How to Replace Rear Coil Spring 00-08 Ford Focus
Вставка
- Опубліковано 27 сер 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/209/b...
In the video, 1A Auto shows how to remove and replace a sagging, broken, bent or rusted rear coil spring. The video is applicable to the 00, 01, 02, 03, 04, Ford Focus.
🔧 List of tools used:
• 19mm Wrench 1aau.to/ofx/1AX...
• 15mm Socket 1aau.to/oxx/1AX...
• 18mm Socket 1aau.to/ogH/1AX...
• 19mm Socket 1aau.to/ogH/1AX...
• 1/2 Inch Breaker Bar 1aau.to/odR/1AX...
• Torque Wrench 1aau.to/oiG/1AX...
• Marker / Writing Utensil
• Floor Jack 1aau.to/oht/1AX...
• Jack Stands 1aau.to/ohu/1AX...
For More Info visit us at 1aau.to/h/bNb/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![How to change rear springs on FORD FOCUS (DAW) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/M-jBxwOuXHY/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Excellent clear and precise demo with good reference to tools and torque settings. A spotless workshop too. I am a lecturer in automotive engineering of 30 years experience and find the entire demonstration well edited and critical points made at suitable stages in the job without excessive time wasted watching bolt and nut undoing. Very well edited
+Eric Edwards Thanks for checking us out! 1AAuto.com
Best vídeo ever on change rear coil!! Great job!!
great video... im going to have a go myself after watching this. thanks for sharing
Theses videos are perfect
After replacing rear shock absorber, rear coils and front struts in a Mazda3 2008 I hear noise only when braking, any idea what’s could be the problem?
Great Video! I had a question, My 2010 Mercedes CLS 219 had both its rear coil springs replaced recently as they were fractured. Following replacement, the rear ride height seems to be a few centimetres more than it was previously. Is this normal? In time, will the rear ride height go back to how it was on the old springs that were replaced? Many thanks in advance.
These newer cars are a pain. The older vehicles were much easier to swap out the springs.
Do we need both top and bottom caps for spring for ford focus
Excellent! Explained well
How did you get the inside arm bolt out? Mine is rusted to the strut. Did you cut out the arm first?
My focus has a roll bar so when you try and move the arm down you can only move it so much its a nightmare to get the spring out.
Eu tenho um Ford focus ano 2005 sofri muito para achar o defeito, não dava cambagem, na suspensão trazeira.de tanto fussar descobri que eram as molas vencidas.e os amortecedores.
The focus cahnged how they do things in 2008. so this should be from 00-07 i do believe..
How do you know the exact height to Jack the suspension as if it was sitting on the ground ?
Does the bottom section of the coil spring use a rubber cushion or isolator or is it just spring metal to control ARM metal
Hi, did you ever find out the answer to this? I'm doing this on my car now and asking myself the same question.
@@kanemorphew5026 Did you figure it out... I might do mine so please pass on any tips...thanks!
Good stuff. Thanks
+Rusty Hook Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
i dont think you need to completely take out the bottom bolt and take out other side.
That adjuster is for toe not Camber
Do you sell the rubber pieces for the new coils?
ive ben looking everywhere for those. any luck?
Where can I purchase that rubber bushing?
Do you have a link?
5:50
+Bryan Htut We do not currently carry the bushings for the 2001 Ford Focus.
fab..you.........las
You tighten the bolts in the lower position, when the car will stand on the wheels permanent tension will be applied to the bushings which will wear them quick
The jack adds tension as he torqued...he did it correctly
"Veericle"
Can you please provide me a chassis number, i waana order the same epring coil.
+yany Thank you for watching. We do not currently have this part available for the 2001 Focus. You could try looking on eBay Motors or partsgeek.com.