Це відео не доступне.
Перепрошуємо.
Epic 2 full disassembly / service
Вставка
- Опубліковано 15 сер 2024
- Hi guys got a video here today on the Epic 2 and in this one we strip the rifle down and start work on making it a little better!
Hi guys got a video here today on the AGT Vulcan 3, and in this one we make a Muzzle brake for the rifle.
Sekhmet gauges: 10% off
Code: "SUB12"
www.sekhmetonl...
Merchandise link:
personalised.c...
Thanks for the strip down. It does appear to be a very nicely engineered rifle, machining looks to be good quality as well. My rifle did come with the M3 bolt and one steel pin that I haven't figured out what it is for yet.
we got the bolt but no pin 🙄 thanks for watching 👍👍
Excellent strip down video. Looking forward to seeing your new valve design. Thanks for posting the video 👍
thanks for watching 👍👍
They certainly like their ball bearings, don't they :-) Nice clear video with a couple of interesting designs...looking forward to see how they are improved. have fun at the shooting show :-)
they could have made them all the same size would make life a bit easer 🤣🤣
very nice mate . well engineered bit of kit . me i would definitely have to label some small boxes or jiffy bags up 🤣🤣🤣🤣 would get in a right mess with all those different size ball bearings and springs . but all in all not a bad rifle to take apart. that reg and valve system is very interesting. must have quite a rapid shot cycle and reg recharge 👍
yes a bit fiddley but not bad, yes the shot cycle is very snappy 👍 thanks for watching 👍👍
Like the look of the large diameter bellevilles, prefer those to the tiny ones in my m3 regs.
yes i prefer the larger washers in regs 👍👍
Thanks mate. Awesome 🤟👍
thanks for watching 👍👍
Another fantastic video 👌🏻👌🏻
thanks for watching 👍👍
quality video,
I'd like to see the trigger cassette in detail, it looks very basic ...
it is but works well 👍👍thanks for watching 👍👍
Looking forward to see what improvements you can do on valve housing as you mention
thanks for watching 👍👍
Great informative video as always👍🏼
Thanks 👍
Hi, great video, I would just like to point out that the barrel should not be loosened the way you loosened it, because it is preloaded to a certain pressure in Nm, it should be loosened at the body of the weapon and tightened again at the body.
yes i agree if you are just removing the barrel and are not stripping the shroud ETC but we striped it so is not an issue, we did go through the preloading of the barrel in the last epic vid we did, torque setting is 18 to 24 NM 👍 thanks for watching
I know you know that but I meant it about other users :)
Excelent video, thanks a lot!!!!!
thanks for watching 👍👍
Thanks for sharing be safe buddy 💯
Thanks 👍👍
Excellent detailed info as usual.
thank you 👍👍
Please, the reasemble video when available, thanks again!!!!
it's coming 👍👍 thanks for watching 👍👍
Really great video! I wanted to make this guide but you saved me from it 😜
nice one , thanks for watching 👍👍
excelente video. gracias
thanks for watching 😀
Hi buddy, any chance to get o rings size? Love your vids!
Have fun at the show ,I've now got the Vixen short, and the tiny gauge is upside-down ,how is the best way to adjust it ,I know I have to remove all the air from the bottle and reg ,is it just a case of getting a thicker o ring ? Thanks 👍
He has a video all about adjusting the position of gauges.
@@MrIliff I remembered after I wrote this as I've watched it but thanks for the heads up👍
we will😀😀 thanks for watching 👍👍
It is too bad you can not access the valve adjuster from the front, having to take it all the way out of the rifle is a pain.
As mentioned the several size of steel balls is also silly, also that side cover piece i do not get why there is a ball / spring on that at all, well aside for the cocking lever being able to be flipped.
nice 😀😀
Thanks 😊
Can it used for longrange?
yes i would think so 👍👍
👌👌👌👋👋👋👍
thanks for watching 👍👍
1000000000000000000000000000000000000000000 like
thanks for watching 👍👍