Відео

so I did it. and that gritty feel and spring scratching sound is still present.

Good, thx

Good stuff appreciate the tear down!

Not bad dude you did good i would like to tell you that real avid makes a great punch kit all punches you need to do anything.

Wow! An amazing detailed process, thanks for sharing it! New friend here🎉🎉🎉

You were a bit over cautious with your polishing, but I really liked your video and will use it as a guideline to polish my CZ

Thanks for the excellent video! Took all of the grit after the wall in my P10C.

I bought a p10F and I like it overall but the trigger was a disappointment…it’s not what people hype it up to be. The reset is great but the pull is gritty and heavier than both my MP 2.0s and Shield plus. I may polish using your advice or order an aftermarket set up.

What? So if I get it correctly you replaced the mag release button spring so it’s easier to push then you complain about it being easy to push accidentally. Bro.

One quick tip, I would not use water on anything after you take out the finish, it could rust and ruin the finish. Wet cloth maybe with isopropyl alcohol, or something else other than water wet cloth.

Somehow my wall when i pull the trigger increased in weight. Gonna re-assemble the gun again tomorrow.

I don’t blame you not one but for not taking that little spring out. You the man for sharing!

Anyone noticed magazine insertion issues? So with mine it’s second Gen, when I insert the magazine. Auto forwards but makes a second click as if it’s reseating the magazine????? Never seen this before. I ordered an apex Tactical mag release, hopefully it solves it. I don’t think it affects anything the way it is now just annoying.

Is this disassembly the same for the Optics Ready version. I noticed that the Optics Ready version doesn't have the pin directly above the mag release.

same sights and i got the same issues

I can't beleive I'm admitting this, but I'm brand new to OWNING a pistol. I've shot all kinds of guns, and I've owned shotguns and rifles, but I am brand new to cleaning a semi-auto pistol. Anyway, I'm putting the thing back together after cleaning and oiling this thing to death (I probably go a little overboard, when I'm taking care of my more expensive possessions), so anyway I realized that I have assembled the gun without the recoil spring. So I go to pull the slide back off oh, and guess what? It won't come back off without the recoil spring. So after a bit of mild panic, I find a video that shows me how to do that. Then I go to putting this thing back together and was putting in The Recoil spring, and thought, Oh my God, this thing won't go back together because of these pens that are sticking out from near the back of the pistol. More panic. So then I find another video that shows me how to disassemble the entire slide assembly, which I do. I was trying to put the spring in the wrong side of the slide assembly the whole time. Even my severe ADD doesn't excuse this. Please refrain from expressing your jeers. No one is more affected this bout with reason than myself. I wish I could blame it on being drunk, but I don't drink before or during anything firearm related. Cheers anyway.

Huh...another striker safety plunger that blocks striker at same point the sear engages striker....similar to HK VP9. My issue with this is...what happens when striker breaks at the point where sear engages it? Striker block would do nothing to prevent an accidental discharge in this case correct?? Why not just design it where the block safety would engage a different surface than the sear so 2 different parts would have to fail simultaneously to cause a discharge. To think I almost bought one of these.....

Thanks man, very helpful for my new trigger install.

Great video! Thanks

I just picked up a P10c. I've been watching the hell out of your videos, they're extremely informative. It seems CZ has done away with this type of magazine release and re-designed it to the same reversible release that's on the P07 and the P09. Much easier to deal with.

Great Vid!!! I'm looking to purchase a Killer Innovations slide for my P10-C. Their slides come stripped and this helped me confirm that CZ does not have a channel liner like the glock does. For glock you have to replace the channel liner when purchasing a Killer Innovations slide. Glad my CZ won't have that problem when purchasing one of their slides.

Famous last words before the cursing starts,“ let’s go a little deeper” LoL

Thank you :)

video is really usefull, but the lighting maybe better, it is sometimes hard to see, black parts on black background

Great video. So the goal is to polish the v groove in between the mag release buttons and top edge of the groove too? Then also the lower gloss/polished portion of the mag catch/release silver thing? I just want to make sure I will do this right. I already put this gun through A LOT. Can I accomplish good results with 400-600 grit paper you think? Thanks.

Very bad and overcomplicated design.

Just an awesome vid. Thinking I can reverse mag release this way as well? Thanks, great content.

Excelente video

i polish all the internals of my guns to a mirror shine. its amazing what it does. makes them feel like a whole new gun. everyone always asks what parts im running. they are amazed when i say completely stock internals and it runs better than their "x brand" trigger pack.

Outside of the factory, we’ve also employed the services of an NIJ-certified independent third party to perform testing to the P-10 platform in accordance with NIJ-STD-0112.03, Autoloading Pistols. During this outside testing, P-10s of various configurations/models were subjected to extremes of temperature and environment like sand, salt water immersion and more. Another aspect was extensive rough handling and drop tests. In those tests the P-10 performed as we knew it would - experiencing no failures. The main safety systems, as you’ve mentioned in your write-up, are the trigger safety and the drop safety. Both of these mechanical safeties work to prevent the P-10 from firing without the trigger being pulled. The safety in question is a third safety, known as the ‘automatic safety.’ For the automatic safety to ever need to be employed, either the firing pin, the sear surface of the trigger bar, the trigger bar spring pin or the frame itself would have to fail. In the incredibly rare instance of one of these items failing, the role of the automatic safety is to reduce the chance of the firing pin igniting a chambered round, adding a third layer to the robust safety system within the P-10. There are many factors present in the 'testing' in question that are not able to be present in the P-10 during use in its assembled form. First and foremost, the firing pin travel exhibited in videos of these ‘tests’ is far greater than the maximum firing pin travel reached during the normal cocking/firing sequence (to the tune of 1.5x, resulting in a corresponding increase in inertia within the firing pin). Realistically and in the worst case scenario, were a failure to happen the firing pin would be falling from its pre-cocked position with far less force, allowing the automatic safety to retard its forward travel. When in the pre-cocked position, the firing pin still has 3.5mm to travel before achieving its full travel and being released by the trigger bar. A major factor in all of this is that the designers of the P-10 intended this tertiary safety to function once and as a last resort were a parts failure to have occurred, envisioning it much like an airbag in a car. During normal use of the firearm, the automatic safety never impacts the corresponding shoulder on the firing pin. As such, when called upon those two engagement surfaces are able to make positive contact, hampering the firing pin's forward progress. Subjecting the system to non-standard testing such as this will in no question create undue wear to those engagement surfaces, and the more times the test is repeated, the less chance the automatic safety will be able to perform its function in the rare instance it were needed. Fully withdrawing the firing pin to that overdrawn position will exacerbate this greatly. Like in other instances where faulty information on the internet has led folks to perform ill-advised 'testing' that ends up damaging guns

I thought these guns were supposed to have great triggers from the get go. My F feels like it has a NY trigger. It absolutely sucks.

thank you for your detailed video. Even after 4 years, it is a good source of information! I was wondering if you noticed how thick the polymer is at the end of the beaver tail? ive been having some issues of a bruised knuckle that hits the left corner and I was wondering if i could slowly sand that down thereabouts in the rear pins until it is comfortable (i did my glock trigger guard) as this looks like a major area which may affect the structural integrity of the pistol? Thank you

thanks great video ..at last I can disassemble & reassemble my CZ P-10C when I come home..

Very good stuff, thank you! One small suggestion. Next time maybe consider securing the Dremel and a vise or clamp, then hold the pieces and manipulate them. I think you'll find that you have a lot more control. Good luck.

That seems like a dangerously low amount of dwell time. Why would they let the gas port be so close to the muzzle?

Did you have a tuff slide release, could that be polished to ease it up

I've got about 3000 eds through mine and I love it.i cleaned one oiled mine up before I ever shot it.went to my range and was hitting man size steel targets at 100 yes with no problems as fast as I could pull the trigger.never had to adjust the sights

I AM WORRIED ABOUT THE CZ P10C OVER THIS WEAK STRIKER SAFETY BLOCK, CAN YOU PLEASE DO A VIDEO REVIEW AND ANALYSIS OF THIS SERIES OF VIDEOS ON HIS CHANNEL ua-cam.com/video/rKIUpTDbn6o/v-deo.html www.reddit.com/r/CCW/comments/cqshim/psa_the_cz_p10c_appears_to_have_no_functional/

Shoot your bloody guns!

Testing the weight on the trigger the higher up on the trigger you test the higher the weight it will read

Way to many parts and roll pins thank god for Glock.

Great video, thanks! Also, Im super jealous of your workshop....

Thank you for this video! I just got my p10c back from Primary Machine for slide mill for RMR and the whole gun in cerakote

why the fuck post this vid with that title kmft....

Nice video and nice job! Did it without a $150 jig too

good video! I will never do this though! That’s way too much damn work to clean a gun !

And yall were puttin holes in the van why? Looks like tons of fun!!!!

You don’t know what a roll pin is...change my mind

Lol you aren’t going to take metal off with a polishing wheel and mothers. Polish it if you’re going to do it.

Nice shooting