How to bleed clutch pedal from Acura Integra 94-2001 DIY

[@map382101]

Helped me a lot thanks man

[@jpscrx]

Glad it helped 😁

[@carloriveralol8276]

My clutch works fine but it gets low on fluid like every month is that bad?

[@jpscrx]

Carlo
Trace from the clutch pedal to the transmission, you should see a seepage of some sort coming from the slave cylinder or connector lines. Check fire wall and look under engine/ transmission there should be a wet spot.
John

[@grusive]

Same.. I feel like maybe there might be a leak or something

[@jpscrx]

Might still have air pockets in the lines, try to bleed it again. It should be a noticeable improvement.

[@jpscrx]

@grusive
If there is a leak it should be visible.

[@claytonmoore2469]

I did that and I still have no pressure in my clutch :/

[@jpscrx]

Trace line from clutch pedal to slave cylinder, usually slave cylinder go bad and you’ll see seepage going onto ground.

[@claytonmoore2469]

@@jpscrx the slave was replaced before I did the master and the slave worked

[@631NY]

Same problem smh