elactronic selector control modul Jaguar XF open and repair تصليح سلكتر جير جاكوار اكس اف

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 101

  • @caylebn-thetransporter5591
    @caylebn-thetransporter5591 2 роки тому +6

    i like this video because its a straight to the point step by step video....We need them all like this! Good job!

  • @nicklowe536
    @nicklowe536 Рік тому +2

    Fantastic video you made it so easy to take apart and get to the unit out thank you so much

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому

      You are welcome 🤗 thank you for yourThank you for your trust🙏

  • @maryamkhashan526
    @maryamkhashan526 3 роки тому +6

    الله يعطيك العافية🥰

  • @wikitube.arabiya
    @wikitube.arabiya 3 роки тому +2

    NO 1 ❤️🇵🇸

    • @iyadkhashan2350
      @iyadkhashan2350  3 роки тому +1

      Wiki tube العربية كل الاحترام والتقدير ♥️♥️♥️♥️

  • @kingjulien9525
    @kingjulien9525 Рік тому +1

    THANK YOU very much Sir for the free knowledge. Water from heavy rain leaked from the roof to my shifter, frying the gear shifter, I had to DIY. It was very helpful and fun removing it. I'm just waiting for the replacement part.
    Also, there is a additional screw under the part with the red tape 3:00.

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому +1

      Good work 👍 thx for sharing me your work 🤗.if you need any help!! Please let me know 👍

    • @kingjulien9525
      @kingjulien9525 Рік тому +1

      @@iyadkhashan2350 Thank you Sir. Can I reprogram it myself as well or should I need a mechanic to do it?

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому +1

      @@kingjulien9525 High probability need programming! You try! But talk to someone, even if you don't succeed in programming, you will find him waiting for you!👍

    • @kingjulien9525
      @kingjulien9525 Рік тому +1

      @@iyadkhashan2350 Thank You Sir!!

  • @Carlos15674
    @Carlos15674 2 місяці тому +1

    How did you get the silver plate off of the gear shift knob?

    • @iyadkhashan2350
      @iyadkhashan2350  2 місяці тому

      There are screws on the opposite side, from the inside!

  • @martinescobar4165
    @martinescobar4165 Рік тому +1

    Hi you doing sir can I ask you please what’s the name of the screw driver set you used sir

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому

      Hello! Thank you for reaching us,
      You can find the screw driver at any store! No need specifically.

  • @gstacks510
    @gstacks510 5 місяців тому +1

    Can you bypass removiing some of the trim? I feel like you dont have to remove all those pieces to get to the gear shirfter?

    • @iyadkhashan2350
      @iyadkhashan2350  5 місяців тому +1

      If you you know how to remove it!!! Don’t remove all.
      I showed to learn who’s don’t know!🙏🏻👍

  • @Th3.C4ptain
    @Th3.C4ptain 4 місяці тому +2

    Thanks I had same problem, used your video, removed gear selector and sent off for repair! The guy is on ebay that repairs. Costs 100 quid.

    • @iyadkhashan2350
      @iyadkhashan2350  4 місяці тому

      Thank you so much 🙏🏻

    • @Grievance_Studies_Affair_2018
      @Grievance_Studies_Affair_2018 3 місяці тому +1

      @@iyadkhashan2350 Bro, mine is not coming out! There is another black screw under the park brake release lever and I don't know how to access it. You didn't show that in your video.

    • @iyadkhashan2350
      @iyadkhashan2350  3 місяці тому

      Bro!!! I did show it, it's to hard to take it off, but keep trying,

  • @bronks1200
    @bronks1200 Рік тому +1

    How do u remove the screw under the neutral switch? It’s screwed into one of the legs on the selector.

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому

      You can unscrew the piece! And then loosen the screw👍

  • @tonycarreon6885
    @tonycarreon6885 2 роки тому +2

    Where did you get the new piece to replace the old

  • @Mandyaguirre
    @Mandyaguirre 7 місяців тому +1

    Hello, I’m new to jaguar if I buy a used one off eBay do I need to reprogram the used one ? or can I just switch it out and it works good as new. ? Thank you

  • @johnsonabban7476
    @johnsonabban7476 3 місяці тому +1

    Please does a new shifter replacement need programming before it starts working?

    • @iyadkhashan2350
      @iyadkhashan2350  3 місяці тому

      If you change it!! Yes you need to programming it 👍🙏🏻

  • @samnik9760
    @samnik9760 2 роки тому +2

    How did you replace the broken part? Did you buy it from ebay, I have the same problem. Thanks

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому

      Yes! You can do the same

    • @doughboy129f
      @doughboy129f 2 роки тому +1

      Hey would u happen to know the name of the part that needed replacing

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому

      @@doughboy129f nu! It’s one piece

  • @latourstanly
    @latourstanly Рік тому +1

    Wherry did You buy that WHITE broken plastic ?

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому +2

      I bought a used part that doesn't work at a reasonable price, I used the part ordered

    • @latourstanly
      @latourstanly Рік тому +1

      I also bought the whole house of a 2.7 diesel and placet it With the print plate of the 3.0 D S. Do I have to reprogramm the whole console Which me myself put together. Thank You So much.

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому

      If you change any piece of electricity! You must reprogram it. And if only it was a mechanical piece! No programming required.🤗👍

  • @maryamkhashan.skz15
    @maryamkhashan.skz15 3 роки тому +4

    ❤❤🔥

  • @figgmoneytc9723
    @figgmoneytc9723 2 роки тому +1

    Just bought a new gear selector for my Jaguar do I have to program anything or do I just hook up the new one ??

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому +1

      yes! If you have a new one, I just changed a Micanec part.

    • @figgmoneytc9723
      @figgmoneytc9723 2 роки тому +1

      Well it’s used not new but in better condition than the one I have on there my car is stuck in drive Same problem as this

    • @figgmoneytc9723
      @figgmoneytc9723 2 роки тому +1

      So I take the bad one off correct like you showed us and I’m just not sure do I hook up the used one I bought and it’s just good I’m new to the jaguars I love this car

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому +1

      You have to put it in the same position with old one. ( like P - or D- or N )

    • @figgmoneytc9723
      @figgmoneytc9723 2 роки тому +1

      Those black star keyscrews what T type of skrew is that like what size do u use to take the black star key out please

  • @zeidaraj6339
    @zeidaraj6339 Рік тому +1

    الله يعطيك العافيه ممكن تحكيلي من وين جبت القطعة الي كانت مكسورة ؟

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому

      اشتريت جير مستعمل ، لسيارة ستيرنج يمين ،سعره ارخص 👍🙏

  • @ammarkashan5199
    @ammarkashan5199 3 роки тому +5

    أنت أصلي يا معلم

  • @edycoconstruction2991
    @edycoconstruction2991 3 роки тому +1

    Good work 👍

  • @tonycarreon6885
    @tonycarreon6885 2 роки тому +1

    Very good job

  • @naseralkuwari4172
    @naseralkuwari4172 2 роки тому +1

    كيف استخدام السياره تنصحون فيها ولا

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому

      السيارة جيدة عالطريق ، وقوية!

  • @fareskhashan8558
    @fareskhashan8558 3 роки тому +4

    💙💖💖💖

  • @bonehead2496
    @bonehead2496 2 місяці тому +1

    What about the screw under the e brake

    • @iyadkhashan2350
      @iyadkhashan2350  2 місяці тому

      You need to open the e brake! After that you can take the screw off

  • @fareskhashan271
    @fareskhashan271 3 роки тому +3

    💖💖💗

  • @tavarisanderson4650
    @tavarisanderson4650 10 місяців тому +1

    How to get the screw that’s under the lever that puts car in neutral?

    • @iyadkhashan2350
      @iyadkhashan2350  10 місяців тому

      There is a place where you can insert a screwdriver! It's difficult but not impossible! If you can't, please contact me! Or go to a specialist. Thank you for contacting us 🙏

  • @charlesmurphyii6504
    @charlesmurphyii6504 2 роки тому +1

    Can you tell me if you checked for any code errors, if you had any. Water got into my gear shift selector and now it’s stuck in park.

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому

      Water may have entered the electrical circuit, you must check it, then clean it.
      If you need anything let me know, thank

    • @josephmartin3330
      @josephmartin3330 2 роки тому +1

      did you find a fix for that water in the gear shifter? I just got water in one and same thing is happening Jaguar XF 2015

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому

      Yes you can! If it Micanic problem.

    • @charlesmurphyii6504
      @charlesmurphyii6504 2 роки тому +1

      @@josephmartin3330Well I just ended up letting it dry out completely and it started working. I’m sure this will depend on the climate and environment you live in. Hope this helps.

  • @29HUNbL0C
    @29HUNbL0C 11 місяців тому +1

    Which tools is needed for the whole process?

    • @iyadkhashan2350
      @iyadkhashan2350  11 місяців тому

      Very simple tools! You can watch the video, and know the details! Thanks 🙏

  • @gngk3956
    @gngk3956 Рік тому +1

    السلام عليكم اخي انا عندي القير عادي يصعد وينزل بس معلق على Pاحاول احطه R او Nمايرضى

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому

      وعليكم السلام ورحمة الله وبركاته ، يمكن يكون معلق!! فكه وتتاكد شو السبب.وبعدين ردلي خبر 👍

  • @bonehead2496
    @bonehead2496 2 місяці тому +1

    How tf do you get that wooden acute angle out under the console

    • @iyadkhashan2350
      @iyadkhashan2350  2 місяці тому

      In the video, I showed you everything, if you have any questions, please contact me on Facebook, by the same name،🙏

  • @gjorgistojanov9733
    @gjorgistojanov9733 Рік тому +1

    my gearbox is stuck in park and I can't put it into gear.
    What could it be?

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому

      I can't know like this. You have to check the gear box on a device, and then you can find out the problem.🤗

  • @azizalharithy8073
    @azizalharithy8073 2 роки тому +1

    يعطيك العافيه.. ممكن تشرح اكثر كيف صلحت القطعه المكسوره بالداخل

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому +1

      لزقتها،! بس رجعت انكسرت من البرد! ورجعت غيرت القطعة كامله!

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому +1

      اي مساعدة!؟؟
      عالفيس بوك نفس الاسم

    • @azizalharithy8073
      @azizalharithy8073 2 роки тому +3

      في شركة عامله نفس القطعه البلاستيك محوله لحديد عشان موضوع الكسر ، راح ارسلك الرابط للافاده

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому +1

      شكرًا جزيلًا يا اخي

    • @doughboy129f
      @doughboy129f 2 роки тому +1

      @@azizalharithy8073 may you please send the link for the part

  • @mohammedmagdy1992
    @mohammedmagdy1992 4 місяці тому +1

    محتاج اتواصل مع حضرتك ضرورى

    • @iyadkhashan2350
      @iyadkhashan2350  4 місяці тому

      نفس الاسم على الفيسبوك

    • @mohammedmagdy1992
      @mohammedmagdy1992 4 місяці тому

      @@iyadkhashan2350 انا بعت لحضرتك على الفيس

  • @tonyangel58
    @tonyangel58 2 роки тому +1

    Lol this is my job in the morning Thankyou sir
    mine is doing the same

  • @m-allumaihi
    @m-allumaihi 2 роки тому +1

    الله يعطيك العافيه عندي الزر حق ضغطة التشغيل انكسر شو الحل

    • @iyadkhashan2350
      @iyadkhashan2350  2 роки тому +1

      يمكنك تغييرها!!!
      يجب ان أعرف تفاصيل اكثر ، لاعطيك النصيحة!
      شكرًا للمتابعة

  • @aliayoub4374
    @aliayoub4374 Рік тому +1

    Hi do I need to programme it if I replace with new one? Many thanks you r doing a great job

    • @iyadkhashan2350
      @iyadkhashan2350  Рік тому

      If you want to replace it completely! You need to reprogram

  • @charleswaynewright2042
    @charleswaynewright2042 Рік тому +1

    Great thanks for the lesson

  • @conradmaxwell3751
    @conradmaxwell3751 3 роки тому +1

    Your video was awesome. You desperately need P R O M O S M!