How to Install an Automatic Washing Machine Shutoff Valve | This Old House
Вставка
- Опубліковано 28 сер 2024
- Adding overflow protection to the laundry room with This Old House plumbing and heating expert Richard Trethewey. (See below for a shopping list and tools.)
SUBSCRIBE to This Old House: bit.ly/Subscrib...
Shopping List For Installing an Automatic Washing Machine Shutoff Valve:
- automatic shut-off valve
- 1/2-inch PVC pipe
- 90-degree elbows, used to connect automatic shutoff valve to brass adapter
- PVC primer and cement
- hollow-wall anchors and screws
Tools For Installing an Automatic Washing Machine Shutoff Valve:
- pliers
- tubing cutter
- drill/driver
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldH...
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldH...
How to Install an Automatic Washing Machine Shutoff Valve | This Old House
/ thisoldhouse
The only thing that will last in this video is that old General Electric was Washing machine.
Amen
My parents had that same model I believe
Would love to know the original air date for these older videos!
Same here
What I liked best was that old school washer they don't make them like that anymore
This is great.. until the automatic shutoff device itself begins to leak.
Luckily, the manufacturer also sells an automatic shutoff device automatic shutoff device
Hahaha...
Unlikely as the unit itself is as is seen in this video is completely sealed
@@stephensnell1379 Has man made anything that doesn't eventually fail? Electronic devices on your car are all completely sealed units too--- they don't last forever either.
CPVC really should have the ends chamfered before cementing. Also, don't use cleaner. It is a common misconception that cleaner is the same as primer. It isn't. And lastly, good God man wipe your joints...
Sloppy with the yellow goo.
Just get a single lever push/pull ball valve... much simpler and cleaner. Once you do it a few times you'll never forget to use it etiher.
GE Filter-Flo washer.
The GE Filter Flo washing machines are the best. Built like tanks 💯.
Says 9 years ago, so don’t those newer full water main valves that have motorized shutoff protect all the water locations and not just this one and have Wi-Fi and Bluetooth with LoRa feature in 2023!??? Also detectors to place everywhere just about? With alarms and phone alerts!!!???
I know, kind of late but...if you leave those shut off valves open all the time, chances are when you want to actually close them, they won't seal properly due to mineral deposits that will settle on the internal seals. Every time I see some new gadget to make life easier, I always think another point of something to fail.
Abunai One I'm not sure if you're talking about the electronic valve he installed. If so, they shut every time the washer stops asking for power. So they get cycled every wash load.
The regular end stop valves, you're correct though, they need to be exercised every so often so they don't leak when you need them. I actually grab ahold of the main ball valve in my basement when I'm down there and give it a quick off and on just to make sure it stays free moving.
According to your logic the real problem is going to be your main water shut off valve which stays on all the time...
@@rickybobby7276 with the use of quarter turn shut off valves throughout the house, closing valves have become much easier and efficient.
How ironic, I just found an outside water spigot that started dripping ever so slowly in a very inconvenient location. I rarely use this hose. I bought a new quarter turn shut off to replace it but at the same time found these plastic caps that screw onto the end of the garden hose. It's been about a week and that cap stopped the drip, for now.
What about the water hammer arrestor?
so no need for a drain pan and pipe for this solution... great!
Hot Cookies, what a great solution.
for what?!
2:55 I'd use a washer between the device and the wall.
What is it for?!
He told her at the end of the video what it does. Don't people listen?!! The hoses are not under pressure when the washing machine is shut off, the sensor on the floor shuts the water off to the washer, if the washing machine overflows and runs water on the floor.
I would like to know the manufacturer's name for the automatic washing machine shutoff valve that Richard installed.
Looks like a Watts A2C-M1
very sloppy looking glue joints
I know, maybe he should have covered the rest of the entire surface of the pipes... at least it would look uniformly yellow
I'd use more glue to be sure. But good job otherwise
Hi, when I hooked my washer to the sink using only the cold line water and I lift the hot water line un hooked then I notice the hot line hose of the washer keep dripping, do u have any idea why its dripping?
Or I have to hooke both line?
Awesome video! Who makes these devices and what is its price range? Thank you.
A number of manufacturers. $170 to $300 for the most part.
Thank you. I have located several on Amazon. It is very important to read the reviews.
Peter Nestor I agree... many claims by manufacturers don't live up to expectations... I am always leery of putting more electronics in a home. More stuff to break and it seems like the week after you install a "gadget" it is outdated.
No Wi-Fi?
pvc piping ?.Holly crap, u asking for flooding your place.
Richard is so sloppy with the glue. My seven year old can do better
Is that Rush Limbaugh doing plumbing work
why do the american washing machines need hot water?
So we can wash our clothes in hot or warm water?
Do euro washers heat their own water?
biohazard 918 yes we only suply cold water and its heat its own water itself. Hot water much more expensive than self heated cold water
The standard 120 volt 15 amp outlets here would take a long time to heat the water. This is especially true with the top load machines a lot of people have here since they use much more water. Plus l heat my water with natural gas which is a much cheaper heat source then the electricity the washer would use.
biohazard 918 thats why EU has 240v and 380v outlets in Basic town flat.
We have options for more power. Most laundry setups here have a 240 volt 30 amp socket for an electric clothes dryer. There isn't really any reason to not plumb in hot water. Its going to cost the same to heat electrically ether way or less if you have a fuel burning heater.
Why do we love to complicate our lives , I dont understand.
If one of your hoses burst or your washing machine malfunctioned and overflowed, then you MIGHT understand!! You should pick another moniker instead of Wisdom Wisdom.
@@KStewart-th4sk a mechanical timer valve is the current solution. this is some old trash from the 2000s it is too complicated.
Spoken like someone who's never had a washer leak and flood in their home. And someone who doesn't bother with insurance and those pesky premiums;)
@@RalphRacc00N That'll work as long as the leak doesn't happen while the washer is running. But it won't satisfy insurance in condos or apartments.