagi dyan..Nood hangang dulo Po .🙏
Hello there... thanks for spending time watching and always keep safe and healthy. God bless!
Wow GaLinG nmaN ni LoLo groovey nice sharinG video
Good vid. Lucky you caught that old seal. I had that happen with an engine oil filter seal. Thanx
I had an experience with the seal of my engine oil filter and it was a mess when I start the engine. Have a wonderful day ahead and thank you for watching!
Wow GaLinG nmaN ni LoLo groovY sa repairinG nicE sharinG videO
Thank you for watching. Keep safe always and God bless!
Hi Lolo. Thank you for this video. I have a few questions:
1. Is it same procedure for 2018 outlander?
2. I already got the cvt fluid changed by dealer. Will I need to top up the fluid after I change the filter now?
I'm not familiar with the outlander, but if your transmission cooler filter housing location is same as in my video... you can change it. Because the position of the filter is higher than the transmission. The only fluid that will leak is the one in the filter housing. Estimate the fluid that will come out and put the same amount back will be much better.
Just to verify, I have a link for a 2016 outlander and please compare the location of the filter housing with your car. If this is not the location then it should be under the battery same with the Lancer.
ua-cam.com/video/Ph926qQmLOg/v-deo.htmlsi=-x46ZLTbcMOHRFt2
I hope this will help.
Good luck on your project. Thank you for watching and have a wonderful weekend.
hi lolo groovy, thank you for your video, i appreciate if you can make simple schedule on excel sheet and share here. thank you lolo, more power on your channel.
Thank you for watching AK NAYAB. I'll try to do it next time. Keep safe and have a wonderful day ahead!
Galing pala ninyong mekaniko lolo Groovy👍
Maraming salamat ulit ng marami AK NAYAB! God bless!
Ang dami mong Alam Ak Nayab pagdating sa sasakyan.. great sharing.. 👍...
Maraming salamat sa walang sawang suporta AK NAYAB! God bless
Thanks my friend for sharing so nice video
Wish u always healthy fun
Thanks for spending time watching. Keep safe always and God bless!
Good video Lolo. Meron din po bang transmission cooler filter ang Lancer ex 2014 model? Thank you, Lolo Groovy. Ingat po palagi and God bless po.
Maraming salamat sa suporta AK NAYAB. Palagay ko mayroon ding transmission cooler filter yang Lancer EX mo. Hindi lang ako masyadong pamilyar sa ganyang modelo. Subukan kong mag research at pag may nakita akong information Message kita. Maraming salamat ulit at God bless!
What brand and size of universal socket ast you are using?
Its a 3/8 universal socket adapter from Craftsman to remove the plate that holds the battery. Thank you for watching and have a wonderful day ahead.
Hello Lolo I'm new to your channel , because of this video, now I know there is an extra filter for the transmission on the Mitsubishi lancer, I'm about to go see one and buy a 2015 Mitsubishi lancer with just hit 70.000 the owner claim he have never change the transmission fluid o it,do you think is safe to buy. Owner claims the car drive fine Thank youTony from Austin tx
Most CVT cars recommend to change the fluid at 60,000 miles. Sorry I can't make a comment or suggestion... cause I don't know the driving history of the car. CTV transmission is very tricky... somtimes problem will show up when you change the fluid! Better to have a good mechanic take a look before you decide. Thank you for watching and have a good one.
Hi Lolo, how often should you change this cooler filter? I just gave my lancer to the garage for a fluid change (97k kms) I believe they only changed the fluid, gasket and screen filter.
I change the filter same time with the transmission fluid. The ideal interval is every 50,000 miles. Thank you for watching and have a good day ahead!
Haha, I have done that before with the seal! Gotta check things really well and not force anything if it does not fit.
I learn new things everyday but unfortunately some are from my mistakes Hehe! Thank you for spending time watching and have a wonderful day ahead.
Thank you, gonna do this to mine✌🏻
Thank you for watching and enjoy the project!
Ang galing mo naman Lolo
Konti lang hehe. Maraming salamat AK NAYAB. God bless!
Do you have the part number for the o ring you took out at 5:30? Please let me know, thank you
I don't have the part number anymore. It was purchased from the Mitsubishi dealer and I just gave them the VIN#. Thank you for watching the video. Have a wonderful day ahead.
Is this a ctv transmission or automatic transmission
@@juniorhyman my 2015 Mitsubishi lancer has a CVT transmission.
What did you torque the transmission cooler filter housing to. ? Would really appreciate it because I can't find any torque specs for my lancer anywhere.
I couldn't find any torque specs for the cover too... I only hand tightened the bolts! Thank you for watching and keep safe always!
35 inch pounds
I have Lancer 2012 GLS EX CVT. We found oil in cooler and after inspection it was found that Gear cooler is faulty and mechanic asked me to replace it. Do we need to change the filter as well and what about transmission oil. Please guide
If the transmission fluid is contaminated with engine oil, its better to replace the fluid together with the filter. The transmission might slip because of the engine oil.
My Mitsubishi Lancer 2014 the radiator coolant the color turn pink think mix with some oil
Thank you for sharing!!
Thank you for watching my friend!
Very good video
Thank you so much for watching!
What is the OEM part number for the "O-Ring" on transmission cooler cover? Can someone send me a website link to purchase that O-ring?
Try this part number: 2920A096 but check it out first before buying or better if you can go directly to the dealer. Thank you for watching. Have a good day ahead.
Hi do we need to drain the oil before doing or can we change at the same time.
The filter can be change the same time while draining the oil. Thank you for watching and enjoy the day!
My car has an irregular idle when driving my mitsubishi asx auto. Could the filter be a problem. Also are there sensors on the gearbox
There's a lot of reasons for a car to have an irregular idling. If I were you, I'll have a good mechanic check it out. If your car is equipped with transmission cooler filter, might as well change the filter.
It is cheaper than breaking the transmission. Thank you for watching and have a wonderful weekend.
I already change my oil cooler and the coil filter but still the color of radiator coolant turn pink that makes my car overheating Mitsubishi Lancer 2014 please help me to solve the oberheating
Check your engine oil dip stick and the oil filler cap, if the oil is cloudy or mix with anti freeze it might be a blown head gasket. I'm not sure why your anti freeze is contaminated. Better take it to a certified mechanic to have if properly check before it gets worst. Good luck and hope it'll be fix. Thank you for watching.
hi, do u have to drain all the fluid out ? is it ok to change just the small filter ?
If your fluid is still good you can change the cooler filter without draining the fluid. There's a little amount of fluid in the housing which will spill out. If possible , estimate the amount of fluid and put the same amount of fluid back. I hope this will help. Thank you for watching!
Very good video and well explained. Do you know if the 2013 Outlander has this filter in the same area as this Lancer?
I hope this video helps you with what your looking for... ua-cam.com/video/Ph926qQmLOg/v-deo.html
Thanks for watching and have a wonderful day ahead.
@@lologroovydiy thank you very much for the other video you sent on the paper filter.
If I changed oil 2 months ago I can still do it. I will have to add oil?
The positon of the filter is higher than the transmission, so you will only lose the fluid that is in the filter housing. Yes you can do it; just calculate the amount of fluid that will drain from the housing and put the same amount back. Good luck and thank you for watching.
Keep em cool as many ways of reduced coolant water ratios, both filters and best cvt fluid each 30k, seal all leaks of radiator plenum, keep radiators clean.
You've got it right! Thank you for watching.
nice sharing. great help. new supporter :)
Maraming salamat sa pag suporta AK NAYAB! Keep safe always and God bless!
How do you access the bottom 10mm bolt on the back side of the transmission cooler housing at 2:44
Use a 1/4 inch drive socket wrench with extension. A bit tricky though. Thank you for watching and have a good day ahead.
Hi @Lolo Groovy Diy! my 2009 lancer es is leaking transmission fluid on the front passenger. do you have any idea where its leaking from?
Try checking the area where the inner right axle is connected to the transmission. If the area is wet with fluid, the rubber seal might be weak or damage. Good luck and thank you for watching.
Thank you lolo!
Lolo I love your videos I have done the cvt fluid change and filter and now the Inter cooler filter. However the paper filter I received is about half cm bigger. (Yes I did make sure the gasket was off from the previous filter) I had to fit it there a little tight but I was able to close it back up with a new o ring and was able to tighten up the bolts and saw no leaks. Do you think I should be safe?
As long as the fluid level is correct and you don't have a leak... it should be fine! Drive it for a while then check the fluid level and check for leaks again, just to make sure. Thank you for watching.
@@lologroovydiy my car is cvt, at what miles Ineed to change the filter?
@@rosarioexecutivewhen you change the cvt fluid, you can also change the cvt cooler filter. Check your owners manual but for me I do it around 50 thousand miles.
Do you by any chance know the torque of those 4bolts?
Can a bad filter make the transmission to heat up while going up hill? I have a 2014 and it heats up everytime i tried to road trip going up a mountain.
If the filter is dirty, it will restrict the circulation of fluid and might cause a problem. Thank you for watching and have a wonderful day ahead.
Does the 2016 Lancer have the same filter
Should be the same. Thank you for watching.
5:37 did you just playback in reverse that part? lol.
thanks for video... i have outlander sport 2015, do i need to change mine too? its over 100k km
You have very sharp eyes. Check your owners manual it should say how many km before you change the fluid. I change mine at 60,000 miles. Thanks for watching and keep safe always.
good video
Thanks for watching my friend!
The autopart store didnt have the filter. Where did you get them from?
I purchased the parts from the Mitsubishi dealer. Thanks for watching!
very useful, and informative video, thanks for it!
Will do a CVT oil change in my 2008 Lancer. Sump filter was recently changed, but the cooler filter wasn't.
Do I need to drain all the oil from the transmission to change the cooler filter?
my other problem is, I cant get my hands on genuine Mitsubishi CVTF J1, will Motul Multi ATF work for me?
Thanks in advance!
You can change the cooler filter without draining the fluid. There's a little amount of fluid in the housing which will spill out. If possible , estimate the amount of fluid and put the same amount of fluid back. After market filter is ok, as long as all the specs are the same. I hope this will help. Thank you for watching!
@lologroovydiy please share the link to buy the filter; thank you!
Part No.: 2824A006 is for the cloth filter in the cooler. Part No.: 2920A096 is for the rubber O-ring for the housing cover. Good luck on the project. Thank you for watching and have a wonderful day ahead.
If i change this cooler filter without emptying the transmission fluid. Is it ok？ Or it will leaks when i remove the cooler filter housing？ Thank u
I didn't drain the fluid when I replace the filter in that video. Make sure to place paper towel or clean rug under the housing cause there's some fluid sitting in the cooler housing. Good luck and keep safe! Thank you for watching.
Thanks
First lolo galing mo talaga
Paminsan minsan AK NAYAB! Salamat ulit sa pagbisita. God bless!
hi lolo, can I change this filter if my transmission oil is full? would it leak a lot of oil? Thanks!
Yes, you can change it. Because the position of the filter is higher than the transmission. The only fluid that will leak is the one in the filter housing. Estimate the fluid that will come out and put the same amount back will be much better. Good luck on your project. Thank you for watching and have a good day ahead.
Hi, my Nissan Murano cvt is experiencing about 5 6 seconds delay when gear shifting. Sometimes, it doesn't engage at all. Is that a symptom of a dirty cooler filter? FYI, I just had fluid change and washed the strainer. But the issue persists. The mechanic had no idea about the external cooler filter. Thanks in advance.
If your car is equipped with a transmission cooler filter, you can try and replace it. I hope the problem goes away with changing the filter. If the problem still persists the best thing to do is have it check by an expert. Thank you for watching and hope the problem will be solve.
Are you sure the mechanic poured the correct CVTF NS3/J4 fluid ❓🤫
Can i take the tubes connected to the housing off? I'm having trouble trying to get that bottom corner screw off
I didn't remove the rubber tube because it might leak. You can try... just make sure that there's no leak! Thanks for watching and good luck on your project
@@lologroovydiyhow did you reach that bottom corner screw? I am having trouble reaching it?
I use a universal joint socket adopter to remove the volts. Thanks again and good luck on your project.
I am hanging trouble finding where to purchase for 2011 MIT Lancer ES
Try ordering it from a dealer... they should have the parts for your car! Thank you for watching and good luck.
Is this the same procedure on a 2018 Mitsubishi outlander sport transmission?
Or is it under the car?
I haven't work with an Outlander and not familiar with the transmission filter location. Here's a video that might help you with what you need. Thank you and have a good day ahead. ua-cam.com/video/Ph926qQmLOg/v-deo.html
@@lologroovydiy
Thanks a million!!!!
How do you know if it’s time to change the filter will the transmission start slipping
I change my CVT fluid and filter at 60,000 miles. My plan is to change it again after 35,000 miles. Thanks for watching!
Thanks for the video am also doing it tonight
But have a problem with my lancer now days model 2016 there’s how to bring high sound inside like a sport car once it’s neutral u can here that sports sound what can I do please?
Thank you for watching my video. Regarding the high sound you're experiencing with your car... I feel that for now I don't have an answer. There's lots of places that the noise can come from and the best way is to have a certified mechanic to assess the problem. Good luck and I hope the problem would bee fix!
Before you change this up filter have you drained the transmission fluid, or it’s alright to take off top filter without draining all the fluid.
If your transmission fluid is still good... you can change the top filter without draining the fluid! Estimate the fluid that will drip out of the housing and replace the same amount back. Thank for watching and have a good day.
@@lologroovydiy thanks 🙏
Is this the same procedure for the 2017 Mitsubishi Outlander SPORT ES?
I have no knowledge of the Outlander cooler filter change. Here is the link of a video that might help ua-cam.com/video/Ph926qQmLOg/v-deo.html . Thank you for watching and good luck on your project!
@@lologroovydiy thanks
Great lolo. Big help, especially to those have cars
Thanks for your support and always keep safe. God bless
I have lancer 1.5 AT ( not CVT) is this is only filter that my transmission have or there is another one ?
I'm not familiar and have not come across with the model of your vehicle. I'll look for information regarding the filter for your vehicle. My lancer have a screen filter inside the transmission pan. Thank you for watching and good luck.
@@lologroovydiy your lancer is CVT?
@@ivicatasik7923 yes its CVT.
I drove 45000 kms after changing cvt gear oil . When should I change it again
Model:2014 lancer gt
I replaced my filter every 50,000 miles. If I have the time maybe I'll replace it even at 30,000 miles. Thank you and have a good day ahead.
Lolo, how about changing fuel filter of lancer. Thanks.
Maraming salamat sa suporta AK NAYAB! Hindi ko pa napalitan yung fuel filter ko, kaya wala pang video. Naka schedule to next year bago mag summer at malamig na dito mahirap gumawa. Yung fuel filter ng kotse ko doon sa loob ng gas tank. Pump at filter assembly. Keep safe always AK NAYAB at God bless!
Very nice presentation, how can you say about Nissan CVT transmission, that normally gets hot and loose power, is there any remedy? ?
I'm not familiar with Nissan. But there's this video that I watch that might give you a good explanation. ua-cam.com/video/j60a8pZjc-s/v-deo.html
Thank you for watching and good luck.
@@lologroovydiy I've found that my 2013 Nissan Juke AWD hides its filter in the same place as yours! Although not exact, it's VERY similar with the only difference being the routing of the pipes. Other Nissan CVTs have the filter located in different places. Those are also on UA-cam, but this is the only video even remotely close to mine!
@@johnhouchins3156 good to know that!
Salamat tay
Salamat din sa pagbisita AK NAYAB! Keep safe always and God bless!
Tnx
Ano pong engine? 4B10, 4B11..ano po ba? If ever ba.. same lang ba ng cvt cooler filter mga yan o iba na po ang size/spec? Baka me idea po kayo ng para sa 4B10 engine ng part number baka pede pa share. Salamat po..
Nag search ako ng parts pero ang hinahanap nila yung VIN number ng sasakyan. Kung wala yung VIN# hindi nila alam kung paano ang gagawin! Sorry at di ko masagot ang iyong tanong pero mag try pa din ako. Keep safe always!
Lolo did you just replaced the transmission filter cooler or did a flush? and what are those extender you using for the ratchet to reach the bolts underneath the battery stand? 1/2 drive or 3/8? salamat po
Thank you for watching my video! I just replaced the transmission fluid and the bottom filter. The size is 3/8 for the extension. Thanks again and good luck on your project AK NAYAB! God bless!
Hello bro...I have one thing to ask... recently I just change my CVT oil and the bottom filter...but I didn't change the cooler filter...can I change the cooler filter after the CVT oil change? Tq in advance
Yes, you can change the cooler filter. Just make sure to place a plastic sheet at the bottom of the filter housing to catch the small amount of fluid that will drip. If possible measure the fluid that comes out and put back the same amount. Thanks for watching and stay connected.
Thanks you you are so much help!🙏🙏🙏🫡
You're welcome and thank you for watching too. Have a wonderful day ahead.
Will this be the same for a 2015 Outlander Sport 2.4L ?
I'm not familiar with the Outlander engine and very sorry I can't answer the question. Thank you for watching!
Yes is the same I just did it
Lolo... what would happen if you run the Outlander without that filter to see if the pressure returns to normal?
I have no idea what would happen... maybe if you have a dirty filter it would change the reading but if your filter is clean with or without filter it should be the same! Keep safe always and Thank you for watching.
We can used the same of nissan J32 part 31726-1XF00. (Cost saving)
I'm not sure. I only used the Mitsubishi filter brand. Thank you and good luck on your project.
It is the same part. (Jatco CVT) It can replacement
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you for your support my friend.
Can you provide a link to buy it?
I bougth the transmission cooler filter at the dealer. If you have Mitsubishi dealer near you, it's more reliable and you'll get the exact parts for your car. Thank you for watching and have a good day ahead.
My dealer said that part isn't serviceable, they wanted me to change the whole part.
I already change my filter twice and also purchased the filter from a Mitsubishi dealer. Good luck and hopefully they sell you the filter.
@@lologroovydiy my car warning came on and said "slow down" I think the transmission was getting too hot.
Maybe the fluid circulation is bad because of a dirty filter.
@@munoz_rottweilers3238 Yes, several mechanics have stated that when this filter gets clogged, it can cause overheating of the transmission. Ideally we want to do the maintenance ahead of time to prevent this. This is why I'm now on a 30,000 mile schedule to change the fluid and both filters. This one and the one in the pan underneath
@@fitcwebb they never recommended I change the filter and I take it to the dealer for service all the time. I finally got it changed tho after requesting it
Is your lancer automatic transmission?
It's an automatic CVT transmission. Thank you for visiting my channel and have a wonderful day ahead!
Noce DIY loloGroovy!
Thanks and God bless!
God bless us all! 🙌🥰
Lolo san ka po nakabili ng gasket po?
Sa Mitsubishi dealer ako bumili. Salamat sa pagbisita AK NAYAB. God bless!
Salamat po lolo. Try ko po magpa order sa casa. Kasi laging 2 to 3 weeks ang dating ng piyesa pi
Sir how do you open bolt number 4? It is very tight spaces very hard to reach 😩
Use a 1/4 inch drive socket wrench with extension. A bit tricky though. Thank you for watching and have a good day ahead.
Where do I buy the Filter
I got the filter from the dealer. Thanks for watching!
@@lologroovydiy how much
Is there another cvt oil filter under the car near the drain pan? ua-cam.com/users/shortsU_WV-3-muQw
I think that this is a different Mitsubishi model. As far as I know there's two filter. One is shown on my video and the other filter is located inside the transmission fluid pan. Thank you for watching and have a good day ahead.
no rattle gun
Removed 3 screws and tightened 3 screws. At 4 he forgot ❓😃
It's was so misleading I had a sh*tty time taking the forth one out
2016 is not the same
I think it’s easier.
@truwarrior22 nope I couldn't find it
@@Bighotwheelhunter My bad was thinking the Outlander, it’s no longer a cooler, just a cover.
@@truwarrior22 so I don't have to worry about it
@@Bighotwheelhunter I have over 100K on mine, no issues. Looks like 2016 Lancer has one, 2824A006
How did u get the 4th bolt
Use the same socket to remove the 3 bolts only with extension. A bit tricky though. Thank you for watching and have a good day ahead.
@@lologroovydiy took me 3 hours