Honestly, you diagnose and explain very nicely. I will watch it once again surely. Could you make a full maintenance video on these kind of unit ? And also you mentioned in this video that check those 6 or 7 more sensor how to check them? Thanks for your sharing knowledge.
That sensor is the most common failure I have seen in the 18 and 20 ODU.... that one looked a little crooked sideways in the video when you showed where it is plugged together. It may have been fine but go back and pause the video at 6:35 if you're interested. It may have been a white tag, tape or something else tricking me but it seemed a bit sideways. Great video on the variable unit !!
$12K system $11 part. With that said, these units are great and have been mostly problem free”Knock on wood”! Just posted a short where the unit came out of the box with the suction sensor connected in the wrong spot. Have seen that a few times, just need to check it on start up.
My heat not coming on or condenser fan. My blower fan is working and believe blinking 5 time which is temp sensor. I have xl15i but can’t find on the net where it’s located. I’m going to try look for same place you did. Any clue? Also if it’s 6 green light then could be valve failure from heat:cool?
Thermistors are the weak link. The epoxied wire end seal is not real hermetic so prefer to mount wire side down and wrap with insulative tape for good thermal isolation from surrounding air flow and keep condensation off of thermistor.
Hey I see the knives smooth jaw pipe pliers Klein has a new pipe pliers that has flat jaws and flips for pipes it’s epic called the Klein 2 in 1 pipe pliers d530-10
You’re a true technician. Good job
I try, not always right. Thank you sir.
Honestly, you diagnose and explain very nicely. I will watch it once again surely. Could you make a full maintenance video on these kind of unit ?
And also you mentioned in this video that check those 6 or 7 more sensor how to check them? Thanks for your sharing knowledge.
Another great video. Thank you for the knowledge.
Thank you
Nice job troubleshooting
Great video. Thank you!
That sensor is the most common failure I have seen in the 18 and 20 ODU.... that one looked a little crooked sideways in the video when you showed where it is plugged together. It may have been fine but go back and pause the video at 6:35 if you're interested. It may have been a white tag, tape or something else tricking me but it seemed a bit sideways. Great video on the variable unit !!
$12K system $11 part. With that said, these units are great and have been mostly problem free”Knock on wood”! Just posted a short where the unit came out of the box with the suction sensor connected in the wrong spot. Have seen that a few times, just need to check it on start up.
Awesome video
😊nice job with that
Very informative video thanks 👍👍👍👀🇺🇸
Can you check those sensors with the system off or does it need to be running?
I was wondering when you were going to notice the wasp. I couldn't relax and listen to what you were saying until you chased it out!
Awesome music
My heat not coming on or condenser fan. My blower fan is working and believe blinking 5 time which is temp sensor.
I have xl15i but can’t find on the net where it’s located. I’m going to try look for same place you did. Any clue?
Also if it’s 6 green light then could be valve failure from heat:cool?
Thermistors are the weak link. The epoxied wire end seal is not real hermetic so prefer to mount wire side down and wrap with insulative tape for good thermal isolation from surrounding air flow and keep condensation off of thermistor.
Hey I see the knives smooth jaw pipe pliers Klein has a new pipe pliers that has flat jaws and flips for pipes it’s epic called the Klein 2 in 1 pipe pliers d530-10
What is the sensor part number?