@@HermanMartz it’s not bad, most antennas are built into the plastic midframe pieces and those are cheap. But replacing the WiFi module on the board is quite a bit harder
3M Tape Primer. It creates a rough surface for adhesive to stick to, gives it a very strong grip and sometimes allows the factory adhesive to be reused
@@davidschulmann2794 bit risky. Some liquid adhesives can get under the screen and discolor or damage the display. I tend to stick with double sided tape as the most reliable. I've had great results from TESA black tape.
DUDE HELP ME. I😭 One of the 3 Logic board Screws won't come out(volume button one) it is really stuck down and I ruined it trying to unscrew it so many times how do I take it out 😭😭😭
@@NuclearBomb-ow4zf use a small grinding tool to cut a straight line into the screw, then use a flathead screwdriver to extract. If that’s not possible, you’re going to need a precision extractor kit, and it isn’t going to be very fun.
i never use pry tools on there batterys this is what i do to take out battery easy use some dental floss get it behind battery and lightly floss out battery carefully
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
is it easy to replace to the Wi-Fi antenna piece on this device?
@@HermanMartz it’s not bad, most antennas are built into the plastic midframe pieces and those are cheap. But replacing the WiFi module on the board is quite a bit harder
Wait what is that glue thingie you use for the frame?
3M Tape Primer. It creates a rough surface for adhesive to stick to, gives it a very strong grip and sometimes allows the factory adhesive to be reused
@@TapticDigital What if I use liquid glue? Does it help in any way?
@@davidschulmann2794 bit risky. Some liquid adhesives can get under the screen and discolor or damage the display. I tend to stick with double sided tape as the most reliable. I've had great results from TESA black tape.
@@TapticDigital I should too ig, I use the T7000 and only had good results so far. Still, can you drop a link for the double sided tape?
@@davidschulmann2794 sure thing, I just added it to the bottom of the description for this video, I'd get a couple different sizes like 1mm-4mm
DUDE HELP ME. I😭
One of the 3 Logic board Screws won't come out(volume button one) it is really stuck down and I ruined it trying to unscrew it so many times how do I take it out 😭😭😭
@@NuclearBomb-ow4zf use a small grinding tool to cut a straight line into the screw, then use a flathead screwdriver to extract. If that’s not possible, you’re going to need a precision extractor kit, and it isn’t going to be very fun.
@TapticDigital it is not FUN at all 😭😭😭😭😭😭😭😭😭😭😭😭😭
@@TapticDigital I have basically turned the Philips head shape hole into a Regular hole what do I do
i never use pry tools on there batterys this is what i do to take out battery easy use some dental floss get it behind battery and lightly floss out battery carefully
Really? Dental floss? I had never thought of that, but it makes sense! I may give that a try next and see how it works for me.
Just internal transfer,not frame replace
But it went in a new frame. A frame replacement is the same as an internals transfer, because either way the same board is in a different frame.
@@TapticDigital A frame replacemant is the fact when you remove the lcd from frame an put the same lcd on a new frame .period