Oh, that is beautiful! I'm still using my Mom's Kenwood Chef that she purchased in the late 1960s. It was purchased through Sunrise Industries in Toronto, Canada (I live in Nova Scotia). I never thought of it as being vintage, but I guess that's exactly what it is! Works like a charm!
My Kenwood Chef 701A is just the most wonderful machine and it has been in constant use since 1971. However last week it suddenly made some strange noises and the outside casing was very hot to touch. I turned it off and did wonder if I had just used it for the last time. My husband and I watched your video and decided we would give it a try ...Yes, we did it, thanks to you. Our machine is up and running again. The grease in the gearbox which obviously had never been changed, there was some empty spots but also solid in places. Cleaned and re greased and runs like new...Thank you so much for you instructional video.
Great work. It truly looks like new. I have a KM201 that needs plastic case repairs and missing cover plates and that is proving to be a challenge for me. By the way, you wouldn't last 10 minutes at my office if that crop duster bothers you. I have a media helicopter that lands 10 metres outside my office window. Coming and going. All day.
Hi i to have a Kenwood KM200 and i am in the process of replacing the the electrical components. Your kenwood A700A is really clean and like new well done. The only thing i would use is a suger soap to clean of the grease parts its good on plastic and bright it up. Hi from IRELAND 🇮🇪
Excellent video - good clear audio and attention to detail as you disassembled and reassembled after refurb. Wish you had run it though would like to hear how loud it is. If you ever have to get into the gearbox to replace the grease or change the brushes out please do another video. That was very sweet of you to redo it for your wife.
Emile 3 years ago I watched this and it fascinated me. However mine is a hobby turned into a business. My mentor is Mike Stratton from the UK and since then I started to refurbish and overhaul Kenwood Chefs. However I focus on the 1950's A700 models right up to the KM range. And we do restore or replace the speed control circuit boards. But the Britsh machines, over engineered, will last forever. Sadly not the Chinese models. I do not touch them.
Shame you are not nearby. My kenwood major 707A bought in 1974 has started doing the fast speed on all settings so I am looking for someone who could repair it but it is not easy! I am not getting rid of it under any circumstances! I am not impressed with the new ones, they look so flimsy!
Hello Sir, I therefore allowed myself to contact you because I have a Kenwood chef A701A and it has just broken down. When I press the blue button on the speed variator it starts normally at all speeds (constant increase in speed) and the more I turn it the faster it goes. Only when I put the sheet or the hook with a preparation inside it leaves timidly and stops immediately turning although the engine is still very audible. I think he no longer has the strength to train the accessories. I started to disassemble it because I was thinking of a problem with the strap on the top but it looks in good condition. Before dismantling everything, could you help me by giving me some tips on the breakdown. Hope you can help me thank you in advance. cordially
Hi there, great video you have done such a beautiful job! I have just bought one at auction, my main problem is the smell! It was not well cared for and is incredibly greasy and smelly, I want to strip it and clean it to try and get rid of the stench, can I clean all internal parts with thinners or metholated spirits? Also the attachments are tarnished / rusted,do you know what would get this off? Also the piece of felt in mine is equally disgusting, can this be cleaned or shall I get a new one? Any advice so appreciated!
Methylated spirits: yes - it is akin to IPA or denatured alcohol and commonly used for cleaning electronics and should easily wipe away grease. Thinners: No - not unless you know exactly what is in them and know they wont damage existing paint work and/or electronics.
I have one like that also. It gets very hot when running for 15 mins. I was thinking that it might need lube in the gear. Do you know about that? or why it gets very hot (you cannot touch it)
Hi there, I have a similar mixer and the speed dial was not working unless it was being pushed in, which it wasnt doing previously. I took the speed dial off and am now having issues putting it back on. Do you have any suggestions for this. Thanks
Hi what kind of paint is the one you use? i live in argentina so teh brand you use is not available, but if i knew what kind of paint it is, maybe i can find it.
The k-shaped stirrer (English is not my first language, sorry) won't lock in properly. It looks to have all its bits and pieces comparing to the other parts. The sort cross bar that engages with the holder is quite close to the big hex nut though. Any ideas? Much appreciated. Thanks in advance! Cheers
Hi. I have taken apart my Kenwood Major. Is there a trick to putting the main hinge pin back in? Having trouble with the spring pressure... Also: where can I get the clip/washer that holds the spring on the release button/pin in place? It broke on disassembly... It's the one that goes into the groove on the pin. Thanks.
Hi you've inspired me too refurbished my old chef A701. what paint stripper did you use ? the product I tried doesn't work on the old paint at all Cheers
Hi, my kenwood KMC570 has a burst of speed at speed 3 and i always have to turn the speed dial very slowly to avoid or get out of the speed burst. is this normal?
These fabulous mixers got an achilles heel when they had nylon input and planetery cogs. Working in a greasy enviroment these gears got brittle and split working under heavy loads.. Even the alloy ones could do the same when regularly kneading bread dough. I dont believe they were ever made with hardened steel. An ideal choice for the torques they had to deal with. Sadly because of this that clumsy and awkward Kitchen Aid thing so much featured by TV chefs has won over. Now Kenwood have sold out to the form over function brigade and style there mixers the same way. Ive used both in a small cafe and my 70s 701always won!!!
Arguably the nylon gears were a good idea as they serve as a "fuse", preventing the whole gearbox being wrecked if the machine is overloaded/overworked. Which is fine as long as you're able to fix it (or find someone who can do it)! These machines were primarily designed for domestic mixing/whisking tasks and, in the era of the A701A, the dough hook was sold as an optional accessory.
Hi, Thank you SO MUCH for this video. I just bought a 1960s Kenwood A701A on ebay and am waiting for it to arrive. Its going to be my first kenwood restoration project (I've restored a few vintage Singer sewing machines and a 1970s Hoover before). My question relates to testing the motor. Sadly, although the hoover I restored was working when I bought it...after all my hard work, the motor went a week after I restored it. Just wondering if there is any way I can fully test the Kenwood motor (other then leaving it run at full speed for a few minutes)...just trying to avoid the same problem. cant really find many online resources!Thanks again for your video! Much appreciated. Laura
Hi. I just brought one on this. And after 1 minute while spinning there was a strong smell of electric cable burn. I shwtched off, Im sure is still working there is something you think I can do, check? Thanks.
I can't seem to find any way to contact the company for Instruction Manual for a vintage machine I just inherited. Model# A907D Blakeslee. Anyone know how I can call the company? The website won't take this old model number into search bar.
Yes, I do. His name is Eugene, and he lives on that street adjacent to the mall, the one with all the bi-level shrubbery. Go an see him, and say that Archibald Scuttlesworth sent you. You'll also need to know the special handshake, or he won't let you in. Firmly grasp his left hand, and whist shaking use your index finger to poke at his palm, while repeating "MMMMMMMMMMM, that's the spirit!". He's a fast worker, highly qualified, good prices, with a (barely noticeable) hygiene problem.
My mum had one circa 1970's -- a noisy piece of crap - HA - probably did what my mum wanted - but from day one - it was so noisy us kids in the lounge room watching TV had to give up listening to the cartoons when mum used it - HA - I am sure it damaged her hearing. Have a nice day all. CHEERS from AUSTRALIA.
Looks fantastic! Is that a 701? Would the more modern 901 have the same metal body construction? Also, could you write down the paint used, as I'm not familiar enough with the brand to pick up from audio alone! Many thanks!
The paint job looks really nice. What is the paint you used and did you need to use a primer? Also it would be good to see the restored machine in action ;-)
Hi Benjamin. I used Rustoleum Painter's Touch Semi Gloss. The machine ran into a bit of trouble. I need to get a new star lock washer when I go into the city again. I will do an update once it's all sorted.
Hi Emile. I have my grandmother's Kenwood which still works like a charm however the bowl got broken in a move. Where did you get the stainless steel bowl? Thanks, Leigh
We got it like that. So not sure where to get them. Otherwise try these guys. www.kenwoodchefrestore.co.uk/Kenwood%20Chef%20Models1.htm Not sure where you are based though.
Sorry I'm a bit confused about which paint was used. You mentioned a couple of coats of Hammerite smooth. Then a top coat of Rust-oleum Ultra Cover. Was that lacquer or did you change your mind about the Hammerite and use the Ultra Cover as a top coat? Thanks for the helpful video.
Alan Macraild HI Alan, I started off with Hamer items but it kept making drips no matter how hard I tried. I eventually switched to Rustoleum . Worked so much better. Sorry for the confusion.
Thanks for the clarification. That makes sense now. Can I also ask what brand of lacquer thinners you used and where you got it? It looks very effective and I'm having trouble sourcing a good product on line. Incidentally, I live in Scotland. Thanks very much, Alan.
Oh dear, you already have it in pieces. The "planet hub" on my machine is cracked right across. I unscrewed that central screw hoping it would come out but it it firmly fixed in place. I don't want to try forcing it because I don't know if it is fixed to something else. Is there anyone on this thread who can tell me how to get the hub off and how to replace it with the spare part. This is the part I am talking about: www.4kenwood.co.uk/chef-food-mixers/chef-range/planet-hub-chef/product.pl?pid=3878432&path=590704,71679
Oh, that is beautiful! I'm still using my Mom's Kenwood Chef that she purchased in the late 1960s. It was purchased through Sunrise Industries in Toronto, Canada (I live in Nova Scotia). I never thought of it as being vintage, but I guess that's exactly what it is! Works like a charm!
My Kenwood Chef 701A is just the most wonderful machine and it has been in constant use since 1971. However last week it suddenly made some strange noises and the outside casing was very hot to touch. I turned it off and did wonder if I had just used it for the last time. My husband and I watched your video and decided we would give it a try ...Yes, we did it, thanks to you. Our machine is up and running again. The grease in the gearbox which obviously had never been changed, there was some empty spots but also solid in places. Cleaned and re greased and runs like new...Thank you so much for you instructional video.
Marie Thuresson Glad my video helped and thanks for the kind words.
Great work. It truly looks like new. I have a KM201 that needs plastic case repairs and missing cover plates and that is proving to be a challenge for me.
By the way, you wouldn't last 10 minutes at my office if that crop duster bothers you. I have a media helicopter that lands 10 metres outside my office window. Coming and going. All day.
What a great job - both with the mixer and your instruction video. 👋👋👋
Hi i to have a Kenwood KM200 and i am in the process of replacing the the electrical components. Your kenwood A700A is really clean and like new well done. The only thing i would use is a suger soap to clean of the grease parts its good on plastic and bright it up. Hi from IRELAND 🇮🇪
Many thanks - I am about to start doing one for my old 94 year old Aunt. She has had it since new way back when . . .
Excellent video - good clear audio and attention to detail as you disassembled and reassembled after refurb. Wish you had run it though would like to hear how loud it is.
If you ever have to get into the gearbox to replace the grease or change the brushes out please do another video. That was very sweet of you to redo it for your wife.
Thank you for your kind words. Trust me, it is really loud! 😀 But working like a charm.
Emile
3 years ago I watched this and it fascinated me. However mine is a hobby turned into a business. My mentor is Mike Stratton from the UK and since then I started to refurbish and overhaul Kenwood Chefs.
However I focus on the 1950's A700 models right up to the KM range. And we do restore or replace the speed control circuit boards. But the Britsh machines, over engineered, will last forever. Sadly not the Chinese models. I do not touch them.
Where are you based?
@@EmileTheart I live in Glencairn. Close to Simon's Town.
Shame you are not nearby. My kenwood major 707A bought in 1974 has started doing the fast speed on all settings so I am looking for someone who could repair it but it is not easy! I am not getting rid of it under any circumstances! I am not impressed with the new ones, they look so flimsy!
Hello Sir, I therefore allowed myself to contact you because I have a Kenwood chef A701A and it has just broken down. When I press the blue button on the speed variator it starts normally at all speeds (constant increase in speed) and the more I turn it the faster it goes. Only when I put the sheet or the hook with a preparation inside it leaves timidly and stops immediately turning although the engine is still very audible. I think he no longer has the strength to train the accessories. I started to disassemble it because I was thinking of a problem with the strap on the top but it looks in good condition. Before dismantling everything, could you help me by giving me some tips on the breakdown. Hope you can help me thank you in advance. cordially
@@christianeferrucci1725 Hi! Is it the A701a like the Chef in Emile's video?
Inspirational restoration, thankyou for sharing.
your a patient talented guy. well done man
We are still using one in far north Queensland must be 30 years old in our restaurant
Thanks for this, I love kenwood mixers there the best!
Can you help, I cannot get the mixer cover to lock in place.
Hi there, great video you have done such a beautiful job! I have just bought one at auction, my main problem is the smell! It was not well cared for and is incredibly greasy and smelly, I want to strip it and clean it to try and get rid of the stench, can I clean all internal parts with thinners or metholated spirits? Also the attachments are tarnished / rusted,do you know what would get this off? Also the piece of felt in mine is equally disgusting, can this be cleaned or shall I get a new one? Any advice so appreciated!
Methylated spirits: yes - it is akin to IPA or denatured alcohol and commonly used for cleaning electronics and should easily wipe away grease.
Thinners: No - not unless you know exactly what is in them and know they wont damage existing paint work and/or electronics.
Excellent work!
I have a Kenwood KM 210 that started smoking the other day. Could you indicate a site where I can order a new motor?
Paula
Please can you advise what paint you used and did you use a primer?
My dough hook keeps unscrewing the top part and gets stuck in the dough!
Did you greese or change bearings and did u fit new brushes to motor?
Just lubricated the bearings. Brushes was still good.
FANTASTIC ARE YOU DOING ANYMORE U TUBE UPDATES ON HOW YOUR NEW LIFE IS GOING,WOULD BE EXTREMELY INTRESTING
@@EmileTheart REALLY ENJOYED YOUR VIDEO PROFESSIONALLY PRESENTED THANKS
I have some video ideas. Life has just been a bit crazy.
@@EmileTheart I have followed the development of South Africa closley,your intended lifestyle seemed both suited and idylic did u acheive this
I have one like that also. It gets very hot when running for 15 mins. I was thinking that it might need lube in the gear. Do you know about that? or why it gets very hot (you cannot touch it)
Hi there, I have a similar mixer and the speed dial was not working unless it was being pushed in, which it wasnt doing previously. I took the speed dial off and am now having issues putting it back on. Do you have any suggestions for this. Thanks
Think these are 70s, my granny’s is spilling what looks like oily grease out the back and smells of burning, any ideas?
Hi what kind of paint is the one you use?
i live in argentina so teh brand you use is not available, but if i knew what kind of paint it is, maybe i can find it.
I use Rustoleum Double Cover Satin. Any good quality spray paint will work.
I have one, but there is issue with it can you help me to fix it ? A701a
The k-shaped stirrer (English is not my first language, sorry) won't lock in properly. It looks to have all its bits and pieces comparing to the other parts. The sort cross bar that engages with the holder is quite close to the big hex nut though. Any ideas? Much appreciated. Thanks in advance! Cheers
Hi. I have taken apart my Kenwood Major. Is there a trick to putting the main hinge pin back in? Having trouble with the spring pressure... Also: where can I get the clip/washer that holds the spring on the release button/pin in place? It broke on disassembly... It's the one that goes into the groove on the pin. Thanks.
Sería bueno escuchar en español
I having problem with the machine after one minute of running it smokes I think it need coolant oil where to put this oil?
Sir where exist the reset button ?
Hi you've inspired me too refurbished my old chef A701. what paint stripper did you use ? the product I tried doesn't work on the old paint at all Cheers
I used laquer thinners. Worked like a charm.
Great video, can you please mentioned again what did you used to remove the paint?
I used laquer thinners bit pretty sure paintstripper will work just as well.
Hi, my kenwood KMC570 has a burst of speed at speed 3 and i always have to turn the speed dial very slowly to avoid or get out of the speed burst. is this normal?
These fabulous mixers got an achilles heel when they had nylon input and planetery cogs. Working in a greasy enviroment these gears got brittle and split working under heavy loads.. Even the alloy ones could do the same when regularly kneading bread dough. I dont believe they were ever made with hardened steel. An ideal choice for the torques they had to deal with. Sadly because of this that clumsy and awkward Kitchen Aid thing so much featured by TV chefs has won over. Now Kenwood have sold out to the form over function brigade and style there mixers the same way. Ive used both in a small cafe and my 70s 701always won!!!
Arguably the nylon gears were a good idea as they serve as a "fuse", preventing the whole gearbox being wrecked if the machine is overloaded/overworked. Which is fine as long as you're able to fix it (or find someone who can do it)! These machines were primarily designed for domestic mixing/whisking tasks and, in the era of the A701A, the dough hook was sold as an optional accessory.
Hi,
Thank you SO MUCH for this video. I just bought a 1960s Kenwood A701A on ebay and am waiting for it to arrive. Its going to be my first kenwood restoration project (I've restored a few vintage Singer sewing machines and a 1970s Hoover before). My question relates to testing the motor. Sadly, although the hoover I restored was working when I bought it...after all my hard work, the motor went a week after I restored it. Just wondering if there is any way I can fully test the Kenwood motor (other then leaving it run at full speed for a few minutes)...just trying to avoid the same problem. cant really find many online resources!Thanks again for your video! Much appreciated. Laura
Try these guys. They might be able to help. www.kenwoodchefrestore.co.uk/Kenwood%20Chef%20Models1.htm
Good but how do you get it to bits?
Hi. I just brought one on this. And after 1 minute while spinning there was a strong smell of electric cable burn. I shwtched off, Im sure is still working there is something you think I can do, check? Thanks.
Is it fixed ?
I want to buy the km220 for 100$ but I’m afraid the parts are hard to fine in the US.
Hi do u do restorations on kenwood machines
Unfortunately not. This was a strictly once off DIY project
Which painter thinner did you use? I tried using white spirit, and it did absolutely nothing to remove the old paint.
I used laquer thinners.
Hi, our switch has broken. How do we open it to get to it?
Gloves mate.
Hi!
I have recently inherited a chef and I don't know how to change from rear blender to the front mixer!
Hope you have worked it out by now. Take the blender off, place a beater in and switch it on.
Is ie an A701a like the one in Emile's restoration video?
I can't seem to find any way to contact the company for Instruction Manual for a vintage machine I just inherited. Model# A907D Blakeslee. Anyone know how I can call the company? The website won't take this old model number into search bar.
Anybody know of someone that can service my old me wood chef
Yes, I do. His name is Eugene, and he lives on that street adjacent to the mall, the one with all the bi-level shrubbery. Go an see him, and say that Archibald Scuttlesworth sent you. You'll also need to know the special handshake, or he won't let you in. Firmly grasp his left hand, and whist shaking use your index finger to poke at his palm, while repeating "MMMMMMMMMMM, that's the spirit!". He's a fast worker, highly qualified, good prices, with a (barely noticeable) hygiene problem.
My mum had one circa 1970's -- a noisy piece of crap - HA - probably did what my mum wanted - but from day one - it was so noisy us kids in the lounge room watching TV had to give up listening to the cartoons when mum used it - HA - I am sure it damaged her hearing. Have a nice day all. CHEERS from AUSTRALIA.
How did you polish the plastic components - Silver polish?
John Francis Yes. It is stock standard silver polish. The brass polish works as well. Even toothpaste will do the trick.
Looks fantastic! Is that a 701? Would the more modern 901 have the same metal body construction?
Also, could you write down the paint used, as I'm not familiar enough with the brand to pick up from audio alone!
Many thanks!
Patrik Floding I am not sure about the 901. I use Rustoleum Painters Touch Double Cover for all my projects. I used the semi gloss for the mixer.
The pedestal and middle section of the 901 are cast aluminium alloy, just like the 701, but the top cover in almost all cases is plastic.
Hi, what chemical was used to strip down the paint so effectively? Thanks
I used lacquer thinners.
Brake fluid works well on objects you can rinse with water. Or buy a can of paint stripper
Bom trabalho.
Where is the reset button
The paint job looks really nice. What is the paint you used and did you need to use a primer?
Also it would be good to see the restored machine in action ;-)
Hi Benjamin. I used Rustoleum Painter's Touch Semi Gloss. The machine ran into a bit of trouble. I need to get a new star lock washer when I go into the city again. I will do an update once it's all sorted.
@@EmileTheart did you get this sorted in the end? A starlock washer for a 5 mm diameter shaft is perfect for the hub gear.
@@benjamindaniel8467 I did and the machine is working like a dream again.
Hi Emile. I have my grandmother's Kenwood which still works like a charm however the bowl got broken in a move. Where did you get the stainless steel bowl? Thanks, Leigh
We got it like that. So not sure where to get them. Otherwise try these guys. www.kenwoodchefrestore.co.uk/Kenwood%20Chef%20Models1.htm Not sure where you are based though.
Thanks Emile. I'll contact Kenwood.
i need former kenwood chef mixer in uk ?
What a puzzling comment.
Sorry I'm a bit confused about which paint was used. You mentioned a couple of coats of Hammerite smooth. Then a top coat of Rust-oleum Ultra Cover. Was that lacquer or did you change your mind about the Hammerite and use the Ultra Cover as a top coat? Thanks for the helpful video.
Alan Macraild HI Alan, I started off with Hamer items but it kept making drips no matter how hard I tried. I eventually switched to Rustoleum . Worked so much better. Sorry for the confusion.
Thanks for the clarification. That makes sense now. Can I also ask what brand of lacquer thinners you used and where you got it? It looks very effective and I'm having trouble sourcing a good product on line. Incidentally, I live in Scotland.
Thanks very much,
Alan.
Alan Macraild I bought mine from our local hardware. Nothing fancy. Think it was their house brand.
Ok. Thanks again. Alan
You live near airstrip with aeroplanes?
xenon53827 haha no. Must be the crop spray planes you are hearing.
Ah ok. Glad to see you like you Kenwood, I have several videos and a sit on my A701, "Kenny the mixer' !
reocarchive.byethost31.com/kenwood/index.html
As opposed to an airstrip with sailing vessels?
Oh dear, you already have it in pieces. The "planet hub" on my machine is cracked right across. I unscrewed that central screw hoping it would come out but it it firmly fixed in place. I don't want to try forcing it because I don't know if it is fixed to something else. Is there anyone on this thread who can tell me how to get the hub off and how to replace it with the spare part. This is the part I am talking about: www.4kenwood.co.uk/chef-food-mixers/chef-range/planet-hub-chef/product.pl?pid=3878432&path=590704,71679
Bits left over aren't much of a problem unless you are working on a nuclear submarine.
Haha that is true!