Not only did his advice work perfectly, the first time I tried it, I understood this video from the very beginning. I'd listened to another video from "professionals" and it was full of both confusing and contradictory info. ( I listend to it 28 times and never could match their advice with the actual unit.) This guy beats them all.
The part where you put the flat head screwdriver in, for my sprinklers the screwdriver goes all the way in deep and I can’t see or feel what to turn 🤷🏻♂️
I have this exact sprinkler head and it’s going in a 360° motion. I only want it 180° as it sits against a fence. This video did not address how to adjust to just a half circle.
You can buy rainbird 5000 that are 360 degree sprinkler head or you can adjust the back of the sprinkler with a flathead screwdriver by turning it towards the positive sign
If the sprinkler is behind the lawn edge curb, it is usually wise to have the sprinkler raised a bit to work with the curb and not ruin the rain curtain these rotors have
Literally the most simple explanation out there...thanks
Short, simple and straight to the point. Thank you so much for this informative video.
Best explanation I have found so far. Thank you!!🎉
Best video yet. Keeping it simple and short. Thanks
Great video! Had all of the steps I needed in a short, easy to understand clip. Thanks!
Agree with comments... easy and fast. Too many make this way too complicated. THANK YOU.
Not only did his advice work perfectly, the first time I tried it, I understood this video from the very beginning. I'd listened to another video from "professionals" and it was full of both confusing and contradictory info. ( I listend to it 28 times and never could match their advice with the actual unit.) This guy beats them all.
Thanks that was the best explanation on replacing and screwing in with the left stop set.
Good job man simple explanation
abut to make some of these on PVC piping this is what I needed to see ty
Just force it to the left til it’s where you want, turn to the right to find your right and add or take off angle if needed. Way simpler and faster
Only the 5000plis has the slip clutch. Old style is as it shows in video. Tested it today. Had to unscrew old style as shown in video. What a pain.
Can I adjust how far forward it goes? Mine is spraying a tree in its pathway
You have to physically move the base to set you left stopping point. Then use the screw to adjust right stop.
Need more detailed explanation for a non handyman. Please I would be very grateful
Thank you
The part where you put the flat head screwdriver in, for my sprinklers the screwdriver goes all the way in deep and I can’t see or feel what to turn 🤷🏻♂️
hello friend how much 5000 size cost
I have this exact sprinkler head and it’s going in a 360° motion. I only want it 180° as it sits against a fence. This video did not address how to adjust to just a half circle.
You may have a 360 degree sprinkler head. If so you would need to replace the whole sprinkler to one that is not a 360 degree.
Thanks ! I can do it by myself now. 😂😅
👌
This works on the 32SA i imagine?
UA-cam has its uses. Thanks
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
How u make it to go around all the time
You can buy rainbird 5000 that are 360 degree sprinkler head or you can adjust the back of the sprinkler with a flathead screwdriver by turning it towards the positive sign
They don't seem to be in the ground deep enough though
I think because he’s trying to compensate for the curb
If the sprinkler is behind the lawn edge curb, it is usually wise to have the sprinkler raised a bit to work with the curb and not ruin the rain curtain these rotors have
👍
Easy to set the left when you can easily access it to unscrew it. Pain in the butt if you can’t.
sorry, no. incorrect
These rotors are the worst ones I personally use k Rain pro series or hunter rotors