Sound: Esquire Tele 5-Way Humbucker Cocked Wah Eldred Mod Blower Switch Coil Split Reclaimed Pine

Werner Guitars Website: wernerguitars....
Reverb shop: Search: "Werner Guitars" reverb.com/sho...
Ebay shop: Search: "WernerGuitars" www.ebay.com/u...
Sweetwater Gear Exchange: Search: "Werner Guitars" www.sweetwater...
www.facebook.c...
Equipment used: Fender Frontman 25R 2-channel solid state amp through Blue Yeti Mic with no pedals (straight to amp). Amp settings: Treble-8.3, Middle 8.1, Bass 8.7, Reverb-2, Normal Volume-2, Gain-3, Drive Volume-2.2. Mic is on the floor 2 foot in front of the amp. The amp is 2.5 foot off the floor slightly tilted up on an amp stand. Played in large open-space room.
Comes with padded gigbag. All parts were bought new and put in the guitar. General specs below, and full description/specs at the bottom.:
You have OPTIONS at Werner Guitars. Just message before the sale if you want anything changed about the guitar. (Pickups, hardware, new wiring/signal chain, etc.) You will be notified if the change can be made, time to complete, cost if any, and pictures provided as appropriate. Get the guitar YOU want. Message today!
Switching Positions:
1. Humbucker w/ Volume & Tone (Resistance 14.77 ohms)
2. Humbucker Straight to Jack ("Blower Switch") (Resistance 15.73 ohms)
3. Humbucker w/ Eldred Mod - No Tone (Resistance 14.77 ohms)
4. Humbucker w/ Arlo Cocked Wah - No Tone (Resistance 241 ohms)
5. Neck Side Coil w/ Volume & Tone ("Coil Split" (Resistance 7.61 ohms)
General Overview:
Reclaimed Pine Body with Walnut stain and satin nitrocellulose lacquer
Black Roasted Maple Neck with Rosewood Fretboard & Matte Finish
Black Humbucker Bridge Pickup 16k
Full level, crown, polish and full set-up by a certified luthier
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.
D'Addario Nickel Wound Strings 9-42 EXL120
Lightweight: weight of the guitar is 7.2 pounds
Body:
Reclaimed Pine Body with Walnut stain and nitrocellulose lacquer
Neck:
Scale length 25.5"
Black Matte Roasted Maple neck with Rosewood fretboard, modern "C" profile, 12" radius, and 22 medium-jumbo frets. (1st fret 0.88", 12th fret 0.97")
Hardware:
Black modern bridge
Black control plate
Black Axe Grinderz knobs
Black switch tip
Black output jack thimble
Black strap pin buttons
Black Wilkinson Tuners
Black neck plate
Chrome string ferrules
Black roller string trees
Electronics:
Black Humbucker Bridge Pickup 16k (Exact measure 8.77 ohms).
CTS 250K Mini Split Volume/Tone Potentiometer Audio Taper
5-Way Super Switch
0.047uF Mallory 150M 5% Tolerance 250v CDE Tone Capacitor
All cavities have been shielded and insulated. All grounding, shielding, insulation, and pickup phasing/polarity have been well thought out and executed.