10th Gen Civic Sedan Sport
Вставка
- Опубліковано 8 вер 2024
- Visual overview of my lightly moded Honda Civic Sport
2.0 Liter N/A Engine (K20c2)
Performance Mods:
- K & N cold air intake
- RV6 Performance Catted Down Pipe
- MRT Performance Sport Muffler
- Siri Moto Strut Bar
Suspension Mods:
- Eibach Pro Kit Lowering Springs , 1inch drop Front and Rear
- Eibach Rear Camber Arm
Brake Mods:
- Powerstop Drilled and Slotted Rotors w/ pads :Front & Rear
Wheels Mods:
- Stock 18' wheels on 235 40r18 Goodyear Eagle Sport Tires
- 20mm hub centric Wheel Spacers : Front & Rear
Aftermarket exterior add-ons
Fender Vents;
www.ebay.com/i...
Hood vents;
www.ebay.com/i...
Rear Spoiler
www.ebay.com/i...
Weather Tech Hood Protector
www.weathertec...
Awesome car man. Just bought one of these in white a couple days ago. Definitely inspired me for future mods!
Congrats man! And I’m stoked to see how your build develops over time!
This car looks sick man, nice job! I own this same car in blue and you’re already giving me ideas 🤣
Thanks broski. I appreciate the love!
It looks clean and everyone with their own mods but there’s so many things in there that you don’t know where to focus on but I will say get some aftermarket wheels and it might look more better but great job with your mods keep it up
Appreciate the time taking to comment. But, this vid is a vid from almost two years ago. Ive updated the car since then and posted newer vids. Check it out when you have a chance.
ua-cam.com/video/0jtis6aKqEg/v-deo.html
Bro, Your civic is clean! I like the build! Keep up the good work!
Thanks my dude! You know I appreciate it!
Where did you get the tiny little vents on the back two windows?
Hey Chris,
Those small window vents were from Ebay
Bro I love it
Hey man I love your weel setup and I know u already mentioned in comment but could you share the links for spacers and lowering kits, I just don't know much about lowering springs, is it gars to install them?
Appreciate it my dude.
I no longer have the wheel spacers , as I switched to aftermarket wheels with a 35 offset, versus the stock 50 offset from my stock wheels. So I no longer needed the wheel spacers anymore . I dont have a link to them, as I got them from a local shop.
As for the lowering springs, heres the link.
eibach.com/us/1978/E10-40-036-01-22-HONDA-Civic-pro-kit
Also, you should get the rear adjustable camber arms, so you can correct your rear wheel alignment better,and not wear out your tires
heres link
eibach.com/us/1978/5.67476K-HONDA-Civic-pro-alignment
As for install, i had my local shop do it. Wasnt there long.
Sick I have the same civic so many mods on it
Hell yeah man! Thank you!
Ayoo I’ll be posting vids of my car soon I just installed my tomei on my civic
@@theboywiththecivic7908 Right on dude, i’ll check it out!
Hey bro what do you call that black strip that’s in between your front door and wheel?
That my dude is the Fender Vent, got it off Ebay. 😎🤘
Eso sí es una nave espacial
¡Gracias! Ojalá pudiera viajar en el tiempo. ¡Eso sería sorprendente!
How does it ride with the lowering springs? Also. What wing is that?
Should’ve gotten the 6 mt, mine is the 2020 Honda civic sport 6 speed grey, got K&n filter about to get prl inlet hose to throttle body then a ktuner
Hey Matt,
I didn’t get the manual because this guy never learned how to drive one 🤣. I wont bullshit you on that. But even though I could learn, and it aint hard to learn, but living in the suburbs with stop and go traffic, having to drive a manual, wouldn’t be something Id want to live with. However, for me, living in the country with not a lot of stop signs and lights, hell yes,i get a manual my dude.
But having a cvt…does suck, glad you avoided it my dude! And I currently have an AEM Coldair intake with a dry filter and a MRT axle back exhaust with the polished split tips.
@@Broski_Nation like the setup yeah manual does take time to get used to, the cvt to me just feels weird but I appreciate it. Love the build, and yeah stop and go traffic does suck lol
@@Broski_Nation also how you get a cold air intake I can’t find one for the 2.0 none turbo just a high airflow intake which goes where the stock box was lol thank?
Sure, so there were two options i found for the 2.0 liter n/a. K &N air intake with the oil filter and the AEM air intake with the dry filter ( Definitely recommend this one)
@@Broski_Nation there is also a prl intake too but I’ll look it up thanks bro!
hey man. where did you get your front lip bumper?
Hey Boom, The front lip came from ebay.
Where did you get the front hood black cover piece along with the im assuming 3m hood vents
Hey Nathan, so I got the hood black cover piece from weather tech.com. I believe its called a hood protector on their website. As for 3m hood vents were an ebay purchase 😎
Hood vents
www.ebay.com/itm/333609243466?fits=Year%3A2020%7CMake%3AHonda%7CModel%3ACivic%7CTrim%3ASport%20Sedan%204-Door%7CEngine%3A2.0L%201996CC%20122Cu.%20In.%20l4%20GAS%20DOHC%20Naturally%20Aspirated%7CSubmodel%3ASport%7CEngine%20-%20Liter_Display%3A2.0L
Hood protector
www.weathertech.com/honda/2020/civic/hood-protector/
Awesome! When you removed the stock spoiler, did you fill the holes left behind? Or how did you deal with that?
@@2.SlowHoonda Great question. So , on the bottom of your duck bill spoiler, you should have two holes , one on each end of the spoiler, that should line up with the holes left on the trunk from where the previous stock spoiler was mounted at. But make sure you verify first before mounting it on. Once verified, use the 3M double-sided mounting tape, and line it up, and apply down pressure so the tape bonds between the spoiler and trunk.Once done, secure it by using self tapping screws , one for each hole made from the previous spoiler. I went through the bottom side of the trunk and screwed into the aligned holes from the trunk and Duckbill spoiler. I used a self tapping screw that was similar in width as the holes from the spoiler. Id also add a washer so that bolt do go anywhere. And your all set!
How long you had this car and had you drove out of state lately and what type of trim lines
Hey ken, I no longer have this car. Traded it in back in late Janurary this year. Im gonna make a channel update vid on this soon. You thinking about getting one?
Did you wrap the taillight deck or did you buy taillight deck overlays? If you wrapped it could you send me the link of the wrap you used or overlays you got it from?
I had the taillights wrapped at a local shop that does window tint a few years ago. But, you could buy the plastic overlays that has a similar as mine on Ebay.
@@Broski_Nation I have the same color 2016 Honda Civic LX. Your video giving me some ideas to do on my car. I already have a spoiler on my car, I mean it looks mehh cuz it kinda faded as time goes... I really liked how the spoiler looking on your car but the thing is my car has drillings cuz of this spoiler, so I don't think this duck spoiler going to cover those holes. BTW, do you remember what's the percentage of tint applied on the taillights?
@@sananelala2519 Off the top of my head, no. I had the tint applied to my taillights a couple years ago, so I’m not sure what the percentage of the tint is.
Are the tires stock or did you do wider tires for fitment?
Stock tires ( 235 40 R18) with 20mm hub centric wheel spacers.
Lowered it too right?? Because if that’s the case lowering it alone gives the car an aggressive look on stock tires. I dig it.
@@Ohidk91 Thanks Jon. And yessir , I have a set of eibach 1 lowering springs with a set of rear adjustable camber arms. Non issues with scraping or nothing. T
@@Ohidk91 * 1 inch lowering springs
@@Broski_Nation what camber kit did u get
With the duckbill I know our stock little spoiler things have holes do you have any issues with water seeping in or how did you seal it?
Nope. Not at all Ian. So before I attached the duckbill spoiler, I took some electrical tape, no more than maybe an inch in length, and covered the holes. So far its held up well. Been over a year 🙂
@@Broski_Nation okay awesome thanks for responding to me I’m just about to order one and wanted to make sure!
@@ianlee6419 Anytime my dude
Where did you buy your front splitter? And did it fit right over the factory one?
Good ole eBay my dude . Its a three peice set up. And I just bolted it on to my bumper. On mine, I didn’t have a factory splitter on mine. I think the 10th gen Civic hatch’s do. But on the 10th gen Civic Sport Sedan, no factory front splitter.
Yours didn’t have the small little black splitter? And thx I appreciate the advice I have a 2019 civic sedan sport and trying to find aftermarket parts for it has been tough you have made it a whole lot easier!
Hey no problem! Glad this page could help you. I’ll find the link and post it! And as for that little black piece on the bumper, I guess you could call it a splitter, but it looked so small and was well integrated with the bumper, I considered it more of a bumper trim piece 🤣. Like I swear, Honda Showed that Hatch more love than our Sedans. They treated our sedans like an after thought 🤣!
www.ebay.com/itm/303069829017?epid=10044572914&hash=item46905e9799:g:dpgAAOSwjrlh8faE&fits=Year%3A2020%7CMake%3AHonda%7CModel%3ACivic%7CTrim%3ASport%20Sedan%204-Door%7CEngine%3A2.0L%201996CC%20122Cu.%20In.%20l4%20GAS%20DOHC%20Naturally%20Aspirated%7CSubmodel%3ASport%7CEngine%20-%20Liter_Display%3A2.0L&_nkw=10th+gen+civic+front+spliters
@@Broski_Nation I agree we didn’t get the love we deserve!😂😂 and thx for going to post the link def might have to get!
Hey bro, where would find those rear split diffusers?
Ebay broski. Heres the link on the ones similar to mine
www.ebay.com/itm/192364653644?hash=item2cc9d3ac4c:g:Y-QAAOSw8axaC2NZ
thanks bro, been looking and looking everywhere lol
@@DustyTheTortie Anytime man
Can you upload some vids on how you installed some of these mods?
Sure, any one in particular ?
@@Broski_Nation yeah, The yellow fog lights, rear spoiler, and the front lip.
@@lefthanded5473 So the yellow fogs were just a yellow overlay from Lamin-x.com. Theres a vid of how a spoiler like mine was put on, Ill send you YT link. And the front lip, I can do a quick vid explaining what I did.
@@lefthanded5473
Spoiler Vid installation
ua-cam.com/video/TbPzA1-BnTI/v-deo.html
This covers the basics. But when you remove the old spoiler, cover the holes with electrical tape, to prevent from water getting inside. Also, if your Duck Bill spoke comes with drill holes at the bottom of it, use them. 3M Tape alone, wont keep the spoiler on if you driving on the freeway and getting that down force on that wing. The wing will start to flex back and rip off over a period time. Better to be safe than sorry. Get two self tapping screws , paired with one washer for each. And drill them into the wing , from underneath the trunk lid.
@@Broski_Nation One more question, as far as the yellow fog light overlays. I read reviews that they have issues with burning or melting into the fog light assembly, have you had this issue? Also are they the signature JDM greenish yellow color like the Lasfit switchback fogs or do they just enhance the yellow of the factory halogens bulbs? Thanks for the information and vids btw I appreciate it. Lovin your car.
who did/where did you get the roof done?
I had it done at a local window tint place that also did body wraps and decal work here in the midwest.
Where’d you get your Honda badge?
Found it on Ebay my dude 😎
the fake hood vent are uneven
Haha, you peeped that huh? Damn! So, originally, I had those vents a little higher up on the hood, but when I had my Xpel paint protector transparent wrap put on the hood, I put those vents back on. However, when i noticed they were uneven, couldn’t take them off without ruining the wrap. So said screw it. Left it on. Proly lost some wheel hp with that unevenness of the vents 😂🤣
where u get yo front splitter, i been looking for one that would fit that type of civic?!!
I got it from ebay my dude 😎.
www.ebay.com/itm/303069829017?epid=10044572914&hash=item46905e9799:g:dpgAAOSwjrlh8faE&fits=Year%3A2020%7CMake%3AHonda%7CModel%3ACivic%7CTrim%3ASport%20Sedan%204-Door%7CEngine%3A2.0L%201996CC%20122Cu.%20In.%20l4%20GAS%20DOHC%20Naturally%20Aspirated%7CSubmodel%3ASport%7CEngine%20-%20Liter_Display%3A2.0L&_nkw=10th+gen+civic+front+spliters
@@Broski_Nation appreciate it!!
@@AlexLM03 No problem!
I have those same fakr side vents on my hatch im debating taking them off cs their fake but idk i might leave it on until i get a type r body kit but i might just get a 370z and leave the fk7 all together cs it doesn’t seem to he respected in the jdm community
All due respect my dude, why change what you have on your car to please the jdm community? Did you build the car for them or for you?
@@Broski_Nation im considering changing because idk how much a tune will help the lx honda civic hatch don’t get me wrong i love the fk7/8 but i also love the 370z.
@@Broski_Nation love the build btw
@@stadic5311 I believe the Lx Hatch still has the 1.5t in right? So a tune will unlock more power out of that car than a tune did for my 2.o n/a sedan. But then you godda ask yourself, can your internals and trans handle it? Because If not would be a waste, which is why I see why you wanna go with the Z car.
@@stadic5311 Thanks my dude! I really appreciate that!
what's brand spoiler its that?
Im not sure off the top of my head, as I purchased and installed it a few years back. But I purchased it from Ebay. Search under “ 10th gen Civic Sedan ducktail spoiler “.
How did u install the duckbill spoiler I have one 2
I had to remove the trunk lip spoiler. So I had to open the trunk, remove the trunk carpet like covering. Which it held by 8 or 9 plastic honda push in fastener clips.Pop them up using a flat head screwdriver.Then when you look inside, you will see theres one screw holding it in, and the the rest are honda style clips, a bitch to pop out unless you have the proper clip tool, which i didn’t 😅. On top of that, the lip spoiler had some type of 3m tape holding it down on top of the trunk.
For me, I had to remove the bolt, and break the clips( Because I did have a specialty tool to properly remove the clips ). I then had to pry up the spoiler with a flat head tool. Be careful not to scratch the paint. Though , during the process, I did break the spoiler, but didn’t care , as I was not using anymore. Then remove the left over glue adhesive . I used a rubber eraser attachment that connects to a 18v 3/8” adjustable electric drill. It made for removing glue from car surfaces.
Then on your new spoiler , you’ll notice two screw holes that line up with the holes where the old spoiler was at. But before you screw it in, take notice when you place the spoiler on the trunk where it makes contact on the trunk. Then apply the 3m tape to the spoiler where it makes contact to the trunk. Then apply pressure throughout the spoiler to the trunk so it binds to the trunk surface .
Next, open up the trunk, and locate the holes that line up with the spoiler holes . I used a two 8 or 9mm self tapping screws, no more than 1.5 inches long. Once screwed in, you’re done 😎
How much hp ?
After the tune, 178hp and 171 lb ft of Torque. Before tune, 158hp and 139 lbs of torque.
Hey how’s it going man? I love your car and I have a honda civic myself, just wanted to ask you, where’d you get the fake vents on the hood and on the side? I’m interested in buying them. I think they look sick!
Hey, its going well man. Hope you’re doing well yourself. And as for the fender and hood vents, I ordered them off eBay. Ill post them in this video’s description section 😎🤘
@@Broski_Nation Thank you so much! Also, is the spoiler just for the sport model or any 10th gen civic?
@@fcbalr9033 No problem at all. So as for the spoiler, the original lip rear spoiler was painted in gloss black. I believe the lip spoiler also came on the upper Civic Sedan trims too in body color ( Ex, Touring, and Touring Sport). Now for the aftermarket ducktail spoiler I have on now, i had to remove the previous lip spoiler, in order to install my Ducktail spoiler.
@@Broski_Nation hey do you also happen to know where you got the nose cover for the hood?
@@fcbalr9033 Yep, its the Weather Tech hood protector
www.weathertech.com/honda/2020/civic/hood-protector/
Black and red wheel caps? Where did u get!!??
Hey Amelia, I ordered them off Ebay. Came with the front ,rear, and steering wheel honda black and red “ H” emblems. But i changed out my wheels last year. Rockn some bronze shoes now 😎
@@Broski_Nation love what you have done! I have the front back and steering wheel
badges exact same as yours. Mine didn’t come with the wheel caps tho😩but I’ll find them!!!
@@amillie_412 Thank you Amelia. Spent a while getting this car to look like I want it. I have newer vids on here on the car’s progress. Please check it out! 🙂
@@Broski_Nation most definitely will!!!
Thank you, thank you
hey man! where did you buy your duckbill spoiler?
Ebay. Good ole friend Ebay 🙂
where did u get the window visors ?
Amazon have them
I got these off Ebay, and they are the "In channel" window visors
All that extra money spent could've gone to an Si lmaooo wider gap for power too man. Sucks to see oh well
You know, whats funny , is a buddy of mine were having this same conversation recently 🤣. But, while I agree partly that I could have gotten an Si , there was a reason why I chose the Sport over the Si. It was based on my own personal needs. The 10th gen Civic was the first gen to get the 1.5T. It was also in this gen with that motor, you were dealing oil dilution. I wanted nothing to do with that, but more importantly, I already came from a previous vehicle that had a turbo in it. Yes it was fun to drive, but it was becoming a money pit. Were I’m at in my life right now, I wanted something more simple. Hence why i chose the Civic Sedan Sport w/ 2.0 n/a engine. No turbos I’d have to worry about going bad later on to have to pay for to replace. Granted, not a fan of cvt , but, Im happy to have what I have. Its paid for, and really, thats all I care about . To each their own.
@@Broski_Nation honestly great reply man gave me some insight. Big ups 🤙
Why u worried about what another man doin with his money? Let the dude enjoy his car. its HIS money.
@@Bleed_Blue625 cuz its a comment section where im allowed to post my opinion. I can literally say whatever the fuck I want that’s the whole point of this part of the internet. Dont like my opinion? Sucks bro 🤙
@@solmenuoner Damn bro why the cursing & negative energy? Wasnt needed. Just backing up the content creator, he enjoys his car & just probably wanted to share it w/ people online without any backlash. Just keep walking in love bro, no need for all the hate. Hope u have blessed day
Where u buy rain guards?
I purchased them off ebay 😎
www.ebay.com/itm/182171403690?fits=Submodel%3ASport%7CYear%3A2020%7CEngine+-+Liter_Display%3A2.0L%7CModel%3ACivic%7CMake%3AHonda&hash=item2a6a4305aa:g:UtgAAOSwj9lZsmyB
How do you install that hood protector? Just 3M double sided tape?
Its really easy . When you order the Weathertech hood protector, it already has the 3m tape on it. It also comes with this wipe pad , an adhesion promoter, you apply to the area where you place the hood protector at. And you’re good to go!
@@Broski_Nation Thanks bro. Looks good, definitely will be buying one for my Coupe!
And rear side skirts??
Rear side skirts got from Ebay
www.ebay.com/itm/192364653644?hash=item2cc9d3ac4c:g:Y-QAAOSw8axaC2NZ
The inside is even worse so many tacky unnecessarily “mods” less is more
Hey, it is what it is.
@@Broski_Nation to each his own that’s just my opinion the car scene isn’t what it used to be anymore especially not here in cali
@@spankylocc4202 Hey, i respect you sharing your views. No hate on my end, take care of yourself out there.
yo whats up with the fake vents tho
Honestly, because the car is paid for, its mine, and I like the way they look 😎
fake vents are so ugly and corny
And they are on backwards, haha.
Those fake vents look like shit. Nice try though
Crap! I’ve been found out 🤣
The hood vents do look like shit but the side fender flares are ok not bad
Hey, its all good man . To each their own. But, with those hoods vents , I’m getting an additional 20 plus horsepower boost, those are facts 🤣😎
what you drive again?
@@DustyTheTortie 10th gen Honda Civic Sport. Its slow, a little ricey, but its mine 🤣
N/A cars are a waste of time and money!
I just laughed at what you wrote. Because, you’re right 🤣. Well , if you’re trying to make a N/A 4 banger fast by just adding bolt ons, aint gonna happen. Pointless.Ive been , there , Ive done that. * Have a video coming soon regarding this
But N/A serve an alternative option for those who want better reliability and aren’t looking for performance. Boring to drive, Sure, but if it serves that person need, good for them.
I had a car with a turbo,fun as hell to drive, but it was becoming a money pit ( 2014 Chevy Malibu w/ a 2 liter Turbo (LTG 2.O liter Turbo) and i sold it and got me this Civic. Not fast, but i got it for the reliability aspect. It’s s paid off, and I enjoy it. But man, that feeling of when that turbo kicks in and pushes you back in your seat…it’s amazing 😌
plsss bro where did you get the seat covers?
Oriley Auto Parts or Auto Zone. Check instore or online. I think I paid $20 dollars per seat cover a few years ago. Might be a little higher now.