I think you should really get more views on these videos. You're making a complete and relevant playlist to fully learn Mekanism, and I appreciate it. Hope your channel will grow ;)
the topmost layer can actually be more turbine vents (except for the edges; those need to be turbine casings); water output rate depends on the amount of vents so in extreme cases you actually need more than the sides can hold
It is my understanding that the use of fuel or electric heaters is completely inappropriate. Since more energy and resources are expended than returned by steam in a steam turbine, it looks like the boiler was made purely for the fission reactor. I tried heating a boiler with 30 fuel heaters and wasted a dozen stacks of coal blocks, getting almost nothing in return.
You are absolutely right. Using the heaters is a very bad way of using the steam turbine. I only separated the boiler and fission reactor as the video would be near an hour and a half
A lot of people are new to modding and don't know how to use JEI. As well as that modpack authors change the recipes in packs and this is to demonstrate how the vanilla versions of each mod works
fission, boiler and turbine shouldn''t be used for power generation, only to use/get rid of the heat, if you want to use a turbine for power, you're better off with fusion, boiler and turbine. one tip, in mek v10 don't use the reactor to make fuel, use the chemical infuser to make D-T fuel, far more efficient.
@@TheByQQ not for the fission combo, you just want to have the turbine running to get rid of the heat and just use the materials it provides, if you want power, use fusion, boiler and then turbine for power, the only exception to this would be the use of an SPS to make antimatter.
I think the biggest limitation with these generators (with the steam turbine addon) is there aren't any pipes in the game that can transfer the amount of steam it produces fast enough to keep up.
I've personally never found a use for the boiler. I go from wind generators, to a fission reactor, then straight to fusion. I feel like the boiler is unnecessary tbh
I think that skipping the crafting steps (since everyone uses a TMI-equivalent) as well as shortening the building would have given you more time to explain how the multi lock actually works, ratios etc.
It’s better to use a fission reactor to make steam. The turbine itself makes power instead of needing power. The boiler is also more efficient with the fission reactor and using sodium cooling
I don’t get why you would use creative energy cubes when you’re trying to teach us how to get energy though? Why not use something beginners would use. Cause I’m still stuck on wind turbines to power everything you just showed.
These videos are to demonstrate how things are made and how they work. They aren’t a tutorial of how to progress in mekanism. If I showed things like that everyone would just copy the video in their worlds and it would make it boring. The fun is figuring that sort of stuff yourself. Besides the boiler and turbine shouldn’t really be used together. The fission reactor is your next step. You make a fission reactor for steam and plumb that into the steam turbine then it’s a closed system and just loops
@@Mondays3 hmmm ok. So I think I just kinda misunderstood the reason for your videos. I thought of them as like a step by step kinda tutorial for mekanism. Thanks for explaining.
SO AFTER READING COMMENTS AND COMING TO A CONCLUSION , I THINK YOU CANT CREATE IT ON MC ETERNAL THERE SOME SORT OF RESTRICATION COMING FROM ONE OF THE MOD IN THE PACK SO YEAH .. BUT AMAZING VIDEO JUST WANTED TO LET PEOPLE KNOW
anyone else having an issure where your turbine wont hold over a certain amount? I followed the steps and build a 7x7 but my blades dont spin and it only holds 157kmB
You didn't display your correction that you made and it iterates that the saturation condensing layer goes higher then what it needs be. This video should be re-uploaded with the correct information.
hmmm very strange. First time I am hearing someone have this problem from my videos. I could be that the modpack author has disabled the turbine but I find that unlikely. Hopefully you have solved the problem by now!
@@Mondays3 I have indeed, it was a mod confliction with Create, although I have no idea why or how. I removed each mod from our server one at a time until finally, Create removed, turbine formed. After reinstalling Create, it worked perfectly fine. I'm at a complete loss for how the two conflicted, however, all is working fine now! Thanks ~
Using the fusion reactor is the best way to generate steam to make RF. The fusion reactor can also be used to make steam but it is less efficient than using the fusion to reactor to make only RF
I know this is old, and I’m currently playing on 1.12.2, so some of those values regarding the steam turbine are outdated on my side, but is there a way of generating more then what a maxed out turbine produces with a maybe similar setup in terms of cost-efficiency, but less size ? I’m looking for a mod that takes me to the next step, I’m currently producing around 400 MRF per tick with my setup, but I’m aiming for the 1 GRF per tick mark, problem is that my world already is starting to lag because of all the fusion reactors, 2 maxed out steam turbines and D-T-Fuel factories. My goal is to be able to produce enough energy to fuel around 10 replicators from IC2 24/7 without the need to maintain them all the time so I don’t run out on buffered UU-matter. I’m currently on 57 matter fabricators, which is barely enough to run 2 replicators with 19 overclocking upgrades at all times, and just building more steam turbines won’t cut it because of the lag. Do you have some mod recommendations that aren’t „too overpowered“ ? I still want to have progression in my tech tree.
Edit : I’ve found a solution to that mess, I changed the IC2 mod with IU, and can now utilize switching freely between RF and EU, while using quantum generators to go way above 1GRF per tick. Now I got a new task to focus on, switching out my heavily on IC2 relying industry with IU-components. Kinda annoyed that basically everything breaks now, from my ME-Crafting system to the way I distribute D-T-Fuel to my fusion reactors. Now I need to replace everything before my 600 GRF buffer runs out, wish me luck 😂
do you know what to do with spent nuclear waste? looks like it doesnt just go away in waste barrels, ive got waste barrels filled with spent nuclear waste and now its overflowing. i dont know how to dispose them, any suggestions?
In case you're still interested - solar neutron activators will turn it into polonium, which is still stored in barrels but I think at a significantly lower ratio? It can also be turned into pellets which are 100% safe and are just an item.
@@slaytonpeale9727 that's normal nuclear waste, when you turn it into polonium pellets or plutonium pellets it becomes spent nuclear waste which is completely useless and does not decay the easiest way to dispose of it is to bring it far away then break the storage container, causing temporary radiation around the area
While using this more, I found that the power system is very poorly put together even at the very basic level. Everything consumes way too much pretty cheap to make or multiplication, but it’s not like you could multiplied entire stacks nowadays.
Really I didn’t show this in a good way. You want a fission reactor for this. A boiler to use for cooling a coolant and then the steam turbine to make power. Using resistive heaters are a very bad choice and you won’t gain a lot of power
@@Mondays3 ahh I see I have videos which I’ve been extremely but I found very quickly that or duplication and other systems are extremely painful to run at mass. The energy output is just never enough it seems.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
2 years old and this working wonderfully for me to make my first Turbine. Super simple to follow and laid out wonderfully!
I think you should really get more views on these videos. You're making a complete and relevant playlist to fully learn Mekanism, and I appreciate it. Hope your channel will grow ;)
I hope they will grow some day! But for now I am just trying to help people. Thank you for your support
You have no idea how much this series has helped. Really needs more praise. Thank you :)
So happy it helped!
@@Mondays3 i build a mekanism turbine in sky factory 4 but it doesnt work i did everything like in
your tutorial
These are the most thorough Mekanism tutorials/show cases I've found on UA-cam.
I don't like skimming over mods! Even if it means I stick to only one mod for weeks and weeks on end
the topmost layer can actually be more turbine vents (except for the edges; those need to be turbine casings); water output rate depends on the amount of vents so in extreme cases you actually need more than the sides can hold
Thanks. I built fission reactor yesterday and my turbine was not running, so i made this and fixed problem.
So glad this helped
It is my understanding that the use of fuel or electric heaters is completely inappropriate. Since more energy and resources are expended than returned by steam in a steam turbine, it looks like the boiler was made purely for the fission reactor. I tried heating a boiler with 30 fuel heaters and wasted a dozen stacks of coal blocks, getting almost nothing in return.
You are absolutely right. Using the heaters is a very bad way of using the steam turbine. I only separated the boiler and fission reactor as the video would be near an hour and a half
You can use boiler for the fusion reactor. It will actually land you more efficiency.
20:30 gave me a jump scare with that sound effect lmfao
Love your videos, they’re so helpful! Keep up the good work:)
Glad you enjoy and thanks for the support
GFE should be Giga FE. Factor 1000 from MFE
Very nice vids!
Might I point out that if you have something like Mekanism installed, you are going to have something like JEI.
A lot of people are new to modding and don't know how to use JEI. As well as that modpack authors change the recipes in packs and this is to demonstrate how the vanilla versions of each mod works
fission, boiler and turbine shouldn''t be used for power generation, only to use/get rid of the heat, if you want to use a turbine for power, you're better off with fusion, boiler and turbine.
one tip, in mek v10 don't use the reactor to make fuel, use the chemical infuser to make D-T fuel, far more efficient.
What else would you use a turbine for if not for power?
@@TheByQQ not for the fission combo, you just want to have the turbine running to get rid of the heat and just use the materials it provides, if you want power, use fusion, boiler and then turbine for power, the only exception to this would be the use of an SPS to make antimatter.
I think the biggest limitation with these generators (with the steam turbine addon) is there aren't any pipes in the game that can transfer the amount of steam it produces fast enough to keep up.
You just need to use multiple ports
@@Mondays3 Yea but that increases lag needlessly so not rlly worth it.
I've personally never found a use for the boiler. I go from wind generators, to a fission reactor, then straight to fusion. I feel like the boiler is unnecessary tbh
you use boilers if you use sodium for fission reactor
Much thanks for this video!
Glad this helped!
dude thankx for trolling me. gg
I think that skipping the crafting steps (since everyone uses a TMI-equivalent) as well as shortening the building would have given you more time to explain how the multi lock actually works, ratios etc.
You cannot have vents in place of the condensers like you said
Great vid! TY for this :)
hey man, great video, watching it on my second playthrough, do you know maybe why I cant connect my Pressurized Tube to both Boiler and Turbine?
idk if youll see this but how to you heat the boiler with the fission reactor?
really good thx bro!
Glad to help!
Does the build in this tutorial still work? I tried to power mine up but it was receiving nothing
It’s better to use a fission reactor to make steam. The turbine itself makes power instead of needing power. The boiler is also more efficient with the fission reactor and using sodium cooling
This is so usefull :D
Thank you so much!
Steam Turbine at 11,000 rpm. & Boiler
Design a Steam Turbine based off of Junkers Jumo 004
Steam Turbine based off of Junkers Jumo 004
my turbine is filled with steam but not working
I don’t get why you would use creative energy cubes when you’re trying to teach us how to get energy though? Why not use something beginners would use. Cause I’m still stuck on wind turbines to power everything you just showed.
These videos are to demonstrate how things are made and how they work. They aren’t a tutorial of how to progress in mekanism. If I showed things like that everyone would just copy the video in their worlds and it would make it boring.
The fun is figuring that sort of stuff yourself. Besides the boiler and turbine shouldn’t really be used together. The fission reactor is your next step. You make a fission reactor for steam and plumb that into the steam turbine then it’s a closed system and just loops
@@Mondays3 hmmm ok. So I think I just kinda misunderstood the reason for your videos. I thought of them as like a step by step kinda tutorial for mekanism. Thanks for explaining.
Does anyone else have problems with the boiler valves?
yep i cant connect it with the pipe gaz
@@Mustang-ql6xi saaaame! it just wont connect?
SO AFTER READING COMMENTS AND COMING TO A CONCLUSION , I THINK YOU CANT CREATE IT ON MC ETERNAL THERE SOME SORT OF RESTRICATION COMING FROM ONE OF THE MOD IN THE PACK SO YEAH .. BUT AMAZING VIDEO JUST WANTED TO LET PEOPLE KNOW
In packs like that the mod author generally change the recipes or restricts things
Yea idk man I tried to do this on mc eternal and it won’t form, it won’t let me form it without the coils and the condensers on the same layer…
I am on mc eternal and it is not working based on the videos instructions, any advice from your experience?
anyone else having an issure where your turbine wont hold over a certain amount? I followed the steps and build a 7x7 but my blades dont spin and it only holds 157kmB
Might more likely be that you aren’t getting enough heat to it to make more steam rather than it not filling up
Спасибо!
I guess we're gonna ignore the fact this boiler had the temperature of a star?
Absolutely
You didn't display your correction that you made and it iterates that the saturation condensing layer goes higher then what it needs be. This video should be re-uploaded with the correct information.
I explain any changes I make in the video or description. I won’t be reuploading a 2 year old video for any small mistakes
11:30 to 13:00 - Turbine Construction
Thank you? But timestamps are already on the video
I must have a mod confliction or something, I followed this guide to a T and can't get the turbine to form.
hmmm very strange. First time I am hearing someone have this problem from my videos. I could be that the modpack author has disabled the turbine but I find that unlikely. Hopefully you have solved the problem by now!
@@Mondays3 I have indeed, it was a mod confliction with Create, although I have no idea why or how. I removed each mod from our server one at a time until finally, Create removed, turbine formed. After reinstalling Create, it worked perfectly fine. I'm at a complete loss for how the two conflicted, however, all is working fine now! Thanks ~
@@RedMephis Glad to hear things worked out in the end
what is the best effective way to quickly generate tons of steam at once, im looking to speedrun my own private modpack and i need lots of rf
Using the fusion reactor is the best way to generate steam to make RF. The fusion reactor can also be used to make steam but it is less efficient than using the fusion to reactor to make only RF
Are these part of base mekanism or the addons?
I know this is old, and I’m currently playing on 1.12.2, so some of those values regarding the steam turbine are outdated on my side, but is there a way of generating more then what a maxed out turbine produces with a maybe similar setup in terms of cost-efficiency, but less size ? I’m looking for a mod that takes me to the next step, I’m currently producing around 400 MRF per tick with my setup, but I’m aiming for the 1 GRF per tick mark, problem is that my world already is starting to lag because of all the fusion reactors, 2 maxed out steam turbines and D-T-Fuel factories.
My goal is to be able to produce enough energy to fuel around 10 replicators from IC2 24/7 without the need to maintain them all the time so I don’t run out on buffered UU-matter. I’m currently on 57 matter fabricators, which is barely enough to run 2 replicators with 19 overclocking upgrades at all times, and just building more steam turbines won’t cut it because of the lag.
Do you have some mod recommendations that aren’t „too overpowered“ ? I still want to have progression in my tech tree.
Edit : I’ve found a solution to that mess, I changed the IC2 mod with IU, and can now utilize switching freely between RF and EU, while using quantum generators to go way above 1GRF per tick. Now I got a new task to focus on, switching out my heavily on IC2 relying industry with IU-components. Kinda annoyed that basically everything breaks now, from my ME-Crafting system to the way I distribute D-T-Fuel to my fusion reactors. Now I need to replace everything before my 600 GRF buffer runs out, wish me luck 😂
I did this and it doesn't work I'm in 1.12.2 tho so I don't know
What is it that doesn't work? Also I think the reason it probably isn't working is because it is 1.12.2
do you know what to do with spent nuclear waste? looks like it doesnt just go away in waste barrels, ive got waste barrels filled with spent nuclear waste and now its overflowing. i dont know how to dispose them, any suggestions?
You can't dispose of it. You can only store it far away
In case you're still interested - solar neutron activators will turn it into polonium, which is still stored in barrels but I think at a significantly lower ratio? It can also be turned into pellets which are 100% safe and are just an item.
@@slaytonpeale9727 that's normal nuclear waste, when you turn it into polonium pellets or plutonium pellets it becomes spent nuclear waste which is completely useless and does not decay
the easiest way to dispose of it is to bring it far away then break the storage container, causing temporary radiation around the area
@@slaytonpeale9727 polonium is super OP and you need it to make mekasuits
While using this more, I found that the power system is very poorly put together even at the very basic level. Everything consumes way too much pretty cheap to make or multiplication, but it’s not like you could multiplied entire stacks nowadays.
Really I didn’t show this in a good way. You want a fission reactor for this. A boiler to use for cooling a coolant and then the steam turbine to make power. Using resistive heaters are a very bad choice and you won’t gain a lot of power
@@Mondays3 ahh I see I have videos which I’ve been extremely but I found very quickly that or duplication and other systems are extremely painful to run at mass. The energy output is just never enough it seems.
Турбина не работает.
no working nice
how big can the boiler be?
I think 17x17x17
i need help
With what?
First like and first comment !!!
CONGRATULATIONS!