My Samsung Galaxy Note 20 Ultra 5G will not even fit in the bottom half of the mounting case, which is embossed "20 Ultra". Case is not wide enough for the phone. Also, instructions are disjointed and in separate folded booklets with no cross references. TOTALLY UNIMPRESSED!
Just got mine installed last night. Best bang for the buck. The installation was super easy. Love that it comes with a complete kit. On top of that, you get 2 screens and 2 adhessive glue in case you mess up. No more dealing with cheap screen protectors that never sticks or stay on.
Level surface, not just flat which most tables and counters are already. Also, what about the tape they give you to put on the 4 sides to cover any openings like the USB C hole, Sim tray and on/off and volume rockers? Also, the directions say 60 seconds on the top and bottom 2 times?
Get a case where the corners are molded lower in profile. This ALWAYS is compatible with Whitestone Dome. The edges are deliberately lowered in profile for tempered glass screen protectors. There is a UA-cam channel that devotes time in testing this very thing.
I usually use deltashield wet application screen protector films for my phones. I prefer those because they're easier to pull off and less messy if or when you need to replace them. I like glass but those break too easy. And the deltashield film is the best film that I've used so far with the least orange peel and it's super clear.
I've used both and prefer this protector as it's practically like using the screen without one feel and look wise. I agree tho delta is wayyyyy easier to apply and remove.
Whitestone screen protector did not work with my unicorn Beatle pro case. The screen protector install was perfect. Installed the case and yes the case covered part of the screen protector which i was happy about first. Until the case moved in my pocket after a walk and the edge bubbled it (almost as if the case is pinching the protector slowly but surely). by day 2 I started having bubbles in a couple of corners. By day 3 my dog jumped at me when I was seated and the phone dropped and part of the screen protector got a crack (even though it landed on the case and the case didn't even get any marks on it - was a gentle fall and not face down). I learned that most likely the screen protector would have been fine had the case NOT have covered the protector! Hopefully I learned the expensive way so that you don't have to. I am already wondering what to do for my next screen protector purchase. Maybe I'll just get it for the regular s20 since it's smaller not sure
It's all depends on the case and how it was designed. Some just never sit right with a screen protector on as it will just push against the screen protector, causing it to peel off and have all these air bubble after you stick it back on.
I was interested in the camera protector, but a couple of Amazon reviews said that when using the flash the pics come out looking hazy. There was a couple of examples. I look forward to hear what your experience is like with the camera protector. Gr8 vid. 📱
I'm a little bit worried about the spider web lines that could be happen after a while, I heard that from some people on the forums. Have you got any bad experience with this glass?
As I said in my video this is the only screen protector I use for my devices because of how much I trust them. I haven't had any problems with them at all👍
It's happened to me bad with every Whitestone Dome I've used. And my screen also cracked underneath. I would never use them again. I'm glad they've worked for other people though
The installation really blows my mind after all the screen protectors I have applied before) What do you think about the original Samsung protective cases, are they worth to buy? Any difference from ringke cases? Btw, are you planning to repair your broken phone?
After a day in my sup case it began to lift on the edges. Nothing terrible but air did get in there. I wouldn't recommend it. Even while taking it off I had to be careful because it was wedged between the glass and the screen and began to lift some more.
@@Rjay.94 thanks man. i'm currently rocking film layer screen protector and i was planning to upgrade it to WS Dome Glass. but i'm afraid it wont be compatible with the supcase uni-beatle. i guess i should stick to film.
I put mine on yesterday. Removed then rescanned fingerprints. Having an issue with unlocking my phone with my fingerprints now. I have to press real hard and my finger has to be in the perfect spot for it to work :/
@@Josh_Quinonez I literally just rewatched the company's video and saw that it said to register each print twice. I'll try that when I get off work. Thanks for the reply dude!
Your doing things different. The company says use the uv light for 15 seconds on the top 15 seconds on the bottom, take phone out wipe off any excess glue that may have occurred then place phone down and use uv light on the top for 30 seconds then the bottom for 30 seconds. Company does not mention anything about curing the middle. Also you failed to mention that you should use the tape to tape off the sides of your phone that has bottom speaker, and tape off the volume rocker and power button. I understand that you may have done this a million times and you feel comfortable skipping steps, but for a new person that is watching this video for installation, they could potentially damage their phone if liquid got to the sides and bottom without using the included tape. Personally I would put a disclaimer stating that this is my way of installation, for the correct technical way consult the company website.
Yes! It's worth it. Just got mine installed last night. It does come with 2 screen protectors and 2 adhessive glues in case you mess up or the 1st one gets damaged. You have a backup all ready to go.
Looks great and touchscreen sensitivity also good. Only problem is the fingerprint sensor not so great, i have to try several times and sometimes it blocks me and have to use my pass code.
Yes several times and twice for each thumb. Also I looked for reviews and for some it works great for others not. Its frustrating cause due to the curved screen there are not many options for this phone.
It's really not that bad. If you lay your phone flat down on the screen, that part of the screen won't touch because the screen protector will give it a little bit of lift.
people who complain about screen protectors breaking is absurd.A broker protector is its way if saying I just saved your ass.cheaper to replace those rather the actual screen
WARNING THIS CAN DAMAGE YOUR PHONE IS SOMETHING GOES WRONG: These whitestone screen protectors damaged a few phones displays of a Samsung Galaxy S21 Ultra, & Note 20 Ultra I installed it on. The UV Glue got past the absorbing pads and got in between where the Glass display meets the metal frame and cause a permanent large dark spot inside the display on both phones. It damages the displays. Had to pay Samsung $700.00 to replace two displays for two brand new out the box galaxy phones. They wouldn't cover the phones under warranty because the said the glue is considered as liquid damage.
@@Josh_Quinonez that sucks man. Terrible luck. How does the white stone dome compare to AMFilm which is the same thing but half the price? I am looking at options for my s21 ultra that I preordered since I am reading that it doesn't come with a pre-installed protector now for some stupid reason
@@mikerzisu9508 I'll have a video coming soon installing this on my S21 Ultra. It's a really great screen protector that I always use. I haven't used the other one that you mentioned. I might just have to check it out👍
It bothers me when I see someone post an incorrect installation process because they never read instructions or watched an official installation video. Here is an official and correct installation video made by whitestone dome. m.ua-cam.com/video/3TH8sJzmO3g/v-deo.html
@@Josh_Quinonez well if that's true then I've just lost a bit of respect for the company Whitestone Dome. You left things out that are important and in my opinion that's bad for a companies reputation. Just because you did it and it worked doesn't mean it will work for others and if it doesn't then they will form an incorrect negative opinion for the product because they followed your instructions. Whitestone Dome has continually changed and perfected their procedure for a reason... So that the buyer and user achieves a 100% flawless install each and every time.
White dome is OVER RATED AND EXPENSIVE. I wasted my money to it just to make the fingerprint unresponsive. U literally have to press hardly just to unlock your phone. Pls be forwarn. Just try cheap options.
@@billthomas9263 thats what I thought until I installed it myself and the fingerprint worked perfectly fine! There's a high chance those people installed it incorrectly :((
WARNING THIS CAN DAMAGE YOUR PHONE IS SOMETHING GOES WRONG: These whitestone screen protectors damaged a few phones displays of a Samsung Galaxy S21 Ultra, & Note 20 Ultra I installed it on. The UV Glue got past the absorbing pads and got in between where the Glass display meets the metal frame and cause a permanent large dark spot inside the display on both phones. It damages the displays. Had to pay Samsung $700.00 to replace two displays for two brand new out the box galaxy phones. They wouldn't cover the phones under warranty because the said the glue is considered as liquid damage.
Thanks for watching everyone! Let me know if this video helped you out!!👍👍
とても！
だから私はとてもとてもに行きたいそれだけは下手する方が良い感じがしてですけど僕の英語は本当にアニメーションしてくださいましたですよね？🐱
*日です
Did the unicorn beetle work with the dome glass?
I swear applying Whitestone protectors is like a science project
Okay no need to swear. I know mate
It's an art form. .
My Samsung Galaxy Note 20 Ultra 5G will not even fit in the bottom half of the mounting case, which is embossed "20 Ultra". Case is not wide enough for the phone. Also, instructions are disjointed and in separate folded booklets with no cross references. TOTALLY UNIMPRESSED!
Try installing a cheap counterfeit version, now thats rocket science! This things install like a 5 year olds science project.
it's stupid as hell.... 50 bucks for this?
Just got mine installed last night. Best bang for the buck. The installation was super easy. Love that it comes with a complete kit. On top of that, you get 2 screens and 2 adhessive glue in case you mess up. No more dealing with cheap screen protectors that never sticks or stay on.
@@mrvang8077 it's the best!
Level surface, not just flat which most tables and counters are already. Also, what about the tape they give you to put on the 4 sides to cover any openings like the USB C hole, Sim tray and on/off and volume rockers? Also, the directions say 60 seconds on the top and bottom 2 times?
The fingerprint sensor works good at first but after a few days it tends to not read as good. I've done quite a few of these.
Get a case where the corners are molded lower in profile. This ALWAYS is compatible with Whitestone Dome. The edges are deliberately lowered in profile for tempered glass screen protectors. There is a UA-cam channel that devotes time in testing this very thing.
I usually use deltashield wet application screen protector films for my phones. I prefer those because they're easier to pull off and less messy if or when you need to replace them. I like glass but those break too easy. And the deltashield film is the best film that I've used so far with the least orange peel and it's super clear.
I've used both and prefer this protector as it's practically like using the screen without one feel and look wise. I agree tho delta is wayyyyy easier to apply and remove.
Whitestone screen protector did not work with my unicorn Beatle pro case. The screen protector install was perfect. Installed the case and yes the case covered part of the screen protector which i was happy about first. Until the case moved in my pocket after a walk and the edge bubbled it (almost as if the case is pinching the protector slowly but surely). by day 2 I started having bubbles in a couple of corners. By day 3 my dog jumped at me when I was seated and the phone dropped and part of the screen protector got a crack (even though it landed on the case and the case didn't even get any marks on it - was a gentle fall and not face down). I learned that most likely the screen protector would have been fine had the case NOT have covered the protector! Hopefully I learned the expensive way so that you don't have to. I am already wondering what to do for my next screen protector purchase. Maybe I'll just get it for the regular s20 since it's smaller not sure
It's all depends on the case and how it was designed. Some just never sit right with a screen protector on as it will just push against the screen protector, causing it to peel off and have all these air bubble after you stick it back on.
Why didn't you use the side, top and bottom stickers to keep glue out of the ports?
I don't find a need for them. Glue never gets in the ports for me👍
Just watching the process was more stressful than paying for the phone.
Lol
Stressful....pfft! There's just something wrong with you. NOT the product.
I was interested in the camera protector, but a couple of Amazon reviews said that when using the flash the pics come out looking hazy. There was a couple of examples. I look forward to hear what your experience is like with the camera protector. Gr8 vid. 📱
Who still uses flash these days? Lol Use nightmode way better👍 But ill definitely check it out👍
Ok just tested with flash and everything looks good to me👍👌
@@Josh_Quinonez Great to hear. Thnx. 👍
@@WestCoastChicano bro use topace camera protectors i bought them on Amazon and they don't affect the flash u get 4 of them :)
Dirty lens is the culprit.
Is it compatible with a wallet case?
I'm a little bit worried about the spider web lines that could be happen after a while, I heard that from some people on the forums. Have you got any bad experience with this glass?
As I said in my video this is the only screen protector I use for my devices because of how much I trust them. I haven't had any problems with them at all👍
It's happened to me bad with every Whitestone Dome I've used. And my screen also cracked underneath. I would never use them again. I'm glad they've worked for other people though
Is there an update on the beetle case
The installation really blows my mind after all the screen protectors I have applied before)
What do you think about the original Samsung protective cases, are they worth to buy? Any difference from ringke cases?
Btw, are you planning to repair your broken phone?
The Galaxy Note20 Ultra Rugged Protective Cover is really nice, I got the black. Fits the phone perfectly, offers kickstands and looks really good.
is zhat a glue !! & what happen if i wanna remove it ?
Here is my removal video.
ua-cam.com/video/Rd8T82t4CdI/v-deo.html
I put it wrong, can I take it of and set it again?
Any update on how the glass protector held up with the sup case?
After a day in my sup case it began to lift on the edges. Nothing terrible but air did get in there. I wouldn't recommend it. Even while taking it off I had to be careful because it was wedged between the glass and the screen and began to lift some more.
@@Rjay.94 thanks man. i'm currently rocking film layer screen protector and i was planning to upgrade it to WS Dome Glass. but i'm afraid it wont be compatible with the supcase uni-beatle. i guess i should stick to film.
I put mine on yesterday. Removed then rescanned fingerprints. Having an issue with unlocking my phone with my fingerprints now. I have to press real hard and my finger has to be in the perfect spot for it to work :/
Thats weird I barely tap mine and it works👍 Did you scan the same fingerprint twice?
@@Josh_Quinonez I literally just rewatched the company's video and saw that it said to register each print twice. I'll try that when I get off work. Thanks for the reply dude!
@@moo2814 you got it👍
Your doing things different. The company says use the uv light for 15 seconds on the top 15 seconds on the bottom, take phone out wipe off any excess glue that may have occurred then place phone down and use uv light on the top for 30 seconds then the bottom for 30 seconds. Company does not mention anything about curing the middle. Also you failed to mention that you should use the tape to tape off the sides of your phone that has bottom speaker, and tape off the volume rocker and power button. I understand that you may have done this a million times and you feel comfortable skipping steps, but for a new person that is watching this video for installation, they could potentially damage their phone if liquid got to the sides and bottom without using the included tape. Personally I would put a disclaimer stating that this is my way of installation, for the correct technical way consult the company website.
Amazing video on youtube😎👍
Helped a bunch but man that's a lot of steps ☺️😃
whoop whoop new note 20 Ultra
Yup Yup!!
Love your cases
I have a bubble and the screen is not fully covered.....help?
Jqi love your vids and channel but why TF woud you take the phone out of the case?!?!?!
So is this protector worth it?
Yes! It's worth it. Just got mine installed last night. It does come with 2 screen protectors and 2 adhessive glues in case you mess up or the 1st one gets damaged. You have a backup all ready to go.
I thought the protector was supposed to help with fingerprints and oil from your hands/face?... guess not.
It does a pretty good job at that, I just still had some adhesive on my hands.. its like glue.. but now I can't even tell its on my screen👍
Looks great and touchscreen sensitivity also good. Only problem is the fingerprint sensor not so great, i have to try several times and sometimes it blocks me and have to use my pass code.
Did you register the same fingerprint twice?
Yes several times and twice for each thumb. Also I looked for reviews and for some it works great for others not. Its frustrating cause due to the curved screen there are not many options for this phone.
Will this glue affects my front camera??
No👍
I might not be first but I'm still here
💪💪
How is it after a few weeks???
After a few weeks the fingerprint sensor will not work as good. I've done quite a few of these.
I think it would've been better if there was a pinhole for the front camera on the screen protector instead so no screen is left exposed.
It's really not that bad. If you lay your phone flat down on the screen, that part of the screen won't touch because the screen protector will give it a little bit of lift.
I couldn't bring myself to spend $60 for this. I got the LK version on fleabay for $25ish and it's been fine for the month I have had it.
Glad it worked for you, but it's not really a stretch to pay 50 usd to get good protection for a 1.2 thousand dollar device.
Cool thank you so so so much
You got it👍
@@Josh_Quinonez 👍
Where is the picture of wonder woman from
Try downloading Wallpix, app, you're welcome
I need this screenpic ^^
people who complain about screen protectors breaking is absurd.A broker protector is its way if saying I just saved your ass.cheaper to replace those rather the actual screen
1 TB SD CARD TEST IT OUT ON SAMSUNG GALAXY NOTE 20 ULTRA 5G
Everything is fine... whatever... but first tell me, where is Diana(WW)... LOL...
WARNING THIS CAN DAMAGE YOUR PHONE IS SOMETHING GOES WRONG: These whitestone screen protectors damaged a few phones displays of a Samsung Galaxy S21 Ultra, & Note 20 Ultra I installed it on. The UV Glue got past the absorbing pads and got in between where the Glass display meets the metal frame and cause a permanent large dark spot inside the display on both phones. It damages the displays. Had to pay Samsung $700.00 to replace two displays for two brand new out the box galaxy phones. They wouldn't cover the phones under warranty because the said the glue is considered as liquid damage.
First 👊
Yo!!!
Nice video :)
Thank you!
You need PhD to install this screen protector
Cool...
So much for the new gorilla glass
Lol they never said it couldn't break..
@@Josh_Quinonez haha I know
Drops and destroys his phone. No problem, here is a brand new one at no additional cost
😂😂 I wish
@@Josh_Quinonez that sucks man. Terrible luck. How does the white stone dome compare to AMFilm which is the same thing but half the price? I am looking at options for my s21 ultra that I preordered since I am reading that it doesn't come with a pre-installed protector now for some stupid reason
@@mikerzisu9508 I'll have a video coming soon installing this on my S21 Ultra. It's a really great screen protector that I always use. I haven't used the other one that you mentioned. I might just have to check it out👍
It bothers me when I see someone post an incorrect installation process because they never read instructions or watched an official installation video. Here is an official and correct installation video made by whitestone dome.
m.ua-cam.com/video/3TH8sJzmO3g/v-deo.html
I actually did watch theirs first. And they 1,000% approve of mine and still to this day share it all the time👍
@@Josh_Quinonez well if that's true then I've just lost a bit of respect for the company Whitestone Dome. You left things out that are important and in my opinion that's bad for a companies reputation. Just because you did it and it worked doesn't mean it will work for others and if it doesn't then they will form an incorrect negative opinion for the product because they followed your instructions. Whitestone Dome has continually changed and perfected their procedure for a reason... So that the buyer and user achieves a 100% flawless install each and every time.
So 45 pounds for a piece of glass and glue...
i know, right... some people smh
WRONG. WRONG WRONG SUPER WRONG. INSTALLATION 🤣🤣🤣🤣🤣
White dome is OVER RATED AND EXPENSIVE. I wasted my money to it just to make the fingerprint unresponsive. U literally have to press hardly just to unlock your phone. Pls be forwarn. Just try cheap options.
You probably installed it incorrectly. Happened to me few times until I finally installed it correctly and fingerprint works so smoothly!
@@hyelin112 nah it was installed by Whitestone Dome shop. So i doubt. Whitestone is overrated.
@@billthomas9263 thats what I thought until I installed it myself and the fingerprint worked perfectly fine! There's a high chance those people installed it incorrectly :((
Fukking edge displays. Switching back to apple. No solid protection for edge crap.
Glass is glass. Not like apple has secret technology that protects their screens from cracks..
😂😂
WARNING THIS CAN DAMAGE YOUR PHONE IS SOMETHING GOES WRONG: These whitestone screen protectors damaged a few phones displays of a Samsung Galaxy S21 Ultra, & Note 20 Ultra I installed it on. The UV Glue got past the absorbing pads and got in between where the Glass display meets the metal frame and cause a permanent large dark spot inside the display on both phones. It damages the displays. Had to pay Samsung $700.00 to replace two displays for two brand new out the box galaxy phones. They wouldn't cover the phones under warranty because the said the glue is considered as liquid damage.