Excellent video, only a little mistake, Cura have a default "Create Thumbnail" postprocessing script this one is not compatible with the preview of the firmware, the correct script name for generate the preview for the firmware is "Create JPEG Thumbnail". Thanks
So what are you saying? We don't need to do the steps shown here for creating the preview? Rather, in Cura use the Create JPEG Thumbnail post processing script?
hello Miguel I am happy to see you here I wanna ask you something today I did upgrade my firmware thanks to you :) and I used these code In cura ; Ender 3 Custom Start G-code G92 E0 ; Reset Extruder G28 ; Home all axes G29 ; G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line G92 E0 ; Reset Extruder G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish as you know I used G29 for every time make a bed mesh before printing and other codes are same default codes that makes cura automatically. but after that I don't know some how I can't get auto bed mesh before my print. can you help me with that issue should I change any code in here according to your firmware codes ? if you have can u share your cura codes please, btw I am using cr touch not the bltouch could it be about that ? with all that it is a good firmware upgrade you are my hero :)
The thumbnail for my printer works fine. To make that work, you should find the correct path of the python and then the correct path for the script and put both in between quotes. The latest firmware and the firmware for the screen interface are important as well. Thanks for the video, very helpful!
Great video, the firmware has been updated since with only the bltubl only version, so to enable bed leveling you need to add P1 after G29 when using Cura (machine setting script)
Great video very helpful as Im new to 3d printing. Shame the screen I have does not support the preview but all other options are great. Keep doing these useful vids.
Wow, excellent firmware design and those graphics are awesome - good job to the developer, this is going into my baby tomorrow! Maybe just some additional stuff - it would be a good hint to, if you have an aftermarket hotend like the micro-Swiss, to get the extruder steps/mm so when the firmware is installed, setup would be easier 🎉
Hi- will the Mriscoc firmware support the Creality CR Touch, rather than the BL Touch? If so, can you confirm which version to use for the CR Touch? Thanks, Keith
I got the same error on Prusa. I fixed it by installing the "pillow" library fro python. From the command prompt enter: pip install pillow. This dependency is mentioned right above the download link.
Hello, excellent video, but I have a question about how to activate the mesh, since when printing it continues to print incorrectly in some way, and I saw in another video of other software. I'm still down
I saw in other software similar to this where they activate it with a command in cura slicer, but I already printed and it seems that it was not activated, I did it with the one in the other video, but I don't know if you have information about that
i couldnt figure out how to do the display firmare i downloaded the files and my screen went blue and basicallyt said it could find any firmware i also tried to download different firmware types but it still doesnt work please help.
Is there no firmware for the TJC screen? All I saw was the TJC UPDATE folder(which I couldn't install because it kept telling me there were multiple versions on the SD card). I was successful with the motherboard firmware (4.2.7) but not the screen.
I have problems with the purge line and a wrong left offset axis x (purge out the bed), would you please help me to fix it?, mine is a Creality Ender 3 v2 Neo
I had the same issue and have the same printer. In Cura 5.2.1, go to Settings>Printer>Manage Printers>Machine Settings. On the "Start G-Code" on the left you will see a line that starts with "G1" and says "Move to start position." Change the X position to 15 for that line and the next 3. On the last line that says "Mover over to prevent blob squish" change the X position to 25. That should solve your problem. I also changed the Printer settings on the top left of that same screen. X (width) to 220, Y (depth) to 220, and Z (height) to 235 as these are more true to the printer's effective print area from what I have read.
it doesn't show me the gcode thumbnail on the Ender Screen.:( any advice? I do not print anything yet. It is necessary to install Python 3 as its says in the link wiki??
I got the firmware on Ender 3 V2 flashed and I used this firmware. Sadly, my gantry and hot end won't get down to the build plate. I have absolutely no idea how to fix this.
I have just put this firmware on my Creality 3 V2 Neo. The purge line is printing off the bed. When I did the mesh levelling that was trying to level off the bed. How do I re-centre it please.
physical settings are different for v2 neo. You can try: x min position : - 2 y min: 0 x max: 241 y max: 229 z max: 250 You should also set your speed lower for: max z speed: 6.0 max e speed: 25.0 These are set too high in firmware by default.
@@jeanarend3746 physical settings are different for v2 neo. You can try: x min position : - 2 y min: 0 x max: 241 y max: 229 z max: 250 You should also set your speed lower for: max z speed: 6.0 max e speed: 25.0 These are set too high in firmware by default.
My respects you make the best impressions with the Ender 3v2. This is one of the best firmware I've had for months, but for some reason after changing the extruder to metal it started to slide or click until it stuck. I've seen so many videos and I still can't find what it is. Can you please help me or share your slicer profile.
Thanks for the clear explanation. This is the best firmware for this printer, but it lacks the option to resume in the event of a power outage. Unfortunately, this feature does not exist, it was present in the previous firmware. Do you have an idea if it can be added?
This happened to me with my Ender 3 V2 Neo. In the instructions it appeared that I was supposed to have the Ender 3V2 DWIN display. After further inspection, I found out that me machine actually came with the Ender 3S1 DACAI display. I downloaded the display firmware in the folder called "Private" and it worked perfectly...black screen and them confirmation of the new firmware loaded. Note: when you download the folder named "Private", just copy and past it onto your SD card just as it is. Don't take anything out of the folder and leave the folder name as "Private".
Hi,I had a problem with my 4.22 board it burned up the hot bed connector so I replaced the motherboard with 4.27, Hot bed, and hot end. after that every time i started machine it beeped, so i thought i had to update the display. after going crazy for 2 weeks i came across this video which solved all my problems. but i have 1 question, Besides the bltouch i have i also wanted to activate the ARC welder option. Is this firmware already Activated for ARC? or do i have to do something else? thank you for your video. finally someone made sense. Bill Ct.
@@3DELWORLD can i private message you? I encounter some problem on my lcd display. I already follow all the step in your video yet it is not working. When i inserted the sd card it turn the lcd blue and red that indicates the lcd is done uploading. But it doesn't change. Btw i also follow your firmware same on your video. But i used the bltouch
@@brianjaylansigan2054 I just had the same issue. If you have an ender 3 V2 you very likely have a newer version with the DACAI display and will need to use the "private" folder rather than the "DWIN_SET" folder. It will look a little different when installing but it should work for you. You can see the difference in boards at 2:02 in the video. Good luck!
Thank for all the suggestions. I already solved my problem by reading the articles about the new display and i followed the format settings on my sd card and it works perfectly. Thank for the help btw☺️ God bless happy printing
@@Animalcanam I have CR touch on mine with this firmware and it works fine. CRTouch is basically as I understand it just Creality's version of bltouch and works the same.
Hello.Please help me with the choice of firmware on my printer, My motherboard version 4.2.2 is also equipped with filament sensor Touch sensors , which firmware should I choose specifically for my motherboard . My TFT display. How to flash the display to work with my motherboard. thank you in advance
parabens, ficou magnifico, agora tenho um problema, tenho o Sprite pro com Cr touch mas nao sei como fazer para por tudo a trabalhar como deveria, tenho actualmente como esta no seu video porque nao sei fazer, se poder ajudar seria uma maravilha.
I jus bought a 5 inch 3d touch pad for my ender 3v2, and ive been havin problems connecting. Do u know any firmware updates for the printer or touch screen? Thanke 😊
Good day Thank you very much for uploading this video. I have tried step by step to load the new firmware on the printer. After I put the SD card into the printer, the printer does not boot anymore. Even if I remove the SD card again, the freeze image with the "Creality" logo remains constantly when I start the printer. Can anyone help me? Many thanks and kind regards
I was able to install the firmware for the printer but I keep getting an error on the Screen firmware. I get a screen of text that basically tells me I have some kind of bit loader and it will not read the card on the screen. any Thoughts or Ideas?
Hello friend how are you? i like all your videos keep up the good work...i was wondering i have installed the firmware for the motherboard which turned out good but the display firmware it wouldn't show the same as yours..i was wondering if u can help me
Hello, Glad you liked our videos! For Display There are 2 files folder DWIN & DACAI , one for ender 3v2 and other for ender3 s1, have you downloaded right files??
hello again :) yes i have a dwin display ,,i scrolled down like u said and then clicked on "Go to Giadej compilation" with the 2 latest display like it shows then i clicked on this " Click to Download DWIN_SET (for DWIN screen units)" and did exactly what u did i even format my sd card a few times to juss incase..also it was showing this Giadej boot image and icons compilation with the new photos of the display..sorry again i hope somehow we can sort this out.thankyou again :)))
This is great firmware! Unfortunately, my Ender 3 V2 Neo has the newer DACAI display and is not able to display the Gcode imbedded thumbnails. I'm hoping this gets resolved at some point. Also, for some reason, my display's progress bar is stuck at zero, as is "remaining print time". Does anyone know a solution? I'm thinking this feature may have been deactivated in his build (perhaps due to memory limitations with the RCT6 chip this firmware is intended to support).
hello my friend, I do it with you step by step but now my problem is before start printing I select preheat pla it start to increase degree to 200 c everthing is ok but after I start printing degree goes to 175C than again wait for up to 200C is it motherboard problem or termistor problem or firmwarre problem I don't know my machine ender 3 v2 motherboard 4.2.2. thanks for video
Thank you so much for this tutorial. I have successfully installed the firmware. I was not successful with the Gcode preview though. I am using cure 5.2.1 if you can please make a video for the preview Gcode that would be great 😊 I have read the pinned comment and I tried that script as well but I am not getting the preview. 🙏
thanks so much and great video but am unable to install or update the lcd screen have you any advice on this i've also tried renaming the DWIN and private folders but still nothing updates the lcd screen thanks.........
This happened to me with my Ender 3 V2 Neo. In the instructions it appeared that I was supposed to have the Ender 3V2 DWIN display. After further inspection, I found out that me machine actually came with the Ender 3S1 DACAI display. I downloaded the display firmware in the folder called "Private" and it worked perfectly...black screen and them confirmation of the new firmware loaded. Note: when you download the folder named "Private", just copy and past it onto your SD card just as it is. Don't take anything out of the folder and leave the folder name as "Private".
If you have mriscoc firmware then you can download "display asset" files to update your screen. This step might help 01:52 Link for display asset: github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
Hello and thank you for your video. I have tried to follow your video to the letter but am still having a very hard time. I have an Ender 3 S1. I did all of the steps but the four icons will not show up. I get all of the numbers at the bottom but all I see is the Creality logo. I am desperate for help.
Hello, have you format SD card before installing screen driver? if not then format it and download right display assets for your screen and try it again.
@@3DELWORLD yes I did format the SD card. Would you be willing to write down on here what screen download that I need to do. It is very confusing for me. Do I leave it in the actual folder or just have the .bin on the SD card when I put it into the back plate of the screen.
Did I make a mistake? I followed this to a T but I don't have the "Advanced" menu. Where it should be, it only says "Leveling" and it does it on its own, it won't even let me adjust any settings. In other words I basically have the new look, but only the limited stock options. None of the advanced features this firmware has.
Maybe your display asset Installed correctly but firmware is not. try again. but first check motherboard & screen model. : github.com/mriscoc/Ender3V2S1
Downloaded the new firmware but I am getting a warning for malware when trying to download the "Display Assets". What is that all about? Do you need to have the new display assets for the firmware to work?
Hello sir, This firmware update video is only for Ender 3 v2 and ender 3 s1, You will find another great video about Voxelab Aquila. [ Hola señor, este video de actualización de firmware es solo para Ender 3 v2 y ender 3 s1. Encontrará otro gran video sobre Voxelab Aquila ]
Chrome is blocking the display dwin download from downgit via the github link. Is this a common problem with github files or just chrome being an overprotective browser?
IDK if this a too late of a reply but you have to temporarily disable the safe browsing feature. 3 dots upper right hand corner of browser --> Settings --> Privacy & Security --> Security --> Safe Browsing --> No protection. Just be sure to change it back afterwards if you want.
I searched for Ender 3 V2 Neo firmware upgrade and ended here but it does not say anything about the Neo, is the Ender V2/S1 firmware the same for the V2 Neo?
I got a problem my is the same but when I turn it on i just got the creality logo and nothing else come after this it's just stuck on this Maybe you can help me out 🙏🙏
Hello mate, I had the same problem. I fixed it by flashing the card again and then rename the firmware to "Filename123". Hopefully this will help you and tell me if it worked please!😅
What about firmware installation ? any errors ? if not then download right display asset: github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
Bonjour pouvez vous me mettre le lien pour changer icône j ai mis à jour imprimante mais j arrive pas à télécharger le lien pour mettre icône j ai un cr touch
😅, first installed the ender 3 v2 official firmware from creality. make sure your printer is running smoothly. after that installed this firmware step by step.
Great video! But I have a question. I'm unable to execute the LIN_ADVANCE feature on my stock ender 3 V2 firmware. Does this firmware version has acces to it through pronterface?
So I updated the main firmware to professional firmware with the BL touch compatibility.... And I followed, to the letter, how to update the screen assets.... But my screen just flashes almost immediately red and then beeps.... Then the assets do not change. Does anybody have an idea of what I'm doing wrong?
Hello Dear Friend ! I have to ask you. if you can help me solve the problem that arose after replacing the motherboard on my 3d printer, in particular, the problem is: my old motherboard stopped working, it went bad and I bought a new Creality 4.2.2. this device has a processor with the number (in this order it is written): GD32F303 RET6 AUJO484 AZ2219 GIGADEVICE ARM I connected very correctly and carefully all the wires and turned it on after connecting. I checked and made test movements of the carriage and hot end, everything works well in this case, Z works well too, auto return home also works well, the mechanics are good. but as soon as I want to print something >>> only X and Y axis work well, Z does not work , does not rise up during printing, although the filament arrives and is printed on one layer, I do not understand and do not know how to fix this problem, the warranty period has passed because I have not been at home for a long time and the seller does not return it back.If you can help, or suggest where to look for a way out of this difficult situation, please help, I'm not strong in computers and programming so that I can flash "it" myself, that's why I turned to you with this request! I look forward to good news from you. BEST REGARDS, GEORGE!
Hello Dear friend, 1) Check when you control your Z axis whether it moves accurately or not(up and down via screen)? 2) Check the Z axis connector that is connected to the motherboard, make sure it is not loose or break! 3) If that JST connector is broken then change the connector. 4) Have you changed any settings or commands in slicer?If yes then backup your profile and reinstalled slicer or else try another slicer. 5) Check the Z axis sensor. may sensor get damaged after long run use. 6) If still has an issue then install default Creality firmware from their official website and try again. Try it and let me know. BEST REGARDS, Siddhesh
Im doing everything step by step but my screen doesnt show anything at all. Did the screen update 1st got the orange screen on. Did the mobo upgrade and nothing plz help.
👋 Hello, did you manage to resolve this issue? Initially I followed two tutorials to install the Mriscoc firmware, this one and BV3D, but I encountered the same issue as you. The screen dimmed in brightness but remained blank. Failing to display the boot up "CREALITY LOGO". BV3d: ua-cam.com/video/pxBGBjLC2rk/v-deo.html SOLUTION: To fix this problem I checked the mriscoc wiki and found a small but critical instruction at #3. In the uSD Card root, rename the file. I made mine "MRIS1.bin" and reloaded the card into the printer. This resolved the issue but erased the _new mriscoc_ screen firmware which I had successfully updated during my first attempt. Keep a record of whatever names you use for loaded firmware, if you ever intend to change it, the names CANNOT match. *Manual installation for Ender3 V2 and S1 with STM32F1 SoC* 1) Insert a blank and MBR, FAT32 and 4096 allocation unit formatted µSD in your PC/Mac 2) Copy the .bin file to the root of the card *3) Ensure that the name of the file was not previously used to update the printer.* *!! If necessary, rename the file !!* 4) Turn off the printer, disconnect any USB cable and insert the µSD card. 5) Turn on the printer, the upgrade firmware process will start automatically. 6) The display will be blank until the upgrade is finished (about 15 seconds). 7) If you are upgrading from the original firmware or other fork, please restore defaults. 8) Make the MPC/PID adjust and put the other calibration parameters github.com/mriscoc/Ender3V2S1/wiki/How-to-install-the-firmware
Excellent video, only a little mistake, Cura have a default "Create Thumbnail" postprocessing script this one is not compatible with the preview of the firmware, the correct script name for generate the preview for the firmware is "Create JPEG Thumbnail". Thanks
Glad you liked the video Miguel. I realized my mistake and your comment will be very helpful for our 3D printing family.
how to skr mini e3 v3?? thanks
So what are you saying? We don't need to do the steps shown here for creating the preview? Rather, in Cura use the Create JPEG Thumbnail post processing script?
@@broderp no, you need to install and select the correct post-processing script.
hello Miguel I am happy to see you here I wanna ask you something today I did upgrade my firmware thanks to you :) and I used these code In cura
; Ender 3 Custom Start G-code
G92 E0 ; Reset Extruder
G28 ; Home all axes
G29 ;
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
as you know I used G29 for every time make a bed mesh before printing and other codes are same default codes that makes cura automatically. but after that I don't know some how I can't get auto bed mesh before my print. can you help me with that issue should I change any code in here according to your firmware codes ? if you have can u share your cura codes please, btw I am using cr touch not the bltouch could it be about that ? with all that it is a good firmware upgrade you are my hero :)
The thumbnail for my printer works fine. To make that work, you should find the correct path of the python and then the correct path for the script and put both in between quotes. The latest firmware and the firmware for the screen interface are important as well. Thanks for the video, very helpful!
Great video, the firmware has been updated since with only the bltubl only version, so to enable bed leveling you need to add P1 after G29 when using Cura (machine setting script)
Thanks for sharing
Great video very helpful as Im new to 3d printing. Shame the screen I have does not support the preview but all other options are great. Keep doing these useful vids.
Glad it helped ❤
Thank you a lot. Straight to the point
Very nice
Glad it helped sir, stay tuned👍
Wow, excellent firmware design and those graphics are awesome - good job to the developer, this is going into my baby tomorrow!
Maybe just some additional stuff - it would be a good hint to, if you have an aftermarket hotend like the micro-Swiss, to get the extruder steps/mm so when the firmware is installed, setup would be easier 🎉
Thanks a lot for the explanation you did great 👍
Glad you liked it 😊👍
its very useful info for me, I don't know about display asset before watched yr tutorial. thanks for great sharing.!!
Glad it helped you mate😊
Great share, thanks. I will be back with an Update this week when I have installed BLTouch on the V2.
Sounds good!
excellent, i like this video, thanks broo!!!
Glad you liked it bro 😊
Awesome!
Great video man, thank you !!! Can I use this Firmware with my Ender 3 V2 Neo ?
Glad it helped 😊👍 for Ender 3 V2 Neo check the creators page
Hi- will the Mriscoc firmware support the Creality CR Touch, rather than the BL Touch? If so, can you confirm which version to use for the CR Touch? Thanks,
Keith
Thanks!
Glad it helped!
I got the same error on Prusa. I fixed it by installing the "pillow" library fro python. From the command prompt enter: pip install pillow. This dependency is mentioned right above the download link.
Onde baixa esse programa?
Eu consegui fazer funcionar no prusa, tem que seguir alguns passos mas deu certo.
video super informativo, grazie mille mi hai aiutato tantissimo :)
Sono contento che abbia aiutato signore! (Glad It Helped Sir!)
Hello, excellent video, but I have a question about how to activate the mesh, since when printing it continues to print incorrectly in some way, and I saw in another video of other software. I'm still down
I saw in other software similar to this where they activate it with a command in cura slicer, but I already printed and it seems that it was not activated, I did it with the one in the other video, but I don't know if you have information about that
Thank you very much if you or someone from the community answers my question.
i couldnt figure out how to do the display firmare i downloaded the files and my screen went blue and basicallyt said it could find any firmware i also tried to download different firmware types but it still doesnt work please help.
Is there no firmware for the TJC screen? All I saw was the TJC UPDATE folder(which I couldn't install because it kept telling me there were multiple versions on the SD card). I was successful with the motherboard firmware (4.2.7) but not the screen.
I have problems with the purge line and a wrong left offset axis x (purge out the bed), would you please help me to fix it?, mine is a Creality Ender 3 v2 Neo
I had the same issue and have the same printer. In Cura 5.2.1, go to Settings>Printer>Manage Printers>Machine Settings. On the "Start G-Code" on the left you will see a line that starts with "G1" and says "Move to start position." Change the X position to 15 for that line and the next 3. On the last line that says "Mover over to prevent blob squish" change the X position to 25. That should solve your problem. I also changed the Printer settings on the top left of that same screen. X (width) to 220, Y (depth) to 220, and Z (height) to 235 as these are more true to the printer's effective print area from what I have read.
it doesn't show me the gcode thumbnail on the Ender Screen.:( any advice?
I do not print anything yet. It is necessary to install Python 3 as its says in the link wiki??
Bro I am very grateful God bless u. This actualization helps to print in 2 or more colors??
Glad it helped, It should print in 2 over more colors by using change filament option.
How is the interface with octoprint?
I got the firmware on Ender 3 V2 flashed and I used this firmware. Sadly, my gantry and hot end won't get down to the build plate. I have absolutely no idea how to fix this.
Thanks for making a great video. Is there firmware that includes the BL touch? Thanks
Yes it does!
Awesome, thank you ! Does it work for models with GD32 chips or only STM32 ?
Glad it helped ❤, If you have any issue you can find it in "Issues Tab" or "Discussions tab" might help. have nice day sir ❤
I have just put this firmware on my Creality 3 V2 Neo. The purge line is printing off the bed. When I did the mesh levelling that was trying to level off the bed. How do I re-centre it please.
I have the same issue! In the v2 neo.
physical settings are different for v2 neo. You can try:
x min position : - 2
y min: 0
x max: 241
y max: 229
z max: 250
You should also set your speed lower for:
max z speed: 6.0
max e speed: 25.0
These are set too high in firmware by default.
@@jeanarend3746 physical settings are different for v2 neo. You can try:
x min position : - 2
y min: 0
x max: 241
y max: 229
z max: 250
You should also set your speed lower for:
max z speed: 6.0
max e speed: 25.0
These are set too high in firmware by default.
Great, I have installed on my ender 3v2, but how do I get z axis nearer to bed ?
My respects you make the best impressions with the Ender 3v2. This is one of the best firmware I've had for months, but for some reason after changing the extruder to metal it started to slide or click until it stuck. I've seen so many videos and I still can't find what it is. Can you please help me or share your slicer profile.
Thanks for the clear explanation.
This is the best firmware for this printer, but it lacks the option to resume in the event of a power outage.
Unfortunately, this feature does not exist, it was present in the previous firmware.
Do you have an idea if it can be added?
the pause function in the firmware is not working
Glad it helped ❤, If you have any issue you can find it in "Issues Tab" or "Discussions tab" might help. have nice day sir ❤
when I try to download the software for the display to the printer it boots up like normal and I never get this black blue and red screen? any idea?
This happened to me with my Ender 3 V2 Neo. In the instructions it appeared that I was supposed to have the Ender 3V2 DWIN display. After further inspection, I found out that me machine actually came with the Ender 3S1 DACAI display. I downloaded the display firmware in the folder called "Private" and it worked perfectly...black screen and them confirmation of the new firmware loaded. Note: when you download the folder named "Private", just copy and past it onto your SD card just as it is. Don't take anything out of the folder and leave the folder name as "Private".
@@TCYeats THAT IS THE ANSWER FOR MANY MANY COMMENTS!! I had the same problem and you save me. Lots of people are in this step. Thank you man
Hello, excellent video. How I use auto leveling, I put G29 but it doesn't do automatic leveling before printing. Grateful
same on me dude can you solve it ?
Hi,I had a problem with my 4.22 board it burned up the hot bed connector so I replaced the motherboard with 4.27, Hot bed, and hot end. after that every time i started machine it beeped, so i thought i had to update the display. after going crazy for 2 weeks i came across this video which solved all my problems. but i have 1 question, Besides the bltouch i have i also wanted to activate the ARC welder option. Is this firmware already Activated for ARC? or do i have to do something else? thank you for your video. finally someone made sense.
Bill Ct.
Help please, how can i run meshbedleveling before start print. G29 not working. Please help.
Nice video❤❤ but i have a question. Is it possible to update the lcd display without changing the old firmware?
I haven't tried that!
@@3DELWORLD can i private message you? I encounter some problem on my lcd display. I already follow all the step in your video yet it is not working. When i inserted the sd card it turn the lcd blue and red that indicates the lcd is done uploading. But it doesn't change. Btw i also follow your firmware same on your video. But i used the bltouch
@@brianjaylansigan2054 I just had the same issue. If you have an ender 3 V2 you very likely have a newer version with the DACAI display and will need to use the "private" folder rather than the "DWIN_SET" folder. It will look a little different when installing but it should work for you. You can see the difference in boards at 2:02 in the video. Good luck!
Thank for all the suggestions. I already solved my problem by reading the articles about the new display and i followed the format settings on my sd card and it works perfectly. Thank for the help btw☺️ God bless happy printing
i only saw bl touch options whitch is best for v2 with cr touch ?
I have same question
@@Animalcanam I have CR touch on mine with this firmware and it works fine. CRTouch is basically as I understand it just Creality's version of bltouch and works the same.
@@lawrencehawkins381 Yes and it is Made with Metal
What happens if you don't update the display? Will it be the same as shown in this vide- only with the stock icons?
Exactly!
my screen says thumbnail not found. ??
The best HowTo ... Good job:-)
No filament sensor?
Hello.Please help me with the choice of firmware on my printer, My motherboard version 4.2.2 is also equipped with filament sensor Touch sensors , which firmware should I choose specifically for my motherboard . My TFT display. How to flash the display to work with my motherboard. thank you in advance
Did you ever get a resolution
Thanks for the video , I've installed the last release but don't have the PID nozzle menu , do you think it's normal?
Glad it helped ❤, I think it's normal but, If you want to let you know about PID nozzle menu you can ask in "Discussions tab" might help.
parabens, ficou magnifico, agora tenho um problema, tenho o Sprite pro com Cr touch mas nao sei como fazer para por tudo a trabalhar como deveria, tenho actualmente como esta no seu video porque nao sei fazer, se poder ajudar seria uma maravilha.
Hello Mate, I have not yet installed CR touch in my ender 3v2. This discussion tab might help you: github.com/mriscoc/Ender3V2S1/discussions/235
We need firmware for the TJC board. The gen 4 screens will not accept any of these.
I jus bought a 5 inch 3d touch pad for my ender 3v2, and ive been havin problems connecting. Do u know any firmware updates for the printer or touch screen? Thanke 😊
I have not tried this firmware on the 3d touch pad 😅
This discussion tab might help you github.com/mriscoc/Ender3V2S1/discussions
Good day
Thank you very much for uploading this video. I have tried step by step to load the new firmware on the printer. After I put the SD card into the printer, the printer does not boot anymore. Even if I remove the SD card again, the freeze image with the "Creality" logo remains constantly when I start the printer. Can anyone help me?
Many thanks and kind regards
I was able to install the firmware for the printer but I keep getting an error on the Screen firmware. I get a screen of text that basically tells me I have some kind of bit loader and it will not read the card on the screen. any Thoughts or Ideas?
Hello friend how are you? i like all your videos keep up the good work...i was wondering i have installed the firmware for the motherboard which turned out good but the display firmware it wouldn't show the same as yours..i was wondering if u can help me
Hello, Glad you liked our videos! For Display There are 2 files folder DWIN & DACAI , one for ender 3v2 and other for ender3 s1, have you downloaded right files??
hello again :) yes i have a dwin display ,,i scrolled down like u said and then clicked on
"Go to Giadej compilation" with the 2 latest display like it shows then i clicked on this " Click to Download DWIN_SET (for DWIN screen units)" and did exactly what u did i even format my sd card a few times to juss incase..also it was showing this Giadej boot image and icons compilation with the new photos of the display..sorry again i hope somehow we can sort this out.thankyou again :)))
This is great firmware! Unfortunately, my Ender 3 V2 Neo has the newer DACAI display and is not able to display the Gcode imbedded thumbnails. I'm hoping this gets resolved at some point. Also, for some reason, my display's progress bar is stuck at zero, as is "remaining print time". Does anyone know a solution? I'm thinking this feature may have been deactivated in his build (perhaps due to memory limitations with the RCT6 chip this firmware is intended to support).
hello my friend, I do it with you step by step but now my problem is before start printing I select preheat pla it start to increase degree to 200 c everthing is ok but after I start printing degree goes to 175C than again wait for up to 200C is it motherboard problem or termistor problem or firmwarre problem I don't know my machine ender 3 v2 motherboard 4.2.2. thanks for video
How about Precision, better mriscoc or original firmware?
Mriscoc is a professional firmware with good features. But Choice is yours 😊
@@3DELWORLD i know, a week ago im trying. 👍
What is rabbit? 😐 In the ender 3v2 screen
Thank you so much for this tutorial. I have successfully installed the firmware. I was not successful with the Gcode preview though. I am using cure 5.2.1 if you can please make a video for the preview Gcode that would be great 😊 I have read the pinned comment and I tried that script as well but I am not getting the preview. 🙏
Glad it helped! and yes I am working on it👍
thanks so much and great video but am unable to install or update the lcd screen have you any advice on this i've also tried renaming the DWIN and private folders but still nothing updates the lcd screen thanks.........
Glad it helped ❤, If you have any issue you can find it in "Issues Tab" or "Discussions tab" might help. have nice day sir ❤
This happened to me with my Ender 3 V2 Neo. In the instructions it appeared that I was supposed to have the Ender 3V2 DWIN display. After further inspection, I found out that me machine actually came with the Ender 3S1 DACAI display. I downloaded the display firmware in the folder called "Private" and it worked perfectly...black screen and them confirmation of the new firmware loaded. Note: when you download the folder named "Private", just copy and past it onto your SD card just as it is. Don't take anything out of the folder and leave the folder name as "Private".
I have professional firmware but my screen is not like that. Is there two firwares that are both called professional firmware?
If you have mriscoc firmware then you can download "display asset" files to update your screen.
This step might help 01:52
Link for display asset: github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
Will this firmware work if I have the CR Touch and a Sprite Extruder Pro?
I am not sure about that but you can check the "Discussions" tab
github.com/mriscoc/Ender3V2S1/discussions
Is there a firmware avaible for Ender 3 S1 Pro?
Hello and thank you for your video. I have tried to follow your video to the letter but am still having a very hard time. I have an Ender 3 S1. I did all of the steps but the four icons will not show up. I get all of the numbers at the bottom but all I see is the Creality logo. I am desperate for help.
Hello, have you format SD card before installing screen driver?
if not then format it and download right display assets for your screen and try it again.
@@3DELWORLD yes I did format the SD card. Would you be willing to write down on here what screen download that I need to do. It is very confusing for me. Do I leave it in the actual folder or just have the .bin on the SD card when I put it into the back plate of the screen.
Did I make a mistake? I followed this to a T but I don't have the "Advanced" menu. Where it should be, it only says "Leveling" and it does it on its own, it won't even let me adjust any settings. In other words I basically have the new look, but only the limited stock options. None of the advanced features this firmware has.
Maybe your display asset Installed correctly but firmware is not. try again. but first check motherboard & screen model. : github.com/mriscoc/Ender3V2S1
Downloaded the new firmware but I am getting a warning for malware when trying to download the "Display Assets". What is that all about? Do you need to have the new display assets for the firmware to work?
It doesn't have any virus you can download it.
Buenas, hay alguna posibilidad de dejarla como de fabrica porque voy a venderla, Gracias
Download firmware from Creality official website and install it to your printer 👍🏻
the seconde link for the screen is a virus ?
Will the continue option show when the current goes off?
Yess
Hola. Que firmware debería descargar para Voxelab Aquila??Con Manual mesh y chip RTC6. Gracias. Un saludo.
Hello sir, This firmware update video is only for Ender 3 v2 and ender 3 s1, You will find another great video about Voxelab Aquila.
[ Hola señor, este video de actualización de firmware es solo para Ender 3 v2 y ender 3 s1. Encontrará otro gran video sobre Voxelab Aquila ]
Chrome is blocking the display dwin download from downgit via the github link. Is this a common problem with github files or just chrome being an overprotective browser?
IDK if this a too late of a reply but you have to temporarily disable the safe browsing feature. 3 dots upper right hand corner of browser --> Settings --> Privacy & Security --> Security --> Safe Browsing --> No protection. Just be sure to change it back afterwards if you want.
I searched for Ender 3 V2 Neo firmware upgrade and ended here but it does not say anything about the Neo, is the Ender V2/S1 firmware the same for the V2 Neo?
You have to check your board first mate.
This discussions link might help you with that: github.com/mriscoc/Ender3V2S1/discussions/413
screen went from blue to red but my screen never updated to new look
Hello. Tell me how to change the display interface language in Marlin? I need Russian
I got a problem my is the same but when I turn it on i just got the creality logo and nothing else come after this it's just stuck on this
Maybe you can help me out 🙏🙏
Hello mate, I had the same problem. I fixed it by flashing the card again and then rename the firmware to "Filename123". Hopefully this will help you and tell me if it worked please!😅
how to skr mini e3 v3?? thanks
Hi I can not install the display it turn directly (orange red and no display install) can you help me?
What about firmware installation ? any errors ?
if not then download right display asset: github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
@@3DELWORLD no error with install of firmware. I have donwload the Dwin but it directly goes red/ orange nothing update.... I have the first card
Excellent video. I would like to know if this firmware has file recovery after power failure.
Yes it does
Bonjour pouvez vous me mettre le lien pour changer icône j ai mis à jour imprimante mais j arrive pas à télécharger le lien pour mettre icône j ai un cr touch
github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
Scroll down> Select your printer> Click to download
This step might help 01:52
sir i have a problem if i update wrong firmware then how to update right firmware
😅, first installed the ender 3 v2 official firmware from creality. make sure your printer is running smoothly. after that installed this firmware step by step.
Will this work with the Creality touch screen?
Hello, It only works with Ender 3 v2 and Ender 3 s1!
It will not. "Touch or legacy monochrome screens are not supported.
You can modify your printer to meet these requirements."
👌👍
Bonjour ce firmware propose t il l'a langue française ? Merci
Maybe not, check on firmware page
Does this work with the Ender 3V2 Neo with the GD32F303 SoC??
I have doubt. This discussion tab might help you. github.com/mriscoc/Ender3V2S1/discussions/235
@@3DELWORLD I risked it, but it does work no problems, very glad I updated to tis firmware
@@yogicota51 is it work properly without any error ?
hola, hay alguna manera de poner la pantalla en español?
I am not sure about that
This firmware have pause m600 funcion ?
yes
Great video! But I have a question. I'm unable to execute the LIN_ADVANCE feature on my stock ender 3 V2 firmware. Does this firmware version has acces to it through pronterface?
Yes it will
I am not able to download display file
This step might help 01:52
Link for display asset: github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
So I updated the main firmware to professional firmware with the BL touch compatibility.... And I followed, to the letter, how to update the screen assets....
But my screen just flashes almost immediately red and then beeps.... Then the assets do not change.
Does anybody have an idea of what I'm doing wrong?
Same for me, did you find a solution? Please let me know in case you did
I have a similar problem, except mine does nothing but load normally.
Does anyone know if this firmware will work with the new Ender 3 Max Neo?
This firmware is only for ender 3 v2 and ender 3 s1
It worked with my ender 3 max with a ender 3 v2 display
Este software tem a linguagem portugues?
I am not sure about that
display firmware is empty bro
Are you sure ?? github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
did I miss e-steps?
probably 😅
Do you know if the firmware is good for Ender 3 S1 plus ?
This firmware is only for ender 3 v2 and ender 3 s1
downloding problem
Ender 3 s1 e uyumlumu
Yes, Download right precompiled file
This is all nonsense because their download page doesn't look anything like that and there is no way to tell which version to get!
Hello Dear Friend !
I have to ask you. if you can help me solve the problem that arose after replacing the motherboard on my 3d printer, in particular, the problem is: my old motherboard stopped working, it went bad and I bought a new Creality 4.2.2. this device has a processor with the number (in this order it is written):
GD32F303
RET6
AUJO484
AZ2219
GIGADEVICE
ARM
I connected very correctly and carefully all the wires and turned it on after connecting. I checked and made test movements of the carriage and hot end, everything works well in this case, Z works well too, auto return home also works well, the mechanics are good. but as soon as I want to print something >>> only X and Y axis work well, Z does not work , does not rise up during printing, although the filament arrives and is printed on one layer, I do not understand and do not know how to fix this problem, the warranty period has passed because I have not been at home for a long time and the seller does not return it back.If you can help, or suggest where to look for a way out of this difficult situation, please help, I'm not strong in computers and programming so that I can flash "it" myself, that's why I turned to you with this request! I look forward to good news from you.
BEST REGARDS,
GEORGE!
Hello Dear friend,
1) Check when you control your Z axis whether it moves accurately or not(up and down via screen)?
2) Check the Z axis connector that is connected to the motherboard, make sure it is not loose or break!
3) If that JST connector is broken then change the connector.
4) Have you changed any settings or commands in slicer?If yes then backup your profile and reinstalled slicer or else try another slicer.
5) Check the Z axis sensor. may sensor get damaged after long run use.
6) If still has an issue then install default Creality firmware from their official website and try again.
Try it and let me know.
BEST REGARDS,
Siddhesh
@@3DELWORLD ooo,thank you very much!!! i try all instruction from you,thank you!!!!!!!
Thanks!
Im doing everything step by step but my screen doesnt show anything at all. Did the screen update 1st got the orange screen on. Did the mobo upgrade and nothing plz help.
check your screen assets and download right one: github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
👋 Hello, did you manage to resolve this issue?
Initially I followed two tutorials to install the Mriscoc firmware, this one and BV3D, but I encountered the same issue as you. The screen dimmed in brightness but remained blank. Failing to display the boot up "CREALITY LOGO".
BV3d:
ua-cam.com/video/pxBGBjLC2rk/v-deo.html
SOLUTION:
To fix this problem I checked the mriscoc wiki and found a small but critical instruction at #3.
In the uSD Card root, rename the file. I made mine "MRIS1.bin" and reloaded the card into the printer. This resolved the issue but erased the _new mriscoc_ screen firmware which I had successfully updated during my first attempt.
Keep a record of whatever names you use for loaded firmware, if you ever intend to change it, the names CANNOT match.
*Manual installation for Ender3 V2 and S1 with STM32F1 SoC*
1) Insert a blank and MBR, FAT32 and 4096 allocation unit formatted µSD in your PC/Mac
2) Copy the .bin file to the root of the card
*3) Ensure that the name of the file was not previously used to update the printer.*
*!! If necessary, rename the file !!*
4) Turn off the printer, disconnect any USB cable and insert the µSD card.
5) Turn on the printer, the upgrade firmware process will start automatically.
6) The display will be blank until the upgrade is finished (about 15 seconds).
7) If you are upgrading from the original firmware or other fork, please restore defaults.
8) Make the MPC/PID adjust and put the other calibration parameters
github.com/mriscoc/Ender3V2S1/wiki/How-to-install-the-firmware