@@bigchiefer7135 wassup man! Thanks for commenting! Yeah they are here but last night when I got the tube in and was putting it on the rim I punched the tube and now I’m waiting for my next day off from work. To fix it. I ordered new tubes but I think going to a bike shop to get them to do it would be best lol. I don’t want to pop another tube
Very informative. One thing I would note though, Logan Taylor recently put the 3.5x19 on the rear of his and he said it was slightly too wide for the rear swingarm. He had to scrub off a slight bit of the sidewall to make it not rub
Yep I saw he posted that literally the same hour I posted this video. In my video description above I mentioned if anyone wanted to keep it uniform to stick with the 2.75x That's what I ordered as well last night after watching Logan Taylors video lol. Also thanks for commenting man I appreciate it! I think these type of videos are needed more especially for the ERP since it's a newer bike.
I think I was the one you were talking to on reddit😂😂😂, I just went 2.75 on both, the 3.50 are definitely too tall on a 19, they rub that little brace bar in the rear on the swing arm, youll have to shave the top knobs down a little bit, if you want a 3.50 in the back get a 17 wheel
Thanks man definitely did already and I check it each day before I ride. I’m starting. To hear a rattle though like the battery has room and is moving around. I ride it a little more rough than most but still
Yes it is! I personally went with the 2.75 for both and now it's just a waiting game until they come in! I'll be doing an install video and showing them off. How do you like the Talaria xxx?
@@wc707welder Absolutely! Just be careful because these are not tubeless tires! But I'll be running the 2.75 on both front and end! I'll be doing a How to swap tires video once they come in!
@@monkata1687 so they are not tubeless meaning these type of tires need the inner tube inside of them. I’ll be using the inner tube off the stick one for these ones. Don’t worry I’ll post. Video soon.
Fml bought the 3.5 and it rubs way deep into the chain. Do not make my mistake. With mounting costs and the cost of the tire, im out over 100$ and countless time
Dude please delete this video and your post on Reddit. Your description still says the best tires for the rear are the 3.50. They don't fit and I just wasted a bunch of time and money trying to fit this damn tire
Sorry that happened to you man. I did specifically say IN THE VIDEO what I got and I matched the tire sizes to the MOST appropriate ones it comes with in stock. And if you got the 3.50 it will still fit bro. It will chafe against the chain a little that that will go away with time. You’re not the only one with the 3.50 on these guys. Watch Logan Taylor’s videos he got the shinkos in a 3.50 size.
you're bike looks exactly like what im going for with mine haha. already have the white pegs but the handlebar was out of stock. what fork guards are those? the KKE's it comes with are kinda ugly
Correction: I got the Shinko 241 in the 2.75” for both front and back. The 3.5 will work but it will grind. My bad.
So 2.75 has better fit for the rear than 3.50?
I bought the 3.50😢
Just got my 2.0 3 days ago. Absolutely phenomenal bike.
Hell yah brotha! How awesome!
Tires comes in yet? Waiting on that video to drop! Just ordered my 2.75x19 front and 3.50x19 rears
@@bigchiefer7135 wassup man! Thanks for commenting! Yeah they are here but last night when I got the tube in and was putting it on the rim I punched the tube and now I’m waiting for my next day off from work. To fix it. I ordered new tubes but I think going to a bike shop to get them to do it would be best lol. I don’t want to pop another tube
@@bigchiefer7135 wait hold up. The back tire you went with 3.50?
@@bigchiefer7135 I think it’s going to rub man.
Very informative. One thing I would note though, Logan Taylor recently put the 3.5x19 on the rear of his and he said it was slightly too wide for the rear swingarm. He had to scrub off a slight bit of the sidewall to make it not rub
Yep I saw he posted that literally the same hour I posted this video. In my video description above I mentioned if anyone wanted to keep it uniform to stick with the 2.75x That's what I ordered as well last night after watching Logan Taylors video lol. Also thanks for commenting man I appreciate it! I think these type of videos are needed more especially for the ERP since it's a newer bike.
I think I was the one you were talking to on reddit😂😂😂, I just went 2.75 on both, the 3.50 are definitely too tall on a 19, they rub that little brace bar in the rear on the swing arm, youll have to shave the top knobs down a little bit, if you want a 3.50 in the back get a 17 wheel
Haha most likely!
You should zip tie the front brake cable so it doesn't rub against the wheel
Thanks man definitely did already and I check it each day before I ride. I’m starting. To hear a rattle though like the battery has room and is moving around. I ride it a little more rough than most but still
Love my shinkos 2.75 front 3.00 for the back on the Talaria XXX. I know for fact the 3.50 is too big for the back wheel on the eride pro
Yes it is! I personally went with the 2.75 for both and now it's just a waiting game until they come in! I'll be doing an install video and showing them off. How do you like the Talaria xxx?
Will the 2.75 still fit on the back? I didn’t buy a bigger size for the back and I have the same setup as this video 🤦🏻♂️
@@wc707welder Absolutely! Just be careful because these are not tubeless tires! But I'll be running the 2.75 on both front and end! I'll be doing a How to swap tires video once they come in!
@@Trauma_Titan what do you mean they are not tubeless tires? can i install them with the stock inner tubes
@@monkata1687 so they are not tubeless meaning these type of tires need the inner tube inside of them. I’ll be using the inner tube off the stick one for these ones. Don’t worry I’ll post. Video soon.
getting 241’s soon any suggestions should i get 2.75 in the rear or 3.5?
2.75
Do NOT get the 3.50. Not even close to fitting..not sure why he still recommends the 3.50 in his description
Fml bought the 3.5 and it rubs way deep into the chain. Do not make my mistake. With mounting costs and the cost of the tire, im out over 100$ and countless time
2.75-19 on the 241 if you don't want and contact with the chain.
Tire change video?
Will this be the same for the 244s
Yes it will be! great question. The 244's will be the exact same but what really matters is the width of the tires.
Dude please delete this video and your post on Reddit. Your description still says the best tires for the rear are the 3.50. They don't fit and I just wasted a bunch of time and money trying to fit this damn tire
Sorry that happened to you man. I did specifically say IN THE VIDEO what I got and I matched the tire sizes to the MOST appropriate ones it comes with in stock. And if you got the 3.50 it will still fit bro. It will chafe against the chain a little that that will go away with time. You’re not the only one with the 3.50 on these guys. Watch Logan Taylor’s videos he got the shinkos in a 3.50 size.
you're bike looks exactly like what im going for with mine haha. already have the white pegs but the handlebar was out of stock. what fork guards are those? the KKE's it comes with are kinda ugly
3.5 inches is not 80mm it's 88.9mm
Who said that?!
@@Trauma_Titan these are chit tires for off-road. Not bad for Flatlanders though! Those handle bars look fknstpd though! 😂