To easily skip around the video, it's segmented into timestamps: Intro: (0:00) Skillshare sponsor: (0:48) Backstory: (2:19) Upgrades: (3:28) Save vs. Spend Recap: (14:49) Outro: (16:45)
13:30 Wait a sec, Hayley. The limb riser kit you linked to doesn't seem to include those cool looking scale hood mounts that you attached with double sided tape. Mind telling us where you got those? Thanks.
I have a TRX 6 Mamba x with 1900kv on 4s, because i only have 4s I use a Spektrum 5 Channel with Data from my esc. for drifting in snow and offroading i need front & mid/rear diff lock on its own rock light kit is a nice addon i also have the Steering servo Upgraded, im thinking to make the car 8,4V BEC ready i am now thinking about beadlock Rims with the original Tire, because weight and its looks very nice i also planning a street car build on the TRX 4 base because the F150 body.
these things are so reliable its mad, get rid of the traxxas electronics and went power hd micro servos, savox steering and hw axe motor and zero problems. broke the pin that connects the front portal to the shaft the other day after nearly weekly use from release, i measuered the other pin and it had worn down to 0.8mm where it contacts the gear. replaced pins and still going strong
I’ve been upgrading my recent TRX4 Brown F150 high trail! Brass C knuckles , brass hubs , light kit , HW fusion pro 2300 kv , upgraded wheels and tires ( a little smaller ..imo the stock tires are too big) I love watching your upgrades and throughly impressed with your knowledge of the RC world.
Excellent advice for a TRX4. I followed most all your tips and my rigs are perfect for what I expect out of them. Stock motor lasted me three years with weekly river crossings.
Tha k you for this return that could help a lot new TRX owners. For my opinion, this truck is very well born and extremely reliable in any use, that so rare to mark it bolded. He will be so much better with a lot of weight as low as possible No needed of anything over the wheel level, but axles,links,portal hub, wheel hex, ... In brass and it run so much realistically New shocks mount of longer shocks to 100mm could be good, not so hard to keep all whells on ground as often as possible And alloy beadlock wheels and tires 1.9' dependant on ground you want, stock tires are good for begin and sand surface But as soon as you drive on softer or rock or water, tires are made to excellence for these uses. Add a controller one hand wheel steering to be at top of confort. With cruise control you are so easy to fun. All other mods are not necessary but I prefer add lights, ESS dual sound, all metal accessories for looking, light don't forget, and tqi Bluetooth. Stock motor survives at all I try to kill him, including salt water and beach, just redo brushes. You could change but brushed motor are hard to kill. If rock crawling, it should be stay for years. That's it. My opinion From France 🇲🇫 Cheers
Absolutely great video! I just started shortly with my daughter, she want one for her 10th birthday and I got her a TRX-4M. Now I learn the in-and-outs, so that we can develop our small one over time :). I think I watched ~50 RC Videos already, in the last couple of weeks, and I like your Channel and the "RC Review" most. Very friendly style :)! Keep going!
Hello. I was offered one of them last night for cheap. It's only 1 year old and he's only used it 3 times and paid about £900 for loads of extras and only wants about £380 for it but I've got a cen genesis that he's wanted for years. It's barely run in. I bought it new and when I was running it in the pullstart snapped and I've still not fixed it about 15 years later. I have one but I never have time to do stuff like that. You can get carried away upgrading, I know I bought a t maxx and another in bits but the other is all custom parts made from aluminium instead of plastic Which looks mint but it's in bit's. I did build it once and found it's a drive shaft from complete so took it to bits again to upgrade the other because it's got an aftermarket racing engine and hand made tuned pipe on it and does about 90 mph. It's actually hard to keep it on 4 wheels on any terrain. Do you think I should buy or swap the genesis for the TRX? I really do like them and it will be nice to just switch on and go instead of getting the engine going even though that's half the fun and better sounding. Subbed for more cool videos. Do you have many r/c's? ❤️💛💚👍
Very good video! 😊👍🏼It is important to show others what they could potential do to upgrade their rigs with all the option parts out there. I have spent over £2,000 to upgrade my TRX-4 Defender in grey and it is weighing over 5kg. I think I might have overspent on the upgrades, as you suggested not everything is necessary and might have an adverse effect. I'm sure for those who have seen my channel would think I have spent way too much on my TRX-4, but we are all in this RC hobby and free to do whatever we want, which is the beauty of it. Your Defender looks great by the way, and I watching your channel has given me some ideas of what to do to my rig. I upgraded my motor to HobbyWing Fusion 2in1 1800kV after watching your video some months ago, and I love it since I had it fitted, so big thank you to you also! Keep these lovely videos coming!! 😃😎💪🏼👍🏼
@@RCGirl haha.. I know what you mean. To some people they just don't appreciate RCs like us. It is a very nice hobby and people are genuinely very nice and helping each others. Can't believe your TRX-4 is already 3 years old, I think I got mine around the same time, we both started with the grey body but you have changed yours. 😅 oh, I have noticed you have spent some time lately on RC planes which is really cool, I'm also considering flying drone on my channel soon. I live in UK and couple of months ago I have got my licence on A2CofC and Master Class, so want to put my learning into practice. Hopefully I will have some drone footages soon, will see if I can record the rigs from drone, should be fun and cool to do. 👍🏼😅😃🥰
Great video, agree with the brass you don’t need all of it for sure, Your Traxxas transmitter will bind up to 30 different traxxas models, get the Bluetooth module you can adjust all the settings change the multifunction knob to all different things like TSM, steering sensitivity etc, and with the Traxxas lighting kit I can change the lights high low and turn on off the head lights rock lights and roll bar lights,
Spend where needed and save up for the fancy longer lasting parts. I dont have one but it would be metal axles, servos (steering then micro servos) motor bead lock rims (opens up options) then accessories, added weight.
I've got a wonderful TRX4 and started upgrading and making the chassis stronger. I put the metal gear set into the shift servo, and surprisingly I do believe I have the stock steering servo. For a 4 year old Defender its held up really well. However I've gone through countless motors. I would like to upgrade to the Hobbywing
Wow, this is such a great video! Thank you so much for taking the time to make this. After much deliberation and driving of a colleagues TRX4, I pulled the plug. I'm usually a speed freak but I am looking forward to this coming and all the upgrades that can be achieved over time!
Thanks for the tips. Just picked up my Defender yesterday. It was fun to buy since my last RC was purchased in 1989. thanks again for introducing to the TRX-4.
Just bought a trx 4 kit. Never been into scale rc before. But I’m addicted to that scale crawling. So much fun. I just hope to get the suspension to act like a real size rig.
Love this video, looking to get into crawling and decided the TRX 4 Defender as my first rig. Love your content and will really help me with this new hobby. Thank you!!
A really interesting video! We bought our TRX4 Defenders a year ago now and have used your thoughts and ideas when considering what i wanted to change or up-grade. We didn't go full metal axles, but much of your other ideas have been taken on board! So its great to hear that after 3 years your TRX4 is still going well on what you chose. We are well happy with ours - long may they, and your videos about them continue!
what most people do not realize is you can buy the blue tooth tx an install it to your remote. an down load the app to your phone. then you have every thing you need to set up. so get the app and blue tooth and check it out.
If you are looking to upgrade the tires look at the pro line krawlers and proline super swampers. Jconcepts land mines are Also another great tire. Another thing worth adding is the traxxas light kits are well worth the money. They aren't quite as bright as the my trick rc but everything is well thought out and made specifically for your specific truck. I've got a few of the traxxas light kits and light bars and ive never had an issue with any of the lights burning out or the wires.
Great suggestions thanks!!! I have a TRX4 Mercedes g500. I hike alot and really want to emphasize how awesome the cruise control is with the Hobbywing. In New England it's all hills. Being able to maintain the exact speed and easily drive one handed makes hiking really easy.
Thank you for your video. I ordered a TRX4 Defender yesterday and have already been considering what upgrades I should get ;-) Now I know what's necessary and what can wait, thanks to you! I think I'll start with the axles, as I really like them and it will add more weight 🤗
Yes, the TR4 is a perfect replacement for the stock shift/diff servos. Out of two rigs, I've only lost one stock servo and the was actually my fault by trying to remove the servo arm while the radio was on. That said, I have several TR4s on the shelf ready to go when needed.
Great video. Very useful. Thanks. (About to start the TRX4 assembly kit with Defender body and will definitely be adding some of your upgrades to it as I go.)
I started with a Traxxas T-Max Nitro truck and somehow managed to put almost $2k into it, which is a lot for the nitro era. Since discovering electric crawlers on YT, I'm putting together a setup that'll keep me highly entertained. Thinking about the 4WS Axial and would love to see someone put together a video of suggestions for immediate mods and upgrades to do. Pretty sure I want the 4-channel radio, to enable Dig and get fluid rear steering.
good job its nice to see someone put some value sense in the build to save others from unnecessary upgrades which is exactly what I am working on with the axial gladiator
I just got the 2021 bronco &i ordered wheels&a roof rack with led light bar,i also ordered the holmes hobbies 8t brushed motor,waitn for all my upgrades 2 come in !!
What an inspirational video! I have bought 1 year ago exactly the same TRX4 Defender. I have one small question. I see that you have modified roll cage element that allowed you to fit windshield wipers. Have you 3d-printed it or buy somewhere?
Nice video & helpful to hear your opinions after some time testing these out. My daughter and I like watching your videos and this gave her some new ideas for her TRX-4 sport kit that we just built. Cheers!
12:43 If I'm not totally mistaken the external port on the XL-5 (TRX-4 ESC) is just a connection to your battery. So solder your own plug onto the connector that you connect to your battery. Edit: Before you plug anything to the battery, make sure that it can handle the voltage the battery delivers.
I keep my brass to a minimum: just outer portal covers and a front diff cover for weight down low. I do have brass lower link/shock mounts, but I have them to increase durability, not for the little bit of weight they provide.
Nice video, thank you :-) For shift servo and steering servo I can recommend AFG-RC, Reefs (rebrand of AFG-RC) and Holmes Hobby. I would change the radio system, I can really recommed FlySky NB4. Originally it was a 4 channel...hence the name, but today it can handle a 12 channel! So many options on it, also able combine channels, setting endpoints, controlling light and winch etc. Oh and it can be used for right and left handed.
The metal gear version of the Traxxas micro servos worked well for my buddies and I. My stock ones all failed. The first one started burning within a couple minutes of my first run.
Great vid I agree with all you said you’ve done a great review on multiple items I’m new to crawling but not to Rc I think you’ve paved the road to getting the most out of a trx4 with the right upgrades thanks a lot
Great video and suggestions. I always try and keep my trucks as standard as I can but theres so many pretty, shiney things out there its not easy damnit *LOL* , on Ready To Runs I always ditch the steering servo and upgrade to metal gears if it hasnt got them.
My TRX is 3 years old and still on the stock steering servo...but I hate it....so lazy and slow.... I probably will change in the near future..... I have the same brushless motor and ESC and it’s brilliant..... hmmm....more goodies.... Great honest review
"Don't be that person who runs it at full volume." LoL might have done that with my ESS One+ when I had my pinion geared too low and my transmission was way to loud.
So this TRX-4 of mine was intended for the Killerbody Gladiator. Didn’t get it to work. Now has ESS-1, 72g hub weights, Traxxas lights with Pro Scale control, . Is the black whip antenna on the back of your actually the antenna or a dummy?
The jst plug that comes from the traxxas esc has battery voltage. You can cut that jst harness right off the old esc and solder it to your battery plug for your esc leads.
In your opinion/ experience is the Fusion faster than the stock motor on 3s lipo? And do you think it could handle stepping up the pinion to a 16 tooth to definitely have a faster top speed? I want to maintain crawl ability and add top end for a little extra whee...You know how important a bit of wheee can be.
I notice you haven’t done the driveshafts yet. Any plans? Mine get a little squeaky or make ticking sounds, especially after I added the castle slate motor and esc. Mineral oil helps temporarily, but I’m debating getting some high quality metal shafts.
Great Review!! When you first got shocks I figured they wouldn't beat the Traxxas units. I find most 'sound' units annoying but after going to the trouble of loading your own sound it maybe alright. Would you put brass on without the metal axle housings? I've seen broken parts after adding brass but not from 'scale' driving.
Great video!! I finally bought a Defender TRX-4. What a rig! - I'm planning on running ELRS ( Long Range System TX/RX ) As I like the fact it has a seperate receiver thats interchangeable. Also have a DJI Air 03 unit coming with the goggles 2. Installed the ESS Dual sound module, It sounds sick! Going to keep everything else stock for now. I'm also running her on 3s x2 5000 mAh Batts. I had the Traxxas 3s 5000's but have decided to give them to my friend and I will run some equivalent Graphene's in her. So I'm going to have a Traxxas TX and receiver spare that I may use for one of my boats...(Radiomaster 1W radio system going in ) Does anyone know the ground range on the Traxxas radio? I haven't tested the range with stock TX? Also... Is there other tyre brands that will fit the axles? ..I nearly fell over when I priced the Traxxas upgraded wheels! The Defender is my favourite chillout big boys toy now. Love the channel... Take care, MQ4 - Australia.
To easily skip around the video, it's segmented into timestamps:
Intro: (0:00)
Skillshare sponsor: (0:48)
Backstory: (2:19)
Upgrades: (3:28)
Save vs. Spend Recap: (14:49)
Outro: (16:45)
13:30 Wait a sec, Hayley. The limb riser kit you linked to doesn't seem to include those cool looking scale hood mounts that you attached with double sided tape. Mind telling us where you got those? Thanks.
Oh, I see; You cannibalized a pair of D-links. :-)
@@IllusionSector haha yep those are just tow shackles without the shackle on it
holy shit. ur car is pimped
I have a TRX 6
Mamba x with 1900kv on 4s, because i only have 4s
I use a Spektrum 5 Channel with Data from my esc. for drifting in snow and offroading i need front & mid/rear diff lock on its own
rock light kit is a nice addon
i also have the Steering servo Upgraded, im thinking to make the car 8,4V BEC ready
i am now thinking about beadlock Rims with the original Tire, because weight and its looks very nice
i also planning a street car build on the TRX 4 base because the F150 body.
It’s rad to see a woman that understands and appreciates the rc hobby 👍
Right!? My now ex wife always said it was a immature hobby. 🙄
@@adammorgan7874 did she become EX after she said that 😆😆😆
😂 she did actually. 🤷🏻♂️ what can you do.
@@adammorgan7874 She was just salty
did you just assume her pro-noun
these things are so reliable its mad, get rid of the traxxas electronics and went power hd micro servos, savox steering and hw axe motor and zero problems. broke the pin that connects the front portal to the shaft the other day after nearly weekly use from release, i measuered the other pin and it had worn down to 0.8mm where it contacts the gear. replaced pins and still going strong
I just seen it in the comments but I was gonna mention the Ecopower Micro Servos. They are a great little servo.
I’ve been upgrading my recent TRX4 Brown F150 high trail! Brass C knuckles , brass hubs , light kit , HW fusion pro 2300 kv , upgraded wheels and tires ( a little smaller ..imo the stock tires are too big)
I love watching your upgrades and throughly impressed with your knowledge of the RC world.
Excellent advice for a TRX4. I followed most all your tips and my rigs are perfect for what I expect out of them. Stock motor lasted me three years with weekly river crossings.
For shift servos you need to get power hd tr4 micro servos there full metal and work wonderful
Thank you for this!
Also they can handle 7.4V.
Noob question. What are shift servos?
@@soota6083 the servo that takes it from 1st to 2nd kinda like the steering servo
Great video, just bought a Defender today and looking at mods and appearances.
💯👍👍
Tha k you for this return that could help a lot new TRX owners.
For my opinion, this truck is very well born and extremely reliable in any use, that so rare to mark it bolded.
He will be so much better with a lot of weight as low as possible
No needed of anything over the wheel level, but axles,links,portal hub, wheel hex, ... In brass and it run so much realistically
New shocks mount of longer shocks to 100mm could be good, not so hard to keep all whells on ground as often as possible
And alloy beadlock wheels and tires 1.9' dependant on ground you want, stock tires are good for begin and sand surface
But as soon as you drive on softer or rock or water, tires are made to excellence for these uses.
Add a controller one hand wheel steering to be at top of confort. With cruise control you are so easy to fun.
All other mods are not necessary but I prefer add lights, ESS dual sound, all metal accessories for looking, light don't forget, and tqi Bluetooth.
Stock motor survives at all I try to kill him, including salt water and beach, just redo brushes.
You could change but brushed motor are hard to kill. If rock crawling, it should be stay for years.
That's it.
My opinion From France 🇲🇫
Cheers
I bought the red defender because I like yours so much.
😆🤙🏼
I replaced one of mini servo with a EcoPower 640T for the 2 speed transmission. Great little unit!
Thanks I'll check it out!
I agree with everything you said. Stock shocks can’t be beat.
I agree: I have them on two other non-Traxxas vehicles.
I've changed all the tiny servo too TR-4 POWER HD THEY have been awesome and no modifications needed
I’ve got a question about those! Are they waterproof and what voltage do they run at? I’d love to find some 7.4v waterproof mini servos!
@@sloguyty5915 yes they are waterproof
The engine sound of this crawler is very cool 😎👍😀
Absolutely great video! I just started shortly with my daughter, she want one for her 10th birthday and I got her a TRX-4M. Now I learn the in-and-outs, so that we can develop our small one over time :). I think I watched ~50 RC Videos already, in the last couple of weeks, and I like your Channel and the "RC Review" most. Very friendly style :)! Keep going!
Hello. I was offered one of them last night for cheap. It's only 1 year old and he's only used it 3 times and paid about £900 for loads of extras and only wants about £380 for it but I've got a cen genesis that he's wanted for years. It's barely run in. I bought it new and when I was running it in the pullstart snapped and I've still not fixed it about 15 years later. I have one but I never have time to do stuff like that. You can get carried away upgrading, I know I bought a t maxx and another in bits but the other is all custom parts made from aluminium instead of plastic Which looks mint but it's in bit's. I did build it once and found it's a drive shaft from complete so took it to bits again to upgrade the other because it's got an aftermarket racing engine and hand made tuned pipe on it and does about 90 mph. It's actually hard to keep it on 4 wheels on any terrain. Do you think I should buy or swap the genesis for the TRX? I really do like them and it will be nice to just switch on and go instead of getting the engine going even though that's half the fun and better sounding. Subbed for more cool videos. Do you have many r/c's? ❤️💛💚👍
Glad I came across this video have a trx4 kit that's supposed to be delivered tomorrow
A really helpful summary! I love that you pointed out what’s a good value for the money in terms of improving performance. Your rig looks amazing!!
Very good video! 😊👍🏼It is important to show others what they could potential do to upgrade their rigs with all the option parts out there. I have spent over £2,000 to upgrade my TRX-4 Defender in grey and it is weighing over 5kg. I think I might have overspent on the upgrades, as you suggested not everything is necessary and might have an adverse effect. I'm sure for those who have seen my channel would think I have spent way too much on my TRX-4, but we are all in this RC hobby and free to do whatever we want, which is the beauty of it. Your Defender looks great by the way, and I watching your channel has given me some ideas of what to do to my rig. I upgraded my motor to HobbyWing Fusion 2in1 1800kV after watching your video some months ago, and I love it since I had it fitted, so big thank you to you also! Keep these lovely videos coming!! 😃😎💪🏼👍🏼
haha yeah when someone on the trail (who isn't in the RC hobby) asks "how much do those things cost?" ..... Yikes!
@@RCGirl haha.. I know what you mean. To some people they just don't appreciate RCs like us. It is a very nice hobby and people are genuinely very nice and helping each others. Can't believe your TRX-4 is already 3 years old, I think I got mine around the same time, we both started with the grey body but you have changed yours. 😅 oh, I have noticed you have spent some time lately on RC planes which is really cool, I'm also considering flying drone on my channel soon. I live in UK and couple of months ago I have got my licence on A2CofC and Master Class, so want to put my learning into practice. Hopefully I will have some drone footages soon, will see if I can record the rigs from drone, should be fun and cool to do. 👍🏼😅😃🥰
Great video, agree with the brass you don’t need all of it for sure, Your Traxxas transmitter will bind up to 30 different traxxas models, get the Bluetooth module you can adjust all the settings change the multifunction knob to all different things like TSM, steering sensitivity etc, and with the Traxxas lighting kit I can change the lights high low and turn on off the head lights rock lights and roll bar lights,
Spend where needed and save up for the fancy longer lasting parts. I dont have one but it would be metal axles, servos (steering then micro servos) motor bead lock rims (opens up options) then accessories, added weight.
PowerHD for micro servos. Replaced my stock and haven’t had any problems yet. 1 year strong.
Thank you so much for being absolutely clear about which parts were sent, it makes everything so much more believable! I wish everyone was like this!
I've got a wonderful TRX4 and started upgrading and making the chassis stronger. I put the metal gear set into the shift servo, and surprisingly I do believe I have the stock steering servo. For a 4 year old Defender its held up really well. However I've gone through countless motors. I would like to upgrade to the Hobbywing
Thanks for the ideas. I got a TRX4 Sport for my nephew. He doesn't use it much yet but need to keep in mind upgrades for the future. Cheers!
I enjoyed your video it was really helpful thank you 😊
Wow, this is such a great video! Thank you so much for taking the time to make this. After much deliberation and driving of a colleagues TRX4, I pulled the plug. I'm usually a speed freak but I am looking forward to this coming and all the upgrades that can be achieved over time!
I use the Power HD TR-4 micro servos in my TRX-4 Defender and they work great! Direct replacement, metal gearing and you can run 'em on 7.4V!
And they are high voltage too! This is great can finally up my BEC thats all that was holding me back
Completly agree with you, mine is upgraded almost like yours exept the metal axles 😉
Thanks for the tips. Just picked up my Defender yesterday. It was fun to buy since my last RC was purchased in 1989. thanks again for introducing to the TRX-4.
....and agreed, one of the most reliable and fun RC vehicles ever
I am sure already mentioned, i use tr-4 hd micro servo for my trx4 and trx6. Been great so far. Can get them on ebay/amazon/aliexpress
Thanks for sharing your experience! I just got mine, and now I know what to do/expect in the future. Much appreciated and high quality content.
Just bought a trx 4 kit. Never been into scale rc before. But I’m addicted to that scale crawling. So much fun. I just hope to get the suspension to act like a real size rig.
@ RC Girl It looks like your passenger side tires are on backwards, but maybe I'm wrong.
Love this video, looking to get into crawling and decided the TRX 4 Defender as my first rig.
Love your content and will really help me with this new hobby. Thank you!!
You wont regret it! Have fun!
I don't have a trx4 yet. But what you said will for the most part hold true for most scale rig. Love your channel.
I just changed the 3 mini servos recently
A really interesting video! We bought our TRX4 Defenders a year ago now and have used your thoughts and ideas when considering what i wanted to change or up-grade. We didn't go full metal axles, but much of your other ideas have been taken on board! So its great to hear that after 3 years your TRX4 is still going well on what you chose. We are well happy with ours - long may they, and your videos about them continue!
what most people do not realize is you can buy the blue tooth tx an install it to your remote. an down load the app to your phone. then you have every thing you need to set up. so get the app and blue tooth and check it out.
Yep thanks for mentioning, forgot to say that!
For sure i love trx4 shocks I use them on my Gspeed lcg rig instead of the dlux fabs and I love there low and slow rebound.
Great video. Time flies when your having fun. Mine is about three years old now. I put the orange and black body on and did home made interior.
Just brought a TRX4 Defender. Can't wait to get it rolling.
I just ordered my first TRX-4 Defender! Can’t wait to crawl it. Can I get some of your stickers to put on it??
I think you covered everything really well.
NSDRC makes amazing servos and now has a micro servo I recommend that for a shift servo
Just got my Defender yesterday! Super happy with it. Thanks for the video.
If you are looking to upgrade the tires look at the pro line krawlers and proline super swampers. Jconcepts land mines are Also another great tire. Another thing worth adding is the traxxas light kits are well worth the money. They aren't quite as bright as the my trick rc but everything is well thought out and made specifically for your specific truck. I've got a few of the traxxas light kits and light bars and ive never had an issue with any of the lights burning out or the wires.
How do I get the links for the parts cause I have a defender and I wanna upgrade it to have more weight on the bottom
Thanks for the review of your upgrades over the years. Very helpful. Always enjoy your videos. Crawl on!
Great suggestions thanks!!! I have a TRX4 Mercedes g500. I hike alot and really want to emphasize how awesome the cruise control is with the Hobbywing. In New England it's all hills. Being able to maintain the exact speed and easily drive one handed makes hiking really easy.
The best micro servo replacement for the trx4 is from Power HD the PHD-TR4. 100% compatible
Thank you for your video. I ordered a TRX4 Defender yesterday and have already been considering what upgrades I should get ;-) Now I know what's necessary and what can wait, thanks to you! I think I'll start with the axles, as I really like them and it will add more weight 🤗
I just picked up a TRX-4 Bronco. Going to look into some brass hubs and a stronger steering servo!
Shift servo hop up would be TR4 Power HD servos. I think they’re good up to 7.4v.
yes, but not the stock reciever....
Yes, the TR4 is a perfect replacement for the stock shift/diff servos. Out of two rigs, I've only lost one stock servo and the was actually my fault by trying to remove the servo arm while the radio was on. That said, I have several TR4s on the shelf ready to go when needed.
Trx4 Bronco here. Its durable and fun
Thank for the trx4 video. 🚲💨
Great video. Very useful. Thanks. (About to start the TRX4 assembly kit with Defender body and will definitely be adding some of your upgrades to it as I go.)
Got this last year from my friend for my birthday... Yes, super awesome friend! My first one and I am loving it! Very informative video! 😎
Love the content. Your upgrades gives me ideas to do my TRX4 Blazer. Thanks for sharing.
I started with a Traxxas T-Max Nitro truck and somehow managed to put almost $2k into it, which is a lot for the nitro era. Since discovering electric crawlers on YT, I'm putting together a setup that'll keep me highly entertained. Thinking about the 4WS Axial and would love to see someone put together a video of suggestions for immediate mods and upgrades to do. Pretty sure I want the 4-channel radio, to enable Dig and get fluid rear steering.
good job its nice to see someone put some value sense in the build to save others from unnecessary upgrades which is exactly what I am working on with the axial gladiator
Tr4 HD shift servos are the only option worth looking at. However I have mine on 8.5 volts and my stock servos have been fine.
Just getting back into RC's and this vid convinced me on the Traxxas TRX-4.
Thanks.
I just got the 2021 bronco &i ordered wheels&a roof rack with led light bar,i also ordered the holmes hobbies 8t brushed motor,waitn for all my upgrades 2 come in !!
What an inspirational video! I have bought 1 year ago exactly the same TRX4 Defender. I have one small question. I see that you have modified roll cage element that allowed you to fit windshield wipers. Have you 3d-printed it or buy somewhere?
Nice video & helpful to hear your opinions after some time testing these out. My daughter and I like watching your videos and this gave her some new ideas for her TRX-4 sport kit that we just built. Cheers!
12:43 If I'm not totally mistaken the external port on the XL-5 (TRX-4 ESC) is just a connection to your battery. So solder your own plug onto the connector that you connect to your battery.
Edit: Before you plug anything to the battery, make sure that it can handle the voltage the battery delivers.
The small red connector from the TRX ESC is for accessories such as the LED lights power module etc....
As someone who just got the Defender, this was an amazingly useful video.
I actually enjoy this video you are well detailed and very suggestive and don't push people to upgrade! I look forward to more videos!
Very good video for a TRX-4 beginner like me.
I keep my brass to a minimum: just outer portal covers and a front diff cover for weight down low. I do have brass lower link/shock mounts, but I have them to increase durability, not for the little bit of weight they provide.
I went exactly the way you did, just waiting on parts..
Excellent work on the video! I think I remember telling you that a trx4 was in my future. I’m done, it’s over. Which one should I get?
Nice!! I think you'll be happy with any of them. I've liked the look of the red/black K5 blazer (if I didn't have the defender).
@@RCGirl I’ll have to save the trx4 for another day, I just bought the rc4wd mint green Land Rover 🤦♂️
Nice video, thank you :-) For shift servo and steering servo I can recommend AFG-RC, Reefs (rebrand of AFG-RC) and Holmes Hobby.
I would change the radio system, I can really recommed FlySky NB4. Originally it was a 4 channel...hence the name, but today it can handle a 12 channel! So many options on it, also able combine channels, setting endpoints, controlling light and winch etc. Oh and it can be used for right and left handed.
The rig is absolutely gorgeous. Your attention to detail make it look amazing.
Great vid. Perfect timing. Just got my TRX4 Defender last week and looking to upgrade and personalize it a bit
Nice to see all the upgrades and your thoughts in one video. Outstanding looking rig.
The metal gear version of the Traxxas micro servos worked well for my buddies and I. My stock ones all failed. The first one started burning within a couple minutes of my first run.
Very cool, informative vid. Thank you. How do you feel about replacing plastic links with stainless?
This video was so helpful can’t wait to get the blazer tr4!
New to the hobby and just wanted to say a big thank you for your videos on the trx 4. I've just had the rig and your videos were awesome 👌
Great vid I agree with all you said you’ve done a great review on multiple items I’m new to crawling but not to Rc I think you’ve paved the road to getting the most out of a trx4 with the right upgrades thanks a lot
Great video and suggestions. I always try and keep my trucks as standard as I can but theres so many pretty, shiney things out there its not easy damnit *LOL* , on Ready To Runs I always ditch the steering servo and upgrade to metal gears if it hasnt got them.
I love my defender too, these things can't be beat, although I went for more scale than performance
That motor esc combo has my buy it now instinct kicking in
My TRX is 3 years old and still on the stock steering servo...but I hate it....so lazy and slow.... I probably will change in the near future..... I have the same brushless motor and ESC and it’s brilliant..... hmmm....more goodies....
Great honest review
"Don't be that person who runs it at full volume." LoL might have done that with my ESS One+ when I had my pinion geared too low and my transmission was way to loud.
I wonder if it would be loud enough to drownd out the 'singing' of my Mamba/Outrunner combo?
So this TRX-4 of mine was intended for the Killerbody Gladiator. Didn’t get it to work. Now has ESS-1, 72g hub weights, Traxxas lights with Pro Scale control, .
Is the black whip antenna on the back of your actually the antenna or a dummy?
Wonderfull, 3 year but still look new, that steering servo still very expensive in my country sadly, great review rc girl🤗👍👍👍
Thanks for your video lot of info as i enjoy watching
The jst plug that comes from the traxxas esc has battery voltage. You can cut that jst harness right off the old esc and solder it to your battery plug for your esc leads.
nice video. the trx4 is the best all around crawler. I have the trx4 sport and have bashed the crap out of it, very durable!
Great informative Video, Thanks!!!!
In your opinion/ experience is the Fusion faster than the stock motor on 3s lipo? And do you think it could handle stepping up the pinion to a 16 tooth to definitely have a faster top speed? I want to maintain crawl ability and add top end for a little extra whee...You know how important a bit of wheee can be.
I notice you haven’t done the driveshafts yet. Any plans? Mine get a little squeaky or make ticking sounds, especially after I added the castle slate motor and esc. Mineral oil helps temporarily, but I’m debating getting some high quality metal shafts.
Super helpful video as I just got my trx4 defender yesterday.
Hayley great video as always I could watch your videos over and over and not get tired of them
How awesome!! Thank you for sharing this. I just got a TRX4 F150 High trail.. my steering already went out.. any advice for a servo that will last?
EMAX Metal Gear Waterproof Digital are the best bang for your buck mate! Check em out.
Thank you so much! I'm doing it today.🤝🍻💪❤
@@chug_n_toke8849 👌
I can't wait to pick up some metal axles. Going with vitavon and get them custom colored to match my red defender.
Great Review!! When you first got shocks I figured they wouldn't beat the Traxxas units. I find most 'sound' units annoying but after going to the trouble of loading your own sound it maybe alright.
Would you put brass on without the metal axle housings? I've seen broken parts after adding brass but not from 'scale' driving.
I think you can add a brass diff cover or portal weight but would probably not add everything I did w/o metal axles for the reason you mention
Great video!! I finally bought a Defender TRX-4. What a rig! - I'm planning on running ELRS ( Long Range System TX/RX ) As I like the fact it has a seperate receiver thats interchangeable. Also have a DJI Air 03 unit coming with the goggles 2. Installed the ESS Dual sound module, It sounds sick! Going to keep everything else stock for now. I'm also running her on 3s x2 5000 mAh Batts. I had the Traxxas 3s 5000's but have decided to give them to my friend and I will run some equivalent Graphene's in her.
So I'm going to have a Traxxas TX and receiver spare that I may use for one of my boats...(Radiomaster 1W radio system going in ) Does anyone know the ground range on the Traxxas radio? I haven't tested the range with stock TX?
Also... Is there other tyre brands that will fit the axles? ..I nearly fell over when I priced the Traxxas upgraded wheels!
The Defender is my favourite chillout big boys toy now. Love the channel... Take care, MQ4 - Australia.