M54/M52TU Vanos Kit: click.linksynergy.com/link?id=BZfgVZ7JGM8&offerid=580643.14009144654&type=2&murl=https%3A%2F%2Fwww.ecstuning.com%2Fb-ecs-parts%2Fecs-m5x-dual-vanos-rebuild-kit%2F012017ecs%7Edk%2F These videos take a long time to film and edit, but I hope I get to help a lot of you. You can support me by buying from the links in the description, becoming a channel member using this link: ua-cam.com/channels/5jnm5CEnLSEmoQ-ktgAj6g.htmljoin, buying my merch on www.shoplifetv.com , following my vlog channel: ua-cam.com/users/shoplifevlogs ,or just subscribing and liking the video! Thank you! Let me know if you have any questions!
Greetings from South Africa. Your channel and dedication are the main reasons my 2004 320i have not been to a dealership or shop for many years now. Because of you I have been able to DIY all key issues and continue to drive my car without hesitations or concerns. Thank you Ankur !!!
Just a small note: at 27:06 you mention 6 ft-lb but according to BMW TIS it is 10Nm which equals to something slightly above 7ft-lb :) In case anybody doesn't know why it is important to stick close to OEM torque specs - thermal changes stretch materials and if you have your screw too loose it may slowly unscrew itself and if too tight it may snap off. There are tolerances on everything so you don't have to be exactly 100% spot on torque specs but the closer the better of course :) TIS SOURCE: 4AZ Linksgewinde: Passschraube für Hydraulikkolben an Zahnwelle
M52TU / M54 / M56 M6 10 Nm *My personal offline TIS is in german but in this case you don't need a translation And at 28:04 you mention "nice and tight" as a torque spec :) if you don't mind me translating that sentence into a number then it would be 50Nm which is quite a lot TIS SOURCE: 3AZ Verschlussschraube an VANOS-Verstelleinheit M52 / M52TU / M54 / M56 / S52 / S50US / M50 / VANOS M22 x 1,5 50 Nm PS: There used to be a few online TIS versions but BMW did a great job at shutting them down completely and there will problably never be another one. There was a lawsuit in Germany during 2020 that demanded access to all the torque specs and DIY related information for car owners that did not wanted to have to visit a mechanic to repair their own bought cars and BMW (and basically all car manufacturers) had to make it accessible. And they did but of course in a BMW sort of way. At BMW everything costs extra. One day you'll probably have to pay for a "welcome" greeting upon your entrance :) You can buy a one day pass, a monthly pass or a 365 days pass. None of those 3 are in the "I am a DIY person" price range so don't even bother to check it. If there ever will be an online TIS again it will most likely be down very soon.
So to be clear, you just started the car as usual, same as you would after an oil change. I am thinking that if you use some oil on assembly of the bearing and anti rattle spacer you should be fine.
Thank you I am trying to be doing this to my 03 e39 530i this weekend. My oil hose had a crack in it and crumbled when I tried to take it off. Vacuum lines were brittle and had to replace a few after crumbling. The disa valve needed a rebuild. Cleaned pretty good now just have to take off the fan clutch and go to town. Thank you again great channel
Another awesome tutorial by the BMW master! Thank you, that is my next job and will surely play this video while doing it! Thanks mate, you’re a legend!👍🙌
Also not noted in video is Bearings should be slightly lubed and you should always bolt the pistons back onto the cams and make sure they spin with little force If not use sandpaper to sand down the spacer between bearings and recheck. Spin each one counter clockwise. They should spin with very little force not spin it and it just keeps going like a fidget spinner then spacer is too thin which will cause rattling. After confirming this then put pistons back into the Vanos case and install on engine. By not doing this step it can cause performance issues and check engine light to come on.
Brother I have a 2000 328 and was debating on how to do this job and I’m happy I watched your video 👍👍 I decided to spend more for the rebuilt unit and it was a easy diy but pricy 🙃
Where do I find it... let me do that. Just changed the vanos unit. Tried to fill it with oil 🛢 and ended up spilling it on the belts and hoses. Cleaned that off with hot water and dishwasher detergent...
I am about to do this job, but seals only - there is no rattle, but my engine struggles at low revs and my fuel economy is way down. How does it compare to other jobs, as far as difficulty? I've done the CCV (the lazy way, but I did the valve cover gasket at the same time) and the oil filter housing gasket already...
Steps worked perfectly for me. Now how to reset adaptations? There are about 5 different ways online. PA Soft resets DME, but not sure I want to do that with a custom tune.
Note from Beisan Systems: "If a bolt breaks, continue removal of vanos from engine. Once vanos is removed remaining bolt in splined shaft can be easily unthreaded (pick tool), left hand thread."
Let me add some things. Lubricate all parts with Mobil 1 synthetic oil. Never put together dry! 2nd, I measured the thickness, (bushing) the replacements are .005” thinner. There was a lot of play in the old ones. Tightening up the stack a bit. Less rattle. Use small exact knife to cut seals on an angle, be careful, take your time. Rock the knife slowly. Oil outer seals and run under hot weather from the sink. Rotate 90 degrees while trying to put in grooves. This way stretching evenly. It will pop in place, more oil needed here. Damage is done on rebuilds in the 1st minutes of starting the vehicle. Always lube, takes a minute to get oil in the lines. Just sayin! Buy Beisan sys seal kit. Go slow!
Hi very nice and helpful video 👌 . I've trying to find where is the problem with my car . So , no errors in ECU car is lack of power seems like is struggling from low rpms . Was done : air filter , sprak plugs , disa valve, air mass , fuel filter , ccv . No difference at all. Any suggestion mate ? Thank you . M54B25 ENGINE
Great video and steps. You mentioned cleaning out the Solenoid(s). Mine are full of thick and dirty oil, which I'd like to remove. What's the best procedure? Thanks!
Oil on the rubber hoses is a bad thing, right? Which is why you make sure to tell people to take precaution to not get oil on them or clean them if they do. But what is a good way to clean oil from rubber hoses? Is there some sort of spray we should use? Just wiping it will still leave a film of oil and I imagine that's not good. Thanks!
Hi I’m hoping you could shed some light on a issue I’m currently trying to figure out and I’m really hoping it’s not what I think it is that is giving the issue so here it goes i recently bought a 2005 X5 4.4i v8,the gut I bought from said it’s been sitting for 5-6yrs winter/summer here in the Illinois state. I started the vehicle let idle for Atleast 45mins or more and I noticed there’s a coolant leak from from the overflow tank I replaced the tank n I see that the temperature gauge on the dash is all the way in the red zone as if the vehicle is overheating but I’m not getting any heat in the inside and even the radiator fan is not on what do you think might possibly be the problem with it
How do y’all feel about the eBay rings and anti rattle parts? I already have the solenoid and oil return lines etc replaced from fcp euro parts but the vanos rebuild kit comes with everything for like $1200 🥴 the rings and springs etc on eBay are less than 100
I picked up a pair of vanos pistons at the junk yard and basically rebuilt them with the new o rings and anti rattle rings. Unfortunately it wasn’t as easy to break open as yours were, and I didn’t have the soft vise lining, so my pistons have a few scuds and mars. Nothing major. Looks more cosmetic then harmful. Do you think I would have any issues if I went ahead and installed the pistons? Can I maybe hit it with some fine sandpaper to smooth it out? Thanks for the vids
Great job wish we could have heard the actual vanos rattle before you started. I have a stumble on my 04 e60 six speed at higher rpm almost like a slight buck or hesitation you can actually see the rpm gauge stumble been to dealer multiple times had engine ECU reflashed by dealer for some puma repair did not work same issue, no codes related to this anomaly, any ideas new coils, plugs. I and dealer seem to be at a loss, and can you do a segment on the e60 self steering head lights I have the dreaded blinking green light on dash, i replaced the module in the glove box but still same issue could be module under light but would like to know which one and how to test or what to look for in the programming tool I can make them move in test mode with software but not when car is started and light on thx in advance love the channels
Great vid, I've got the N42 engine, do you know if the vanos is the same unit as I'd like to give this a go, I'm having a very slight rattle on start up
Thanks for this vid bro. Anybody have any recommendations on how to loosen the clutch fan off the water pump? Mine seems to be welded on there, it doesn't want to spin off at all
If it's been a while it needs force. Better to have the special tools required thin spanner/pully holder. If it wont' budge (remember it's reverse thread) then you need to use brute force whack. Careful not to damage hoses etc
I have a oil leak (not from valve cover) dripping on the exhaust solenoid bottom radiator hose closet to the thermostat could this be the vanos gasket and or solenoid oring or position sensor(asking if could be any of them 3) or a possible other area to look
Could be the metal gasket, could also be the supply line. Easiest way to tell is to power wash the area, add dye, and then trace it with a black light.
i always love ur videos!! you made it so easy for me to take off my manifold. i was so intimidated. i’m still learning with my 330i m54 , but i wanted to know what is this fix for? what does it do? i know i’m a noob @shoplifetv
Hi , I did rebuild the vano on my E39 .... while the vano unit was removed I used a spanner and turned the crank a few turns...to many maybe 🤔, and the right spindle gear came out🥺, I have managed to put it back .... should I be worried before refitting the vano unit? Thank you
Ya u cannot turn the engine when vanos is removed if u do u mess up the timing. There's no need to rotate the engine when removing and installing the vanos unit
My tech question first: Doesn’t cranking the engine with ignition coils pulled off the spark plugs somehow damage or at least endanger the ECU or the coils due to „unused“ / un-grounded high voltage? Or did you mean to disconnect them from the engine wireing harness? But now the credits: Wow man, you are really making great how-tos! For all those who use them when repairing stuff themselves, a collection of the mounting torques applied would be great! Maybe within a list in the „description below“... Thanks a lot from Munich/Bavaria! Markus
@@mikutv1 That's if the coils are plugged in via the harness and not on the spark plug. If the coil is on the plug and not plugged in via the harness, no problem.
Hi I’m having problems with my e46 325 msport saloon 2003 the problem is with my clutch so at first gear pulls like it should and then up gears it slips so I’m kind confused is it my clutch or something else ??
M54/M52TU Vanos Kit:
click.linksynergy.com/link?id=BZfgVZ7JGM8&offerid=580643.14009144654&type=2&murl=https%3A%2F%2Fwww.ecstuning.com%2Fb-ecs-parts%2Fecs-m5x-dual-vanos-rebuild-kit%2F012017ecs%7Edk%2F
These videos take a long time to film and edit, but I hope I get to help a lot of you. You can support me by buying from the links in the description, becoming a channel member using this link: ua-cam.com/channels/5jnm5CEnLSEmoQ-ktgAj6g.htmljoin, buying my merch on www.shoplifetv.com , following my vlog channel: ua-cam.com/users/shoplifevlogs ,or just subscribing and liking the video! Thank you! Let me know if you have any questions!
Thanks for the video...
But how the hell can i order only to "ring" set from your link 😅 site dont work well.
@@JohnLaden Yeah. I only need the seals LOL
Great channel bro,hey i'm in México and own a 2001 BMW 320i Made here un Mexico. Will this vanos kit fit My car?
Did you seriously just install those rattle kits dry?
Qq❤qqq
This is the best DIY I have seen on this procedure. Thanks for explaining everything step by step.
Thank you for watching!
I keep seeing something about VANOS timing tool. What is it for ND is it necessary, I didn't see him say anything about it or use it?
It would be the best if he used the correct torque specs for EVERY bolt and nut
Greetings from South Africa.
Your channel and dedication are the main reasons my 2004 320i have not been to a dealership or shop for many years now. Because of you I have been able to DIY all key issues and continue to drive my car without hesitations or concerns.
Thank you Ankur !!!
That's awesome to know! Glad I could help :D
Just a small note: at 27:06 you mention 6 ft-lb but according to BMW TIS it is 10Nm which equals to something slightly above 7ft-lb :) In case anybody doesn't know why it is important to stick close to OEM torque specs - thermal changes stretch materials and if you have your screw too loose it may slowly unscrew itself and if too tight it may snap off. There are tolerances on everything so you don't have to be exactly 100% spot on torque specs but the closer the better of course :)
TIS SOURCE:
4AZ Linksgewinde:
Passschraube für Hydraulikkolben an Zahnwelle
M52TU / M54 / M56 M6 10 Nm
*My personal offline TIS is in german but in this case you don't need a translation
And at 28:04 you mention "nice and tight" as a torque spec :) if you don't mind me translating that sentence into a number then it would be 50Nm which is quite a lot
TIS SOURCE:
3AZ Verschlussschraube an VANOS-Verstelleinheit
M52 / M52TU / M54 / M56 / S52 / S50US / M50 / VANOS M22 x 1,5 50 Nm
PS: There used to be a few online TIS versions but BMW did a great job at shutting them down completely and there will problably never be another one. There was a lawsuit in Germany during 2020 that demanded access to all the torque specs and DIY related information for car owners that did not wanted to have to visit a mechanic to repair their own bought cars and BMW (and basically all car manufacturers) had to make it accessible. And they did but of course in a BMW sort of way. At BMW everything costs extra. One day you'll probably have to pay for a "welcome" greeting upon your entrance :) You can buy a one day pass, a monthly pass or a 365 days pass. None of those 3 are in the "I am a DIY person" price range so don't even bother to check it. If there ever will be an online TIS again it will most likely be down very soon.
Thanks for the correction! Definitely sucks that BMW took down TIS. Luckily there are still many available offline version downloads.
Thanks for the clarification 👍 👌
a bit late to the party here, I have used the Haynes auto fix online manual for torque specs. Its nice and handy and not badly priced.
Salute to you 🙏🏽 ❤️
Completed the job and decided to just start the car - no drama. No EML, no hiccups, nothing but smooth running.
Now to wait for the seals to bed in!
So to be clear, you just started the car as usual, same as you would after an oil change. I am thinking that if you use some oil on assembly of the bearing and anti rattle spacer you should be fine.
Thank you I am trying to be doing this to my 03 e39 530i this weekend. My oil hose had a crack in it and crumbled when I tried to take it off. Vacuum lines were brittle and had to replace a few after crumbling. The disa valve needed a rebuild. Cleaned pretty good now just have to take off the fan clutch and go to town. Thank you again great channel
thanks so much for the video i did my vanos seals yesterday was easy after watch your video and the difference OMG.
Perfect timing i just order a rebuild kit and then you upload a video😩😂✌️ im so thankful right now
Yes!!!
Very thorough, and good at explaining. My kind of guy!
Another awesome tutorial by the BMW master! Thank you, that is my next job and will surely play this video while doing it! Thanks mate, you’re a legend!👍🙌
Thank you Franco! Support from people like you keep me going! Hope my videos continue to help you in the future!
Also not noted in video is Bearings should be slightly lubed and you should always bolt the pistons back onto the cams and make sure they spin with little force If not use sandpaper to sand down the spacer between bearings and recheck. Spin each one counter clockwise. They should spin with very little force not spin it and it just keeps going like a fidget spinner then spacer is too thin which will cause rattling. After confirming this then put pistons back into the Vanos case and install on engine. By not doing this step it can cause performance issues and check engine light to come on.
Brother I have a 2000 328 and was debating on how to do this job and I’m happy I watched your video 👍👍 I decided to spend more for the rebuilt unit and it was a easy diy but pricy 🙃
Yes awesome! I’ve been waiting for your version of the Vanos Seals and Rattle Kit for M54!
I’m so happy you made this video. Haven’t even watch it yet
Thanks man! Happy to help
Awsome. After 4years & 60000miles mines need to be done again. This time I'll do rattle kit as I'm having the marbles in a can sound.
Your DIY videos have been so good for years anyone following simple instructions can do it!!! Thank You!!!
Just about to do this job and this is the best explanation I’ve watched. Great stuff from Aus.
This was the best video I have seen about this! Thanks for explaining everything!
Glad it was helpful!
Very good and detailed double vanos DIY guys. Big shout out to you!
another great video cheers @shoplifetv! Appreciate all the e46 m54 videos you do it makes life easier when it comes to doing the work.
Best DIY I saw.. want to ask my e46 is cranking, but it won't don't want to start the petrol pump petrol but no start.
Thanks for listening to me!! 😊
Great video as always!
Thank you!
Very good. It was simply explained, quick and easy to follow.
Hi nice video ! So you dont need to set the engine at tdc or block the engine ?
Good job, best I’ve seen on this issue.
Fantastic video , extremely informational and informative. Thanks greatly
Thank you man help me out so much from Australia 🇦🇺
I feel very confident very well put together vid bro
awesome! glad it worked out
Great video thank you so much ! What do you mean by resetting adaptations ?
instead of not installing the coil packs to pressurize the vanos, pull the fuel pump relay so you're not spraying gas in your cylinders
Where do I find it... let me do that. Just changed the vanos unit. Tried to fill it with oil 🛢 and ended up spilling it on the belts and hoses. Cleaned that off with hot water and dishwasher detergent...
Great video best diy I’ve ever seen
Thanks Edson!!
Did I miss the bit wear you cleaned the vanos solenoid, I think you said you'd do that?
love you for this, had the parts ordered for a month!
hehe i've just did it on my E60 with M54B22. Sadly i could not get the vanos piston open so no rattle kit, maybe some day later.
@27:00 makes me laugh every time, trust me my inner boaterness is always on tap when i dont want it to be lmao XD
Is it worth changing the timing chain tensioner whilst the Vanos unit is off?
this is the best ive seen i ,an ,hange a wheel ,now i ,an do a vanos for sure .
YOO shoplife !!! You should do the shifter bushings rebuild there’s no one that provides depth in the build like you do 🙏🏽🙏🏽 thank you for the content
I am about to do this job, but seals only - there is no rattle, but my engine struggles at low revs and my fuel economy is way down.
How does it compare to other jobs, as far as difficulty? I've done the CCV (the lazy way, but I did the valve cover gasket at the same time) and the oil filter housing gasket already...
You should have been a teacher. excellent video.
Hahaha the editing makes me seem like a better teacher than I am lol. All thanks to Selena!
ive been waiting for this for a while thank you
Thanks for such a detailed explanation.Good job man!
Steps worked perfectly for me. Now how to reset adaptations? There are about 5 different ways online. PA Soft resets DME, but not sure I want to do that with a custom tune.
Very well detailed diy. Thanks for sharing.
Thanks for watching!
How do you remove the torque 30 bolts if you break the bolt? @shoplifetv
Note from Beisan Systems: "If a bolt breaks, continue removal of vanos from engine. Once vanos is removed remaining bolt in splined shaft can be easily unthreaded (pick tool), left hand thread."
Great video dear , very informative.. I'm doing it soon
Let me add some things. Lubricate all parts with Mobil 1 synthetic oil. Never put together dry! 2nd, I measured the thickness, (bushing) the replacements are .005” thinner. There was a lot of play in the old ones. Tightening up the stack a bit. Less rattle. Use small exact knife to cut seals on an angle, be careful, take your time. Rock the knife slowly. Oil outer seals and run under hot weather from the sink. Rotate 90 degrees while trying to put in grooves. This way stretching evenly. It will pop in place, more oil needed here. Damage is done on rebuilds in the 1st minutes of starting the vehicle. Always lube, takes a minute to get oil in the lines. Just sayin! Buy Beisan sys seal kit. Go slow!
Watching him install the rattle kits dry was just painful.
Good video, idiotic application of so called skill.
Great walk through! Although torque specs would have been nice to put in.
Yeah need torque specs!
Your a human,feel you too a normal torque
Hi very nice and helpful video 👌 . I've trying to find where is the problem with my car . So , no errors in ECU car is lack of power seems like is struggling from low rpms . Was done : air filter , sprak plugs , disa valve, air mass , fuel filter , ccv . No difference at all. Any suggestion mate ? Thank you . M54B25 ENGINE
Great Video, thank you very much!
Thank you!
You think you can do a DIY on the m62tu vanos seals & rattle fix ?
You should show how to install a turbo lol you make everything look so easy
Most Excellent.
Thanks man! Always nice seeing your comments
Awesome 😎😎
Thanks Samuel! :)
love your videos!! Very Helpful!
Hi how did you clean the vanos unit? Looks great
Love it ! The best explanation ! THANKS Guys !(:
What about cleaning the VANOS Solenoid ?
Thanks man! & i will record that video
ShopLifeTV awesome !(;
cool video. i have to do this to my car as my vanos seal is leaking oil.
Great video and steps. You mentioned cleaning out the Solenoid(s). Mine are full of thick and dirty oil, which I'd like to remove. What's the best procedure? Thanks!
Which adaptations are you talking about clearing ? And what tool is best to do that ? I have a creator scanner , will that work
Oil on the rubber hoses is a bad thing, right? Which is why you make sure to tell people to take precaution to not get oil on them or clean them if they do. But what is a good way to clean oil from rubber hoses? Is there some sort of spray we should use? Just wiping it will still leave a film of oil and I imagine that's not good. Thanks!
Nice video man perfectly explain
Hi I’m hoping you could shed some light on a issue I’m currently trying to figure out and I’m really hoping it’s not what I think it is that is giving the issue so here it goes i recently bought a 2005 X5 4.4i v8,the gut I bought from said it’s been sitting for 5-6yrs winter/summer here in the Illinois state. I started the vehicle let idle for Atleast 45mins or more and I noticed there’s a coolant leak from from the overflow tank I replaced the tank n I see that the temperature gauge on the dash is all the way in the red zone as if the vehicle is overheating but I’m not getting any heat in the inside and even the radiator fan is not on what do you think might possibly be the problem with it
Excellent video.
Your vids are excellent mane, gracias.
Hello. I snap both my lht camshafts bolts. Any idea how remove them ? Thanks 🥲
Very well done video thanx very helpful.
Great video! Is there a rebuild kit for 2009 x5 e70? Cant find it anywhere😓
¡Gracias!
No problem!
Did you have to lock the engine as if you were doing the timing ?
Excellent clipping. Is DIY possible?
How do y’all feel about the eBay rings and anti rattle parts? I already have the solenoid and oil return lines etc replaced from fcp euro parts but the vanos rebuild kit comes with everything for like $1200 🥴 the rings and springs etc on eBay are less than 100
I picked up a pair of vanos pistons at the junk yard and basically rebuilt them with the new o rings and anti rattle rings. Unfortunately it wasn’t as easy to break open as yours were, and I didn’t have the soft vise lining, so my pistons have a few scuds and mars. Nothing major. Looks more cosmetic then harmful. Do you think I would have any issues if I went ahead and installed the pistons? Can I maybe hit it with some fine sandpaper to smooth it out? Thanks for the vids
Great video
Great job wish we could have heard the actual vanos rattle before you started. I have a stumble on my 04 e60 six speed at higher rpm almost like a slight buck or hesitation you can actually see the rpm gauge stumble been to dealer multiple times had engine ECU reflashed by dealer for some puma repair did not work same issue, no codes related to this anomaly, any ideas new coils, plugs. I and dealer seem to be at a loss, and can you do a segment on the e60 self steering head lights I have the dreaded blinking green light on dash, i replaced the module in the glove box but still same issue could be module under light but would like to know which one and how to test or what to look for in the programming tool I can make them move in test mode with software but not when car is started and light on thx in advance love the channels
Great DIY!!!
Nice video!
Great vid, I've got the N42 engine, do you know if the vanos is the same unit as I'd like to give this a go, I'm having a very slight rattle on start up
Thanks for this vid bro. Anybody have any recommendations on how to loosen the clutch fan off the water pump? Mine seems to be welded on there, it doesn't want to spin off at all
If it's been a while it needs force. Better to have the special tools required thin spanner/pully holder. If it wont' budge (remember it's reverse thread) then you need to use brute force whack. Careful not to damage hoses etc
@@98ron I have both special tools. It needs something more
Thank you sir!
Why are the other videos on rebuilding the double vanos show brown ring first then black ring over it. You did the opposite?
should the air inside the pistons be purged?
A quick question: do you need to put it at TDC prior to removal of the Vanos system?
No. That would only apply to the S54 (M3) engine.
Thanx for posting this video. Its very good and professional..
Regards anders
I have a oil leak (not from valve cover) dripping on the exhaust solenoid bottom radiator hose closet to the thermostat could this be the vanos gasket and or solenoid oring or position sensor(asking if could be any of them 3) or a possible other area to look
Could be the metal gasket, could also be the supply line. Easiest way to tell is to power wash the area, add dye, and then trace it with a black light.
Why dont you have the metal gaskets between the piston cap?
@ShopLifeTV on 16:11, Aren’t you supposed to torque the 24mm Vanos piston cap? And to what torque?
Where did you get the Teflon o rings from?
Very good job 👍
i always love ur videos!! you made it so easy for me to take off my manifold. i was so intimidated. i’m still learning with my 330i m54 , but i wanted to know what is this fix for? what does it do? i know i’m a noob @shoplifetv
Great video!
Hi , I did rebuild the vano on my E39 .... while the vano unit was removed I used a spanner and turned the crank a few turns...to many maybe 🤔, and the right spindle gear came out🥺, I have managed to put it back .... should I be worried before refitting the vano unit? Thank you
Ya u cannot turn the engine when vanos is removed if u do u mess up the timing. There's no need to rotate the engine when removing and installing the vanos unit
Do you have to drain the whole engine of oil before you start this?
ASAP DART you've probably already did it but for anyone else wondering this, no, you do not.
Love this video
My tech question first:
Doesn’t cranking the engine with ignition coils pulled off the spark plugs somehow damage or at least endanger the ECU or the coils due to „unused“ / un-grounded high voltage?
Or did you mean to disconnect them from the engine wireing harness?
But now the credits:
Wow man, you are really making great how-tos!
For all those who use them when repairing stuff themselves, a collection of the mounting torques applied would be great!
Maybe within a list in the „description below“...
Thanks a lot from Munich/Bavaria!
Markus
No some unburnt fuel will remain and get a check engine light but no damage
I’ve heard it might damage the coils.
It's easier and better practise to pull the fuel pump fuse
@@mikutv1 That's if the coils are plugged in via the harness and not on the spark plug. If the coil is on the plug and not plugged in via the harness, no problem.
What's your tak on the x8r kit from the UK?
Exelente.gracias por compartir.saludos
Anyone do this on the Z4?
Hi I’m having problems with my e46 325 msport saloon 2003 the problem is with my clutch so at first gear pulls like it should and then up gears it slips so I’m kind confused is it my clutch or something else ??
Hi. Sorri. I have a BMW E46 Mator M54 dropping equal to the oil, but there is no smoke from the exhaust, tell me what to do?