Good luck finding parts for it, I have the same car also from years ago just collecting dust because I cant find the chain for it anymore, you can only take out so many links in the chain befor it cant work anymore. I even tried contacting Kyosho them selfs with no prevail...good luck!
kobako31 GOOD JOB , PLEASE WOULD YOU TELL ME WHERE TO FIND THAT RED SPECIAL CLEANER/DEGREASER OR ANY EQUIVALENT CLEANER YOU USED TO RESTORE THIS LANDJUMP ?? THANK YOU ..
Yes I have restored 5 of these, the engine bearings have always been rusty as nitro fuel been left in the engine, even after one run if you do not but after run in the engine it will be toast in a year or so, so 30 years sitting in there will kill the bearings. If you run a motor like this the chrome comes off the bearings goes up the piston and liner and that is the end of the engine !! You can save the engine by just changing the bearings, bet this motor only run the once.
Hello, Thank you for your comment. Receiver of the LAND JUMP is not totally control. So it is very old. However, the challenge second time,(1:55) I was able to control !
the old race engine 3,5 ccm navarosi,..nova rossi,..very god engine,..if u want ent have enaf space,..in ur land jump,..u put a 5 ccm big engine inside with 4 hp,..after the car by a rocket
Hi! Thank you for your comment. I had get My LANDJAMP at auction. It had all parts completely. Please check my blog. You can search my blog by "RCBLOG kobako". Thank you!
Hey umm...I have the exact RC as yours, its been sitting in our house for many years now. Problem is it doesn't work, its missing lots of parts. Can you send me your email address so I can ask some questions on where to start?
hallo,.. i have my 3,5 ccm nitro engine oredy modivid!,..end tune up wiht my air system fiter,..if u watch my video reely r21,..u luk only the grenn flor,..becose the angine runing,..u can no si it olny the grenn flor go dirty,..fom nitro feul,..watch it ,..
I'm sorry I do not know how to send an email address to you. Please look at my blog. Address is "sohmioaa.blog.shinobi.jp" And, you can be found by "RCBLOG kobako" . Please comment on the blog. Thank you.
u dont know ur engine,s,...i luk at ebay,..4,5 ccm ,...5,5 ccm,..,.for rc car,..big block engine the say 4 or 4,5 hp,...i dont know it the true?,..abaut 45.000 per min end more?????,....my engine 3,5 ccm realy engine 33.000 per min end 1,9 hp,..?
Thank you!
restore very nice,...
for 25Years it was my first Rc-Buggy for this time it was the best 4WD RC-Buggy everr
very very cool!
Nice resto, looks at home on the dirt, fantastic cars !
I have a blue one I’m getting ready to restore all I need for it is shocks and some screws for the role cage
Woah
wow nice work!
I love this car's noisy sound (specially from belt :D )
Thank you for your comment.
Yes,
The condition of the kit was very good in spite of 30 years ago.
I respect that it is stored in good condition.
What a legendary design. If I had one of these and a gold pan a-stamp rc 10 I would die a happy man.
@Blacklamass that bit shocked me too, i had to rewind to check and yes wire brushed bearings unbelievable….!!!!
Cool! Looks like it ran away a few times 😅🤟
Good luck finding parts for it, I have the same car also from years ago just collecting dust because I cant find the chain for it anymore, you can only take out so many links in the chain befor it cant work anymore. I even tried contacting Kyosho them selfs with no prevail...good luck!
Great car!! It seems to eb out of control all the time though, can't it just sit and idle?
@claptoned0
Thank you!
RC BLOG kobako
kobako31 GOOD JOB , PLEASE WOULD YOU TELL ME WHERE TO FIND THAT RED SPECIAL CLEANER/DEGREASER OR ANY EQUIVALENT CLEANER YOU USED TO RESTORE THIS LANDJUMP ?? THANK YOU ..
Hello, I have the first version of the kart 10 NR 4939. NIB for sale.
Yes I have restored 5 of these, the engine bearings have always been rusty as nitro fuel been left in the engine, even after one run if you do not but after run in the engine it will be toast in a year or so, so 30 years sitting in there will kill the bearings. If you run a motor like this the chrome comes off the bearings goes up the piston and liner and that is the end of the engine !! You can save the engine by just changing the bearings, bet this motor only run the once.
Cant believe you put those bearings back in the engine.
hy,..i know the land jump,..20 jeahrs,.ago i hafe one with 3,5 ccm navarosi race engine,..very powerfol,...i luk ur video now,..
where can i get parts for a bluebird athena
Hi,
Did not break
It was only slightly scratched.
I ran it with a new receiver.
Hi,
LAND JUMP is nice old buggy.
With the 3.5Nova Rossi engine ??
It would have been amazing power...
Hi,thank you for your comment.
Please search my blog.
You can search "RCBLOG kobako".
Wheel is painted.
Hello, Thank you for your comment.
Receiver of the LAND JUMP is not totally control.
So it is very old.
However, the challenge second time,(1:55)
I was able to control !
Hi, how did you clean that alloy ? Wheals also are alloy ?
the old race engine 3,5 ccm navarosi,..nova rossi,..very god engine,..if u want ent have enaf space,..in ur land jump,..u put a 5 ccm big engine inside with 4 hp,..after the car by a rocket
brick jump!
Hi!
Thank you for your comment.
I had get My LANDJAMP at auction.
It had all parts completely.
Please check my blog.
You can search my blog by "RCBLOG kobako".
Thank you!
kobako31
Hi,
thank you for your comment.
I'm doing a blog
Please try to search in RCBLOG kobako.
i got a brand new unused landjump 4d in original box
i think selling it for the highest bid
cjocd did you ever sell it ?
5ccm??
and 4hp!!
It is the same as the four horse power...
Landjump? more like curb stone jump! lol but very nice work all the same, nice to see it being used and abused, no good sitting on a shelf now (:
Stop driving it! That is first class work making it look new. It should be on display somewhere. (my house would be a good place)
じゃじゃ馬
If people would take care and maintain their shit there would be no reason to restore a goddamn thing.
Hey umm...I have the exact RC as yours, its been sitting in our house for many years now. Problem is it doesn't work, its missing lots of parts. Can you send me your email address so I can ask some questions on where to start?
hallo,.. i have my 3,5 ccm nitro engine oredy modivid!,..end tune up wiht my air system fiter,..if u watch my video reely r21,..u luk only the grenn flor,..becose the angine runing,..u can no si it olny the grenn flor go dirty,..fom nitro feul,..watch it ,..
I'm sorry
I do not know how to send an email address to you.
Please look at my blog.
Address is "sohmioaa.blog.shinobi.jp"
And, you can be found by "RCBLOG kobako" .
Please comment on the blog.
Thank you.
I couldn't hear a fricking thing because of the f***ing music! i hate when they put music to a motor/engine video clip. Sorry for my bad mood.
Cheers!
u dont know ur engine,s,...i luk at ebay,..4,5 ccm ,...5,5 ccm,..,.for rc car,..big block engine the say 4 or 4,5 hp,...i dont know it the true?,..abaut 45.000 per min end more?????,....my engine 3,5 ccm realy engine 33.000 per min end 1,9 hp,..?
音楽が邪魔です
エンジン音が聞きたいのに何故こういう無駄な演出をするんでしょうか
うみっこらんど 編集は人それぞれだろエンジン音聞きたいなら他の動画見てこい