How to fill your Paintball Tank (Compressed Air) l Overview & Troubleshooting your HPA Tank!
Вставка
- Опубліковано 20 гру 2021
- Today, Joel goes over all the basic information needed to fill a paintball compressed air tank. He also touches on common issues that can develop from this process!
CLICK BELOW TO SHOP HPA TANKS:
punisherspb.com/collections/p... - Спорт
Great video. Need to make all the kids watch this before the next birthday party. Also a good refresher for any level of player
Bro who breathing heavy af🤣🤣
😂
That's Keegan bro!!! He straight wildin'!!!!!
Was waiting for the zombie to attack!!
How fat is he?
Thank you for the clarity and easy to understand steps.
Darth Vader be filming dis shit
Is DarthVader filming this?
I was hoping to learn how to set up my own refill system using my compressor.
You still wanna know how I have my own really good budget compressor setup
@@haydenshores9943I wanna know
A compressor 3 storage tanks and the actual fill station......
Where can I get this hose and adapter or something similar to it?
So what piece do I need to get to fill up at my local mechanic/tire shop
This guy breathing so hard 😂
Darth Vader distracted me!
You could put a water bucket near to immerse the tank in as it's being filled to hold the temperature down
Don't know if you still answer comments after that amount of time, but I'm facing a problem when filling my bottle.
Got a Ninja 4500 Ultralite LP preset on my bottle ; when filling it with compressor I don't have any issues but when it's time to use my scuba tank with a Balystik Fill Station on it.. there starts the problem. I filled it slowly, closed the scuba tank, and opened the bleed valve of the fill station and all the air inside my bottle has started to go away. I had to empty the bottle using that bleed valve to disconnect it. What could be the reason to that ?
If the problem occured every filling I could say my fill nipple is dead.. but it's only with my scuba tank.
Thanks !
another thing, always check your hydro date
How you got Darth Vader manning the camara
Can I refill empty 10CI steel tank 200 BAR from another tank kevlar 300BAR in my backpack?
Can you adjust the output pressure of these HPA tanks?
How it works is the HPA tank is charged to 3000-4500 psi, the tank has an outlet pressure of around 800 psi from a built in regulator that is non adjustable.
Another regulator screws into the top of the tank and you adjust the pressure down to whatever you need if you are playing something like paintball or airsoft.
This pressure is usually from 80 to 200 psi.
Some people use a tank type called SLP (Super Low Pressure), which has an internal tank pressure that is much lower, these can be cheaper but give you fewer shots per charge for a given tank size.
These special SLP tanks also need another regulator, generally you can use an HP regulator with a SLP tank but not the other way around.
PCP guns (Air rifles) use super high pressure so they tend to use unregulated tanks charged to whatever pressure the rifle calls for.
What if I want to top off my tank and it already has 1500psi in it?
Do you need to separate the gun regulator from the tank regulator before filling? Is this normal or can you simply fill with the gun regulator attached?
You can fill it with it still attached to the gun. If any issues don’t be afraid to ask a ref to help you at the field you’re playing at.
@@ryanfitz2214 Ty, I have always had the gun side reg attached but had read someone saying you should remove it first. I did not see the point but wanted clarity . TY.
rock that shit broooooooooooooooooo
What’s the content of that yellow cylinder beside the fill station?
Compressed Air!
@@PunishersPaintball does that gets finished and needs refills?
Also what’s the blue thing then or the yellow cylinder comes equipped with the blue thing already ?
Can I buy a regular compressor from wal mart and attachments to fill up my compressed air tank or is it some type of air? Lookin for somethin portable to fill my tank out in the woodsball.
You need a HPA compressor, a normal air compressor runs up to about 300 or so psi max and they tend to only output about 80 something psi. Better off to just buy a specific compressor
On a 48/4500 tank what psi should I fill it up to?
4-4.3k
4500
why does my tank reach equilibrium only at 1000 psi?? i have a carbon fiber 4500 psi hk army hpa tank
I would assume the equilibrium means that the air supplied to your tank was only 1000
Name of station ?
Ok so if I’m not wrong if I have a tank that is 3,000 psi I should feel it till the line goes to 3
Btw i new to all of these so that’s why I don’t get this
yes
@@Michael12689 People generally do not go right to the line because the burst discs are going to pop at a little above that.
The burst discs are there to make sure they pop before your tank pops from too high of a pressure.
2900 for 3k, 4300-4400 for 4.5k
If your gauge is a little off this could save you a headache too.
@@spider0804 ok thanks
@@spider0804 3k psi or 4.5k psi believe it or not ,are the safest rated psi to fill tank, but they can actually fill up a lot more than that. for a 3k psi tank it would take around 5k psi to pop the burst disk. So a little over the 3k line wouldnt really hurt. And no need to fill less than 3k or 4.5k psi really.
You said dont use Co2 with air tank ... You should clarify anything you say " do not do ".
. WHY ?
"Cognisant"
Lol i know ppl that are terrified to fill their own tank. It’s sadly funny.
am i crazy or is there someone breathing heavy...
bro got a hippo to film bro breathing right into the microphone god daym
Why can't you just put a regulator on the co2 tank and use it for hpa up to 3000? Do you know the standard pressure for a co2 tank?
I just setup a co2 fill station for mine. Apparently standard pressure for co2 tank is 900psi