Beautiful plane and beautifully built, Capt. Blaz, there is something about a balsa model that makes it real in my eyes. l love your attention to detail, it is clear you have not only the necessary skills to build, but you also have the patients, well done. (l used toothpicks as shear pins through the hinges over 65 years ago.) Thanks for sharing. Larry, from Las Vegas Nevada, USA.
Ohhhh yeahhhh ! Someday I will buy me something like this but with a 4 stroke engine on it. Like Captain Blaž I have as much fun assembling as flying the plane. With the assembly, taking my time with lots of coffee, I grow one with the plane and we get to learn each other. But this P-47 will be great on the runway I’m sure. I’m impressed already!!
Salute!!!! Great tip Capt Blaz on servo orientation to conserve channels (flap servos Y Cable). Do not worry, you almost never babble!!!! We will leave that to someone else. Great Vido!!!! now go have a beer on me. Ohhhhhh wait....... beer after maiden gents!!!!! DG
I just love your videos because of all the good informations and also I love to listen to Pilot Roberts babbling on and on. It cheers me up to listen to you both. Im so excited to watch the maiden video of this Beautiful bird ❤ BIGGEST SALUTE from Las Vegas Nevada USA ❤
What a pleasure to see the Blaz doing his magic to a balsa plane. He makes it very interesting and informative at the same time. This will be one beautiful plane and flight and we all look forward to it. You guys are the best and inspire all of us in ways that reach far beyond the hobby of RC. For that we thank you and Salute to flyers all over the world. Russ NC/USA
This brings back so many fond memories. In the middle to late 1950s my 2 brothers and I (I'll be 77 next month) were into model aviation - .049 glow plug control line flying and rubberband free flight. It turned out that I would do most of the building and they would do most of the flying. Kind of like what you two brothers are doing. looking forward to the next few videos of this plane.
Great job captain Blaź, nicely presented and nicely assembled ! Can I give a tip with epoxy please..... I like the tape idea, when joining the wings ! I discovered "methelated spirits" works really well cleaning the epoxy when it's still wet. You just wipe it off and it's perfect , no smear nothing ! Hope this helps...👍
What a well thought out build you are truly a master builder. Can't wait for this one to be in the air pilot Robert will be nervous when its time to maiden this baby. As I would knowing how much work goes into the gas planes. You will have chills and goose bumps driving to the runway good luck can't wait for this one
I've always been a single child. My FAMILY HAS ALWAYS Been 40 COMMANDO/ MARINE. IM 49 Went in at 19. Served 22years full time then tried to Retire but found it hard so done another 3 YEARS part time. So NOW MY LOVE AND IF I'M HONEST SIR RC HAS SAVED MY LIFE. AND I LOVE IT TOTALLY LOVE IT. YOU TO BROTHERS ARE MY Rehab. I JUST LOVE IT WHE YOU HAVE POSTED A NEW VIDEO. I HAVE ALSO Watched EVERY VIDEO you have posted so far.I REALLY WANT TO THANK YOU BOTH FOR HELPING ME MORE THAN YOU WILL EVER KNOW. I SALUTE YOU BOTH 🇸🇮🇬🇧♥️💯👍
Such beautiful words my friend. Iam really happy that you find fun and joy here with us. This hobby is also all I have left at this moment. Iam still having problems with my hand, cant pass medical exam but goverment took all support away. I dont have a single cent of income at this point. And this after working 25 years 7 days a week for at least 12 hours a day. Iam really so dissapointed at this moment Mike. Good thing that we have at least this channel to keep my mind bussy until I resolve something with doctors. But I always hope for the best and hope good days will come back in the future. Big salute to you my friend and always feel like at home here.
@@PetrincicBrosRC YOU ARE A GREAT MAN WITH A GREAT HEART. GOOD THINGS WILL ALWAYS COME YOUR WAY SIR. P.M.A possative mental attitude. YOU HAVE GOT THAT SIR. NEVER GIVE UP 🇸🇮♥️💯👍
Very nice plane, i can not wait until the maiden com's online, very nice assembly, he knows what he is talking about, and a real engine yes yes, a 10 from me
Airline airline Pilot Robert airline I love when Captain Blaz try the correct your English... I can't wait for the engine to fire up video I think I would have went a lot bigger with the motor a 91 4-stroke or a twin for stroke even though it would have fit outside the cow a little bit it's better to have too much power then not enough. Special thanks and salute to your friend who gave you the plane the airline pilot huge salute from Virginia Beach USA 🇺🇸
Look this is really something my brothers, this will be great to fly. I love building them to Blaz and I also love to buy all the tools and gadgets to use on them. 😍👍
Gentlemen, you have I truly believe the most beautiful, sexuest plane ever built by the USA! I'm currently covering a Top Flight P-47 Thunderbolt. I can't wait until it's ready! Please film yours when you madien flight this season bird!. I'm so in love with it I'm building the bubble top next! Remember to always "Keep your wings in the air'! Love you both and can't wait for your maiden flight!
Look at Dis 😘. Great assembly video Capt Blaz. This Old Man on a rainy day in North Carolina enjoyed it. Pilot Robert did I here you will be doing the maiden? Always loving your videos. ✈️😎💝💝
Captain Blaz! This assembly is amazing! Lots of thinking went into your build. Wow! That engine will really propell this big bird into the air with style! Lots of work. I cant wait for the first flight, it will be awesome! Great job, Captn. Blaz!!!
Great video! Great to see Blaz on the other side of the camera. Can't wait to see Robert's maiden on this baby. It should be terrific. Best to you and your families always! Big salute from Chicago! Oh yeaaah!
Full of good information, this. Thanks Capt Blaz! As to the plane, the fuselage looks a bit thin to me for a P47 Thunderbolt, hope I'm wrong. This marque should have a chunky fuselage.. Big salute as ever from London.
Love seeing ur guys content. Cannot wait to get to play with a fraction of what you guys have shown. Just got into the hobby this year and went to my first FLITEFEST. Check it out on UA-cam if you havent see it.
Beautiful job Blaz & Robert , Can not wait to hear the roar of the engine in the air. Fast fly by's please Robert. Do you guys have a remote release bomb to put under it ( with talc powder inside ) ? Hobby King used to sell them & I bought one for my spitfire but still have not tried it. Cheers from New Zealand.
OMG! Sexie and beautiful P47. Also there with Av8tore 71. Look forward to you guys every morning. Best RC reality channel ever. If it wasn't for you guys I wouldn't own my Freewing F9F Panther. Just love it and you. Thank you so much for spreading the fun and God bless you and your family.😁🤟❤
Nice Warbird plane. Capt Blaz. Do you mind using Stainless Steel wire on holding the Fuel hose instead of zip ties? Are you using a Three or Four Blade prop? She will be Awesome flying at your flight area. Still waiting on runway measurement? Thanks
Hi brothers there is one thing to watch out for is the landing gear is not very stable best to upgrade to better suspension on this P47 Thunderbolt touch of Texas cheers Rick
Hi I love your videos can you please tell me have you got any more videos on the nexa P47 Thunderbolt touch of Texas final biuld and maiden please cheers Rick
I great way to get a perfect epoxy glue joint is with rubber alcohol. You just wipe the excess Epoxy off and you get the perfect clean glue joint no matter what!
Amazing the job Captain Blaz does building and assembling gas/glow powered models. I love the tutorial videos showcasing the build as you can truly appreciate the knowledge and experience he has in his approach. Can’t wait to see this baby flying soon! Quick question. What is the CDI used for? I’m a 100% electro flyer so I have no clue!
Nice plane😘.. The "Dremel" from lidl ? I got one years ago from aldi (powercraft) and it's been a great little tool for the money... when is this baby going up then??🤤
I absolutely love you guys, if I'm having an off day I can count on you both to lift my spirits! Thank you!!
Thanks for all support my friend. I wish you one great day.
Agree!!!!
Thanks!!!!
Right on!
I'm looking forward to the Captains Maiden flight.
I cant wait my friend.
Oh yeah me too...
Beautifull Warbird, i just love the quality and the assembly by Capt.Blaz the enginedoctor..its perfect, i salute you both!
Beautiful plane and beautifully built, Capt. Blaz, there is something about a balsa model that makes it real in my eyes. l love your attention to detail, it is clear you have not only the necessary skills to build, but you also have the patients, well done. (l used toothpicks as shear pins through the hinges over 65 years ago.) Thanks for sharing. Larry, from Las Vegas Nevada, USA.
Thanks for kind words my friend!!!!
Looking great should fly and sound fantastic, well done Robert and Blaz, Jeff in LA USA
Ohhhh yeahhhh !
Someday I will buy me something like this but with a 4 stroke engine on it.
Like Captain Blaž I have as much fun assembling as flying the plane. With the assembly, taking my time with lots of coffee, I grow one with the plane and we get to learn each other.
But this P-47 will be great on the runway I’m sure. I’m impressed already!!
Salute!!!! Great tip Capt Blaz on servo orientation to conserve channels (flap servos Y Cable). Do not worry, you almost never babble!!!! We will leave that to someone else. Great Vido!!!! now go have a beer on me. Ohhhhhh wait....... beer after maiden gents!!!!! DG
Absolutely Beautiful!!! Well done...Thank you for all the extra info👏🏻👏🏻👏🏻
Same here!) I also love to assemble models) Thank you guys for your passion to that hobby!
I just love your videos because of all the good informations and also I love to listen to Pilot Roberts babbling on and on. It cheers me up to listen to you both. Im so excited to watch the maiden video of this Beautiful bird ❤ BIGGEST SALUTE from Las Vegas Nevada USA ❤
What a pleasure to see the Blaz doing his magic to a balsa plane. He makes it very interesting and informative at the same time. This will be one beautiful plane and flight and we all look forward to it. You guys are the best and inspire all of us in ways that reach far beyond the hobby of RC. For that we thank you and Salute to flyers all over the world. Russ NC/USA
This brings back so many fond memories. In the middle to late 1950s my 2 brothers and I (I'll be 77 next month) were into model aviation - .049 glow plug control line flying and rubberband free flight. It turned out that I would do most of the building and they would do most of the flying. Kind of like what you two brothers are doing.
looking forward to the next few videos of this plane.
Captain Blaz, good job. ✈👍
CPT. BLAZ YOU EXPLAINING WAS EXCELLENT...!!! Careage Driver Center
Thanks my friend. He did great job all over again.
Just happened to stop by and I'm really impressed at your build quality and attitude! Great job my friend! Take care.
That's a really clean installation Blaz.
He really enjoy to assemble planes more then flying.
Excellent video guys! Would love to see more building in the shop with Captain Blaž!
Captain Blaz very good job on that airplane can't wait for the maiden oh yeah
My favorite WWII fighter to fly in DCS!
Great job captain Blaź, nicely presented and nicely assembled !
Can I give a tip with epoxy please.....
I like the tape idea, when joining the wings !
I discovered "methelated spirits" works really well cleaning the epoxy when it's still wet.
You just wipe it off and it's perfect , no smear nothing !
Hope this helps...👍
What a well thought out build you are truly a master builder. Can't wait for this one to be in the air pilot Robert will be nervous when its time to maiden this baby. As I would knowing how much work goes into the gas planes. You will have chills and goose bumps driving to the runway good luck can't wait for this one
Yes i hope that maiden will be ok ;)) oh he can do it...
I know the P 51 was one of the best fighters but to me the lines and looks of the P 47 are so sexi.
I've always been a single child. My FAMILY HAS ALWAYS Been 40 COMMANDO/ MARINE. IM 49 Went in at 19. Served 22years full time then tried to Retire but found it hard so done another 3 YEARS part time. So NOW MY LOVE AND IF I'M HONEST SIR RC HAS SAVED MY LIFE. AND I LOVE IT TOTALLY LOVE IT. YOU TO BROTHERS ARE MY Rehab. I JUST LOVE IT WHE YOU HAVE POSTED A NEW VIDEO. I HAVE ALSO Watched EVERY VIDEO you have posted so far.I REALLY WANT TO THANK YOU BOTH FOR HELPING ME MORE THAN YOU WILL EVER KNOW. I SALUTE YOU BOTH 🇸🇮🇬🇧♥️💯👍
Such beautiful words my friend. Iam really happy that you find fun and joy here with us. This hobby is also all I have left at this moment. Iam still having problems with my hand, cant pass medical exam but goverment took all support away. I dont have a single cent of income at this point. And this after working 25 years 7 days a week for at least 12 hours a day. Iam really so dissapointed at this moment Mike. Good thing that we have at least this channel to keep my mind bussy until I resolve something with doctors. But I always hope for the best and hope good days will come back in the future. Big salute to you my friend and always feel like at home here.
@@PetrincicBrosRC YOU ARE A GREAT MAN WITH A GREAT HEART. GOOD THINGS WILL ALWAYS COME YOUR WAY SIR. P.M.A possative mental attitude. YOU HAVE GOT THAT SIR. NEVER GIVE UP 🇸🇮♥️💯👍
Fantastic ship…. Can’t wait to see this flying
Terry&ThePirates South Florida
Me too my friend.
Brilliant present for your brother captain Blaz. Sexy motor and plane 👍🏻
He loves it my friend.
Yes my glow brother this is it ;))
Beautiful build 👌 Nice work
Thankyou Capt Blaiz, i have been struggling as to were to put my engine electronins box in my zero , that will work well on my plane too,
Well done Cap'n Blaz! 👍
Hi guys can not wait to see this one to fly,so keep up all good vedios you guys make thay are fun to watch,so you guys have a very good day. Ray
I really hope for perfect maiden my friend.
Very nice plane, i can not wait until the maiden com's online, very nice assembly, he knows what he is talking about, and a real engine yes yes, a 10 from me
I cant wait to test it my friend.
Airline airline Pilot Robert airline I love when Captain Blaz try the correct your English... I can't wait for the engine to fire up video I think I would have went a lot bigger with the motor a 91 4-stroke or a twin for stroke even though it would have fit outside the cow a little bit it's better to have too much power then not enough. Special thanks and salute to your friend who gave you the plane the airline pilot huge salute from Virginia Beach USA 🇺🇸
Nice work ! Love the detail. .
Great video! Looking forward to the maiden! You know how to build 🙂
Loved this. More like this. Thanks.
Blaž is already on second project.
Awesome Brother, Awesome Plane!
Work of a Master . Dang nice ! Can't wait to see it fly , P47 was the boss in it's day ! Your friend in the U.S.
Really one amazing beast it was. Thanks for support Jerry.
What a beautiful and sexy plane! I can't wait to watch the next video showing the engine running. Do a proper break-in before the maiden.
Beautiful build Capt BLAZ 💙 I'm building a spitfire same size. I'll be going electric power system though. Beautiful job 👍👍😉👊🤘
That Thunderbolt's livery is beautiful And some very neat installation work.Salute.
Really one beautiful bird. I love it.
@@PetrincicBrosRC I have a question do you give them any more protection before you final assemble ,for example a coat of matte varnish etc?
I love this plane.
Look this is really something my brothers, this will be great to fly. I love building them to Blaz and I also love to buy all the tools and gadgets to use on them. 😍👍
Oh yeah.
Excellently built. Would love full length build videos to learn from the best
We would love to but we dont edit nothing. Maybe in the future.
Or you can come here and watch me ;))
@@elpunto231 Hahahaha I wish I could but but I am busy moving 🏠 house. Thank you 💗 so much
Captain Blaž finish the engine install and get that Jug up in the air! I can't wait to see it.
Gentlemen, you have I truly believe the most beautiful, sexuest plane ever built by the USA! I'm currently covering a Top Flight P-47 Thunderbolt. I can't wait until it's ready! Please film yours when you madien flight this season bird!. I'm so in love with it I'm building the bubble top next! Remember to always "Keep your wings in the air'! Love you both and can't wait for your maiden flight!
Look at Dis 😘. Great assembly video Capt Blaz. This Old Man on a rainy day in North Carolina enjoyed it. Pilot Robert did I here you will be doing the maiden? Always loving your videos. ✈️😎💝💝
Oh we also had rain for the last few days. But sun now again so I hope for some more maidens this week.
Captain Blaz! This assembly is amazing! Lots of thinking went into your build. Wow! That engine will really propell this big bird into the air with style! Lots of work. I cant wait for the first flight, it will be awesome! Great job, Captn. Blaz!!!
He did great job assembling this baby.
It looks awesome!
Love the work boys.
Awesome build!!!!
He is the man for the job.
Very nice work.
Salute from Oklahoma!!
Big salute back my friend.
Hello hello
YOUR A VERY CLEVER MAN BLAZ'🇸🇮 I SALUTE YOU SIR
True modeler he is.
salute from ontario canada EH
Big salute back Bob.
Beautiful build so far great job Blaz !!! I love you and Roberts passion for this hobby !!!
The best hobby in the world my friend.
Some great little tips the captain blaž
Hi brothers can I ask you if you have a video of the Nexa P47 Thunderbolt touch of Texas biuld or maiden flight cheers Rick
Great video! Great to see Blaz on the other side of the camera. Can't wait to see Robert's maiden on this baby. It should be terrific. Best to you and your families always! Big salute from Chicago! Oh yeaaah!
Finally I got him to the other side ;-)
Awsome video! Love these tips & tricks assembly videos. Got myself a H-king Tiger Moth that I plan to be my first balsa ARF.
Oh you will love that bird my friend.
Full of good information, this. Thanks Capt Blaz! As to the plane, the fuselage looks a bit thin to me for a P47 Thunderbolt, hope I'm wrong. This marque should have a chunky fuselage.. Big salute as ever from London.
Excellant job captain blaz!!! Such a beautiful assembly, and a great job zooming pilot robert! SALUTE!
Iam really lucky to have Blaž. Real modeler.
I can't wait for maiden of this 47
So so amazing hey!!!
thumbs up for the thumbnail ha, ooh it's a jug without a bubble canopy
wing looks like it's a thicc boi
Hey, I love pilot Robert's babbling, all the best fellas...
Well thanks Wayne. I really love to talk on camera.
This is great work guys. I salute you 👍
Thanks and big salute back.
Captain Blaz will be taking longer showers for a while . Thanks for the video Captains !
Ive seen a bunch of fuel plane pilots use THOSE tupe of fuel tanks. I kinda figured better, but are they glass?
Another A1 video sirs! 👍
ROBERT YOU ARE A VERY LUCKY MAN HAVING A CLEVER BROTHER WHO LOVES YOU LIKE BLAZ'. I ALSO KNOW THAT YOU LOVE BLAZ' as MUCH. ITS BEAUTIFUL 🇸🇮♥️💯👍
I really am my friend.
When r u flying this plane
Salute from ny
Big salute back from Slovenia.
And from Poland!
@@linusek1 Thanks Marcin.
Love seeing ur guys content. Cannot wait to get to play with a fraction of what you guys have shown. Just got into the hobby this year and went to my first FLITEFEST. Check it out on UA-cam if you havent see it.
Beautiful job Blaz & Robert , Can not wait to hear the roar of the engine in the air. Fast fly by's please Robert.
Do you guys have a remote release bomb to put under it ( with talc powder inside ) ? Hobby King used to sell them & I bought one for my spitfire but still have not tried it.
Cheers from New Zealand.
Does the ignition module for these gasoline planes get hot? Or just little warm? Should I not install it inside the firewall?
Oh Hell Yea!!!!!
OMG! Sexie and beautiful P47. Also there with Av8tore 71. Look forward to you guys every morning. Best RC reality channel ever. If it wasn't for you guys I wouldn't own my Freewing F9F Panther. Just love it and you. Thank you so much for spreading the fun and God bless you and your family.😁🤟❤
Oh that bird is really beautiful. I hope you are having great time with it. Big salute from Slovenia.
Hi is there another video on this model maiden flight cheers Rick
Nice Warbird plane. Capt Blaz. Do you mind using Stainless Steel wire on holding the Fuel hose instead of zip ties? Are you using a Three or Four Blade prop? She will be Awesome flying at your flight area. Still waiting on runway measurement? Thanks
Wow, this plane is almost too nice to fly. I think I would hang it up in my garage to look at ..lol...Nice Plane......SALUTE!
Its really sexi my friend.
A quick note the One Flap started first before the other! Not Sync'd! It may cause a problem when flying??
Maybe bocouse of servo tester..
Hi brothers there is one thing to watch out for is the landing gear is not very stable best to upgrade to better suspension on this P47 Thunderbolt touch of Texas cheers Rick
Have you made flight with this plane? Is there a video of maiden flight?
Not yet.
@@PetrincicBrosRC If you will find time, this would be a good one.
Never rush a good job Blaz only three years wait lol
Bwahahahhaah
Hi I love your videos can you please tell me have you got any more videos on the nexa P47 Thunderbolt touch of Texas final biuld and maiden please cheers Rick
Its almoust ready for maiden flight.
@@PetrincicBrosRC thanks love to see her finished and the maiden flight. I just bought one and can not wait for the build cheers Rick
How did this plane end up flying with the 10cc motor?
Its almoust ready for maiden flight.
I great way to get a perfect epoxy glue joint is with rubber alcohol. You just wipe the excess Epoxy off and you get the perfect clean glue joint no matter what!
Great idea my friend.
Parkside Tools 💪
They work perfect.
👍
Thanks F.
Difficult to see in the video. Make sure the engine is angled DOWN and RIGHT. P-47 flies great. I have 5 of them in different sizes and powerplants.
🇺🇸🇺🇸😁😁👍🏼👍🏼
Hello very good, but I think the engine is too weak for this size better worth a .91 4-stroke or a 20cc gasoline
We will see. I hope it will be OK. I have 8cc petrfol engine on 1.4m Mustang and its perfect.
Amazing the job Captain Blaz does building and assembling gas/glow powered models. I love the tutorial videos showcasing the build as you can truly appreciate the knowledge and experience he has in his approach. Can’t wait to see this baby flying soon!
Quick question. What is the CDI used for? I’m a 100% electro flyer so I have no clue!
Blaž is really balsa and glow engine master. CDI unit is for spark becouse this is petrol engine.
Thanks for kind words my friend!!!
Nice plane😘.. The "Dremel" from lidl ? I got one years ago from aldi (powercraft) and it's been a great little tool for the money... when is this baby going up then??🤤
Oh yeahh this one is 4 yesrs old and it works perfect...
4 stroke would have been better
This looks like a ESM plane