Koss Porta pro MMCX detachable mod Tutorial
Вставка
- Опубліковано 8 вер 2024
- Have an old pair of Koss Porta pros lying around? This mod might be for you!
Buy Koss Porta Pro here
amzn.to/3blOF6e
Yaxi earpads
amzn.to/3nOWdED
Repair Headband
s.click.aliexp...
Parts used
MMCX female socket
s.click.aliexp...
Epoxy Putty
amzn.to/2JKzWGz
s.click.aliexp...
Clear Tape
amzn.to/3c2T0Mh
s.click.aliexp...
Blu Tack
amzn.to/2RkJYT4
s.click.aliexp...
Enamel coated wires
s.click.aliexp...
Tools list:
Tools:
Soldering Iron Set (Stand + Iron + Cleaner)
220V amzn.to/2xexOnB
220V s.click.aliexp...
120V amzn.to/2wlSfP4
120V s.click.aliexp...
Solder
amzn.to/2x2oHGQ
s.click.aliexp...
Wire Stripper
amzn.to/2VbSODD
s.click.aliexp...
Scissors
amzn.to/3aW6ZmR
s.click.aliexp...
Consolidated parts links list:
docs.google.co...
Full Tools Links List:
docs.google.co...
*all links are our affliated links where we get a small percentage of commission should you decide to proceed with the purchase. This is one way we can continue to come out with more content and we thank you all for the support!
[NAKED audio Tutorial & Reveal]
We are a new channel from Singapore. sgaudiohive specializes in audio cables, earphone / headphone repairs and modifications and IEM building. Do support us by subscribing and following our social media!
[WEBSITE] : www.sgaudiohiv...
[BLOG] www.naked-audi...
[FACEBOOK] : / sgaudiohive
[INSTAGRAM] : / sgaudiohive
[EMAIL] : sales@sgaudiohive.com
[WHATSAPP] : +65 9889 4483
Koss should have done this themselves
but still one of the best headphones for under 50$
Your the man... Mang!
Not a lot of headphones with detacheable cables in this price range tbh, apart from ChiFi in-ears..
If you want 75 dollar Porta Pro`s, sure, but they`re made to fit a price bracket.
I just did this mod on my porta pro's! You make it seem easier than it actually is. It took me 3 days and a lot of frustration to do this but now they look great and sound great. Thanks!
I have been modding and soldering for years but I have never thought to use a piece of putty to hold down what I am working on so that I no longer need to grow a third hand for soldering. Thankyou!
I used this stuff called milliput to glue the connectors in. It's a epoxy but it has the consitancy of blutac so you can mold it into shape by hand. Perfect for this sort of thing in my opinion. Just remembered I wanted to share that.
Hey there! Milliput is a brand of epoxy putty and it's exactly what we use for molding and fixing the connector!
This is the type of attention to detail with links to all parts is what id want to reward. High value video.
Ill add a personal thank you since think it went above and beyond a mere like.
Really appreciated for the kind comments!
Ended up breaking the cables on mine so it's time to finally do the mod.
I was wearing them and my dog jumped up and caught the cable pulling it off of one of the drivers. I checked and the pads are still fine though the strain relief thing completely snapped off.
well how was it now?
@@korbi119 They work great :)
Breaking the cable is a given seeing how flimsy it is, and non detachable. Unforgivable that they made the cable like that imo
Thanks so much, had a clue for my ksc75 and kph30i, though the kph30i seems to have a different casing, hope you could mod that too someday!
Legends uses blutack as a 3rd arm!
Well explained video and a link to all the parts you've used. You are the true MVP.
Absolutely superb! Perfect. Simple, clear, and to the point. 10/10
Thank you very much!
Still wearing his Pebble watch! Now that's a true professional.
my soldering looks awful, but who cares if it's inside =) Thanks a lot. You literally saved my broken headphones.
You can clearly tell this guy have done a couple houdred of this once amazing!!
your soldering is very neat
Ok, I love the guides and all but my main request (for this video and all your koss ones specifically) can we get a parts list for the parts that you used?
I really would like to know what parts and cables you use (really hard to find y-split covers or just which wires to buy)
Really want to mod my 4 pairs of koss headphones (2 portapros, 1 sportapro, 1 ksc75) and a few other headphones I have but finding parts (the right parts) seems harder than the work itself
Great work tho, love the channel!
We are trying to do up a consolidated lists for parts and should be posting them on our tutorial blog on our website and also on the new tutorial series
@@sgaudiohive tyty!
Modding the KSC75's with an mmcx connector with the thingiverse thingy is SO hard. It made me never want to solder again. I hope it's worth it. Thanks for the tips from the porta pro mod
Glad to be of help!
heyo Im trying to do the same with my KSC75's. Howd it go for you?
I just ordered a set of KSC75's What is the thingiverse thingy you are referring to? My friend has a 3d printer and I was wondering if the thingiiverse part is essential to do the mmcx mod?
@@brendan6093 Uhhhhhh i have no idea where to link you to it's probably easy enough to find by googling. I'm pretty sure that you're going to want it if you're doing the mod. It raises the connector off of the headphones so you have clearance for it. You may be able to dremel/drill out a large enough hole in the normal plastic thingy but i wouldn't condone it
@@tn0wl361 perfect I will get onto printing some. After further research people have managed to fit the mmcx by dremelling but I don't think there will be much plastic to work with besides I do like the 3d print design as it looks awesome and is customisable colour wise and design wise
The little cable covers on the stock Porta Pros are quite fragile, broke both on one side, and one pin in the other. Found it easier to remove the cover on the KSC75s.
The tabs only goes one way up so have to really pry them slowly
Thanks for the share. excellent, precision work right there...
Any chance you could make an updated tutorial for this but with the koss portapro speakeasy / communication headset. I'm also wondering is some sort of shells could be 3d printed for the microphone of said headset, to make it more directional. perhaps improve the quality as well
love the work and explanation
Love your channel but I have a very small ear canal so I cant use in earbuds so can you recommend Half in earbuds with good bass please as I find it hard to find reviews on youtube thanks Bob in the UK
thank you boss ahhhh
Any way to do a 3.5mm connector instead of the MMCX?
You can but there's not much space on the inside, have to do it on the outside
I just noticed Koss porta pro is 60 ohm headphone but mmcx connector rating is 50 ohm so does it mean it will change sound or what?
Curious
The volume will go down since there’s more resistance to get to 60ohms. You most likely need to turn the volume up more. Maybe us a dac if you want full sound like before. 10ohms then again won’t make a big difference.
Great work man.
I just tried it and I rewatche the video 4 times to make sure this was the case. I did do it correctly...but now my headphones aren't working now...
Can you also do this on KSC75
its really similar but still it will be pretty great
hi, thank you for the tuto. Where can i find the little color wires to weld the MMCX conectors...? have you a link please..? and what is the paste you use to hold the wires and connectors for weld...?
The paste is called blue tack. The colored wires, you can strip off any old earpiece wires and you will have access to a lot of those
Great video. Question: how do the replacement grado pads compare to the yaxi in terms of sound quality?
I haven't got a chance to try them, but looking at the density i would think the grados would fare better on the mids and highs
do you think it is possible to do this in an akg k414p? could you make a tutorial?
My man's soldering fast af
Everything he does is fast AF 😂👌🤖🚬
I just broke my prota . cos my iron soldier isnt hot enough to soldier. so all of it was burn inside instead 😢
THANK YOU!!
I failed to do this mod. The mmcx terminals are so tiny. You need really good eyesight! Ended up soldering the stock cable back on.
The links I have in my video should have a version where it's already soldered and ready to purchase
does a different cable affect the audio quality? been thinking of doing this mod for quite some time
that white porta pro looks hella cool where did you get it?
It's the limited "Ice Cool" Edition
Please make a video for mi hybrid pro HD DIY wire replacement
I dont have that Iem currently
Great mod! Can you please make a tws bluetooth adapter? I wanted to make one for myself but I don't how
When I'm done with my full review and mod on the qcy t5 I will do the adaptor tutorial
I'm not the person who asked but I'd love to see a bluetooth adapter tutorial too~~ :D
Bought a second pair of porta pros to try the mod, seems fun
Also, where did you bought the shiny MMCX cable? I'm looking for a cable with a color like Dunu Hulk without breaking the bank.
The wires are hand built by me, there should be a lot of these wires in the market
Thank you for tutorials. Will you also make a video for Grado's detachable cable? Perhaps using SMC/sma connectors? There's some videos online, but they don't show which part is ground on the female SMC mount or on the drivers itself to solder. I hope to put together a wooden Grado headphone from scratch. This is my first time attempt. I found some parts on Etsy for the headband, gimbal, wooden cups, but nothing on the mounting connectors. Any links to parts would be appreciated. Thanks again for your time.
Anything else outside of the centre pin that is gold plated is the ground. If you were to build on of these, I suggest a more efficient connector like 3.5mm as SMC is not suitable for a dual input design. You can check out what happens to the older SMC hifiman cables after some use. For connectors almost any hardware store should have those as they are general purpose
@@sgaudiohive Thank you very much for the advice. I hope your channel grows big. It has lots of informative videos for novices such as myself. It is great for the community.
Thanks! Will will strive to do 100% coverage
How do you find the connections in regards to life span? I think RF push connectors only have a 100 push click life expectancy or something like that. Have you found issues with them wearing out? Also after searching MMCX online I see they have impedance ratings. Does this matter at all when choosing which one to use? I'm interested in doing similar with a vintage set of Pioneer SE-6's I picked up which doesn't have much room for modding.
These MMCX connectors are used fairly often for this with the more expensive in ear headphones.
When you tinned the cut cables, I have not seen you use flux I believe because you use rosin core solder which has flux already, but some forum modders insist on using flux anyway as they think the flux included with it is not enough. I need clarification please I want to try soldering.
depends on what solder you use, most cheap older can't adhere even when it is rosin core
I’ve recently replaced the cable of my two Porta Pros, but their sound became much worse after the replacement. What can be causing the issue? They seem completely different headphones.
It's highly likely you wired one of the side in the wrong polarity if the sound change is drastic as the stock porta pro cable is a very standard quality and almost all replacement will be better
Can i do the same way to my ksc75?
I wanted to do DIYs like this but my hands are really shaky
@0:29 "Same same but different" 😂😂😂
Plz make a video on left earphone fixing
We have already
@@sgaudiohive I got it
Thank you 😊😊
I want to buy these headphones and im thinking about doing this because i saw some reviews that people say koss porta pros only lasts for a couple months. If that happens i can't buy it again cause they are expensive here. Is it worth to do it? I want a permanent solution.
you can plan for it
Can i use the short mmcx connector?
Yes, just drill a different sized hole and at a different height
@@sgaudiohive ok, thanks man ✌️
can you do the same one for bose soundsport?
no
What solder gauge would you recommend?
Do you mean solder size? Usually 0.5-1mm
ksc75? love the videos btw!!
I don't have a set of that yet, trying to buy 1
i hope they come back on massdrop because i think they had international shipping for not too much!
why the jack on unmodified one is straight and not angled
Do you offer services for modding porta pros?
Yes we do, can contact us via our sales channel
Sgaudiohive WhatsApp link wa.me/message/MONLIVKYZB3TF1
sales@sgaudiohive.com
Can we get a link for peds?
no
wer r u now?
grado mod next
Oh yes definitely!
Thanks for the tutorial but it freaks me out how you manhandle everything so quickly..! 😅
You are French.... dont you?
Just check the description
Why?