I’ve been on the rails about trading my jeep in for a new Ranger XLT… After watching a few of your videos I’m really starting to lean towards getting one. They’re really nice trucks and it looks like you can really fix them up nice with a few aftermarket products. Thanks for the videos!
Love the truck and what you guys are doin at stage 3. For the off-road lights, would it be easier to wire them through the grommet in the driver side footwell?
I didn't see anywhere that I could easily get the wires to down there on our truck, but that certainly doesn't mean it's impossible. You might be on to something. I'm curious to see if someone figures out a better work around as people keep modifying these Rangers
I noticed the truck has new wheels. Are you going to make a follow up video on the new wheels? Did you remove the wheel spacers? What is the size and offset of the new wheels?
We have a video coming soon that will walk through the new suspension setup and details on the wheels and tires. The quick rundown is that we took the wheel spacers off and put on 17x9.5" Black Rhino wheels with a 6mm offset. Hope that helps!
I just install mine, i went with the Fifteen52 TurboMac HD , 0 Offset and 265/70/17 BF tires, i had to take out some chassis extensions, if you notice in min 1:13 it shows what im saying, they had to do it too
Hi Floyd on this setup we're running a fox stage 1 kit 17x9.5" Black Rhino wheels and LT285/70R17 tires you can read more about this setup and purchase all of these parts over on our dedicated build page just click this link! hope it helps and can't wait to see your ranger come to life! www.stage3motorsports.com/Stage-3s-2019-Ranger-SEMA-Overland-Truck-Build.html
The factory fog light housings are completely removed and replaced by the Baja Designs Squardons, but the kit still uses the factory wiring. We'll have a full install video on that coming out shortly!
We'll show the output more when we do a full review of this light kit. I prefer to show that stuff in real word settings instead of trying to fake it in a shop.
@@NoahStage3 10-4. I'm a low beam only till conditions warrant more light type of guy. How much more light do the fog lights put out on the ground in inclement weather vs the stock assembly?
@@danatkinson6698 Good question. Based off the little bit of seat time I've had with them so far I'd say they pretty much double the output of the factory fogs in terms of brightness. They also seem to cover a bit more distance. I'll be sure to report back in more detail with that review once we have it ready!
Andrew Jaballa I believe they have a link & sell them as a Retailer. Otherwise, you can find BajaDesigns lights on many online Retail sites. Those lights are pre-wired as daytime running, so it should be plug & play. My lights have Deutsch connecters, so it was easy.
Ford Builds the best Trucks.
I’ve been on the rails about trading my jeep in for a new Ranger XLT… After watching a few of your videos I’m really starting to lean towards getting one. They’re really nice trucks and it looks like you can really fix them up nice with a few aftermarket products. Thanks for the videos!
Badass Ranger! I really love that look
The Ranger is lookin bad ass!
Would really love step by step videos.
Check out the step by step install videos by clicking the link - ua-cam.com/video/1d70n7ZfNzQ/v-deo.html
It'll look great on my Ranger Raptor...
any tips on where i could find information to take the front bumper off so i could take off the crash bars without cutting
Love the truck and what you guys are doin at stage 3. For the off-road lights, would it be easier to wire them through the grommet in the driver side footwell?
I didn't see anywhere that I could easily get the wires to down there on our truck, but that certainly doesn't mean it's impossible. You might be on to something. I'm curious to see if someone figures out a better work around as people keep modifying these Rangers
I noticed the truck has new wheels. Are you going to make a follow up video on the new wheels? Did you remove the wheel spacers? What is the size and offset of the new wheels?
We have a video coming soon that will walk through the new suspension setup and details on the wheels and tires. The quick rundown is that we took the wheel spacers off and put on 17x9.5" Black Rhino wheels with a 6mm offset. Hope that helps!
I just install mine, i went with the Fifteen52 TurboMac HD , 0 Offset and 265/70/17 BF tires, i had to take out some chassis extensions, if you notice in min 1:13 it shows what im saying, they had to do it too
Great, thanks!
Do you have the link for the Raptor grill lights that are compatible with the actual Ranger Raptor?
Looks awesome
Can you please tell me your lift / leveling kit / size tires. Love the set up. Wanna do that to my two full size door ranger
Hi Floyd on this setup we're running a fox stage 1 kit 17x9.5" Black Rhino wheels and LT285/70R17 tires you can read more about this setup and purchase all of these parts over on our dedicated build page just click this link! hope it helps and can't wait to see your ranger come to life! www.stage3motorsports.com/Stage-3s-2019-Ranger-SEMA-Overland-Truck-Build.html
Really sweet truck!
How did you get the wiring through the door fender?
Do they make an LED white square lights that fit where the amber ones are in the grille, with a factory harness?
Great video, but what happens to the original fog lamps?
The factory fog light housings are completely removed and replaced by the Baja Designs Squardons, but the kit still uses the factory wiring. We'll have a full install video on that coming out shortly!
@@NoahStage3 did the review video ever release?
How’s the quality of these lights vs the rigid ones you put on the raptor f150? Do they offer the rigid lights for the ranger? Thanks
What the purpose of the hood lights? How can you use lights so far back and so high ?
Where did you get the raptor lights in the grill?
Click this link Rico www.stage3motorsports.com/2019-Ford-Ranger-Raptor-Style-Grille-Light-Kits.html
How about a before and after light output shot of each light added
We'll show the output more when we do a full review of this light kit. I prefer to show that stuff in real word settings instead of trying to fake it in a shop.
@@NoahStage3 10-4. I'm a low beam only till conditions warrant more light type of guy. How much more light do the fog lights put out on the ground in inclement weather vs the stock assembly?
@@danatkinson6698 Good question. Based off the little bit of seat time I've had with them so far I'd say they pretty much double the output of the factory fogs in terms of brightness. They also seem to cover a bit more distance. I'll be sure to report back in more detail with that review once we have it ready!
@@NoahStage3 10-4 thank you.
What tires and rims are on that truck?
Looking to go this route with my 19 ranger as well. Where did you get the amber day running lights?
Andrew Jaballa I believe they have a link & sell them as a Retailer. Otherwise, you can find BajaDesigns lights on many online Retail sites. Those lights are pre-wired as daytime running, so it should be plug & play. My lights have Deutsch connecters, so it was easy.
What u doing with the stock lights?
Would these fit on a 2018 f150 fog lights?
As long as you get the right mount you shouldn't have an issue, give us a call to get the proper setup! 623-434-5277
I was hoping for a step by step video. But he just talked all the while.