Corsa 1.2 coolant leak COMMON FAULT

Поділитися
Вставка
  • Опубліковано 4 гру 2019
  • Link to a coolant pressure tester amzn.to/3PjZlGc
    As an Amazon Associate I earn from qualifying purchases
    Poor design leads to the coolant housing failing and massive loss of coolant.
  • Авто та транспорт

КОМЕНТАРІ • 53

  • @hadesbearer
    @hadesbearer 2 роки тому +5

    The tip of the overflow pipe had actually snapped off inside the old housing. Which is why the new one looks prouder. I had the same problem with a minor leak cased by this and had to dig the snapped end out with tiny hook made from a coat hanger so that the replacement would fit. This video helped me spot the problem as the crustyness was covering up the breakage. Thank you.

  • @galaxy5am987
    @galaxy5am987 8 місяців тому +1

    Vauxhall:
    lets make a vital part of the cooling system that handles scolding hot coolant out of plastic. Ingenious.

  • @seanwallace1972
    @seanwallace1972 3 роки тому +3

    That’s was a great video very helpful,as it’s a common problem,
    I wish you had sent time lapsed the removal and fitting of the part,
    But very helpful though what was the specific name of that part please

  • @thpxs0554
    @thpxs0554 3 роки тому +9

    They also lose water from the big gasket behind the timing chain, the one the water pump goes against , if you’re losing water and your head gasket is good, no overheating, and a pressure test doesn’t reveal an external leak then it’s most likely that, I’ve done loads of them. May as well buy a chain kit cos it’s got to come off anyway, and it’s bound to be rattling. and sump and rocker gaskets, these engines can leak everywhere. But run forever.

    • @MTMMotorServices
      @MTMMotorServices  3 роки тому +4

      Yep you're right. Whenever I do head gaskets on these engines, the timing cover gasket which is part of the coolant pump gasket always looks to be leaking.

  • @markalmeida3816
    @markalmeida3816 2 роки тому +1

    Thanks great vid, where can I get the pressure test kit from, thanks in advance.

  • @MohammedAsif-tn6bl
    @MohammedAsif-tn6bl 3 роки тому +2

    Hi, what is this part called that you are replacing please?

  • @JamesBrown-dz5tl
    @JamesBrown-dz5tl 3 роки тому +1

    Where can I get the pressure test kit from? I think I got a small leak as mini puddles on drive and had the same issue as what your customer had. I’m wanting try everything before I go down the head gasket route as the engine was rebuilt apparently before I brought it. A week into owning a hose split so feel like possibly another leak somewhere?

  • @MOSHOODism
    @MOSHOODism 3 роки тому +2

    Hey man great video I was wondering where could I get that pipe from?

  • @morganwatkins5339
    @morganwatkins5339 3 роки тому +2

    Great vid mate. Got this problem now hence the search 👍

  • @SnGrg
    @SnGrg 4 місяці тому

    Hi there, great video, wondering how much PSI should i load from my pressure pump to the coolant cap to spot the leak but not overload the system ?

  • @SniperAddy
    @SniperAddy 2 роки тому

    Any idea of coolant mixing with oil, i serviced the car and topped up coolant, within a week it was empty and car spanner light was on, and coolant light was flashing ???

  • @nathanhuitson1418
    @nathanhuitson1418 Рік тому

    Do you not need to bleed the radiator?

  • @blakefletcher9834
    @blakefletcher9834 10 місяців тому

    i have the same car, i've got it into a garage so i don't know for sure that its the same issue, but i had topped up coolant before setting out on a drive, and not even a mile into the journey steam and possibly some smoke was coming from my car and the recovery guy told me there was no coolant in there at all. Do you see this alot on these cars?

  • @successHacksHQ
    @successHacksHQ 2 роки тому

    I have a leaking coolant Corsa 1.2.... and also a head gasket issue as the engine oil is now looking milky.

  • @moh_del
    @moh_del 5 місяців тому

    Hello Could you please what these pipes are and cost? Vauxhall corsa 1.0 has different coolant flange?

  • @Shopinuk
    @Shopinuk Рік тому

    How much normally people charge for replcing that pipe

  • @call.that.eventing3916
    @call.that.eventing3916 2 роки тому

    Interesting video thanks - and enjoyed your accent 😄

  • @scotiajinker8392
    @scotiajinker8392 2 роки тому

    Have you guys seen any mokkas with coolant leak problems?

  • @-BY205
    @-BY205 Рік тому

    same with my wifes Corsa 2011 1.2 16 valve thx

  • @Trappedttv
    @Trappedttv 3 роки тому +1

    Hi,
    I have the same car as you but for me the water in the tank keeps draining immediately and the thermostat on the dash keeps flashing red when I drive. Do you know what problem would be causing this as now my car overheats quickly, not sure why ?

  • @beattrixer7947
    @beattrixer7947 3 роки тому

    How would you go about emptying the old coolant completely and replacing with new one?

    • @MTMMotorServices
      @MTMMotorServices  3 роки тому

      Some radiators have a drain plug on the coolant radiator which you can undo. Otherwise you can take off the lowest coolant pipe and allow it to drain out that way.

  • @evieemaya88
    @evieemaya88 4 роки тому

    Great video. Can inask when u pressure tested the car did you need to plug the overfill spout? I tried pressure testing a Corsa and it was building no pressure for me to check for a leak. The car isnt losing coolant was.just.more curious to know

    • @MTMMotorServices
      @MTMMotorServices  4 роки тому +1

      Arts&Trusts , if you’re using the correct adaptor, it should seal below the spout and at the thread base. If you take off the coolant cap you should see 2 seals. The adaptor you use to build pressure should look the same.

  • @Jack-wr5wg
    @Jack-wr5wg 4 місяці тому

    Good video!

    • @Jack-wr5wg
      @Jack-wr5wg 4 місяці тому

      I can't find my leak but I think it is the flange it is dripping above the starter motor ,
      Australian holden astra 2004 my configuration is different. any ideas mate.

  • @successHacksHQ
    @successHacksHQ 2 роки тому

    Pls I am in Aberdeen...how can I meet you

  • @meron5303
    @meron5303 4 роки тому

    Thanks for sharing this helpful video mate, I've got Vauxhall corsa 2013 with the same problem and where can I find the the part? Can you please share the part link or anything thanks.

    • @MTMMotorServices
      @MTMMotorServices  4 роки тому

      Hi, we used genuine vauxhall parts. There can sometimes be a variant of this part, What I would suggest is calling your local dealership, speak to the parts department. Give them your registration number so they can look up the spec of your car and ask them for a price on the part and also ask them for the part number. Then atleast you can use that partnumber to search online for cheaper alternatives.

  • @martinsnowden4926
    @martinsnowden4926 3 роки тому +3

    Hey guys great video this is what’s going on with my car. Rough idea how much this would cost to take in a garage to fix. Thanks

  • @Rob-eg8qc
    @Rob-eg8qc 6 місяців тому

    I have fitted the third of those cheap plastic things on my 2011 1.2 corsa d, saying that it's nearly done 179,000 miles so can't complain, great video for showing someone how to fit one themselves 👍

  • @briangowland9034
    @briangowland9034 3 місяці тому

    It would have been nice if you could have pointed out what bits needed to be removed and and where the bolts / screws were instead of fast forwarding through. I've got the same job to do tomorrow and I'm just guessing at what to undo. The three Torx bolts are the easy bits but the others aren't clear to me.

    • @MTMMotorServices
      @MTMMotorServices  3 місяці тому +1

      This was an older video, I think I'll do a revised version.
      Sorry for any miscommunication

    • @briangowland9034
      @briangowland9034 3 місяці тому

      @@MTMMotorServices Thanks for reply. I'll probably work it out but typical Vauxhall, that housing is a bit buried under a few things. Only had the car a few days and that little pipe blew off just as I was parking in a supermarket (big cloud of steam). The pipe doesn't clip properly and housing a bit worn. I'm replacing both.

  • @rikiwatkins9539
    @rikiwatkins9539 Рік тому

    Bit of a long shot but where are based mtm???? Got a similar issue with my son's corsa....loosing coolant but not sure where. Had the waterpump replaced, and there doesn't seam to be water in the oil???????

    • @MTMMotorServices
      @MTMMotorServices  Рік тому +1

      We are based on Sandy Rd, Llanelli, South Wales. We will be happy to take a look at it if you can get to us. 👍👍

  • @amarmatloob9624
    @amarmatloob9624 3 роки тому

    Hi, the housing you are referring to is that the thermostat housing?
    Thanks

    • @MTMMotorServices
      @MTMMotorServices  3 роки тому

      Hi, no this is a housing on the side of the block which houses a temperature sensor. the thermostat housing is on the other side of the engine.

    • @amarmatloob9624
      @amarmatloob9624 3 роки тому +1

      @@MTMMotorServices thank you

    • @amaan9950
      @amaan9950 2 роки тому

      whats the part called which you took off?

    • @johnmchardy4502
      @johnmchardy4502 2 місяці тому

      Vauxhall refer to it as a coolant flange

  • @Philunited
    @Philunited 4 роки тому +2

    Water pumps are awful on them corsa too nothing good about them engines 🙈

  • @itswais77
    @itswais77 3 роки тому

    Fix it soon or your engine is cooked loool, had one that was cabletied for a while on the housing then head gasket went because air got into the cooling system and snuck into the combustion chamber

  • @katwells3755
    @katwells3755 4 роки тому

    I have a very small leak cant find it. It looses half a litre every full tank. Its doing my nut in lol

    • @MTMMotorServices
      @MTMMotorServices  3 роки тому +1

      if your coolant is is rich in antifreeze then normally there can be some staining on the engine which can be an indicator of where it could be leaking from. i would also put a coolant pressure tester on the system like in this video. it allows you to pressurise the system to force it out of where its leaking from. this is alot easier and safer than waiting for the car to come to temperature and pressurise itself.