Hi, I am using MAG520 the issue I am having is when I switch network to mobile hotspots I get a error saying " E32 Your STB is not compatible with this portal " I think it thinks that I am making 2 separate connections with two different IPs hence I always need to contact the service provider to reboot me from their end. No idea what's wrong with it. Any thoughts or workaround would be greatly appreciated.
I Know. Sorry about that. But Please watch the hole video next time. Did you get the portal back? If not tell me what IPTV server you where using and I will give you the portal.
Hi will this fix the red light problem on the mag box 322 liked video straight forward easy to follow but will have to member about portal address cheers
There is 2 thing you can try. Try this one first that's on the video, but make sure you take down your portal URL or take a picture of it. And disable the auto update.
What do I put as the server url and others to get TV channels? My TV doesn't recognize the box (tried on 2 different TV's) and I have to factory reset it so it'll hopefully fix the issue. I also get a red light, which is not good.
Hi please reply i have lost a Portal URL after resetting the MAG 424w3 to factory settings, anyway of recovering please? And I don't have contact of seller or the iptv provider.
Hi Jason....I have a mag254 that reboots every day on it's own. My provider says it shouldn't happen and thought could be their servers since I have a lot of freezing and looping every so often also. Why did you disable the autoupdate? I see mine is enabled. Could that be my problem? I am sking before I do the reset in case as I am not techy and afraid I break it. 😫
Hi. I have autoupdate turned off because informir sent an update to block some servers. Your box rebooting could be a couple of this. Did you try factory resetting your box? I would start there first. ua-cam.com/video/NlYVKn_2BAg/v-deo.html
@@JasonTech Thank you...I found that specific video after I msged u on here and saved it. I didn't do the factory reset yet coz I wanted to check about the autoupdate before proceeding. I will do it tomorrow once I sum up the courage coz I'm not techy and nervous about it. Wish me luck!! Thank u again for the quick response...much appreciated and happy long wkend over there!!! 🙏
Just don't forget to take down the server portal BEFORE factory resetting your box. If you run into any problems (you won't) just let me know. Have a great weekend too!
Hello Jason! Listen how's the situation. I got a free iptv test from a provider and I used his Portal. After that, because I didn't like the Portal I decided to return back to my previous provider. I don't know how and why, but although am changing the Portal on my mag 420 settings, that stupid portal is there on the place of my current provider. So I followed your instructions for a factory reset but that useless portal is on its place again replacing my current provider and because of that the channels cannot Play! What can I do?
Hi. First thing do you have your old URL? You shouldn’t have to to a factory reset unless you made other changes. With the mag420 to do a factory reset unplug the box from the back. Hold down the menu button and don’t let go and plug the power it back in. You will get the main menu with the factory reset option.
@@JasonTech of course I have it, it appears by it self all the time out of nowhere on the portal settings. I have done also that reset you describe and again nothing changed
@@culturalorganizationarogos4628 Sorry I never ran into that problem. The only thing I can think of is trying to do it with the internet/WiFi disconnected.
Hi Jason. I used to have a some settings which let the program run continuously episode by episode. Byt now once the episode is finished it goes back to the main screen. Can you help with that setting? Thanks
And I have one more issue. I cannot turn on my box with remote. When I click on the red power button to on only the blue power button blinks and it never starts so I have to take my plug off and then plug on then it reboots and open. How can I fix that? Thanks
Hi bud , ive reset to factory settings , when i try to restart portal, it comes up "loading" then the screen turns to black, ive done everything youve said and also updated software but still the portal ownt open, any tips
@@JasonTech yes, ive entered my providers detals, i press restart portal, it says the word "loading" and what usualy happened was a small loading bar would appear, then load really fast, then id be on my menu with my channels, but now that bar doesnt appear and it goes to black and stays like that. thanks for getting back to me
Hi mag 420 says firmware , I've spoke to my friend that runs the service and he is baffled and yes my Mac address is on there correctly, only suggestion he had was to get some custom firmware? Any ideas would be great 👍
I see that also MAG 420 have this firmware issue I have MAG 424W3 and it seems that Infomir screwed up with their firmware update I'm not able to see my own M3U8 Link!
Question a Mag that says Your STB is blocked call the provider and the subscription is expired how to renew if one doesn't have the email account because it was purchased from someone else?
It doesn't matter, you can purchase a new subscription from anyone. If you want to change the Portal check out my other video. ua-cam.com/video/fplntT1nP1o/v-deo.html
@@JasonTechhi Jason I have a MAG and my brother was paying $35 a year I think for the service and he passed away and didn't tell me how to get it and now I don't have any service can you help me or give me the way to pay for the service thank you so much
@@JasonTech I don't have problem I fix it with your help.....but when strart mag now I have blue screen and dont looking the logo for (IN INFORMIR) I don understand that.
@@JasonTech umm, so this (I think) is happening to my box as well. I did the reset in the video and everytime the box powers up now I get no infomir spashscreen but just a blue screen that goes though a sequence almost like it did when I reset it. The sequence is "mounting rootfs" then "switching to rootfs" then "starting kernel event manager" then "starting network interfaces". The last quote also has a green loading bar on the very bottom of the screen. When the green bar loads its says "starting application" then it goes black then starts the portal.
how much internet data would i need if i use iptv? will 300gb be enough? please let me know as i dont know how much gb would be sufficient to watch on iptv
I would try to get unlimited. Keep in mind your laptops your cell phones Smart home devices. It all uses Internet, I know if 300gb is enough. I would ask your Internet service provider how much Internet did you use last month.
@@JasonTech let me put it this way. lets say i watch HD channel for an hour... how much data i would need to watch a HD channel for an hour and how much data i would need to watch a SD channel for an hour? could u help?
Hi Jason I have a mag 322 but the wrong power cable was inserted and blew the power and it wont turn back on even with the original power cable would you possibly know if it is repairable ? or has the whole fuse board blew
hello friend, I'm watching your video, I have a Mag 322, some operator locked it, I did the same as you in the video and put it to factory settings, but there is no server to enter the portal, can you please help me, what do I need, or should I throw the box away
@@JasonTechI have a list, I can play everything, but the box is locked by someone, I can't go to the portal to enter the code to connect, everything is thrown out, I tried to factory settings, but it doesn't help
@@JasonTech i had no portal option in settings and now after factory reset there is portal option again! But now i have the problem that everytime i start the Box the blue screen is disappearing like i would do factory reset and it takes very long to get the box started after long time waiting on the black screen.
Unplug your box then hold the menu button down on the remote and don't let go. Then plug the box back up, once you get a menu screen come up. let go the menu button. Now check all the setting
No rebooting won't. Factory restarting yes, you will have to re-enter the portal url. So before you factory restart your box, write down your portal so you can enter it after the restart.
No this won't fix that. Missing file is to do with the IPTV server. You need to contact your provider. But if you want to try something? someone sent me a comment on this. They said they keeps trying to watch the movie after the 3rd attempt, the movie worked.
The only way that I know of is to use the unblock firmware to get that back. See here. ua-cam.com/video/fJzuZTVKD6I/v-deo.html Go here to download the firmware. jasonchannel.com/mag-box
Hiya mate my magbox322 loading bar goes half way and then it freezes. I can't get to settings with the remote as it doesn't allow me. Can u help me plz
It sounds like your IPTV server might be down. If you need to get into setting. Reboot your box when you see loading profile hit the menu button and it will take you to setting.
hello, when i press f1 to download the update, at the "update status" it shows me the message "Wrong singature" with red words and the update never starts. Why this happening; Thank you!
@@JasonTech thanks I deed it. sorry, 1 more questions if you don't mind. I use to watch serial movies and I can't forward to the next episode going back to the same episode that I watched how can I fix it. thank you
How to find the files for Usb? One link please! My mag is locked and i cant see 'portals' in the 'servers'.. I have to fix this with Usb.. Please help me!
@JasonTech I seen that video and i followed it but no blue screen. I just get the message at the bottom of the screen saying press menu button for the menu
Question: Why do you want to factory reset your box? You might not be doing it right. - Unplug the box - Hold the menu button down and don't let go. - plug the box back in and make sure you are holding the button down in front of the Mag box. - When you see the blue screen then let go of the button. If you don't see the blue screen, then you might have problem with your box.
I'll follow those instructions u gave me. Thanks. I want to factory reset it cause when I watch IPTV on it, it keeps on rebooting. It might'nt work, but anything worth a shot
Everytime I start the box i'm on a blue login screen with a "Ruije" logo and a button that says login, however you cannot get of the acreen which is really frustrating
@@JasonTech i tried it..but nothing appear..i don't know i let go the button and i push it again..but nothing happened...my mag box work and when i change the channel is going to freeze...and i shutdown and restart again...but is not good in this mode..we don't see anything ...thanks for your answer
@@JasonTech Hi..its me again..i bought the subscription on aliexpress..for 1 year was good..sometimes i have the litle problem..but worked..i have 1 week i dont see anything...because when i change the channels everything freeze..i see the link you have sent me ...and i think its true...thanks
I reset my mag 322 as instructed, but when I went from servers it showed only general, clicked on general and got a channel saying Ntp server, could not progress any further, could not get a portal page
my box keeps going to DHCP even after setting to NAND AND SAVING.I now see nand and NAND2 ILL TRY 2. this is y i only use android boxes. this was given to me to try and fix.. still same error issue. dhcp wants to load but error..
I did the reset twice but for some reason it gets stuck on screen after I restart the device, screen where it's showing like it's powering up but then doesn't reach the end!!!! Wish I can share pic
Hi. That means you just have the first generation box. What you do is unplug your box. Hold the menu button down on the remote and don’t let go. Plug your box back in. Keep pointing the remote to your box and you should get a blue menu screen. Then head down to reset box.
Hi. If you are having problems with only 1 channel. The problem is with the server not the box. Contact your provider and tell him the channel your having problems with.
It's starts at 0, try 2 and move up from there. Keep in mind the high you go the longer the channel change will take. I will a video on this if you want?
I have forgot the parental control code. Can anyone tell me how to reset that also I have done a complete reset the box maybe it’s gone on factory settings I have tried 0000, 8080 and 7247 but it’s not working. Can anyone help me plz.
Siempre es mejor encontrar una persona local, pero si no tienes a nadie cerca. Escriba proveedor de IPTV en su navegador y obtendrá una lista de ellos. Cuando encuentre uno con el que quiera ir, comience con una prueba de 48 horas antes de comprar cualquier mes. Incluso puede obtenerlo en Amazon amzn.to/3tuBdY
Have a mag 322 with a vpn back up box but for some reason it’s showing disabled on the WiFi but the Ethernet is enabled ..... can’t get into anything ..... any ideas anyone
@@JasonTech hello I have sussed the disabled internet bit now, so all is showing enabled now . It just will not load in even with these all enabled just waiting for network keeps showing . Think the url maybe a problem?? It wasn’t before and never changed it
Hi. Just type your server portal back onto the box and everything will be back up. Do you know the name of the IPTV Server you where using? ua-cam.com/video/fplntT1nP1o/v-deo.html
Unplug your box and hold down the menu button and plug your box back in. Once you get the menu up, go to TV setting and make sure it's on NTSC. If you are in euro make sure it's on PAL.
This is actual sabotage not telling you to make sure you Memorize or screen shot the Portal info and password before following his directions... that you willl need them later. Jason, you could VERY easily do a subtitle over the beginning steps to tell people this. Guess I'm just going to return this stupid device to the store.
Thank you Jason!!
You're welcome
Excellent, clear and precise. Thanks so much.
You're very welcome!
Thanks for making this video help me sort out my mag box
Hi Paul. You’re welcome!
Excellent, clear and to the point video
Much appreciated!
Thanks very much for the Video. The factory reset actually fixed the dreaded 'Resolution not supported' error on my mag 322.
You're Welcome, glad it helped.
@@JasonTech Is this method of doing a factory reset better than going through the settings and using the remote control. Any difference?
You are the best , you helped me very much . Thank you
You're welcome
Hi, I am using MAG520 the issue I am having is when I switch network to mobile hotspots I get a error saying " E32 Your STB is not compatible with this portal " I think it thinks that I am making 2 separate connections with two different IPs hence I always need to contact the service provider to reboot me from their end.
No idea what's wrong with it. Any thoughts or workaround would be greatly appreciated.
Thanks for telling me about the portal after i have erased it
I Know. Sorry about that. But Please watch the hole video next time. Did you get the portal back? If not tell me what IPTV server you where using and I will give you the portal.
@@JasonTech Hi Jason I lost my portal too.
I have mag324w.
@@gurmindersingh6180 Hi Gurminder. What server where you using? If you don’t know it, you will need to contact your service provider for it.
@@JasonTech how do I find my iptv server
Hi will this fix the red light problem on the mag box 322 liked video straight forward easy to follow but will have to member about portal address cheers
There is 2 thing you can try. Try this one first that's on the video, but make sure you take down your portal URL or take a picture of it. And disable the auto update.
😊😊😊😊
This video helped a great deal, god bless
Great instructions. Just saving the portal part should have been told in the beginning 😢
Sorry about that, this was one of my first video request.
It works, thank you so much
You're welcome!
What do I put as the server url and others to get TV channels? My TV doesn't recognize the box (tried on 2 different TV's) and I have to factory reset it so it'll hopefully fix the issue. I also get a red light, which is not good.
You need to find a IPTV provider and they will give you the URL. Try this ua-cam.com/video/EHTqqQpXcls/v-deo.html
Hi Jason, the sound for movies and Tv Series is not working but sound working fine on all live tv, is there a simple fix for this?
That's a server problem, you need to contact your provider
Hi please reply i have lost a Portal URL after resetting the MAG 424w3 to factory settings, anyway of recovering please? And I don't have contact of seller or the iptv provider.
Great tutorial, thanks!
Hi Luis. You're welcome!
What does rebooting do? I'm having trouble with my 322w1 MAG BOX. Freezing up, skipping, do you think rebooting helps this.
Thanks,
Is your box on Wifi or is it Hardwire? What server are you using?
@@JasonTech Jason my BOX is on WI-FI. I don't know where the server is.
Hi Jason....I have a mag254 that reboots every day on it's own. My provider says it shouldn't happen and thought could be their servers since I have a lot of freezing and looping every so often also.
Why did you disable the autoupdate? I see mine is enabled. Could that be my problem? I am sking before I do the reset in case as I am not techy and afraid I break it. 😫
Hi. I have autoupdate turned off because informir sent an update to block some servers. Your box rebooting could be a couple of this. Did you try factory resetting your box? I would start there first. ua-cam.com/video/NlYVKn_2BAg/v-deo.html
@@JasonTech Thank you...I found that specific video after I msged u on here and saved it. I didn't do the factory reset yet coz I wanted to check about the autoupdate before proceeding. I will do it tomorrow once I sum up the courage coz I'm not techy and nervous about it. Wish me luck!!
Thank u again for the quick response...much appreciated and happy long wkend over there!!! 🙏
Just don't forget to take down the server portal BEFORE factory resetting your box. If you run into any problems (you won't) just let me know.
Have a great weekend too!
Thanks a lot
You're welcome
Imagine telling that you need to memorize the url portal at the end of the video...wow thanks a lot mate
Hello Jason! Listen how's the situation.
I got a free iptv test from a provider and I used his Portal. After that, because I didn't like the Portal I decided to return back to my previous provider.
I don't know how and why, but although am changing the Portal on my mag 420 settings, that stupid portal is there on the place of my current provider.
So I followed your instructions for a factory reset but that useless portal is on its place again replacing my current provider and because of that the channels cannot Play! What can I do?
Hi. First thing do you have your old URL?
You shouldn’t have to to a factory reset unless you made other changes. With the mag420 to do a factory reset unplug the box from the back.
Hold down the menu button and don’t let go and plug the power it back in. You will get the main menu with the factory reset option.
@@JasonTech of course I have it, it appears by it self all the time out of nowhere on the portal settings.
I have done also that reset you describe and again nothing changed
So in few words I cannot change the portal url, although am putting other urls it's keep coming back.
@@culturalorganizationarogos4628 Sorry I never ran into that problem. The only thing I can think of is trying to do it with the internet/WiFi disconnected.
Have you tried this. ua-cam.com/video/fplntT1nP1o/v-deo.html
Hi Jason. I used to have a some settings which let the program run continuously episode by episode. Byt now once the episode is finished it goes back to the main screen. Can you help with that setting? Thanks
There's a setting for auto play. What box do you have?
Mag254
And I have one more issue. I cannot turn on my box with remote. When I click on the red power button to on only the blue power button blinks and it never starts so I have to take my plug off and then plug on then it reboots and open. How can I fix that? Thanks
I have never ran into that problem. Do you have another remote to see if it does the same thing? Do you get a new TV by chance?
@@JasonTech I did change the remote too. I had the same issue with my old remote. But it didn't change.
Hi bud , ive reset to factory settings , when i try to restart portal, it comes up "loading" then the screen turns to black, ive done everything youve said and also updated software but still the portal ownt open, any tips
can you get to the URL portal?
@@JasonTech yes, ive entered my providers detals, i press restart portal, it says the word "loading" and what usualy happened was a small loading bar would appear, then load really fast, then id be on my menu with my channels, but now that bar doesnt appear and it goes to black and stays like that. thanks for getting back to me
It sound like there's a problem with the portal url.
@JasonTech thanks for getting back , I believe it's something to do with the provider, thanks
Hi mag 420 says firmware , I've spoke to my friend that runs the service and he is baffled and yes my Mac address is on there correctly, only suggestion he had was to get some custom firmware? Any ideas would be great 👍
I see that also MAG 420 have this firmware issue I have MAG 424W3 and it seems that Infomir screwed up with their firmware update I'm not able to see my own M3U8 Link!
Question a Mag that says Your STB is blocked call the provider and the subscription is expired how to renew if one doesn't have the email account because it was purchased from someone else?
It doesn't matter, you can purchase a new subscription from anyone. If you want to change the Portal check out my other video.
ua-cam.com/video/fplntT1nP1o/v-deo.html
Superb fix, top notch. Thank you!
Glad it helped!
@@JasonTechhi Jason I have a MAG and my brother was paying $35 a year I think for the service and he passed away and didn't tell me how to get it and now I don't have any service can you help me or give me the way to pay for the service thank you so much
Mag 322 it's working my friend.
Plz people DON'T UPDATE ITS RONG.
What Problem are you having
@@JasonTech
I don't have problem I fix it with your help.....but
when strart mag now I have blue screen and dont looking the logo for
(IN INFORMIR) I don understand that.
Sorry I never got that problem. But that might be a good thing, your box might never get blocked.
@@JasonTech umm, so this (I think) is happening to my box as well. I did the reset in the video and everytime the box powers up now I get no infomir spashscreen but just a blue screen that goes though a sequence almost like it did when I reset it. The sequence is "mounting rootfs" then "switching to rootfs" then "starting kernel event manager" then "starting network interfaces". The last quote also has a green loading bar on the very bottom of the screen. When the green bar loads its says "starting application" then it goes black then starts the portal.
My mag box 322 is stuck in loading…the yellow bar is stuck….can this be fixed or is the box dead?
No, That's a problem with the server.
how much internet data would i need if i use iptv? will 300gb be enough? please let me know as i dont know how much gb would be sufficient to watch on iptv
I would try to get unlimited. Keep in mind your laptops your cell phones Smart home devices. It all uses Internet, I know if 300gb is enough. I would ask your Internet service provider how much Internet did you use last month.
@@JasonTech let me put it this way. lets say i watch HD channel for an hour... how much data i would need to watch a HD channel for an hour and how much data i would need to watch a SD channel for an hour? could u help?
Then 300GB will be fine.
Hi Jason
I have a mag 322 but the wrong power cable was inserted and blew the power and it wont turn back on even with the original power cable
would you possibly know if it is repairable ? or has the whole fuse board blew
Hi Glen, it sounds like the board is blown. I don't think it's worth fixing. If you decide to get a new one, I would get Mag 324.
fooked mate
HI JASON DO YOU KNOW WHERE I CAN GET A MAG 322/323 BOX REPAIRED
hello friend, I'm watching your video, I have a Mag 322, some operator locked it, I did the same as you in the video and put it to factory settings, but there is no server to enter the portal, can you please help me, what do I need, or should I throw the box away
I'm not sure what you mean. Do you have an iptv subscription? or are you missing the portal option on the box, so you can't enter your portal?
@@JasonTechI have a list, I can play everything, but the box is locked by someone, I can't go to the portal to enter the code to connect, everything is thrown out, I tried to factory settings, but it doesn't help
If you can't get into the portal section, then there's not much you can do.
Hi I need to know my portal could you please help ? Thanks
You have to go to setting then portals
thank you very much you are the best
You're welcome!
@@JasonTech i had no portal option in settings and now after factory reset there is portal option again! But now i have the problem that everytime i start the Box the blue screen is disappearing like i would do factory reset and it takes very long to get the box started after long time waiting on the black screen.
What model do you have?
@@JasonTech mag322
Unplug your box then hold the menu button down on the remote and don't let go. Then plug the box back up, once you get a menu screen come up. let go the menu button. Now check all the setting
Does rebooting will end my subscription? Do i have to again call the operator
No rebooting won't. Factory restarting yes, you will have to re-enter the portal url. So before you factory restart your box, write down your portal so you can enter it after the restart.
Dose it fix missing file error. I click on to watch movies or anything else I keep getting missing files error.
No this won't fix that. Missing file is to do with the IPTV server. You need to contact your provider.
But if you want to try something? someone sent me a comment on this. They said they keeps trying to watch the movie after the 3rd attempt, the movie worked.
I was getting the black screen and this fixed it. Prob caused by software update
there is no button for factory reset for the 324...how do i reset the 324?
tx
Can you show us how to factory reset on MAG 250 model?
Can I use any remote brand on that devices
As long as it's a universal remote.
I had two original ones and they both burnt out so I wanted to see If I can get the universal one to work but I don't know how to get a code for it
Can you make a tutorial what to do when you forgot your parental control please. I did a reset and all, but nothing seem to work. Thanks in advance ✌🏽
Hi Manisha. I will do one for you and try to post it this week.
Please help. I have a Mag 322. But there is no Portal option. There is obly general and more. What can I do?
The only way that I know of is to use the unblock firmware to get that back. See here. ua-cam.com/video/fJzuZTVKD6I/v-deo.html
Go here to download the firmware. jasonchannel.com/mag-box
I dont know about my portal information how I can get that or where I can find on my tv
You get the portal info from your provider. They have to give it to you.
Hiya mate my magbox322 loading bar goes half way and then it freezes. I can't get to settings with the remote as it doesn't allow me. Can u help me plz
It sounds like your IPTV server might be down. If you need to get into setting. Reboot your box when you see loading profile hit the menu button and it will take you to setting.
Can you enable subtitles on the Mag 524w3?
Hi. It depends on subscription, Try this. ua-cam.com/video/KUCSq5wukmY/v-deo.html
HI I tried this method, but after save and exit , it remains on blue screen of loading , there is no loading word as well. i have 254 box
For the Mag254 see here. ua-cam.com/video/x8GkICu77Rs/v-deo.htmlsi=_hEK_gP-X39xHTxS
Hi can you help me please my mag is stuck on a black screen saying loading? Thanks
hello, when i press f1 to download the update, at the "update status" it shows me the message "Wrong singature" with red words and the update never starts. Why this happening;
Thank you!
Hi. What model of box are you using?
please can you tell me where can i found the URL number. thanks
On your box? Go to part 3:28 in this video.
@@JasonTech thanks I deed it. sorry, 1 more questions if you don't mind. I use to watch serial movies and I can't forward to the next episode going back to the same episode that I watched how can I fix it. thank you
That's something to do with your IPTV server. Try contacting your provider and ask them if they can add that feature back.
Hi Jason
My mistake I had clear the data of Mag322W1 ... can I upgrade the Firmware software... sir you are in Toronto?
Hi Ashish. Don't do a firmware upgrade. What problem are you having? Yes, I'm from Toronto.
@@JasonTech can I bring my box to U... if you can fix my box ... Or leave Me way where I can send you pictures of screen
Thanks
Hi I live in Canada BC what would be my area portal URL
Hi. You get the URL from your IPTV provider.
How to find the files for Usb? One link please! My mag is locked and i cant see 'portals' in the 'servers'.. I have to fix this with Usb.. Please help me!
Hi. Try factory resetting it. ua-cam.com/video/gMTUJTwqw_U/v-deo.html
Hi,did the reset but still getting ‘signature errors’ when trying to update to factory firmware
Hi. You might have to use the no block firmware. ua-cam.com/video/fJzuZTVKD6I/v-deo.html
Do you know how to reset a MAG256 to Factory settings?
Yes see here. ua-cam.com/video/x8GkICu77Rs/v-deo.htmlsi=Ayuqg2q3WS_xX7qJ
@JasonTech I seen that video and i followed it but no blue screen. I just get the message at the bottom of the screen saying press menu button for the menu
Question: Why do you want to factory reset your box?
You might not be doing it right.
- Unplug the box
- Hold the menu button down and don't let go.
- plug the box back in and make sure you are holding the button down in front of the Mag box.
- When you see the blue screen then let go of the button.
If you don't see the blue screen, then you might have problem with your box.
I'll follow those instructions u gave me. Thanks.
I want to factory reset it cause when I watch IPTV on it, it keeps on rebooting. It might'nt work, but anything worth a shot
Did it work?
Everytime I start the box i'm on a blue login screen with a "Ruije" logo and a button that says login, however you cannot get of the acreen which is really frustrating
Hi I tried this setting its not getting fixed its showing me blue screen again and again with message mounting rootfs. Switching to rootfs please help
Hi. To fix your problem, Try this ua-cam.com/video/fJzuZTVKD6I/v-deo.html
Hi did the reset but I still don't have a portal to get in to, to add my URL is there a way to get the portal back please
Hi Roy. If the factory reset didn't work, did you try a software update?
@@JasonTech no I've been told it's locked, so I've given up on it, but thanks for replying
No, it will still work. just don't use the old server, use a different URL. Try the no block firmware.
ua-cam.com/video/fJzuZTVKD6I/v-deo.html
Hi...is for mag 256?
Hi. Yes it’s the same steps but to factory reset the mag256. You let go the button when it flashes red.
@@JasonTech i tried it..but nothing appear..i don't know i let go the button and i push it again..but nothing happened...my mag box work and when i change the channel is going to freeze...and i shutdown and restart again...but is not good in this mode..we don't see anything ...thanks for your answer
It might be the server you are using. See here www.infomir.us/products/mag256.html
@@JasonTech thanks again...
@@JasonTech Hi..its me again..i bought the subscription on aliexpress..for 1 year was good..sometimes i have the litle problem..but worked..i have 1 week i dont see anything...because when i change the channels everything freeze..i see the link you have sent me ...and i think its true...thanks
Can you tell me what to do when IPTV factory has been reset and it asks for password but you don't know it ?
There is no password, you just need to add the portal URL. If you don't have it, you have to contact your IPTV provider for it.
@@JasonTech thank you
I will look for it
Can you tell me the name of tour provider, it seems exactly what i need.
Hi Nikola. I'm not sure what you are asking for.
Never mind, i found it.
@@JasonTech can you help me please qith STB blocked call the provider thing.. Please i wanna delete that... please!
Hello, good morning, how can I activate my mag254 infomir?
If we didn’t save the portal - how do we find it after the fact ?!!
You have to ask your provider for it again.
I reset my mag 322 as instructed, but when I went from servers it showed only general, clicked on general and got a channel saying
Ntp server, could not progress any further, could not get a portal page
In NTP server: Type pool.ntp.org
can yoiu help me please? I do everything but still get "STB blocked call the provider" I wanna delete that help me! please.
Hi. The URL that you are using is blocked Try a different IPTV server (URL). The box is fine it's just the URL in system setting under portal
How can I find the server portal?
You get that from your iptv provider.
I hv question regarding youtube . UA-cam not working on my iptv box mag322. App open but nothing happens
That's something to do with the IPTV Service.
can u tell me y im getting waiting on network setup message on mag 322 thanks
Hi. Are you using Wifi or hardwire?
@@JasonTech hardwired
my box keeps going to DHCP even after setting to NAND AND SAVING.I now see nand and NAND2 ILL TRY 2. this is y i only use android boxes. this was given to me to try and fix.. still same error issue. dhcp wants to load but error..
I'm not sure. This is after the factory reset?
Hello brother my Magbox keeps turning on and that causes my tv to turn on can you help me out?
Hi Andy. Go to setting then Advanced setting, make sure HDMI-CEC is disabled.
super
Thank you
I lost everything . :(
It shoes file missing when we click on anything please help to fix this problem
Hi. when you change channels you are getting file missing? If so then you should contact you service provider.
I did the reset twice but for some reason it gets stuck on screen after I restart the device, screen where it's showing like it's powering up but then doesn't reach the end!!!! Wish I can share pic
Hi. Which box do you have?
@@JasonTech mag322!
I. Just filed a claim and will buy another one or an app for it!
Mine starts loading and then the screen goes black. Power on/of doesnt help
What box do you have?
In my mag254 i dont have that tiny button, how to factory reset
Hi. That means you just have the first generation box. What you do is unplug your box. Hold the menu button down on the remote and don’t let go. Plug your box back in. Keep pointing the remote to your box and you should get a blue menu screen. Then head down to reset box.
On the servers there are only "General" and "more" for me. "Portals" section is missing. Anyone has the same issue?
Hi. In General can you see if you have pool.ntp.org
I have the same problem. What do I have to do. Please help. I don t work with computers.
Hello Jason if one channel not working
Hi. If you are having problems with only 1 channel. The problem is with the server not the box. Contact your provider and tell him the channel your having problems with.
I have mag 322 and when you watch it freezes and before freezes screen turns black I have reset the box what is the problem
What server are you using? It could be your server, Try playing with the buffering option in the main menu. Are you using Wifi or hardwire?
@@JasonTech hardwire
what buffering number 100 what kind
It's starts at 0, try 2 and move up from there. Keep in mind the high you go the longer the channel change will take. I will a video on this if you want?
I have forgot the parental control code. Can anyone tell me how to reset that also I have done a complete reset the box maybe it’s gone on factory settings I have tried 0000, 8080 and 7247 but it’s not working. Can anyone help me plz.
Did you try 9999, 8888
hi how to fix mag 424 w3 thanks
Hi, there's no fix for that box yet. But try talking to your IPTV provide because it only does that with certain servers.
How can I fix
Dónde adquiero un portal?
Siempre es mejor encontrar una persona local, pero si no tienes a nadie cerca. Escriba proveedor de IPTV en su navegador y obtendrá una lista de ellos. Cuando encuentre uno con el que quiera ir, comience con una prueba de 48 horas antes de comprar cualquier mes. Incluso puede obtenerlo en Amazon amzn.to/3tuBdY
I have the page loading error. I have tried everything and it is not working I have the mag324 what do I do.
Loading Error, Is a server problem. Call your server provider and ask him. But it's usually back up in a few hours.
@@JasonTech it has been 5 hours and no response
@@JasonTech I have searched youtube vids as well and nothing works
@@JasonTech I have been with my service provider for so long
@@JasonTech can you make a vid about how to fix page loading error
think i got it. by mistake lol hit load something on the remote screen. i see now what to do home media screen
Hoe het internet op te gaan?
Cześć. Opublikuję dla Ciebie film.
Have a mag 322 with a vpn back up box but for some reason it’s showing disabled on the WiFi but the Ethernet is enabled ..... can’t get into anything ..... any ideas anyone
Hi, did you check to network setting on your MAG? have you made any changes to your WiFi?
No nothing has changed ..... I sussed the disabled bit now, so I have all enabled but still waiting for network setup keeps happening ?
@@JasonTech hello I have sussed the disabled internet bit now, so all is showing enabled now . It just will not load in even with these all enabled just waiting for network keeps showing . Think the url maybe a problem?? It wasn’t before and never changed it
Yes. I think it's the URL, Just so you know there is a lot going on with IPTV services right now. So your URL might of changed.
Jak wejść w internet?
Cześć Emilia. Spróbuj tego. ua-cam.com/video/Ml15ieQVH40/v-deo.html
Gow can i get my URL
Ask your provider for it.
I always have the wrong signature screen
What screen are you talking about?
Mag 324 does not have a button to press unfornatunately like the mag322
Hi Peter. Try this way ua-cam.com/video/NlYVKn_2BAg/v-deo.html
OMG, how do I get all the data back?
Hi. Just type your server portal back onto the box and everything will be back up. Do you know the name of the IPTV Server you where using? ua-cam.com/video/fplntT1nP1o/v-deo.html
After loading the portal my box just goes to a blank black screen. I can access the system settings and thats it. Any ideas?
Unplug your box and hold down the menu button and plug your box back in. Once you get the menu up, go to TV setting and make sure it's on NTSC. If you are in euro make sure it's on PAL.
@@JasonTech thanks but I tried this still doesn't work. Goes from loading portal to just a blank screen. Can't find a fix anywhere.
@@jamesr5722 same
Hello
J'ai rien compris dans ta vidéo
This is actual sabotage not telling you to make sure you Memorize or screen shot the Portal info and password before following his directions... that you willl need them later. Jason, you could VERY easily do a subtitle over the beginning steps to tell people this. Guess I'm just going to return this stupid device to the store.
Hi. Question: Don't you watch a video before trying it out and what do you think will happen when you factory reset a device?
Mag 322 not connecting to WiFi
Hi. Do you have the Mag322w1 or Mag322?
Oh no
Don't touch that button it will lost everythin
It’s a reset button that puts your box back to factory default. What do you mean you lose everything?
Only Internet ( Not available) msg
It helps if you watch the whole video. Your box is on the wrong setting.