Wiegman4x4.eu Toyota Land Cruiser BJ73 BODY-OFF for 1HD-T engine swap

Поділитися
Вставка
  • Опубліковано 8 лют 2025
  • In this video we are preparing a Toyota Land Cruiser BJ73 to swap the original 3B engine for a 1HD-T turbodiesel engine and a 5 speed transmission. That's why we took the full body-off to give us more access to the chassis for easy installation. furthermore the brakes and suspension are also rebuild.
    also we add a new air conditioning system and we soundproof the whole car.
    if also have a project in mind send us a email by our contact form on the website. www.wiegman4x4...

КОМЕНТАРІ • 21

  • @BrianMariki2022
    @BrianMariki2022 6 років тому +2

    This is just brilliant...!!! I've always thought of swapping the 3B with the 12H-T but the 1HD-T is even better.

    • @Wiegman4x4Terschelling
      @Wiegman4x4Terschelling  6 років тому +1

      Both the engine's are very good. The sound of the 12h-t i prefer over the 1hd-t. The output of the 1hd-t is bigger.

  • @halvorsalvesen723
    @halvorsalvesen723 6 років тому +1

    Cool

  • @cfsprojects
    @cfsprojects 4 роки тому

    I can see you have being doing a great job. Question, is it easy/better result upgrade a Toyota 3.4Diesel adding a turbo, intercooler etc etc or put a “new” engine like you have mounted inside this portugueses BJ73?

    • @Wiegman4x4Terschelling
      @Wiegman4x4Terschelling  4 роки тому +1

      A 1hd-t is a bigger and more powerful engine. It runs smooth and it is an original turbo engine. You can also add a turbo to your 3B. This is also a nice conversion. But a 3B runs more like a tractor.

    • @cfsprojects
      @cfsprojects 4 роки тому

      @@Wiegman4x4Terschelling Thank you for your quick answer on my comment. I really do appreciate your channel. Keep going. Cheers!

  • @gubbtratt1
    @gubbtratt1 2 роки тому

    Is there any connections between the body an frame except for 4x4 switch sensor, speedo cable, fuel lines and brake lines that I'll have to watch out for when doing a frame swap on my lj70?
    Edit: might be a bit late but haven't found information on it anywhere else.

  • @hectorfabiolozanocorrea2342
    @hectorfabiolozanocorrea2342 6 років тому +1

    👍

  • @Pikulev_Evgeniy
    @Pikulev_Evgeniy 6 років тому +1

    Для приклейки шумоизоляции надо снимать кузов?!

    • @Wiegman4x4Terschelling
      @Wiegman4x4Terschelling  6 років тому

      Нет перед установкой нового двигателя 1hd-t. но это будет показано во второй части этого видео.

  • @adolfadolfvich3253
    @adolfadolfvich3253 6 років тому +3

    🎥👍👍👍👍👍👋👋👋😁, Toyota land Cruiser 70 series 🇯🇵❤️💪💪💪👍👍👍👍

  • @migueltrombettonipipinich1719
    @migueltrombettonipipinich1719 6 років тому +1

    El motor original es Fabuloso!! Para que esto!!????

  • @xdwx6168
    @xdwx6168 4 роки тому

    Bro, can I double confirm if Landcruiser BJ74 and LJ70 the same (length and width)? Because I thought of swapping the BJ74 top cabin into LJ70.
    Possible?

    • @Wiegman4x4Terschelling
      @Wiegman4x4Terschelling  4 роки тому +1

      The Lj70 is a short wheel base and Bj74 is medium wheel base. This don't work.

    • @xdwx6168
      @xdwx6168 4 роки тому

      Wiegman 4x4 : thanks bro for clarification. So what would be the equivalent chassis frame that fits BJ74 MWB?

    • @Wiegman4x4Terschelling
      @Wiegman4x4Terschelling  4 роки тому +1

      Use the LJ73, KZJ73 Or BJ73

    • @xdwx6168
      @xdwx6168 4 роки тому +1

      Wiegman 4x4 : YOU THE MAN! ! Thanks for your advise. So glad that I have been following your channel these while. All the best and stay safe!

    • @kennytang6530
      @kennytang6530 4 роки тому

      Yes it’s possible! In my local country, they can fit it to lj70 chassis with 73/74 body!

  • @lsabelitobrazoban6015
    @lsabelitobrazoban6015 3 роки тому

    Tengo un vehículo de eso y no los cambios por nada

  • @aplicacoesbiotecnologicas
    @aplicacoesbiotecnologicas 6 років тому +1

    This is a portuguese car