I think you shud do an all day class once a year for new and potential tractor owners. You could have Mike and others do a 50 hour service, loader, snow blower backhoe, as well as other implements changes and regen. I think that would make your business a class act. You could improve the class every year and I think people would love it.
The heading mentions removing AND installing the front loader. I only see the removal part. Curious to see how hard it is to line everything back up !!
I agree, fitting together is always harder than taking apart. Get a spud wrench or connecting bar, or something similar. Maybe a brass or bronze bar stock cutoff in case things get locked up and you end up pounding out the bar. Also useful for connecting Ferguson hitch implements.
Brad, I just took delivery of a CK3510 SE HST. I was told that the "C" was just different manufacturer that fabs the loader for Kioti. The KL4030 when compared to the KL4030C has a different mounting system, i.e., mounting brackets are the difference. KL4030 has the latch pin above the mounting bracket (half round mount) where the KL4030C is opposite, latch pin is below the mounting bracket (half round mount). Other sections of the bracket(s) that bolt to the tractor also is different in regard to fabrication, also I noticed charcoal color brackets for the KL4030 and orange for the KL4030C.
@@BossSwanger I don't know if there is any real performance or longevity difference, I am just a new owner, but did a lot of research before making my purchase. I noticed that the "C" model did not have the metal coil protection on the front hoses, where the KL 4030 did. Maybe that's because the KL4030C loader was on a base CH4010 tractor and not an SE??
Just tried to remove mine, adjusted the loader for 15 minutes, couldn't find a spot where the pins would loosen enough to remove. Thinking they put oversized pins in it.
In USA Dollars MSRP: $33,083 on this unit, however it can be purchased for much less ( in the 28k range sometimes depending on current rebates being offered. Not sure where those prices would be in Canadian dollars
Kioti has problems with their fuel injector system the gears on the injectors break and the cost is outrageous price tag. Kioti knew about this problem for 12 years but never had a call back on their tractors. My warranty ran out so it looks like I am into a couple of thousand dollars. the new inject system cost $1400 plus labor. The dealers also know about this problem for years. Never again will I purchase this tractor. DK45HST with 900 easy hours.
White& Black вмене Т-16 з 1984 року старенький дідик но робить непогано но то нетто з ДТЗ мені льбиться той новий де крила задні зварені і ричаги коропки збоку 24 або 30 коней де вихлопна і повітряний фільтр захований під капот
I think you shud do an all day class once a year for new and potential tractor owners. You could have Mike and others do a 50 hour service, loader, snow blower backhoe, as well as other implements changes and regen. I think that would make your business a class act. You could improve the class every year and I think people would love it.
Great instructional video on the do's and don'ts of removing the loader!
Great video ! Ready to remove mine for the first time after watching this.
Always put your website in the description. I want one of these babies!
Normally I do, thanks for the reminder! Going to update that right now!
This is the machine I want. Nice tractor! Thanks Marshall, I will plan on seeing about one like this.
Great! I'm glad my video helped you learn more about the kioti tractors! I will be happy to answer any questions you might have!
Nice work very informative.
Good video, ** gotta move away from the road noise. Thanks
Good informative video! Thanks
Thanks Andrew!
Good idea shoud be mandatory
Great video Marshall!
Thanks guys!
love all your videos !!!!!!!!!!!!!
Very nicely done! 😃👍
The heading mentions removing AND installing the front loader. I only see the removal part. Curious to see how hard it is to line everything back up !!
I agree, fitting together is always harder than taking apart. Get a spud wrench or connecting bar, or something similar. Maybe a brass or bronze bar stock cutoff in case things get locked up and you end up pounding out the bar. Also useful for connecting Ferguson hitch implements.
It's very easy. Put the tractor in Low Gear and drive in.
I have trouble disconnecting the bucket ... any suggestions?
I've got the CK35 but have never taken the bucket off (yet).
Very good
Why did you skip how you detach the parking legs?
FYI It's a lynch pin not a cotter pin.
What is the difference between the KL4030 and KL4030C? Mine came with a KL4030C in my Ck4010se cab
Brad, I just took delivery of a CK3510 SE HST. I was told that the "C" was just different manufacturer that fabs the loader for Kioti. The KL4030 when compared to the KL4030C has a different mounting system, i.e., mounting brackets are the difference. KL4030 has the latch pin above the mounting bracket (half round mount) where the KL4030C is opposite, latch pin is below the mounting bracket (half round mount). Other sections of the bracket(s) that bolt to the tractor also is different in regard to fabrication, also I noticed charcoal color brackets for the KL4030 and orange for the KL4030C.
@@johnmcnally8906 which one is better?
@@BossSwanger I don't know if there is any real performance or longevity difference, I am just a new owner, but did a lot of research before making my purchase. I noticed that the "C" model did not have the metal coil protection on the front hoses, where the KL 4030 did. Maybe that's because the KL4030C loader was on a base CH4010 tractor and not an SE??
@@johnmcnally8906 I have a 2021 CK4010se cab tractor. Came with the KL4030C. Just curious lol
I haven't had reason to completely remove my loader,,but cool if ya can
Just tried to remove mine, adjusted the loader for 15 minutes, couldn't find a spot where the pins would loosen enough to remove. Thinking they put oversized pins in it.
No, its you!
Put some oil on the pins!
Touts the Kioti tractor, wears a Mahindra hat. LOL.
What is the cost of that unit with loader and cab in can dollars
In USA Dollars MSRP: $33,083 on this unit, however it can be purchased for much less ( in the 28k range sometimes depending on current rebates being offered. Not sure where those prices would be in Canadian dollars
Please put it back on.
How much is this tractor?
Kioti has problems with their fuel injector system the gears on the injectors break and the cost is outrageous price tag. Kioti knew about this problem for 12 years but never had a call back on their tractors. My warranty ran out so it looks like I am into a couple of thousand dollars. the new inject system cost $1400 plus labor. The dealers also know about this problem for years. Never again will I purchase this tractor. DK45HST with 900 easy hours.
ROAD NOISE record somewhere else PLEASE
lol yo funny you my man got bitcoin :) Me too! Get into bitconnect it does work!
commit to a real beard
I will ask santa clause for a better beard!
Тракторець те що треба шкода що гршей неможна ніяк заробити щоб купити
Іван Зозулинець ..,ну та, купити всі можуть, але вот хтось би подарував.....!
Іван Зозулинець факт! Жена то ще той подарок....
Я на такому агрегаті працюю, просто фантастика!!! ДОРОГА...
White& Black но то не наш Т-25 або якась китайська штамповка
Іван Зозулинець я маю в дома дтз244 вірою і правдою служить 7років. Но працює 3 тижня, потім віддихає 3-4 місяця.
Але все одно нема про говорити...
White& Black вмене Т-16 з 1984 року старенький дідик но робить непогано но то нетто з ДТЗ мені льбиться той новий де крила задні зварені і ричаги коропки збоку 24 або 30 коней де вихлопна і повітряний фільтр захований під капот
You need to get yourself better audio before you make another video. Not even up to amature level.
Oh man, I don't like that at all! So very easy to take out the hood or worse. Not a great design :(
They are all basically the same!