Thank you for the video. They have made the EGR valve much easier to access on this OM642 than the earlier ones. My Jeep has the OM642 and the EGR valve is at the rear of the engine. It is a nightmare to get at.
Thank you very much Mr kits but i have my question. How do i get the ECU pin outs of cars (Toyota car engines 1zz,1kz,2kd,1kd,1nz,2zr,1gd,2gd,) and wiring diagrams
@@KITS_Auto_and_Truck_Repair can you please help? I have a 2010 Freightliner Mercedes Sprinter Van 2500. Just learned that the previous owner disconnected the SRS from the computer. The CPU is tampered with. I want to know if I correct this issue and have it reprogrammed will this negative impact my van? I'm not sure why someone will disconnect the computer in the first place? What are they hiding? Any advice would be great! I just need some answers before I decide on what I should do next. Thanks in advance.
Thanks, I am a DIY home mechanic/tech and I have never replaced an EGR valve before. This would give anyone confidence in repairing modern vehicles.🦋 Just curious, how much is that new OEM EGR valve cost - you don't have to give a figure, just an indication was it cheap, average or quite pricey. Back in the day, most Mercedes-Benz OEM parts were as cheap as chips!🐞
You never mentioned the check engine light being on nor if it clears on its own after the new egr was installed. Im replacing mine now on my 2015 with 130,000 miles, hope this fixes the check engine light issue as 3 codes say its egr issues, cleaning didnt fix, now trying new aftermarket at cost of $283.00 cant afford the dealer cost of $800+. As this still may not fix issue, seems to be a guessing game sometimes with these sprinters, even the dealer has done other repairs and got it wrong, so had to limp mode back to dealer. Thanks for the vid though it was helpful.
Thanks Mr kit for teaching us ❤. keep it up
@user-go2td4hg8o My Pleasure! Thanks
What may I ask should you expect from the engine performance with an EGR valve not functioning correctly? Great illustration… thank you
@commshopctr My Pleasure! a Defective EGR valve can cause rough idle, low boost codes and DPF Regen issues etc...
Is that a diesel engine?
Thank you for the video.
They have made the EGR valve much easier to access on this OM642 than the earlier ones. My Jeep has the OM642 and the EGR valve is at the rear of the engine. It is a nightmare to get at.
@Nick-bp7jf My Pleasure! Yes this EGR Valve is pretty easy to replace!
Very good and informative one. From South Africa
@wsnxumalo6707 Thank you my Friend
Helpful video! Thank you. Do you have a video on how to test it, which you did off camera on this one?
@TheDaviddut My Pleasure! not yet, we will update the EGR Valve testing video soon!
Thank you very much Mr kits but i have my question. How do i get the ECU pin outs of cars (Toyota car engines 1zz,1kz,2kd,1kd,1nz,2zr,1gd,2gd,) and wiring diagrams
am requesting for reply sir
@ssentaayiakram2476 My Pleasure! you can get wiring diagrams online from mitchell prodemand!
I have two codes for Freightliner 2010. P213 and P672. No transmission codes however I have jerk and stall sensation sometimes. Can these be related?
@NoSkyLarking888 Yes, check your accelerator pedal sensor
@@KITS_Auto_and_Truck_Repair can you please help? I have a 2010 Freightliner Mercedes Sprinter Van 2500. Just learned that the previous owner disconnected the SRS from the computer. The CPU is tampered with. I want to know if I correct this issue and have it reprogrammed will this negative impact my van? I'm not sure why someone will disconnect the computer in the first place? What are they hiding? Any advice would be great! I just need some answers before I decide on what I should do next. Thanks in advance.
I’ve seen other videos where they just dissemble and clean current EGR valves. Are you not a fan of cleaning?
@MichaelWilliams-ro9bm No, it only works temporarily
Did you have to program the EGR valve
@carloscalderon5548 No just plug and play, but some models require a teach in process
Thanks, I am a DIY home mechanic/tech and I have never replaced an EGR valve before. This would give anyone confidence in repairing modern vehicles.🦋
Just curious, how much is that new OEM EGR valve cost - you don't have to give a figure, just an indication was it cheap, average or quite pricey. Back in the day, most Mercedes-Benz OEM parts were as cheap as chips!🐞
@mohabatkhanmalak1161 My Pleasure! I'm glad to hear that the video was helpful! This OEM EGR valve is pretty pricey!
Your videos are great.
@keenedgedesigns Thank you!
Hello Kit, I have one question, Does Mercedes Benz (S-500/ 2001) have radiator fan control module, and Where is it located? Thanks.
@mckinleysov2677 The fan on that model were commanded by a relay!
Hello Kit. What problem with radiator fan doesn’t turn on, when I turn car on? Thank you so much.
Do you have any clip for leaking DEF tank ? Thanks
@VinhPham-rv3lv No I don't
What was the code # for the egr valve? Thanks bro, for your videos
@manuelm.2692 My Pleasure! The code was EGR Valve position sensor circuit open
what about the retraining procedure?
@michaelvarga7108 What procedure?
nice video. greetings from germany
@olpeman Thank you!
Thank you good video.😊
@timmytran2616 My Pleasure!
Thanks bro
@ukiemanserg5163 My Pleasure!
Nice Job...
@jerrycornelius3397 Thank you!
The old EGR valve looked pretty good. The fins had good spring tension…..why did you replace it?
@_Micali the position sensor in the valve failed!
Good job bro❤❤❤
@Carxpert6786 Thank you!
great video thanks bro
@CharlesCharles575 My Pleasure!
You never mentioned the check engine light being on nor if it clears on its own after the new egr was installed. Im replacing mine now on my 2015 with 130,000 miles, hope this fixes the check engine light issue as 3 codes say its egr issues, cleaning didnt fix, now trying new aftermarket at cost of $283.00 cant afford the dealer cost of $800+. As this still may not fix issue, seems to be a guessing game sometimes with these sprinters, even the dealer has done other repairs and got it wrong, so had to limp mode back to dealer. Thanks for the vid though it was helpful.
@jasonmiller1730 My Pleasure!
Obviously dont need to pressurize the coolant system again huh?
@chrismillerphotography8359 Nope!
Grasias
@martinarrieta248 My Pleasure!