Damn this is GENIUS! Ordered samples from 3 different companies, definitely going to be doing this for the next couple months BEFORE ever trying sell my services. Thank you Brandoh!
Thank you for everything you do iv started my own t-shirt bizz cuz I started off you and I learn alot from you and I. Building apon the things you teach thank you its a learning process.....keep dropping that fire im here to learn thank you again .
all facts, dealt with this issue a few weeks ago, never experienced it before but after some good old fashion trial and error i was able to get the settings right and actually learned more about my equipment. as always, thanks for sharing this and droppin gems...
Makes perfect sence and completely overlooked. I've said it before, I'll say it again. Dude you are the shit, period. Your info is so greatly appreciated. Thanks
THNX BRO. Appreciate this much. taking my time and listening to you a lot before I start. Have my equipment set but doing theory and practice now. Bless
Excuse me my boii... when getting the fictitious what do I put it under??I can't do LLC I'm berly starting you other options I want to see what can you recommend
THANK YOU VERY MUCH FOR THE INFO. my question is, everytime that i test the tranfers with diferent seconds and degrees , the heat is not going to affects the others transfers ?
Thank you for the information. How do you press the six different transfers without the heat affecting the other ones previously press? Do you put something over the transfers you previously pressed? So that you don't repress them with a higher temp or more time each time you lay down a new transfer.
nah. just start at the top left. press the first one. slide the shirt up and do the next one, slide the shirt up and do the next one, slide the shirt up and do the next one. repeat the process for the other side. stsrt at top right and continue down.
@@BigBrandohfirst I would like to thank you again. I do have one more should I press the transfers on the shirt that I will be using ? Or as long as it is the same material I will be good to go to start my test. I have also used some of your plugs.
Question tho. why do i have to press for over 50 sec to get my htv on set good? I used up all my samples doing that 10 seconds and 12 seconds etc rule they have for it. I have to press on 50 sec to get it set good.. i use the signature pro. And I got that from ur advice too and the way ur presses come out.
i have no idea why you have to press for 50 secs. could be alot of reasons. moisture in shirt, pre press to eliminate moisture, check your temp with a laser thermometer for accurate reading, increase your pressure, decrease your pressure, adjust your temp up or down. its trial and error. depending on the brand of htv you use it could be any of those things. all presses are different and all htv brands are different. this is what the testing process is all about. finding out what works best for you and your set up
Ay bro, this may be a dumb question, but when you’re pressing each test square are you making sure only that square is under the press? If not, doesn’t the number 2,3,4, etc pressings effect the first ones you pressed? Appreciate you. Your videos got me going on on my first press.
not 100% sure you understand the logic behind this test. or its jot worded in the video to make sense but all you gotta do is press a square, slide the shirt down, adjust press, press another square, slide the shirt down, adjust press and repeat and repeat and repeat.
Quick question: Do I need a business license to buy heat transfers with my custom design on it? I just want to make shirts for myself and personal use.
Damn this is GENIUS! Ordered samples from 3 different companies, definitely going to be doing this for the next couple months BEFORE ever trying sell my services.
Thank you Brandoh!
Thank you for everything you do iv started my own t-shirt bizz cuz I started off you and I learn alot from you and I. Building apon the things you teach thank you its a learning process.....keep dropping that fire im here to learn thank you again .
Big Dogg! Thanks for the JEW-EELS you dropped I appreciate you Doc #SALUTE
I agree.. have to test everything.. I also check the shirt for shrinking and discoloration while I test the transfer's.. good talk
all facts, dealt with this issue a few weeks ago, never experienced it before but after some good old fashion trial and error i was able to get the settings right and actually learned more about my equipment. as always, thanks for sharing this and droppin gems...
JERSEY-N-THINGS CLOTHING LLC Thanks for the video Brando great illustration 👍
Makes perfect sence and completely overlooked. I've said it before, I'll say it again. Dude you are the shit, period. Your info is so greatly appreciated. Thanks
Big Brandoh!!! You're golden bro. Your videos are very informative. God bless
Makes perfect sense. It works and helps. Not all transfers set the same way
Makes plenty sense to do it this way. Thanks for the knowledge you provide to us all.
Bought your list and order samples. Thanks for the info
THNX BRO. Appreciate this much. taking my time and listening to you a lot before I start. Have my equipment set but doing theory and practice now. Bless
Brandoh giving out gems. Always on point with no nonsense content. Thanks homie for the knowledge.
Thanks for sharing....great video 😊
Big brandoh salute 💯
Damn bro I learned so much.. .. imma use that method..
I do the same shit!
Especially with any variable changes.
Can you cover quickly placing the left chest logo?
i got vids on here, on instagram and tiktok showing left chest prints. check'em out.
Excuse me my boii... when getting the fictitious what do I put it under??I can't do LLC I'm berly starting you other options I want to see what can you recommend
THANK YOU VERY MUCH FOR THE INFO.
my question is, everytime that i test the tranfers with diferent seconds and degrees , the heat is not going to affects the others transfers ?
nope. press a piece, adjust the press and slide the shirt down, press a piece, make adjustments and slide the shirt down... repeat the process
@@BigBrandoh THANK YOU BRANDOH FOR YOUR HELP
GREAT ADVICE.
Good Info, well said! I personally go by if I wont use it for my business I dont sell it!!
Thank you for the information. How do you press the six different transfers without the heat affecting the other ones previously press? Do you put something over the transfers you previously pressed? So that you don't repress them with a higher temp or more time each time you lay down a new transfer.
nah. just start at the top left. press the first one. slide the shirt up and do the next one, slide the shirt up and do the next one, slide the shirt up and do the next one. repeat the process for the other side. stsrt at top right and continue down.
@@BigBrandohfirst I would like to thank you again. I do have one more should I press the transfers on the shirt that I will be using ? Or as long as it is the same material I will be good to go to start my test. I have also used some of your plugs.
Question tho. why do i have to press for over 50 sec to get my htv on set good? I used up all my samples doing that 10 seconds and 12 seconds etc rule they have for it. I have to press on 50 sec to get it set good.. i use the signature pro. And I got that from ur advice too and the way ur presses come out.
ps. I use 320 with 50(firm) pressure and 50 seconds.
i have no idea why you have to press for 50 secs. could be alot of reasons. moisture in shirt, pre press to eliminate moisture, check your temp with a laser thermometer for accurate reading, increase your pressure, decrease your pressure, adjust your temp up or down. its trial and error. depending on the brand of htv you use it could be any of those things. all presses are different and all htv brands are different. this is what the testing process is all about. finding out what works best for you and your set up
Question, won't you effect the other prints by doing the other pieces? Say 1st part vs the 6th part?
My thoughts too...?
👀👂🏾
nope. press a piece, slide the shirt down, press another piece, slide it down and press another piece.
Got it! Thank you for all the info you give!
Waiting on my press first time buying one this is very helpful 🙏
love it bro thank you again!
i wasted shit loads of transfer and shirts thanks for helpping me save me big money! Brandoh
Ay bro, this may be a dumb question, but when you’re pressing each test square are you making sure only that square is under the press? If not, doesn’t the number 2,3,4, etc pressings effect the first ones you pressed? Appreciate you. Your videos got me going on on my first press.
not 100% sure you understand the logic behind this test. or its jot worded in the video to make sense but all you gotta do is press a square, slide the shirt down, adjust press, press another square, slide the shirt down, adjust press and repeat and repeat and repeat.
Super Dope, my dude, Salute!
Quick question:
Do I need a business license to buy heat transfers with my custom design on it? I just want to make shirts for myself and personal use.
no license needed. just place your order and get your press on
@@BigBrandoh Thanks Brother for the fast reply! Love your content!
Big dog 💪🏽
Lmao wt “Karen Instructions” 🤣⚰️
Anyone reading this use a craft pro 15x15 ?
💎
Yow I was just thinking about this topic yesterday what's wrong with you?!
Jersey-N-Things Clothing LLC whats happening Brando