good evening brother, your creativity is very interesting 👍👍,, made me inspired, oh yes the dynamo you use is what type of dynamo is it and how many Watts of power is it?
excellent, u r genius. good job.😊. my question is, r u using braked motor or just reguler induction motor capacitor? i d like imitate ur hoist pls tel me the spec of the electric motor, thx
Un polipasto divino de la muerte, muchas gracias por compartir tus conocimientos,un saludo cordial y por supuesto un gran like desde Narón, Galicia (España)
@@zemongoose123 I have worked in elevator industry for 30 years where they still use worm gear connected to the motor with a electro magnetic braking system in between. And the elevator starts moving (to up or down depending on the load inside corraborating with counter weight load) in power off condition if you losen the electro mechanical brake manually, means disengaging the brake. And the same can happen here also. The load forces the motor to turn, of course here it will be in down direction, in power off condition.
Hi, superb build man!!! Can you help me with one information please? About Gear&Worm reduction Ratio, at One turn of the round Gear, hoe many times the worm is turning? Thank you, I appreciate your videos 🙏🍾
Yes you can. I have made two of them but I buy the complete reduction gear box. Here he is using parts of a reduction box only. Have to use a reversing switch for the motor.
is there any possibility to contact you guys As i am mechanical engineer i have to design project of winch as your video. i need your guidance. Thank you
Hello Sek, very interesting work. may i ask which motor specification( KW/HP; V/RPM, etc.) you are using. I have very old koenig winch which i want to power it with electric motor for PULLING (not Lifting) logs in the forest. Your response would be very helpful.
Great build man, hope to see more videos from you. If you don’t mind can you share with me how did you manage to forward and reverse the single phase motor?
hello guys
here is the part two of the video
ua-cam.com/video/waR8yd-XgtY/v-deo.html
Can it work in building construction lift
good evening brother, your creativity is very interesting 👍👍,, made me inspired, oh yes the dynamo you use is what type of dynamo is it and how many Watts of power is it?
Very good
Is not rotate reverse..when that lifted upward and you turned of the motor?? How it hold? There only?
As you can see i used a gear worm type mechanism, so it is impossible to move when motor if off unless gears get broken
But how reverse motor or mechanism ?
good job, but you're so lucky you didn't bring the roof down
Done Profesional febrication of electric hoist. Top job.
Good
Great job 👍👍👍
Cảm ơn bạn đã chia sẻ cách chế tời thật đáng quý , nhưng cho tôi hỏi chút , loại này có cần phải phanh từ ko ạ
Wow 👍👋😮👩🏭 good job 👏👍
excellent, u r genius. good job.😊. my question is, r u using braked motor or just reguler induction motor capacitor? i d like imitate ur hoist pls tel me the spec of the electric motor, thx
Me too
Un polipasto divino de la muerte, muchas gracias por compartir tus conocimientos,un saludo cordial y por supuesto un gran like desde Narón, Galicia (España)
I just want to ask questions please under the cable roller the plate that you weld what's Doe's it mean what is the need under the cable
Sir, magkano magpagawa na kaya ang 2tons ?
Thank you
Great video, congratulations brother. Can you tell me about the lower gear and which device can I find it?
Splendid! Things couldn't be better.👍👍
Thanks brother
the crane does not have a safety brake?
Österreicher ist sehr schlau Vielen Dank, dass Sie dieses großartige Video geteilt haben 🙏👏🏻👏🏻👏🏻👏🏻🇧🇷🇦🇹🇦🇹
Awesome 👏👏👏👏👏👏
Hello sir you have an awesome skills, where are you Located, thanks and God bless.
That's a nice build. I really like that simple but working cable handling clamp thingy. ( I tried to find right word for it, guide, tensioner.. 🤔 )
Maybe wire stabilizer? Hahha lol also look for it. Thanks for stopping by brother
@@SekAustria nice idea, but i think it isn't safe/good for wire rope, it can make a surface damage that make it unsafe
Mini winch 500kg power.?
Bon boulot, mais j'aimerai bien savoir comment ça fonctionne sans frein pcq generalement les monte charge sont doté de moteur avec electrofrein
Lovely! Yo should also include a brake mechanism to stop the motor free run in case the power goes off while there is load on the rope.
Thanks.
Doesnt matter with a worn drive gear that's why they use them
Yep. It will not go down. Take care guys
@@zemongoose123 I have worked in elevator industry for 30 years where they still use worm gear connected to the motor with a electro magnetic braking system in between. And the elevator starts moving (to up or down depending on the load inside corraborating with counter weight load) in power off condition if you losen the electro mechanical brake manually, means disengaging the brake.
And the same can happen here also. The load forces the motor to turn, of course here it will be in down direction, in power off condition.
you could get a power feed easily on the lathe, with a few more gears/belts.
Thanks bro
Ingenious !
Good job! I have a 20,000 lbs worm winch with release clutch, just need a motor and pulleys set up.
Galing nman niyan! 👏
Thanks po maam
Agree!
its actually a very useful tool to have and can be gas powered .....well done!!
Great job guys...
Il motore e’ sopradimensionato al tutto ?
Cool! 👍
Bro tanong ko lang, Ano ang gear ratio ng worm gear box nito? Salamat.
Diko kabisado pero malapit sa 1:30
Hello can that hoist be able to reel-in a 200m long wire rope fast?
de que es es ese eje o lo compraron? donde? como lo busco?
Dear, how did you come up with the name Austria?
Its my last name
@@SekAustria Sorry man I thought you live in Austria. Cheers
Where did you get those gears?
From gear box reducer
Are you in Indonesia?
Nope, im in philippines
Spanish name, Asian look, it's Philippines
Wow amazing video keep it up you are awesome
Hi, superb build man!!!
Can you help me with one information please?
About Gear&Worm reduction Ratio, at One turn of the round Gear, hoe many times the worm is turning?
Thank you, I appreciate your videos 🙏🍾
I need buy one like it with a larger drum to pull the submersible pump .. If you can do that please reply my comment.. Thanks
Gracias por compartir a mas de uno nos será útil, mi pregunta es , ¿la carga se queda suspendida o por el contrario al parar el motor caería?
Queda suspendida hasta que usted la baje con la reversa del motor/
Haw many moter in hp
1/2hp
If I want to lift 800 kgs of weight, what should be the power of motor ?
nice job, can u describe the spare part? thx a lot
Very good jop
But how break work
BRAVO
👍👍👍👍👍
👏👏👏👏👏
Another ingenious creation bro.. ang galing!
Gracias felicitaciones y siempre adelante
Ye jugad kaha mileage
Great. 👌👍
Nice job, but need to devise a brake or cog lock to make sure the load you pick up doesn't free wheel and fall.
worm gear cannot reverse in case of electrical failure.
What was the break system????
Good one. Can I know the cost of making this one
Kapampangam ka pala😃
Pero ala ya kasing emergency brake delikadu ya
Pero om ya ing idea sir goods na goods ya
The ending was epic.
Fenomenal hombre , amazing.
No rope guide?
Có bán ở đâu nhỉ, giá thế nào vậy
Price of moter
Very nice. Youre a bad ass!
Can you rotate the worm shaft in both directions?
Thanks :)
Yes you can. I have made two of them but I buy the complete reduction gear box. Here he is using parts of a reduction box only. Have to use a reversing switch for the motor.
Well done!
Super good job!🤗🤗🤗
Super exelente gracias compa
Genius.👍👍simple
Always interesting. Nice job/
Thanks brother
howmany hp. motor requires for 1 ton hoist
is there any possibility to contact you guys
As i am mechanical engineer i have to design project of winch as your video. i need your guidance.
Thank you
Interested to see it with a double pulley system
That would be more powerful. I am going to attach this in a motorcycle lift table with that idea
. nice build ., well done.
Nice build as usual. We put this video on our homemade tools forum this week :)
Fantastic work, dude! Really well done! 😃
Stay safe there with your family! 🖖😊
Thanks brother
Nice workmanship i like way of working. From India.
good work . i like it
Nice build. You will need to grease up the gears
Sir san nakaka bili nung set mo na worm gear dito sa manila po ? Thank you sa pag sagot po sir
Hello Sek, very interesting work. may i ask which motor specification( KW/HP; V/RPM, etc.) you are using. I have very old koenig winch which i want to power it with electric motor for PULLING (not Lifting) logs in the forest. Your response would be very helpful.
Did you show how you REVERSED the motor ?
He did not show that step here but yes, you need a reversing motor switch for this application.
What about break system?
Hola ese motor de cuantos HP es o de cuantas revoluciónes ??
1/2 hp a 1750 rpm.
Nice bro,good job!!!!!
Great build man, hope to see more videos from you. If you don’t mind can you share with me how did you manage to forward and reverse the single phase motor?
Most of the induction motor has a instruction in the cover of the wiring. I hope it helps
Super👌
This is quite impressive,,,, a beautiful tech piece.
Hola amigos, quisiera saber el motor de que potencia es, así como de que medida de grosor es el cable, gracias
Hello guys good job.
Nice !!!
Thanks brother
Super waww 👍👍👍👍
👍👍 V. GOOD
What mm this wire rope
Ye jo gear ha iska link sand kro
How many hp on your motor.? Thank you
1/2 HP at 1750 rpm.
Trò chơi sáng tạo : bạn đã làm chủ nó !
Nice work
Bravo bravo Super
You must cover the gears to put some oil. Dust will destroy the gears by time
bossing saan ka makaka bili nung gear?
muy buen vídeo , pero por favor que pobre presentación personal (no tenía un pantalón disponible) para ese evento?
Karkhna kaha pr hi
VERY COOL. BRO. 👍👍👍👍👍👌👌👌👌👌👌👏👏👏👏👏👏👏🆒️🙌
QUALITY 👍
excelente polipasto. gracias por compartir. los felicito.
May i order it ?
Gear box link pazl.
Está bonito el tornito es hecho en casa, Saludos