That's what I like about the Glock 17 trigger I put in my Glock 19. Its rounded versus the HB industries flat trigger I had the the CZ p10c I used to have.
The P-10C is my favorite out of the box, but after sending my G19s to Mac Defense I'm back on the Glock train. The M&P is a good gun, but it just doesn't click for me like the CZ and Glock.
Earl An, great videos and very informative. I’m going to send my G19 slide to Jagerwerks for RMR cut. What backup irons are you running. Thank you sir!
Do you notice a big advantage to rear sight in front of the optic? And also good call on the bang boxes they're awesome. One little trick is to put some Velcro in the back for the lid to stick to. Keeps it out of the way at the range. Good stuff tho keep the vids coming 👍🏻
It’s not a huge difference but I like the extra protection for the glass, and the rear sight never blocks the dot. The smooth rear corner of the rmr doesn’t snag on shirts too.
Earl on your edc glock looks like you us the GL-429 sights do they co witness or are the lower in the rmr window. Do you think the GL-408 would work or would they be to low in the window. Can you do a video on you glock and the back up sights thanks and keep putting out the great vids
GL-408s will work with a ~.280" tall front sight, but they are barely visible in the window. I use them on my P10C since the RMR pocket is .185" deep. Most Glock RMR cuts are between .120" and .125" deep. GL-429 sight picture: 4.bp.blogspot.com/-JTzJGG7P8kg/WuZwLiN3HSI/AAAAAAAABc0/-QhQpAqBoXUPWJ_xrMSQvxDAQii2TChTgCLcBGAs/s1600/IMG_6789%255B1%255D.jpg
On mine, even with 15 dummy rounds loaded in the magazine, there isn't enough spring pressure to keep the slide still. Not a huge deal since it doesn't effect accuracy, it's just annoying during dry firing practice.
I saw a video the CACTICALMAN posted of his 5” 2.0. That entire frame raddles significantly when he shakes it. I get that the firearm has to have lose tolerances but damn not like that. He sent it back to S&W and they said it was “normal”. I think that it’s very unusual although he said it doesn’t effect accuracy. I just ordered a 2.0 3.6” LE and I hope to god the frame doesn’t move like that, dry firing or otherwise.
No problems with the CGW though I haven't shot it much as of late. Only about 200 rounds. No problems with the screw backing out or anything. It feels better than the HBI to me, though I still prefer flat triggers on my other guns for some reason.
Apples Oranges. Primary Machine does a traditional cut with forward recoil bosses. Since they require you to send in your RMR for a custom fit, the bosses are really only there to help locate the RMR as you install it. Battlewerx mills the pocket about .025" deeper. They can get away with this because they mill raised, threaded posts for the RMR screws. The raised posts locate the RMR. In theory, the Primary Machine way is stronger since the pocket is perfectly formed to cradle the RMR during recoil. But since the RMR tolerances are so tight, a universal pocket can be just as tight. I like the deeper pocket of the Battlewerx, but I'm not a fan of the 4-40 screws they use. Even with torx heads, 4-40 is really easy to strip even if correctly torqued.
Mine too, but it moves vertically which is to be expected. Side to side doesn't effect accuracy but it is annoying when dryfiring since the dot amplifies movement.
That's what I like about the Glock 17 trigger I put in my Glock 19. Its rounded versus the HB industries flat trigger I had the the CZ p10c I used to have.
I just ordered my slide milling package from Jagerwerks for my p10c. My slide will be the same as your except I have the black frame.
dude I think you have the best reviews, glad you fixed the audio...
Great series of video's on the CZ P210C Earl. Do you recommend the CZ P210C?
Awesome vid as always! Some seriously sweet setups you got there.
good little video! Keep em coming! Love that Glock barrel too.
Thanks for the video. Of the three, which one do you like the most?
The P-10C is my favorite out of the box, but after sending my G19s to Mac Defense I'm back on the Glock train. The M&P is a good gun, but it just doesn't click for me like the CZ and Glock.
Earl An, great videos and very informative. I’m going to send my G19 slide to Jagerwerks for RMR cut. What backup irons are you running. Thank you sir!
Ameriglo GL-429
Do you notice a big advantage to rear sight in front of the optic? And also good call on the bang boxes they're awesome. One little trick is to put some Velcro in the back for the lid to stick to. Keeps it out of the way at the range. Good stuff tho keep the vids coming 👍🏻
It’s not a huge difference but I like the extra protection for the glass, and the rear sight never blocks the dot. The smooth rear corner of the rmr doesn’t snag on shirts too.
Earl on your edc glock looks like you us the GL-429 sights do they co witness or are the lower in the rmr window. Do you think the GL-408 would work or would they be to low in the window. Can you do a video on you glock and the back up sights thanks and keep putting out the great vids
GL-408s will work with a ~.280" tall front sight, but they are barely visible in the window. I use them on my P10C since the RMR pocket is .185" deep. Most Glock RMR cuts are between .120" and .125" deep. GL-429 sight picture:
4.bp.blogspot.com/-JTzJGG7P8kg/WuZwLiN3HSI/AAAAAAAABc0/-QhQpAqBoXUPWJ_xrMSQvxDAQii2TChTgCLcBGAs/s1600/IMG_6789%255B1%255D.jpg
Earl An thank you so much for the info and pic going to order the gl-429 thanks
slide on the M&P won't move if you put a magazine in
On mine, even with 15 dummy rounds loaded in the magazine, there isn't enough spring pressure to keep the slide still. Not a huge deal since it doesn't effect accuracy, it's just annoying during dry firing practice.
I saw a video the CACTICALMAN posted of his 5” 2.0. That entire frame raddles significantly when he shakes it. I get that the firearm has to have lose tolerances but damn not like that. He sent it back to S&W and they said it was “normal”. I think that it’s very unusual although he said it doesn’t effect accuracy. I just ordered a 2.0 3.6” LE and I hope to god the frame doesn’t move like that, dry firing or otherwise.
What sights are you running on the P10C? Did you have to buy those separately and install them after you got your slide back from being milled?
Front: Dawson P09 Fiber .265" x .100"
Rear: Ameriglo GL-408 .360" tall
Jagerwerks will install them if you include them with the slide.
Did primary include a sealing plate when they installed your rmr on the M&P? I am about to send in my CZ P10c
I don't think so. I sent a plate in with mine.
How is the CGW trigger holding up? Still prefer HBI or this one feels better? Thanks
No problems with the CGW though I haven't shot it much as of late. Only about 200 rounds. No problems with the screw backing out or anything. It feels better than the HBI to me, though I still prefer flat triggers on my other guns for some reason.
earl, who mills a better rmr pocket: battle werx or primary machine?
Apples Oranges. Primary Machine does a traditional cut with forward recoil bosses. Since they require you to send in your RMR for a custom fit, the bosses are really only there to help locate the RMR as you install it. Battlewerx mills the pocket about .025" deeper. They can get away with this because they mill raised, threaded posts for the RMR screws. The raised posts locate the RMR. In theory, the Primary Machine way is stronger since the pocket is perfectly formed to cradle the RMR during recoil. But since the RMR tolerances are so tight, a universal pocket can be just as tight. I like the deeper pocket of the Battlewerx, but I'm not a fan of the 4-40 screws they use. Even with torx heads, 4-40 is really easy to strip even if correctly torqued.
I what to try running a comp on my edc, did you need to go down in spring weight for the comp on your glock?
15# spring for 115 range ammo. Otherwise, 124 and 147 function fine in mine with the stock spring.
My p10c slide moves around when dry firing
Mine too, but it moves vertically which is to be expected. Side to side doesn't effect accuracy but it is annoying when dryfiring since the dot amplifies movement.
who did your stippling work on your CZ p10c
Did it myself. It's functional but it won't win any beauty contests. I send all my frames to MAC Defense now.
That the place in Charlotte NC
No they're in Georgia. I see him in classes down there and just hand him my frames.
What holster do you have for that glock
Armordillo Concealment LUX
What height sights are on your M&P?
Front: Dawson .275" (height above slide)
Rear: Ameriglo GL-408 .360" (measurement includes dovetail)
Earl An I only see the .265 and .285 on their site. I took your advice on the P10c sights, I’m ordering a .265 front.
They're on Dawson's site under: "S&W M&P and M&P Core Fiber Optic Front Sights"