THANKS BOSS ! i've tested it today and it workes , with a 16 channels hikvision. i'm happy that i made this achievement. small note : the serial number in sadp program have added some more text , so you should remove the additional text and writte the same number as showen in the dvr.
Thanks a lot for video it worked perfectly actually when I went on site n copied serial number to website my DVR changed to correct date so only had to enter code it got me in and changed my password thanks a lot bud
Hi Jason, thank you for this video. When I follow this procedure, my login dialog has "forgot password" in the bottom left corner. I'm not able to double click to get the code. Please advise
Hi. You might have a newer model so you will need the Sadp tool to change the password or if you have it on the Hik-connect app. You can reset the password on the app. If you need the Sadp tool, it's on my website jasonchannel.com/hikvision
@@JasonTech thank you for your response. I have used the SADP tool and have the serial number and secure code but am not able to access the dialog as in your video above to input the secure code.
That just means you have a newer recorder. So the video method will not work for you. In the Sadp tool, hit forgot password and it will give you 3 options.
In the bottom left corner i have a button for i forgot password After i pressed it it says verify by guid or security quiston i dont have a security quiston what can i do
Hi Jason, Thank you for the video, I have a question though mine has a question mark with forgot password written where you mentioned there should be a hidden button.any ideas ?💡
@@classyclickstudios4653 There is a tool SADP on the hikvision homepage, with this tool the system data is read from the NVR, and you send this by email to Hikvision support, after 1 day you will receive a RESET FILE of this you play via sadp tool in the NVR, if you have done everything correctly you can enter a new password. Attention after receiving the RESET FILE you have 12 hours to apply it. There are enough examples here.
There has to be a way to factory rest via hardware on the newer ones lile i bought and came already locked. A jumper wire or two or 3 and a switch to turn all on at same time or vertain sequence.
Very helpful video thanks. I’m struggling with getting email notifications it says connection to server failed also when I press test for email notifications it says check parameters or network do you have a video on this?
Hi, The date that are talking about, can you please clarify what date are you talking about, is it the date time stamp or date of original activation, Look forward to your reply
Hii Jason, nice video, but i have one problem. When I do all this according to the video, I find the security code, click ok, and it just says that the code has been reset. I don't have a window that pops up to enter a new password.
When I click forgot password it takes me to a different screen, and then I get a message saying storage device not found or damaged. It has a ssd in the dvr so im not sure whats wrong
It depends of the firmware. The only works on the older recorders with the old firmware. The newer recorders, you have to contact Hikvision. www.hikvision.com/ca-en/support/password-reset/
If this doesn't work, then you have a newer model. You will have to contact Hikvision display.hikvision.com/en/support/how-to/faq/how-to-reset-password/
@@JasonTechhey Jason thanks for this video. I have a DVR 204G-F1. I need to reset the password too. I don't have a hidden button neither just a forgot password button there. Any suggestions please?
In the bottom left corner i have a button for i forgot password After i pressed it it says verify by guid or security quiston i dont have a security quiston what can i do
Thanks bro. .it was very helpful. .its back to default 12345. .then i just made my new pass. .
You're Welcome
Very impressed! We got our system working again. Thank you sir!
You're Welcome
THANKS BOSS !
i've tested it today and it workes , with a 16 channels hikvision.
i'm happy that i made this achievement.
small note : the serial number in sadp program have added some more text , so you should remove the additional text and writte the same number as showen in the dvr.
Glad I could help.
Thanks a lot for video it worked perfectly actually when I went on site n copied serial number to website my DVR changed to correct date so only had to enter code it got me in and changed my password thanks a lot bud
You're Welcome
Thank you so much after long time I have fix my my camera this video is very helpful once again thank you 😊
You're welcome.
Thank you ! You really saved the day!
You're welcome!
A huge awesome THANK YOU.. worked first time
You're welcome!
Thank you so much. I had exactly this problem now it's working very well.
You're welcome!
it really works great 🙂
Great to hear!
Hi Jason if you do not have laptop can you use smart phone to do the setting??
Hi Jason, thank you for this video. When I follow this procedure, my login dialog has "forgot password" in the bottom left corner. I'm not able to double click to get the code. Please advise
Hi. You might have a newer model so you will need the Sadp tool to change the password or if you have it on the Hik-connect app. You can reset the password on the app. If you need the Sadp tool, it's on my website jasonchannel.com/hikvision
@@JasonTech thank you for your response. I have used the SADP tool and have the serial number and secure code but am not able to access the dialog as in your video above to input the secure code.
That just means you have a newer recorder. So the video method will not work for you. In the Sadp tool, hit forgot password and it will give you 3 options.
Thank you I manage to have access my DVR
Glad I could help
Very hekpful, thank you
Glad it was helpful!
In the bottom left corner i have a button for i forgot password
After i pressed it it says verify by guid or security quiston i dont have a security quiston what can i do
Same here bud
da una maldita respuesta no ignores Ami me da el mismo en la esquina sale el signo de interrogación ❓
Hi Jason,
Thank you for the video, I have a question though mine has a question mark with forgot password written where you mentioned there should be a hidden button.any ideas ?💡
You have a newer model recorder. You have to contact Hikvision
Do i need to use the sadp, or is it okay to just write it to the reset site?
You can just write it on the site. But keep in mind, this only works for the older firmware recorders.
Thanks Jason
You're welcome
Very awesome, working 100%%
Thank you!
Lifesaver. Thanks bro :)
Does not work with model: DS-7204HGHI-F1, because this invisible icon is not available, instead direct visible help is offered via support request.
How do you reset in this model
@@classyclickstudios4653 There is a tool SADP on the hikvision homepage, with this tool the system data is read from the NVR, and you send this by email to Hikvision support, after 1 day you will receive a RESET FILE of this you play via sadp tool in the NVR, if you have done everything correctly you can enter a new password. Attention after receiving the RESET FILE you have 12 hours to apply it. There are enough examples here.
@@classyclickstudios4653did you find out, if so help me please
There has to be a way to factory rest via hardware on the newer ones lile i bought and came already locked. A jumper wire or two or 3 and a switch to turn all on at same time or vertain sequence.
On some newer models, there is a reset button on the main board.
@@JasonTech I see a place maybe it needs a jumper or maybe I ruin it
@@Freeknickers24 I have tried it with and without voltage, unfortunately no reaction, you can't break anything.
Very helpful video thanks. I’m struggling with getting email notifications it says connection to server failed also when I press test for email notifications it says check parameters or network do you have a video on this?
I can do a video on this for you. Is there a reason why you want email vs text?
@ to be honest didn’t know you could do text! Would it be possible to do a video for both? Be much appreciated.
Question. What app are you using right now?
@ I’m using the hik-connect app. I get notifications to that but I used to get them to my private email then they stopped
Got it. I would do a video on it
Thank you so much!!
You're welcome
Thanks this totally helped me with an old HIKVISION we got online with no admin passwords or anything.
Anytime.
where the website to get on
Thank you 1000x over
You're welcome!
Hi,
The date that are talking about, can you please clarify what date are you talking about, is it the date time stamp or date of original activation,
Look forward to your reply
The date that your recorder is on ( timestamp).
Thank you
You're welcome
Thanks it 💪
You're welcome 😊
Hii Jason, nice video, but i have one problem.
When I do all this according to the video, I find the security code, click ok, and it just says that the code has been reset. I don't have a window that pops up to enter a new password.
You might have an older system, see if the password was changed back to 12345
Hii Jason I have hikvision DS-7208HGHI-SH DVR but I forgot my password kindly help me out
omg you are a life saving
THANK YOU!!
You're welcome!
Mine is a vanguard 4 channel NVR need help
hey jason. thanks for this .. i entered everthing a few times and generated the the code but it didn't work
Check the date of your recorder.
When I click forgot password it takes me to a different screen, and then I get a message saying storage device not found or damaged. It has a ssd in the dvr so im not sure whats wrong
It sound like it's your hard drive. Do you heard any beeping?
@@JasonTechso what should we do if its the hard drive because mine is beeping
Does it work on DS-7608NI-E2?
It depends of the firmware. The only works on the older recorders with the old firmware. The newer recorders, you have to contact Hikvision. www.hikvision.com/ca-en/support/password-reset/
Factory reset is possible for model DS-7216HQHI-K1
You can factory reset any model, but you will need the password.
@@JasonTech Forgot your password
It does not work with NVR?
can i use smart phone?
Not sure what you mean.
To reset the password? Yes
Hi janso can i have a link thanks
What link?
I need the app tool
Hi please send me the link of the web
Sorry what link?
SADP tool link is broken. So it the one on your website.
hikvision moved it. See here. www.hikvision.com/ca-en/support/tools/hitools/clea8b3e4ea7da90a9/
Hello sir ho reset ip camera plz tell me...?
Help me plz sir
For IP camera reset, see here. ua-cam.com/video/dL8uGqaU4D8/v-deo.htmlsi=o8KLXxGF6iupeEsX
hi boss i cant reset it i follow all your step nut nothing works
If this doesn't work, then you have a newer model. You will have to contact Hikvision
display.hikvision.com/en/support/how-to/faq/how-to-reset-password/
The date on mine is right but it's still saying incorrect
If you look at the top of your camera image, it was show the date and time. Go by that date.
Can't see the link please
What link?
Hii i need help not show button
How can I see date
It's on all the cameras.
Please send me the link
I need the software to rest the password
I need the app tools
Is this what you are looking for? jasonchannel.com/hikvision
Hi
Need help.... How To Reset Your PASSWORD on Akaso NVR, DVR Recorder Thank you.........
What's the model number?
@@JasonTech Thank you sir and problem solved.....
Hello i need soon help
Sure, What do you need help with? What model do you have?
HELLO I NEED YOUR HELP
What's wrong?
Bro i can't find the time on the screen
Then you have to contact Hikvision for the password reset.
2024 funcionando
Hi I have a message on my cctv scree like someone has hacked into it. How can I remove this. Done reboot but it’s still there.
Can you take a picture of the message and email it to me? info@jasonschannel.com
Does not work
Do you have the hidden button? If not, this doesn't work on the newer models.
@@JasonTech I have a ds 7104HQHI F1/N . It’s an older model I believe
No, that one has the newer firmware. Go here. www.hikvision.com/ca-en/support/password-reset/
@@JasonTechhey Jason thanks for this video. I have a DVR 204G-F1. I need to reset the password too. I don't have a hidden button neither just a forgot password button there. Any suggestions please?
Jackson Amy Robinson Jeffrey Taylor Jessica
In the bottom left corner i have a button for i forgot password
After i pressed it it says verify by guid or security quiston i dont have a security quiston what can i do
What model do you have? Some recorders have the serial number under the recorder. Take it down and use the SADP tool.
jasonchannel.com/hikvision