How Expert Mechanic Fixed a Broken Truck's Muscular Flywheel
Вставка
- Опубліковано 2 кві 2024
- How Expert Mechanic Fixed a Broken Truck's Muscular Flywheel #mechanic #truckmechanic
#restoration #mechanicalengineering #repairing #metalworking #vehiclerestoration #autoparts #lathemachine #manufacturing - Навчання та стиль
The stress cracks tell me its time for a new one
Im sure its not an option, otherwise why go through all this trouble.
@romanflores5505 yea but this will likely blow up at some point. This is like going to war with an ak that has blown up before and you switched the mag 😂
@@dahabsemitdiemutterfutter2735yeah, driving with this installed is a good way to lose your legs.
I'm hoping that this was just a guy using scrap parts to learn how to do it.
I'm surprised they didn't weld the cracks. Probably did off camera.
You are so right about the stress cracks but in his part of the world it has to be patched up, and in all fairness he did a pretty good job 👍
All that work to repair the center of a flywheel that's got more cracks in it's friction surface than the San Andreas Fault!!!
😂😂
That's not a problem, it can be resurfaced.
You do what you gotta do
@@awesomeness7117 Yeah when all you got is hammers, everything looks like a nail.
Got that right! Ever see a flywheel explode?!
"Okay Joe, see you next Monday, we'll do it again."
🤣🤣🤣
😂😂😂😂😂
😂😂😂 savage comment! Let's just hope a new one will be in come Monday!
This should be called "DESIGNED TO FAIL" 😂
Or Guaranteed to come back for another “Repair” …..
@@richardcornelius1050it's probably going to take out the whole truck and maybe a small village when she come loose 😂
love how he finishes it then bonks the teeth against the cement
Good old throw it on the ground for quality check! Wait... What? They have cement on the ground?🤯
That's the problem you noticed, not the cracks in the flywheel? Those teeth only engage the starter, you can file and damage them, won't change anything so long as they're there.
@@em4703he turned it down. Look at the face when he puts it down. He did did the whole job.
@@markstover7701there’s still fucking cracks in the friction surface man, what are you talking about.
@@KimballPrecisionRifles yeah I did see that. It looked like he did cut it. I know they still use them on trucks with minor cracks. Do you sell Rifles or customize them?
No way. Imagine going down a hill and you let up on the gas and this thing unscrews itself.
....or comes COMPLETELY unwound, unscrews the bell housing, firewall, and you legs
When that happens, the driver is screwed
With those right-hand threads, it will unscrew when under power if the engine rotates clockwise as viewed from the front. This will cause the flywheel to crash into the back of the engine.
Red locktite and it’ll be just fine
They made it for museum and you all taking it seriously 😂😂
It's show piece only
A lot of work to save a broken flywheel! The heat cracks make it susceptible to exploding should be replaced. Probably a discontinued part but credit to machinist doing the repair!
Yeah, when nobody makes that part, you've got to either rehab an old one, or make a New one from Scratch! A lot of work!
Денег нет на запчасть
He is not a mechanic. He is a machinist.
*No lubricant* was harmed in this short
на очке😂
Air cooled! ( sarcasm alert)
@@johnnywad7728 😂
They didn’t have a replacement flywheel
Lubricant is probably scarce also
🤷♂️
Maybe nobody sells it, because nobody has ever wanted to spend money on it.
When the flywheel lookes that bad it's ready for the bin...
The cracks pass all Indian and punjab safety standards 😂
Who needs a new flywheel when your backyard machinist can fix ya up in a jiffy
А где сварка кривым электродом???
Они накернят вставку по примыканию перед установкой. И может ещё краской мазнут для уверенности
😂😂😂😂😂❤
Ага, и эпоксидка!
Я тоже ждал
Или пучком остатков электродов))))
There is load on a flywheel in both directions, that things going to unscrew itself and be 60lbs of hells fury cutting up everything within 100ft
That's what I was thinking... what's stopping that from unscrewing??
Nah!
@@caseybanter5751No it only one directional spinning clockwise or anticlockwise, so if it is clockwise they want only make it anticlockwise.
They didn't show him putting a drop of red Threadlok on there... ;)
Same question I had in my mind. Why did they not weld the new inlet with the old flexplate?
Nobody's gonna talk about the shoes? 👟
These guys walk the hard line. The ingenuity constantly impresses
Just never mind all the stress cracks in the face of it...
That flywheel was done.
Just never mind that you know nothing about resurfacing of a flywheel. It's the same process as shaving a cylinder head or deck of a block. These people probably still have rotors resurfaced (turned).
Следующей этап , я так понимаю, будет проварить все трещены на маховике и проточить его. Красавчики,что тут скажешь.
Следующий этап - сдать в чермет! 😂
@@user-xo9hd8lo2x Эээ, нет. Этот маховик ещё долго будет радовать пакистанских пацанов. Они не одну коробку на нём ещё порвут.
@@user-xo9hd8lo2x В чермет они сдали кусок станины токарного станка, а этот блин ещё походит...
Воскресение мертвеца только Ильдар делает. А этого маховика - мертвый побольше из значения слово мертвый
У тебя голова в трещинах и это заметно, а маховику пох на них.
That flywheel has more crack than Harlem
The first time I’ve seen a mechanic with a lathe in his workshop 🤔😂😂
Пока есть спрос, будет и работа у этих ребят. В далеком 1995 году была у меня вольво 940. Полетел мотор. Нужны были гильзы, чтоб перегильзовать. Токарь выточил на токарном стонке новые гильзы по образцу, загильзовали, собрали мотор и я проехал на нем больше 200 тыс.км и продал машину. А когда точил токарь, многие прикалывались типа не будет работать. Так что все что делается от души, все работает. Диванным экспертам это не понять. Для них это как Очевидно Невероятно
Но не в этом случае! И советских токарей сравнивать с этими уже неправильно 😂
@@user-cw7op2uk4z
не надо ля ля, специалисты и раньше были, и теперь они ни куда не делись. Но стало в разы больше дилетантов.
Parabéns a esses trabalhadores, são uns artistas.
Про умение токаря никто ничего не говорит. Спец хороший и голова работает. Как эксперимент вполне себе решение. Только и шайбу эту приварить нужно, поскольку на маховик нагрузка в обе стороны вращения прилагается. А маховик нужно в металлолом выкинуть.
А в целом, всё это от нищеты.
Тут вопрс в том как в 95ом году на новом вольво 940 мотор положили ,у меня на вольво 940 500т+ пробег и мотор не трогали ,хотя может это та вольво с гильзовкой от вас 😊
Presumably that is a steel boss inserted in a cast iron flywheel, should be pinned or keyed to stop it rotating though.
I think it should be completely welded and then they can machine it again since they like machining so much.
@@rileymatthews7167 Exactly, And, because it is Not welded, it will Not hold the engine's Torque, so therefore it will dissassemble, and fall apart Again, Plus causing more damage 2 the engine, and transmission case , or even 2 the driver.
Seems like they absolutely had to do something like pinning or welding. Otherwise, it's gonna unscrew. He just used an adjustable wrench to screw it in.
@@TheZaxx good luck to them if they attempted to weld a cast iron flywheel to a steel boss.
This is where wise guys reply to this video, just needed to leave my stamp
Такие мастера вызывают уважение в век одноразовых деталей и машин.👍
Don't mind those heat cracks. It'll be all right
- Маховик в трещинах!!!
- На следующее ТО приносите, посмотрим....
Это графит а не трещины. Так выглядит чугун.
Ага и маховик весь в трещинах...😂😂😂
Это армирование 😂😂😂
Это называется работа на отьебись 😂😂😂точнее на пару часов как дадут нагрузку в России и маховик акуеет
И что? Он ещё лет 10 проходит
Ему ещё ходить и ходить 🤣
@@ToT_Camblu Воздухом.
These fellas do some really inventive work, the lathes etc look to be in well maintained condition.
You mean, " A master Machinist repairs a garbage flywheel."
Маховик перегрет, сцепление палили нещадно
А что ты хотел? Там грузовики с тройным перегрузом ездят.
В любом маховике есть трещин
Теперь в магазине полюбому надо с ренгеном запчасти покупать,,,, но за труды жму руку ,,,
Now the flywheel unthreads itself, every time the engine shuts off😂
Can’t believe he didn’t a least weld the center so it doesn’t unscrew
так чо он вставку резьбовую не приварил штоле? ВСЁ Х*ЙНЯ, давай по новой, всё переделать))
учитывается по ходу движения коленвала будет работать на закручивания
@@avtolubitel0557выдержит ли резьба и буртик нагрузку, особенно при резких стартах?
@@avtolubitel0557главное двигателем не тормозить😢
Justru dengan pengelasan akan menimbulkan zona rapuh yang disebut HAZ
@@romandavidov8137 и с толкача не заводить😂
My god that is horrendous.
Never mind the cracks in the casting.. or that a flywheel coming off will take your legs with it. Wrong at every level.
Tenth time this things been repaired😂
If an emergency repair, to be safer, add stiches to thread seam. Heat the whole thing to welding temps, stress relieve.
@@justinloxley9695😊😊😊😊😊😊😊😊
if its welded together no problem
@@bratwurstmaxxehaxxe5315 welding adds stress and warps the plate, stitch the seam
오늘도 평화로운 파키스탄 형님들
용접기 산소 선반만 있으면 못만드시는게 없어요
이게 뭐야 자동 음성지원ㅋㅋㅋ
Give that man a 200 dollar raise 🎉
Осталось покрасить и отправить переплавку.
для них дорого вот и шаманят, Но ребята при таком объёме работ целиком маховик изготовить можно, а зубчатый венец переставить.
Вот именно.
Переплавить и отлить заново.
Пусть похуже заводского, но в разы надежнее чем так...
Хоть и маховику скоро кранты придет но токарь от БОГА! Золтые руки,молодец!
Ese es buen trabajo esa parte hoy en dis esta csro
@@user-lu9lc9wn5n не просто скоро, а немедленно.
Переплавить, отлить, и выточить новый разумнее всего.
😂😂😂😂😂😂
Never underestimate a Craftsman.
Не лейте молодое вино в старые бурдюки!!!! Нельзя вдохнуть в умершего жизнь. 😂😂😂
крепление это хорошо, а рабочая поверхность вся в трещинах их не смущает???
При обработке видно было что это чугун а на крутил туда обычную сталь , как она себя поведет я незнаю. Токаря поймут по стружке
Да нормально должно быть...
oh hell no…you didn’t even fix the cracks in the friction surface?
Трещины для охлаждения!
This is not cracks, this is the tungsten-carbon fiber inclusions. And please don't tell anyone about this.
@@borisbudkin6349 Lol…ok 👌
99% of Americans can't name ONE TOOL that he is using. 😮
That flywheel is ready for another 💯 years 😊😊😊😊😊
Я токарь и слесарь со стажем, это всё на один запуск с толка а стартер будет отварачивать плюс дисбаланс из за неточно разметки и отсутствия балансировки.И вообще это же чугун. Ролик для незнающих, по другому надо было делоть раз на то пошло.
Да клоуны бл
Они правую резьбу нарезали, там не стартёром а двигателем будет фланец откручиваться.
I would at least put some dowels and braze them on. The flywheel seems eager to strip the threads off and do what its name says, fly away.
These machinists are miracle workers.
The machine work probably costs as much as a new flywheel 😂
C'est un volant moteur qui a déjà subit une réparation avec un acier non traité C'est pas étonnant qu'il a cassé mais il recommence la même erreur et en plus il est plein de fissure ce volant est bon pour la poubelle mais après faut les comprendre ils font sa par manque de pièces détachées ils ont pas trop le choix
Tout à fait, les fissures sont grosses comme le nez au milieu du visage. Ce métal est très fatigué.
I figured they would at least throw a weld to that sucker.
It's ok they used some loctite on the threads
@@brettw90фиксатор резьбы разрушается под длительным воздействием температуры
What is trash to the whole world is new to them😂😂😂 let them use the trash👌🏼
This repair is only acceptable in a Mad Max scenario
Интересно сколько проходит данная деталь
Главное назад резко не сдавать, а то резьба открутится 😂😂😂
Тикток доснять хватит😂
@@prestichмаховик в одном направлении крутится
@@1-_-12-_2 ха, точно.
Бред эксклюзивный, видео для просмотров.
Резьбу нарезал - на станке- одним взглядом- красавчик
Don't worry about those cracks! You'll be totally safe on the road.
Неужели до такой степени все плохо, приходиться маховик ремонтировать которому уже место в металлоприемке
А что резьба удержит?
Если не заводить
Тапочки в восторге!
Надо сразу белые одеть. Прямиком туда в них😂😂😂
Nice job, but what if they start? The truck in reverse, will it back out
Dont worry about those cracks, certified hood classic
Покажите где он разлетелся по швам и размотал все по пути 😂
Когда вас со всех сторон обложат санкциями и со временем вы свои детали тоже переваривать будете,не то,что бы маховики и прочее.А эти народы не сдаются и не жалуются,а находят выход из ситуации вместо лежки на диване и комментирования подобных роликов.
Крайне рекомендую тебе ездить на отбеленном от перегрева чугунном маховике, на инжекторный двигатель ставить карбюратор, дрочить цилиндры наждачкой под ремонт и слезы счастья вытирать от надёжности узлов, комфорта эксплуатации, удобства ремонта такими методами, трудозатрат и потери времени)
Они не пытаются, они просто снимают видео, тут и ежу понятно, что это дерьмо там выживет до включения 1й передачи.
На всё есть свои технологии, никто с дивана просто так говном не обливал эти методы, если бы это работало и было правильно)
Санкции и так задрали, но, тем не менее, достать детали можно.
Если ремонт техники слишком дорогой или невозможный, то такая техника людям не нужна обычно, и уж темболее никто не будет ремонтировать это говно каждую неделю, чтоб хоть как-нибудь было. Есть масса более ремонтопригодных аналогов)
В данном конкретном случае люди не смогли купить новый маховик, который можно купить и который не стоит космических денег, скорее всего просто для видео. Если такую деталь невозможно было бы достать новую, а единица техники уникальна, то целесообразно изготовить новую деталь на производстве, что будет точно, надёжно, окупится и в итоге выйдет дешевле, чем такого формата кустарный ремонт
@@user-tb9tm4xt1b свой совет себе посоветуй!!Я знаю,как у вас делают,тем более после санкций.Так,что жужню не разводи!!ыксперт
@@user-tb9tm4xt1bыксперт,ты так ничего и не понял!!))
Они не знают про понятие: "усталость металла".
А то что диску хана, весь в трещинах, это нормально?😁
U just wait till the law firm "dewey, sue'em and howe" sees this. Its gonna be yuge!
Better chance of finding a three legged ballerina in Pakistan than a partner with that law firm.
Despues del roscado necesita
Poner tres espigas .. x q ese material queda debilitado y se puede girar ...
Меня одного удивляет КАК можно было срезать маховик? Что надо было делать? Это с грузовика ДЖИМХАНЫ?😂
там не такие кардабалеты пакистанцы выкидывают. мосты на 2ое ушатывают.
This is true environmental protection 👌🏻♻️
Repair and fix until it's beyond repairable instead of buying a new one
He done a fantastic job. Shame the flywheel is surface shattered, now he needs to machine a new flywheel to match his shiny new center boss
Don Garlits wouldn't even use that!
Don Garlits ESPECIALLY wouldn't use that. He learned a hard lesson about exploding clutches once.
А а что загнутым электродом забыл проварить😂😂😂
Never heard of a muscular flywheel
Rebuilding a broken flywheel that is destined to fail is suicide.. .
Эти пакистанцы не перестают удивлять, дивицыт запчастей ни такому научит🤟
😁 дЕФицИт грамотности у тебя
@@user-tj7we4cc7j да вообще похуй я ни исправляю написал быстренько понятно де че написал
Sometime parts are not readily accessible. Great job on adapting and overcoming a problem!
Imagine u hit reverse and ur flywheel just start dancing inside ur transmission
"Пакистанский ремонт" - это стиль жизни 😂
Главное, что бы вставка не раскрутилась по резьбе 😂
Двигатель не запускать!
I wouldn't run that piece of junk in my truck.
Have seen the trucks they run in India Death traps
U wouldn’t be able too bud just say that these people got this shit down it sucks because in your head watching this you was thinking that also but u have some Ill will in you that can’t be happy when someone beats the system you probably watch Cleedess McFarland and think he is the shit don’t u 😂😂😂😂😂😂😂😂 goofy people
Nice work
Stress cracks dictate that that flywheel has seen its last clutch.
Скажу честно снимаю шляпу, 👍👍 мастера своего дела
Этот маховик будет ходить,старые малооборотные движки так и ремонтировали,все делалось на коленке и раздолбаных токарниках и ходило,мы как то дт75 шатунные шейки притирали вручную,с подгонкой прокладок под вкладыши,работал как миленький,через 2 года я уволился,а он еще работал
У дт 75 допуски +/- трамвайная остановка. При его характеристиках вообще ничего удивительного нет, он и был создан для такого колхозного ремонта кувалдой и электродом.
Просто времени это отнимает массу, никакого смысла нет этим заниматься сейчас, когда на любом производстве за небольшие деньги тебе подгонят, расточат, изготовят то, что попросишь и нарисуешь. Уж молчу о том, что можно коленвал просто купить, а не дрочить его наждачкой 2е суток)
@@user-tb9tm4xt1b это в большом городе все что хочешь,а в глубинке сварка и болгарка,остальное что и было ушлые деятели на металл попилили еще в 90е
@@user-ih7gn4pi9e в глубинке есть почта России? Есть.
Есть интернет? С огромной вероятностью.
Отправить что-то в крупный город/райцентр можно, в интернете найти организации проще простого)
Я не с потолка это всё беру, сам в глуши живу, всё нормально делается)
نتمنى لكم مزيدا من العطاء والتقدم والرقي والنجاح الدائم والمميز ومواصلة العمل بجدية وحرفية عالية الجودة اميييييبييين
It’s all cracked to hell.. 😂
Excellent work with good finishing
The Mechanic did not fix the the flywheel. The Machinist did.
Dress shoes are a nice touch
I've lived where resources were limited to include wealth. I'm always fascinated by human ingenuity to keep daily life moving in the right direction. Having resourceful friends to help keep food on your table is wealth beyond measure. Well done, gentlemen 💯👍
Маховик уже в трещинах😂😂
These people are amazing, they think outside of the box.
Just because you can, doesn't mean you should.
Thats one muscular flywheel 😂😂
That’s one “muscular” fly wheel if I’ve ever seen one
Any were else they would hve thrown it out,but you see when you don't have access to new parts you become creative, they are the best machineest I've ever seen👍👍👍
We obviously have different definition of “expert” and “mechanic” but hey you do you…😂
True environmental hero can fix stuff and prevent it going to landfill for a broken part
They had me at "muscular."
It's amazing how engine flywheels can be recycled 😊 From Japan 🇯🇵
There’s clearly no DOT out there.
Damn he working in ALLIGATOR LOAFERS!!!!