FIBERGLASS BOAT BUILDING FULL VIDEO AMAZING BOAT VIDEO IN AFRICA MADE IN SOM FISHING BOATS
Вставка
- Опубліковано 30 гру 2019
- #somfishing
Almost in F - Tranquillity by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
What an interesting boat build. A boat intended for use in harbor and coastal areas. It is relatively light weight, uses a smaller hp engine of about 7 to 40 hp, has a panga hull form designed specifically for the environment this boat is constructed for and operates in. This boat is not an expensive center console monster horsepower fast boat. It’s an affordable, inexpensive functional utility boat. It can give years of useful service to its owner for minimal cost. And since it has a large amount of foam used in its construction, it looks like it has a good amount of positive reserve buoyancy in case it gets damaged and flooded with water. And when damaged, it will be simple to repair. A very useful and minimal maintenance boat.
Mate.. these boat are professional fishing boats used even 50+ mile offshore, I live in West Africa and we have even more primitive looking timber 12 meter kayak style pirogues with huge timber in the base 12 inches wide and 8 inches deep... the boats are over a tonne and run routinely with 15hp Yamaha outboards... and going usually 20 to 60 mile offshore pulling in Marlin and 5 ft yellowtail tuna on hand lines..(in the right season)... no crazy laws like the western world... but we feed the western world with our fish exports.. 😊 good luck, be happy
Thank you for your positive thoughts and details followed by.
Me pongo de pie y me quito el sombrero son uds unos maestros
Building a simple but sturdy low tech working-vessel with family and food in your mind is a wonderful thing to watch
👏👏👏Excelente trabajo ,me ha gustado mucho ,felicidades por lo bien que ha salido el barco,🚣🏼♂️
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Excelente video gracias brotdr por compartir tus conocimientos y, de manera honesta. Saludos acá es Guerrero México. Dios te bendiga.
So glad to see that somebody in Africa? is running one day classes on boat building, this is the best how not to do it video I have seen.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Release wax is a 【tape】!
Wow~ you are genius!!!
World 1st very thin layer boat!
Great job!
God bless you ♥
From South Korea of far East
고기 많이 잡아서 부자되세요💰💰💰💰💰
Nama hatbawi
thank you very much
I am realy happy to wach your vedio i get lost lessons from your vedio how to build the boat ,and I had stard to build and my boat is done.thankd fir good inspiration.
Very cool guys! I am thinking about making a recycled plastics boat with friends, totally different but if it comes out 1/2 as good as you guys' boat, we'll be elated. Thanks for sharing
Good job... to bad they don’t even clean the area where they work.
تسلم الأيادي ، بارك الله في هذا الشيء القليل
total respect guys , you made a thing with almost nothing welldone
7m8jujm8muj8jujjuj7mujujjuujjuuj7nmuuj7njuuj7nujujujuuumjjjuu8ujuujuujuj7jijuujjuuj7mmuujjujujum7n7njuujujuuj7nujujujuujuujju7mjuuuju7mm7m7n7mm7uj7mujujjujujum77mmum7mujujujujjujum7uuujn7ujm77n7n7mujujujjuiujmuj7mk8i7jmmm7m
@@salimhaji9040 wtf does that mean??
achei muito massa, adoro ver o processo de produção. acho bonito que tem habilidade de fazer essas coisas. ficou muito massa, parabens. Qual o peso final dele voce pesou?
nao e tao dificil fazer algo assim nao cara, o que pesa mais e o preço dos materiais e o espaço pra fazer, de resto o processo e bem simples, a claro, tem que ter um pouco de conhecimento de como trabalhar com fibra de vidro, qual material usar no molde pra desmoldar
Para hacer laminados de mejor calidad es recomendable quitar las burbujas de aire que van quedando al impregnar con la resina con un rodillo metálico que vienen para eso al igual que el molde que cubren con cinta debería estar pulido , brillante, con varias capas de cera y separador como el alcohol polivinilo para que no se adhiera y poder sacar la pieza sin cortar las esquinas, esto es solo un aporte, gracias por el vídeo, buen trabajo!!! saludos desde Uruguay, Sudamérica.
No se dió cuenta que lo fabricaron con lo que tienen a mano? El método es precario y mejorable aún así no deja de ser útil. Usted está hablando de lo óptimo..le aseguro que esa barcaza no sé hundirá y le durará muchos años
Amigo que pintura es recomendable pintar por la parte de adentro y por la parte de afuera gracias
@@user-yr6el3pv3d la pintura ideal es el gelcoat que contiene resina poliester, aerosil (sílice impalpable), pigmento, estireno parafinado, etc., se puede hacer casera o comprarla pronta para usar, no es muy nivelante y el ideal es pintar a pistola por fuera, en el interior a rodillo o pincel, en el exterior primero se pinta el molde y luego de secar se enfibra y la resina poliester debe de ser marina porque es más elástica, saludos
The workmanship by this man (men) to make a seaworthy boat from scratch. Doesn't seem to be stressed out rushed to get it done. That's how real quality is done. I'd buy one from this guy if I could get it back to the States without hassle. I'd even put "made by ____(name), from ___ (country). "
sea worthy it is not; for it does not have a deep vee astern,and will break your bones if slamming on waves; but it will be great for calm waters, it is long and narrow,it will be economical on fuel; i'd be a buyer too
You must not know anything about boat building? I can point out dozens of mistakes, any one of which will result in rendering that vessel un-seaworthy, but I'll just mention the most glaring. He cracked the hull in several places removing it from the mold!
Amazing work with nothing but skill and a few simple basic tools.
Yes, thanks
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Wow. Very impressive!! Amazing quality with so little tools.
Thank you very much!
I is totally impressed with this build video. You did a very good job and I like everything you did to build it. With out power tools and with only simple materials. I wish i could do as well.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
And how strong is it?
@@mohamedsheikh6618 Hi - I think you have the beginning of a strong boat. I would put a second or third layer of fiber glass on it and it would be very much like a commercially made boat. My nephew was in the USN off the Horn and saw these types at sea 30-40 klicks out with 3 or 4 man crews. Yes they are primitive, but all the elements of a boat are there and glass enclosed. I don't think they will last 100 years but who knows. Suggest u look at the videos, especially the one with the 10-12 foot hammerhead shark. Just sayin.
@@mohamedsheikh6618 Fiberglass layered in resin is strong enough to stop a 9mm bullet with only 12mm of thickness. The hull of this boat has at least 50mm, it can hold the weight of about 7 people without breaking. It's cheap, lightweight and safe.
Very nice! They should start upscaling them.
ótimo trabalho, árabéns! além da fibra de vidro, quais são os outros materias usados na construção do barco?
espuma de poliuretano expansiva na formação da estrutura após coberta com resina e fibra
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Fabulous... most people cry and make excuses on why they have nothing ... you made something from nothing and prospered... 👏
They certainly started with some money. Chop strand and polyester resin ain’t free.
Muito detalhado o trabalho de voces parabens.
What they have done is good, but what you wrote I like but I don't understand (muito Obrigado) thanks a lot is it? Here I read muito detalhado, what means?
Trabalho muito legal...só acho q deveriam só limpar o local de trabalho,pelo o q eu vi faz tempo q não é limpo.
Bom dia. Belo trabalho. Parabéns, vocês são inspiradores. Peço permissão para fazer duas perguntas: 1. A espuma foi produzida por vocês, nesse formato parecido com pedaços de madeira, ou foi comprada já pronta nesse formato? 2. A forma original é de que material?
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Ruler naaa... Free hand... Salute to the skill.
Meu imenso respeito e felicidade ao ver isso... Parabéns!!
Bravissimi. Con pochi mezzi a disposizione avete fatto un bel lavoro.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
What a beautiful job it is to raise people!
Good job buddy I enjoy looking at this video thanks for sharing it it helps me a lot from the Caribbean Trinidad i am going to build a fiberglass boat 22feet
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
This boat would be great for the islanders of Australia im from there this style would be great for fishing:)
otimo trabalho eu gostei .
Excelente video, uno de los más lindos que he visto, felicitaciones gran trabajo
thank you very much
I’ve ridden in many many boats that were built like this.
They’re used for everything on the Isle of Cologne in Panama. They’re used like busses for the masses, but on the water.
Rough as hell though. But this may be due to the fact that the guy operating the motor knows one setting, wide open balls out haul ass no matter what the sea conditions.
ua-cam.com/video/7CFO0fHx1Fo/v-deo.html
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ
സബ്സ്ക്രൈബ് ചെയ്യണം.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Интересная технология постройки!
Обычная, из гавна и палок.. не заморачиваются гладкостью обводов. ну, еще навскидку- не усилен форштевнь.. имхо, на бережок носом не вылезешь. да и киль тож. Может и кривовата еще - стапеля не заметил. Зато легкая. Аж просвечивалась до покраски гелькоутом.
Mantap cara buat boat fiber
Good job, Weldon
Saludos desde cancun mexico buen video amigo gracias si sirven de mucho
If you make the tear-off edge sharp you save lot of fuel.
You can just use some filler and sandpaper. It's worth the effort! Cheers
Meu deus fabriquei lanchas de fibra por 7 anos infelizmente estão na idade da pedra ainda mas mesmo pelo fato de serem pauperrimos são muito criativos
It cost $6000 to build this is Somalia
Exelente trabajo los felicito
thats great job working wood project for son they are a blast
It was a beautiful job with little material available ...
Please let us know who you are, where you are and what it is for this boat ... Thank you and congratulations! ...
nice work m8, think i might try an build a boat like a catamaran using your method! keep up the good work!
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
painting the boat mold, use margarine as release wax
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
مع الامكانيات البسيطة الا انك رائع فى كل عملك ..............تحياتى لك
magnifique système D
Sangat membantu
Sukses trus
Everything by hand no power tools amazing
Sander
Nice job bro watching from philippines 6 12 2020 its amazing good job bro
Thanks for watching!
Gostei muito parabéns a todos...
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Nice boat building.
Hola primero quiero saludar de manera amable y desearles lo mejor , les escribo desde buenaventura COLOMBIA
soy fibrero de profesion desde hace muchos años y quiero decirles que en cuanto a la modalidad de trabajo de acá me quedo asombrado de como trabajan ustedes la fibra de vidrio .
ahi muchas fallas pero respecto la forma de trabajar espero mis palabras no sean ofencibas para ustedes yo también son afrocolombiano y me gustaría compartir con ustedes
Not bad for the conditions your working in, with a little extra work with some bondo I think the overall look would be much better!
so beauty tecnoleji thanks frıends.,
Hello Master Som, This is a very impressive video. Thank you! I first saw it in four segments. It's much better all in one. Can you please tell me the size of this boat: length and width?
Thanks and keep up the good video and boat building work.
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
ua-cam.com/video/_-gSbdqRL_c/v-deo.html
Tudo bem contigo
Isso sim eu chamo de barco RAIZ. O resto é tudo nutela, sem recurso e tecnologias avançadas, temos um barco muito bem feito!!!👏👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Thank you
Estou procurando quem me empresta em barco pra copiar, o meu é pequeno
Eu quero saber o nome deste material que ele usou pra fazer as bordas e as cavernas
Se alguém sober bota aí no comentário pra mim ver
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
I think they sell these high quality boats to Somalia pirates.
merci beaucoup, j'ai beaucoup apprit .
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Have to admire the ingenuity
Show de bola
Reading comments i see a lot of people with no talent or skills, these guys are making something with nothing to feed their familys! What have you done?
Thanks for your encouragement, and we try to help people from here
Well said! Take the average western clever dick out of their protected environment and they are like a fish out of water. Most of these critics would be helpless trying to make a living in places like this, but these lovely folks seem happy, relaxed and contented. I love them.
There will always be pointless armchair UA-cam critics, full of their own cleverness and importance but utterly useless when it counts. THESE folk are the people I like and respect, those who make something wonderful from very little except their ingenuity and resourcefulness. And by the way, the organic nature of these boats is part of the beauty of areas like this. I don't want to see hugely expensive, flashy American factory fishing boats, taking all the fish from the sea and leaving nothing for the future, just to make the payments to loan company for the boat. These folk are far wiser than any critics. Bless their dear hearts.
With just minimal aid from technology they can build a quality products. Kudos to all this man.
@@xenu-dark-tony I agree. I love the ruggedness of these boats and the ruggedness of the builders! awesome to see
bagus sekali cara buat cetakan perahunya
Trabalho lindo é esse de vocês. Qual foi a madeira que você usou? Usaram prego ou cola?
normal wood
Hand laid fiberglass way stronger!! Awesome!!
BOA TARDE EU QUIERO SABER QUE PINTURA,,, " USAS EN INTERIOR DE BOAT Y POR FORA",,, DESDE YA MUITO OBRIGO,,,, MUY BON TRABAJO
👌👏👏👏 عاشت ايدك مستر som
Exelente pero pero creo pueden mejorarla por ejemplo en la parte de atrás donde va el motor una cubierta para darle más resistencia a esa zona
Que tipo de madera es?
Why do they work in such a messy environment haven’t they got a simple broom and raise it of the ground for ease of working
Who knows? I'm sure it was not easy to buy those materials and I would like to see them do it right. We poor people often say you can't afford to cut corners. Good luck to them. I hope they stay safe.
I'd say it's sheer ignorance.
Lindo trabalho
thank you very much
Lindo trabajo en un basurero. No entiendo como las personas tienen el valor de trabajar en un basurero y además mucho más valientes en hacer público el ambiente donde trabajan, . La pobreza no es sinónimo de ser cochinos.
well done , and can help africa fishing industry
Thank you very much
Отличная работа!!!!! 👋👋👋💪💪💪Сколько слоев стеклоткани?
Good job!! Looks very tight :)
C'est super comme boulot ! Félicitations les amis. Je voudrais savoir combien de couches de fibres de verre placer pour avoir ce beau résultat ?
Que materiales usaron ?
Thansk for this video. So detail, honest finish with greath.
thank you
Am going to build my self one
excelente trabalho. muito interessante.
Sim, não há muito o que perguntar, que tipo de madeira você usou para a estrutura e como você as colou e como você reforçou os cantos e a frente do barco.
Saudações e sucesso.
El pino es bueno y manejable
Is it safe to handle fibreglass by hand. I think it can cause pain later
Solo me imagine q harian estos hombres con todas las herramientas q usamos en la fibra serian cirujamos inprecionanate
They are SOMALIS very talented indeed
Bonjour vraiment des génies. Dites moi vous travaillez qu' avec du polystyrène ?👍👍👍👍👍👍👍
Yeah
por favor , usen guantes y mascaras !!buen trabajo!!
Fiber glass boat making complete video
ഫൈബർ ഗ്ലാസ്സ് വള്ളം വീട്ടിൽ ഉണ്ടാക്കുന്നതിന്റെ വിശതമായുള്ള വീഡിയോ
ua-cam.com/users/NewOneMedia2017
ഇഷ്ടപ്പെട്ടാൽ ചാനൽ സബ്സ്ക്രൈബ് ചെയ്യണം.
Excelente video me gustaría saber conque material es el que sacan el molde y el líquido con lo pegan , en Español saludos y gracias
hola buenas noches antes de poner las cintas hay que aplicar algo???
Magnificent
Tuyệt vời 👏👍💯.
Fosil mould, still can use for production ..? 😀😀😀🙏🏻
Mantap prosesnya.
whether it's from wood salam dari indonesia
Kapok tree, I think. we call it in Mindanao as Duldol.
Déjà beau travail, mais quelques sponsor devais si penchais dessus, il mérite de meilleures condition, déjà en outillage.
What are the dimensions of this boat? Looks like very sea worthy-
Nice boat mga bai
Pretty clean site.
Felicidades. que gringos ni que ni que armadora
Don't know what to say.... very talented guys )))
I know this place and it's somewhere use to be very beautiful area near the sea in Mogadishu Somalia .it was an area Italian Colonial bosses lived aven before a Civil War...I am so sad to see in that conditions are this hard working peoples.live
Masha allh
What material is used to make the molding of the boat?
Mighty Fine Boat!
Fibra de vidrio con que liquido se cubre y me podían decir si es corcho o tecno tecnopor o alguna madera súper blanda
Make a boston whaler style boat from mould
صناعه بدائيه جدا ... ورشة العمل تشبه مقلب قمامه
New subscriber sir.... Thanks the idea...