How to fix Your hoverboard that won't turn off
Вставка
- Опубліковано 18 вер 2024
- Repair will not turn off the Hoverboard
I'm fixed by change four electronic parts of the main board.
You need change two Transistor and two Capacitor.
That's it.
At the end I want you "please respect the beliefs of each person in the world".
Thank you for watching my video and good luck.
درود بر شما خیلی خوشحالم که یه هموطنم تعمیر و عیب یابی یه برد و به زبان انگلیسی انجام داده
Thank you so much, I changed the two TIP127 Transistors as you advised in the video, and it now switches off and on, perfectly.
Good job. You are welcome :)
You're very welcome. I'm glad you fixed it.
Good Luck
Hello rizwan, i need help
@@sebasmarsiglia3387 yes please?
I just changed 2 transistors TIP127 as my wasnt switch off ! and now it switches on and off. All working fine again. Order it from ebay by typing in "transistor TIP127". Thanks so much .
Yeah, Good job. I'm glad to hear that. your welcome :)
very good info. sometimes one transistor change would suffice (towards edge of mainboard), as was my case
Thanks for making this video . Today my hoverboard got same problem and I found exactly the same part faulty but not all there is pair of swithing pnp transistor one of shorted I replaced by new one and now it work perfectly fine.
You're welcome, my friend. I'm glad that you fixed your Hoverboard and this video was useful :)
Hello, i need help for this problem 😭
@@sebasmarsiglia3387 Hi, What is the problem? Maybe I could help you to solve your problem!
hi ,
is there anyway to check which of the 2 transistor is faulty, and then change the faulty one only? Or we have to change both transistors?
@@maryannsebastianpillai9518 if you familiar with electronics then it's ok just use multimeter to test it. Emitter to collector if not my suggestion is to change both
This is great, seem to be common problem
I changed only the tip127 and it solved the problem
Hi Sirus, Thanks for the video... is there anyway to check which of the 2 transistor is faulty, and then change the faulty one only? Or we have to change both transistors?
Thaaaanks Sirus :D I was looking for this info for a while, it was a lot of help! also thanks for replying in the comments, have a great day
Thank you so much. sorry of everyone I didn't speech louder.
Good Luck
Hello there!
I changed one in the front that I tested without plastic cover, but in the first moment it works, but it broken down again...
So I have to change both the tip127 transistors and the 3 capacitors? Tks a lot!
Pessoal que esta tendo esse problema, prestem muita ATENÇÃO no que irei falar agora: SE SEU HOVERBOARD TEM PLACA DE SOM BLUETOOTH SAIBA QUE É ELA QUE ESTA CAUSANDO ESSE PROBLEMA! TROQUE OS COMPONENTES INDICADOS NO VIDEO E NAO CONECTE MAIS A PLACA DE SOM BLUETOOTH, RETIRE A PLACA DE SOM BLUETOOTH DO HOVERBOARD!
What is the component odent for the 16v 470 uf please? I see C4/2 next to it. I can see the 220 uf is C3.
I was wondering if anyone has found a simple way to diagnose an internal failure of the wheel motor? Maybe using a multimeter?
Also an easy way to diagnose a failed motherboard with the symptom being wheel jerk?
Now that I can see how to repair the issue in the video ( and confirmed my suspicion that it's related to the Bluetooth board) these are the last two issues that are really frustrating me!
Thank you
Hello. for test the motor you can use multimeter (the ohms part of multimeter because it is the self ) but if it's failure it's so hard to fix it and open the wheel and open all wire and put it back I don't think worth it. and for test the motherboard if one of wheel doesn't work you can change the wheel with another side to see witch one have problem wheel or motherboard. and you can test the sensor board like that. I mean if one side sensor board doesn't work change it with other side and you can see where is the problem.
***Just be careful before do anything first unplug the battery (!!!*careful battery 36 V DC it is so danger*!!!) and then be careful to connect all the sockets properly to cause further damage***
Good Luke :)
Hi, First of all, All of the wheel motors is electromotors. So yeah you can use the multimeter for testing wheel motor because they are the coil and you can test them.
And second of all, for mainboard no it's not an easy way. but if you find the datasheet of the mainboard. it is so helpful. because in datasheet you have the block diagram of all elements with all IO and all checkpoints. so it's helpful.
And third, yes normally this problem it comes cause of Bluetooth. because Bluetooth board is crap and they made this problem with power supply part in the mainboard. so sometimes this is happening because of Bluetooth sometimes happening cause some problem in mainboard or battery or some else. OK
Good Lucke
You're gonna replace the transistor marked TIP 127. Its a PNP Darlington transistor. And you replace its complimentary transistor - a NPN Darlington. They work in pairs
Yeah, you're right because of that you have to change both of them. Thank you for your comment.
Turns out it - on the hoverboard I worked on. It was actually 2 PNP Darlington transistors. In many situations PNP's are paired with a NPN. But this case: two PNP's. TIP127's. TIP137's can work too - just a higher amp rating
Yeah, each company mainboard is different! if it's work with your mainboard than well done!
Both are TIP127
Hi my fault was no power or charge. Changed both 127s and now turns on and stays on, is it just the 2 capacitors in addition to the tip127s for this circuit please? I will test capacitors later. When I short the power button connector, it bleeps but stays on, as LED is flashing (7 times) however nothing else connected to motherboard connectors/plugs just bench power supply to battery connector
My brand new hoverboard run time is around 25 minutes then it cut off power of board. At full charge it was around 41.5 V and after 25 minutes the battery voltage was only 37.8 V for cut off. Why is the voltage still so high and already there was a cut off the power?
At wat voltage should the board switch off? Any suggestions?c
Can someone please tell me what the little circuit board in is hand at 2:34 does? Looks like some kind've sound card that plugs into the mainboard by 2 wires (2:22) and also the little speaker. Mines slightly different has a blown module on it. I took the entire card out and turned the hoverboard on. Turns on and works except doesn't turn off. Hit the off button and get a singular beep. Help!
Hi, It is based on Bluetooth sound circuitry. When the problem arises, this circuit is failing and causes a breakdown in the power supply circuit section in Mainboard and you have to change two transistors TIP127 and two capacitors and then the Mainboard will work normally.
Good Luke
Hi thank you so much! I'll go grab those components and swap them out. My bluetooth circuit actually has a blown IC on it, looks slightly different than your bluetooth circuit so i'll replace that too hopefully it works again
Hi. Ok, Good Luck. and for Bluetooth, you can buy one cheap and simple Bluetooth speaker from Amason like 10$ and then open it and take out the board and speaker and disconnect the battery and then put it inside your Hoverboard. you can use the glue gun for that. and for power to give it to Bluetooth, as you know those Bluetooth speaker charging by a 5V power supply and if you have Multimeter you will find 5V at the connector of sensor boards and then connected it. That's it.
Good Luke :)
www.amazon.com/Bluetooth-Lonchan-Wireless-Portable-Subwoofer/dp/B075DCP1SV/ref=sr_1_4?s=electronics&ie=UTF8&qid=1520935396&sr=1-4&keywords=bluetooth+speaker
hi I'm trying to replace this right now but my solder is not sticking is there a certain type I need to use thanks bud
Sorry for late answer.
No, for this case you don't need to use special solder machine. maybe little bit soldering paste it helps!
Good luck
Hello my friend
I desperately need guidance
The Hoverboard turns off in a rough bump and the accelerator suddenly shuts off
Sockets are sturdy
Do you have an email to send me an electronic circuit photo
thanks for your help
Hi, Sorry For late answer!
It's too many things cause that issue! you have to check. Mabe the power button is defect or maybe battery sells or battery control bord is not solid connected, Or maybe mainboard has an issue with cold soldering or layer disconnection, Or software problem and etc. you have to check!
Good luck
I didnt even hear a thing byou said not even with headphones that go really loud
Twinkle Feet
I'm so sorry
Twinkle Feet this man putting me to sleep😂😪
Sirus Alizadeh it okay
Sorry man! it was my first video:(
Mad man
speek up
sorry :(
Speak loud, i didn't hear anything from what you said.
Sorry man! it was my first video :(
Can I have a solution for this
سلام اقای علیزاده عزیز اسکوتر من در سرعت گیرها و دست اندازها و سرعت زیاد ناگهان خاموش میشه و دوباره بعد از مدتی خودم روشنش میکنم
میتونی کمک بفرمایید دلیل این اتفاق چیست ممنون
Can someone help me please ! The on/off button sound is staticky on my Bluetooth Hoverboard , but my music works !? I'm super confused and annoyed . If you know how to fix this please reply it would mean the world to me
Hello. I think this is the motherboard damage. try to restart it and if still doesn't work. you can not do anything because program inside CPU damaged and error.
Good Luke :)
I'm so sorry. I don't understand what are you mean?
What, what’d you say??
In our power button also have exact that prblm that can’t turn off and the thing both weels are stucking at the same time Bluetooth error also hppng
Hi. first, unplug the Battery socket and second, unplug the Bluetooth board and Third, change two Transistor *TIP127* and also change that capasitor in the video I pointed it. I'm sorry I didn't speak louder.
Good Luck
Yours won’t turn off? Mine won’t turn on
3DEAK TP09 ic
slm dadash, dadash man to mashad mishe shomarto bedi en hoverboard mano dorost koni?
Salam, bebakhsid man dige Iran nistam!
Can u tell me if hoverboard not turn on
Hi, Sorry for the late reply. Yeah, if the Hoverboard does not turn on, first disconnect the Bluetooth module if you have and check your power button and the battery, and then check those two transistors and in some cases those two capacitors as well.
@@s.alizade5873 thx for ur interest
@@newlife4965 Sure :)
you talk too
quiet
Sorry!!! it was my first video:(
Hello, i need help for this problem please!
Hi, What is the problem? Maybe I could help you to solve your problem!
@@s.alizade5873
I have a hoverboard that had the same problem, it would not turn off, but still I used it normally by connecting and disconnecting the battery. So I changed the first TIP127 that was burned, the second TIP127 if it worked. But now the hoverboard won't turn on, I press the power button and its lights only blink once. I checked the two TIP127s again and the second one burned out. I don't know what to do 🥲. What do you put those ignition keys on it and not just a normal switch?
@@s.alizade5873 Thank you very much for your attention.
Sir my hoverboard is not turning on please help me sir
is that glidecraft the brand
I'm sorry. I don't know :(
I'm sorry I don't know. it doesn't matter which brand it is. it's work on all brand because all brand has similar mainboard and system.
Good Lucke
No need to mumble and shake the camera constantly
I couldn't understand what u were saying
Hi sorry, I said my English is not good. You should change four electronic parts of the main board.
You need change two PNP Darlington Transistors (TIP 127) and
two Capacitor(470uF /25 Volt) and (220uF / 25 volt). That's it. sorry again
Siroos Alizadeh did this also make the Bluetooth module work? How can you tell the compositor is blown? Great video!
is there any soldering involved? I am having the same problem with my scooter.
Hello. Thank you. Yeah, normally should be work If the Bluetooth module has not been damaged. and If you see a change in appearance such as swelling or cracking or some fatty fat around the capacitor then you can say that the damaged capacitor.
Good Luke :)
Hello. no it's so easy but careful with battery it's so danger and unplug it first before do anything.
Good Luke :)
Talk louder
I'm so sorry that was best i could do. I'm sorry
lol speak up
I'm sorry :(
hi I'm trying to replace this right now but my solder is not sticking is there a certain type I need to use thanks bud
Hi, you need 40-watt solder machine with the normal tip not big. it's not hard you can do it.
Good Luck
hi I'm trying to replace this right now but my solder is not sticking is there a certain type I need to use thanks bud
Use flux in addition
hi I'm trying to replace this right now but my solder is not sticking is there a certain type I need to use thanks bud
استعمل شمع اللحام مع سلك اللحام
hi I'm trying to replace this right now but my solder is not sticking is there a certain type I need to use thanks bud
Hi, you need 40-watt solder machine with the normal tip not big. it's not hard you can do it.
Good Luck