hi,please can you help,i have a new tipman 13ci, and my reg should output 850, first it was 1000 then next fill it was 900 then next 850, then now 400 psi! every fill,what is wrong it wont out put more than 400 psi the same on 4 fills ,
hi i have a problem whit this same air tank.my 1.8 k burst disc always burst when im filling over 2k psi.i have seen the video and put the tank back togheter just so shown in this video.im filling from a pcp hand pumpe.does that have anything to do whit it?
The small piston o-ring must be leaking and let the tank's full pressure override the o-ring and then the regulator does not work as should (close the regulator valve piston when the regulator pressure has been achieved).
+kustomTooth TIppmann regulators are not adjustable. You could put a ninja regulator on your tank, as all Ninja's are adjustable. www.tippmannparts.com/Ninja-Paintball-Regulator-3000psi-Input-p/3738.htm
Superb video. Was an interesting to watch even do not own a Tippmann tank n reg..🙂👍🏻👍🏻
Que wueba escuchar a este compa, alguien puede resumir el video
I bent the bonnet tip on my tippmann tank. I have a 48/3000. I bought a valken replacement bonnet. Fits perfectly. Is there any problems doing so?
What bottle thread do tippmann use?
Nice video! Do you know if tippman reg and ninja reg are identical? Is the piston and washer pack can be share in both? Thanks
Need to replace the top piston o ring. Any specific one i should use?
hi,please can you help,i have a new tipman 13ci, and my reg should output 850, first it was 1000 then next fill it was 900 then next 850, then now 400 psi! every fill,what is wrong it wont out put more than 400 psi the same on 4 fills ,
Thanks for the video, do you know the pitch of the male threads that go into the bonnet?
I don't know that. These are generally custom to each brand.
What size Belleville washers?
Can I just cap the burst disk ?
Is it very very necessary to use a pressure regulator for tippmann tmc marker or i can run it without regulater?
You will blow the shit out of your gun if you use 3,000psi in your gun
How much does this tank weigh?
Ryan Williams This tank + reg weighs 2.80 pounds.
hi i have a problem whit this same air tank.my 1.8 k burst disc always burst when im filling over 2k psi.i have seen the video and put the tank back togheter just so shown in this video.im filling from a pcp hand pumpe.does that have anything to do whit it?
In our experiences this can be fixed by replacing the piston orings inside of the bonnet.
The small piston o-ring must be leaking and let the tank's full pressure override the o-ring and then the regulator does not work as should (close the regulator valve piston when the regulator pressure has been achieved).
How do you adjust the output pressure? I need 550 psi
+kustomTooth TIppmann regulators are not adjustable. You could put a ninja regulator on your tank, as all Ninja's are adjustable. www.tippmannparts.com/Ninja-Paintball-Regulator-3000psi-Input-p/3738.htm
kustomTooth how much output pressure does it normally use?
I just bought one. Is it good?
Chumpa007 It is a good regulator! It is Tippmann so you can expect it to be a very quality product as well as durable.