Thank you so much. I was having this problem on my trx4 g500 and me and my dad thought the steering or the servo horn was broken. But it turned out to be the endpoint settings all along. This was extremely helpful. Thank you for this video. Your amazing 👍🏻👍🏻👍🏻
Thank you!! Mike I'm a really big fan of your vids!! Soo perfect and you've been so successful in a year!!! And moreover you have the blue💙💙 Defender and that says it all!!!😜😉😅👌🏽👌🏽🔝💯
Thank you for the help great helpful video. If i buy a new servo and just plug it in will it work automaticaly or do i have to do something? Im a noob i dont know rc electronics
It should work, the only problem you may encounter is that l/r are reversed.... You can use the tree diagram to guide you through how to flip left/right
Hello from North Norway. Very helpful video. I do exactly as you show, and all goes well until i hold mode button and go to normal mode, then i do not have steering. I have tried calibrating transmitter and esc acording to youtube videos, but nothing helps. Any idea? Hope you can help.
1st check and mess about with the "multifunction knob" not the streering trim, the other one..... Then it looks like it's the steering dual-rate or steering percentagr.... Download the pdf manual and at the end there is the diagram I showed in the video and try programming the steering D-R.... If nothing works DONT WORRY!😃 You can always make restore transmitter to factory default. There is the instructions at the bottom page of the tqi guide and it'll come like new... Then set endpoints again and try to be careful and hope everything goes well 😃🙂
No problem, happy to help. 99% it was tsm... You don't need it on crawler... Or else you set it to steering Dr and was 0.... Happy to help, consider subscribing or sharing the Chanel or video who needs it would be great!!!👌🏽👌🏽 Thank you
Hi. I do it with instructions and it fails I do it with you like in a movie and it fails. It always turns harder to one side. When I make the first turn of the wheels and confirm "set", it turns all the way and not completely the other way around😢
just solved the problem. this setting did not want to work properly because I had reverse on the turn channel. I had the model upside down and didn't notice it hehe
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Thank you so much. I was having this problem on my trx4 g500 and me and my dad thought the steering or the servo horn was broken. But it turned out to be the endpoint settings all along. This was extremely helpful. Thank you for this video. Your amazing 👍🏻👍🏻👍🏻
Perfect video! Just installed a new servo and this is going to help me not overturn thank you so much!!
Hi Julian, great, a useful video. Hope you're still uploading. You win anither subscription! worked a treat 👍🍺🇬🇧
Thank you
Very clear instructions. I haven’t done mine but i will do it soon before the hubs breaks.
Thanks for your comment. 👌🏼🙏🏼
really helpful!
Thank you!!
Mike I'm a really big fan of your vids!! Soo perfect and you've been so successful in a year!!! And moreover you have the blue💙💙 Defender and that says it all!!!😜😉😅👌🏽👌🏽🔝💯
Thank You for the help!
Nice video! Thanks for info!
thanks for the great video.. wanted to ask please what servo model are you running
I run a spt 35kg €15 WP servo. Run it on 8v with my mamba X no problems and use it on all of my rigs. Love it!
Thank you for the help great helpful video. If i buy a new servo and just plug it in will it work automaticaly or do i have to do something? Im a noob i dont know rc electronics
It should work, the only problem you may encounter is that l/r are reversed.... You can use the tree diagram to guide you through how to flip left/right
Muchas gracias por la informacion a mi me rozaba con la carroceria al llevar separadores crees que se solucionara con eso?hay otras opciones?
No you won't solve rubbing body by limiting steering. It's normal for tyres to rub if you use spacers
Y no habria manera de solucionarlo? Solo rozan al girar
Great video. And is it the same setup for bronco 2021 trx4?
Yes same setup and electronics in the new trx
Thx for the info
No problem. Thanks for your support
Thanks brother
Nice!
Thank you! Cheers!
Hello from North Norway. Very helpful video. I do exactly as you show, and all goes well until i hold mode button and go to normal mode, then i do not have steering. I have tried calibrating transmitter and esc acording to youtube videos, but nothing helps. Any idea? Hope you can help.
1st check and mess about with the "multifunction knob" not the streering trim, the other one..... Then it looks like it's the steering dual-rate or steering percentagr.... Download the pdf manual and at the end there is the diagram I showed in the video and try programming the steering D-R....
If nothing works DONT WORRY!😃 You can always make restore transmitter to factory default. There is the instructions at the bottom page of the tqi guide and it'll come like new... Then set endpoints again and try to be careful and hope everything goes well 😃🙂
@@Julian44444 I "messed" around with the knop and VOALA, every thing work as it should👏👏👍😊, thank you for exellent help✊👍👌
No problem, happy to help. 99% it was tsm... You don't need it on crawler... Or else you set it to steering Dr and was 0.... Happy to help, consider subscribing or sharing the Chanel or video who needs it would be great!!!👌🏽👌🏽 Thank you
@@Julian44444 I Will sub 🙂👍
what electronics are You running?
Hobbywing 1080 brushed esc, and stock motor is just perfect. 35kg spt servo. And tr4 micro servos
Salamat
Very good👍👍🔔🔔🙏
Thank you! 😁👌🏽
@@Julian44444 don't forget to back your friends
🔔🔔👌🏼
@@Julian44444 okey thanks my friend
Hi. I do it with instructions and it fails I do it with you like in a movie and it fails. It always turns harder to one side. When I make the first turn of the wheels and confirm "set", it turns all the way and not completely the other way around😢
just solved the problem. this setting did not want to work properly because I had reverse on the turn channel. I had the model upside down and didn't notice it hehe
@@RCPiotrhowd you fix it?
👍🏻
How do you reset it?? I set mine way too little and now it don’t turn for anything
Just do it again and it'll come on its own. Or else open the manual and follow instructions for reset transmitter settings
buy the bluetooth module for the tqi radio and set the endpoint from the app it is a whole lot easier that is how i set mine
Thank you for the video!