Thanks a bunch Joe, my wife's ML320 idiot lights has been on (she kept reminding me) and instead of sending it to the dealer I jumped online and found out it was from brake wear. I just googled it and your video was the first to come pop up on google for youtube and yes it is a simple job that even I can do it. You are right there is a stigma about working on these and keeps me from working on it. Gonna tackle it though, thanks for your video DIY!
Thank you. Don't know when you made this. But it's valid in 2022. With gas in this country being so high. All but the rich, are bicycling, walking, or staying home. Who can afford a mechanic, and things still break. Thank you for your efforts. It was a life saver. I liked, and subscribed. Have a nice day.
Thanks for your time to do the videos. I am getting ready to do mine and find your video helpful. Please clarify one thing. In this video you say to use a TX-40 for the caliper bolts but in the continuation video you say to use a TX-30. Which one is correct?
Best to replace the pads and rotors at the same time. Not required but you’ll probably get the performance this way out of your brakes. Hope that helps!
@@joesnowmobiles in currently doing the abs motor repair and rebuilding the calipers for which this video showed me how to remove the calipers. only thing that I'm unsure of is how to clamp the break line so it don't drip. the brake line is so think and tough. you should do a caliper rebuild video.
dgn107 well I don’t recommend clamping the line that can damage it. Just disconnect from caliper and stick a rag in the hose hole and lift the hose as high as you can that should slow down the drip until you can install the new caliper. I never rebuild the calipers it’s just easier to replace them and the time vs cost is minimal. Hope that helps!
OMG man I need to change my rotors and break pads for my 1999 ml320! That would be awesome! And I just ordered my lateral accelertion piece off of ebay and I'm going to change it becase the BAS ESP light comes on and off and I think the sensor might be the problem, and the car is running slower than usual. So hopefully that might be the fix
your videos have been very helpful to me with my ml320 i have to do a set of valve covers on mine would love to see that video specific to the ml320 on those thanks again
Hi Daniel, although I have not worked on the 270 the process would be the same. However the part numbers might be different for the brake pads and rotors. Hope that helps! Joe
I'm in need of front brakes pads and rotors and something else the man wrote down. My car is making a noise is the promotion over to sending a Free set. I was told $873.00 for front brakes and rotors. Help me please
Save a little money won't save a life. I don't mind the car can't run but I do mind the car couldn't stop. Rotors and pads are cheap since you work on your car, you already save labor cost. I paid $170 for a set of 4 anti-rusts coated with cooling holes and slots rotors, 2 sensors, and 4 sets of ceramic brake pads for my Mercedes ML320. Use ceramic brake pads for a sure stop and cooler braking.
Hey thank you very much that was very informational I have a 98 ML320 it's almost sounds like it's metal to metal and unsubscribing and commenting so hopefully I can be a lucky winner all bs to the left hard times man anyway thank you very much blessed night.
Thanks a bunch Joe, my wife's ML320 idiot lights has been on (she kept reminding me) and instead of sending it to the dealer I jumped online and found out it was from brake wear. I just googled it and your video was the first to come pop up on google for youtube and yes it is a simple job that even I can do it. You are right there is a stigma about working on these and keeps me from working on it. Gonna tackle it though, thanks for your video DIY!
u hav a natural trustworthy demeanor , u r meant to do as u r doing!!. keep it up !!!!. u r highly appreciated !!!
thank u from all...
Thanks so much for your kind comments!
Thank you. Don't know when you made this. But it's valid in 2022. With gas in this country being so high. All but the rich, are bicycling, walking, or staying home. Who can afford a mechanic, and things still break. Thank you for your efforts. It was a life saver. I liked, and subscribed. Have a nice day.
Glad it helped you!
Doing my moms ML 320 today
Thanks for your time to do the videos. I am getting ready to do mine and find your video helpful. Please clarify one thing. In this video you say to use a TX-40 for the caliper bolts but in the continuation video you say to use a TX-30. Which one is correct?
Just got a 1998 mercedez ml320 and was told that you can only change both rotors and pads when needed, really? That sounds odd. What do you think
Best to replace the pads and rotors at the same time. Not required but you’ll probably get the performance this way out of your brakes. Hope that helps!
Great video very Informative for me exactly what I was looking for, thankyou
Glad it was helpful!
Thank you this is the best video I have seen vary nice job thanks again
Good video, thanks! I ll be doing brakes on my 09 ml 320 in the next week or two, this was helpful
Have you replaced the rack and pinion on the ml320
Thanks man I have to change mine soon. really helpful video
When you push the cylinder in, make sure you do it either very slowly or loosen the reservoir cap or you could blow a seal in the master cylinder.
Good point. I found that out years ago, the hard way.
enjoyed watching this video on how to replace brake pads. Have a blessed day
Joe keep doing ml320 videos, you are the best source for this car
dgn107 thank you for kind comment!
@@joesnowmobiles in currently doing the abs motor repair and rebuilding the calipers for which this video showed me how to remove the calipers. only thing that I'm unsure of is how to clamp the break line so it don't drip. the brake line is so think and tough. you should do a caliper rebuild video.
dgn107 well I don’t recommend clamping the line that can damage it. Just disconnect from caliper and stick a rag in the hose hole and lift the hose as high as you can that should slow down the drip until you can install the new caliper. I never rebuild the calipers it’s just easier to replace them and the time vs cost is minimal. Hope that helps!
it helps a lot, thanks for the reply!
@@joesnowmobiles I more so wanted to rebuild the calipers to get a better idea of how they work
Joe how are you doing . Do you have a video on how to replace rack and pinion on 2001 ML320 ? Please
Very helpful video thanks
Hey I just recently purchased an ml and was wondering where would you recommend me get a set of rotors and breaks at a fair price?
Sorry for late reply but I find great deals on Amazon and EBay! Hope that helps
OMG man I need to change my rotors and break pads for my 1999 ml320! That would be awesome! And I just ordered my lateral accelertion piece off of ebay and I'm going to change it becase the BAS ESP light comes on and off and I think the sensor might be the problem, and the car is running slower than usual. So hopefully that might be the fix
Thank you for the Video helpful
Thank you
I have that same ratchet I like it
Great detail, hope to see more
Awesome Job👍
You're doing a great job sir!
your videos have been very helpful to me with my ml320 i have to do a set of valve covers on mine would love to see that video specific to the ml320 on those thanks again
v r thanks! I do have that job planned for a future video. Probably a good fall project when it’s not to hot out!
Joe
i appreciate that joe
when will the giveaway happen and what fluid do you use when you service your ml 320 transfer case thanks
v r giveaway is happening tomorrow! I will let the winner know on July 4th!
very cool thanks
GOOD VIDEO
I know this is an old video but I was wondering if you could tell me what brake caliper tool set you were using and where you got it from?
Here is the link to the kit I use hope that helps! amzn.to/2Ppw4if
Thank you!
I need new discs. Like your tube
What tool did you use to get the two bolts off
I have a 99 ML320 and I desperately need the front brake pads brother
Where do you lift them from ?
How do I remove the studs on this car
Gat help working on my project ml320, 2001in American Samoa
I need to change rotors/pads on my 2002 ml320.
Nice job. I have a 1998
In the front and back brakes do all four side have sensors?
Catalina Rodriquez just one in the front and one in the rear, typically on the drivers side of the car.
@@joesnowmobiles
Thank you.
5 years later, I still want to know who got them free rotors, lol😀
Are the brakes the same on the ml270 mate
Hi Daniel, although I have not worked on the 270 the process would be the same. However the part numbers might be different for the brake pads and rotors. Hope that helps!
Joe
Yes help me I just got a Mercedes Benz ml 430 2001..
I'm in need of front brakes pads and rotors and something else the man wrote down. My car is making a noise is the promotion over to sending a Free set. I was told $873.00 for front brakes and rotors. Help me please
Have they gone.
Is it 2005 ml350 same procedure
Yes it is, hope that helps!
Joe
@@joesnowmobiles that's bro..
Who won?
Save a little money won't save a life. I don't mind the car can't run but I do mind the car couldn't stop. Rotors and pads are cheap since you work on your car, you already save labor cost. I paid $170 for a set of 4 anti-rusts coated with cooling holes and slots rotors, 2 sensors, and 4 sets of ceramic brake pads for my Mercedes ML320. Use ceramic brake pads for a sure stop and cooler braking.
Interested!
Good video, informative. I would love not to pay for breaks
Just watch the video
Do you have abs?
Starts at 2:30
My Abs light is on?
Hey thank you very much that was very informational I have a 98 ML320 it's almost sounds like it's metal to metal and unsubscribing and commenting so hopefully I can be a lucky winner all bs to the left hard times man anyway thank you very much blessed night.
This is a very misleading video. Where are the hookers and blow lol...kidding. Good job. Tells what you need to know.
Minister wizard help me Mr wizard ivy breaks I need
where is your safety stands?
Ahh that's koo
Crap too long use a g clamp
Joe..
More work work,, less chat chat,
You go on so much about nothing...
Just get on with doing the stuff.... that's what I came here for...😉
Danny mills thanks I’ll take it under consideration 😝