The Easiest Way to Customize Miguel's Professional Firmware
Вставка
- Опубліковано 10 вер 2024
- In this video, I'll walk you through using Miguel's configurator tool to create your own custom version of this Professional Firmware that can be used on any printer running 4.2.2, 4.2.3, 4.2.7, SKR Mini E3 V3, G32, and 2 others.
Video Support Files - drive.google.c...
Firmware flash video - • Ender 3 V2 Assembly, U...
Micro Swiss NG - store.micro-sw...
Garolite G10 Build Surface fits Ender 3/Pro, Ender 3 V2, Ender 3 S1/ Pro, CR-20, Ender 5/Pro, Ender 3 Neo, Ender-3 V2 Neo, Voxelab Aquila, and others with a (235 X 235mm) Bed - amzn.to/3tNSGg8
Garolite G10 Build Surface fits Creality CR-10S Pro, CR-10S Pro V2 and V3, Ender 3 Max, Ender 3 Max Neo, and Others with (310 X 320mm) Bed - amzn.to/3FZy2iH
Other related videos:
Maximizing your probe's reach - • Ender 3 Pro V2 Creatin...
CURA centering video - • Creality Ender 3 V2 Mi...
Song: Jim Yosef x ROY KNOX - Sun Goes Down [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/SunGoesDown
Watch: • Jim Yosef x ROY KNOX -...
Again thank you for this this allowed me to use the BTT SKR mini E3 V3 board. I used the input shaping and it's printing better than I could have imagined. I also used a 4" wave share TFT display on a raspberry pi 2W that opens chromium to Mainsail and it isn't as fast as a phone but works well to fill the void. It went in pretty tight to the bottom but I fixed that by putting frame stabilizer brackets under the bottom cover which provided 4-5mm of extra space i just used a piece of foam to seal the bottom in front. If and when this fails, I will go with the Manta 5 with CB1.
Hi Patty, Great job getting it all working, board swapping can be a little intimidating at first. Thank you for the info on the TFT display. Did you get it working with Miguel's Professional Firmware or Klipper?
Using klipper and mainsail per your instructions and I love it. Printing ABS or PC I can slam it into the bed and after the first layer raise it up to a correct height for silky smooth printing. The only issue I have is the TFT specifically Chomium has error reports and several open tabs to mainsail exhausting resources. I have to work through this but everything else is absolutely fabulous.
Hi Mark, Thank you for commenting and encouragement. I'm glad you found value in the video for your viewing time. Super cool to hear you'r working with ABS and PC. What print surface are you using for them and do you have an enclosure for your printer?
Unfortunately, I don't have any experience with the TFT display. I'm running Mainsail Klipper on my machines without displays. If I need to be next to printer for some reason I just use my smart phone or tablet to control the printer through the Mainsail web interface.
Please let me know when you find the solution to the TFT display issue.
Display running great. I have a picture of it printingcABS.
@@user-on2je4vc9b I would love to see it vbared@gmail.com
Its working now. I modified the python installation and checked everything. Thanks for sharing.
Excellent! I'm glad you persisted in getting it to work for you.
Sir, it looks like the printer is running great. i purchased the Garolite board you suggested but i didn't put it on right away as i have read that material has flatness issues. i had been running a glass bed and that had minor issue with being flat and dimensionally long and wide prints would end up having one edge come up during printing that would mess the whole thing up. as i was sitting there frustrated with a recent print, i looked at the top shelf and there was the Garolite bed. I figured, why not give it a try? i removed the rear stock clips.modified them a bit and reused them (and shorted something on the bottom of the bed while i was at it, luckily there wasn't any damage) i leveled the bed and did a mesh and somehow.......it was flatter than glass? what? really? how? then i started to print the bane of my existence, the frame for my retro chip tester. there was a little blob of filament and normally i can just flick it off real quick, um..nope, this was stuck on there really good. couldn't budge it and i certainly wasn't going to end up scratching the bed trying to take it off. so i left it and let the print run. when i returned from work tonight it was finished and fully cooled and i just gently lifted it off the bed, no muss no fuss. you were right this is a game changer, not a single flaw on that print. i have been trying to print this off and on for months with zero success. thank you again for all your help and all the content of your videos.
Hi Duane, Thank you for your kindness. I'm glad the custom G10 met your expectations. The product reviews that knock it's flatness don't realize that because of its thickness it conforms to the surface beneath it. Creality aluminum beds are stamped out from large sheets of aluminum so they vary in flatness. My worst aluminum bed is shaped like a Pringles Potato chip in the mesh viewer but that's where the magic from the probed bed comes in to save the day. I totally print with confidence on G10, just start the print and I know it won't have adhesion issues. Enjoy the new print possibilities.
Have a wonderful day :)
thanks for the explanations
Anytime friend, I'm glad you found value in this video for your viewing time. Best of luck with your build.
I'm having a problem with the build marlin part. I have all the setting with no errors but when I select build marlin in the auto build marlin extension it says done, but the PIO tab does not show up. I'm using an ender 3 v2 with a v4.22 with a spider v3 hotend I'm not sure what the thermistor is, so I just use the default.
Hi Deonn, Thank you for commenting. Check the PIO directory using the Windows file explorer instead. If the build Marlin completed without errors your .bin file should be there.
Thank for the video, sorry i' late to the party. I've tried 8 different time to compile the software. I keep get an error failed when opening the fold to make changes. I have a CR10S Pro V2, I'm going to install a SKR mini 3 V3. and a THT35-3 V3 (both on order) and thought I could use your guide to have the firmware ready when I get the board and screen installed. I have the error messaage copied to Notepad but not sure if I should copy and paste it in a messaage board. I changed the CPU in the My configuration to the BTT board instead of the 4.2.7 the rest I loaded exactly as in you video? Could you give me any pointer? I have no coding experience, but can follow directions
Thanks
Update 1: after reading forums it may be my board is not listed or not being uploaded somewhere, but i have no idea how to correct it.
Update 2: I found what the poster said was a woking Professional Firmware file for an Ender 3 S1 + SKR mini E3 V3, I should really only need to change the x,y and z paramters and temp setting to match my CR10s Pro V2, correct?
I realize this is from a while back. Running into a problem here. @16:00 you are running the Marlin Auto Build and you have tabs at the top showing it. I don't have that? You didn't mention how to set this all up.
Hi Krakenunbound, If I remember correctly you need to have the Auto Build Marlin extension installed in visual studio along with Platform IO. Check yours by opening Visual Studio and clicking on the cog icon (labeled Manage when hovering over with mouse) on the far left bottom. Click on it then select Extensions. The installed extension will populate on the left side. If the Auto Build Marlin and Platform IO aren't there then search for them in the marketplace using the search box above the currently installed extensions. linked below are the specific instructions on where in your project folder to put the files from the configurator tool. Also below are the versions of Visual Studio and Python that I use and currently work to open the Configurator.pyw file.
github.com/mriscoc/Special_Configurations
Visual Studio 1.84.2
Python 3.9
Thank you for asking this question! Had same issue
I have ender 3 with GB v4.2.2R gb board 32bit of creatilty , which board should I select in this configuration
Hello Darshan, Thank you for commenting. Choose STM32F103RC_creality (256K) which is the second choice.
Hi mate. Tried following your directions to the letter, but it wont open the configerator file . Something flashes up for a split second but that's it. Any help would be most appreciated
Hello user-kp1tg4uo5l, Sorry to hear about the trouble you're having. A few others have are reporting the same thing. Since I haven't experienced the issue I can only guess as to the cause. Do you have Python installed? if so is it properly associated with the configurator file extension? Check to see if another program is killing it on startup like an antivirus. Should you be unsuccessful with the aforementioned you could send me the selections you need and I would be happy to compile it for you.
Enjoy your day :)
@@vbared I'm having the same issue. No matter what I try or Google, it's not working. Were you using Windows 11 or Windows 10? All I want to do is make a version of the existing Ender3V2-422-MM-LA-MPC but without the MPC (I want to try going back to PID tuning to see if it resolves an issue I'm having). LA has been great, but I think MPC is messing up my walls.
@@Hermitmaster Hi Hermitmaster, I recently ran into the same thing after updating Python. Uninstall the version you have and install the older Python 3.9.7
This fixed the problem for me.
@@vbaredThanks very much, that fixed it!
had the same problem, fix that worked for me. uninstalled the current python, and reinstalled from the windows store. change settings in the environment to add .py and .pyw and lastly open the file with pythonw.exe which should be in the installation directory. Hopw it works for you guys as well.
Where am I wrong? "unexpected character after line continuation character message" when i tried to run configurator.pyw file. I also noticed the file does not open automatically with python, i have to run python and drag the file which gives me the error
Hello Me Notu, Thank you for commenting. I'm not sure why that error message is popping up for you. Mine associated .pyw file with Python. If you want send me the choices you need based on the screen shot and I'll zip the config files and link them here.
@@vbared Hi, unfortunately I have the same problem. I own an Ender 3 Max Neo with autoleveling. Board 4.2.2. Please select all features. It would be really great if you could create such a config for me.
@@Melchy1971 Hello Melchy1971, Thank you for commenting. I'd love to help but need to know what display screen control board your machine is using. Please open up the display, take a picture of the info on the board, and link it here.
Hey, unfortunately I have the same problem. I have a ender 3 v2. 4.2.7. Dwin for screen. Manual mesh. Not using BLT touch. T13 thermistor. And select all features that you chose. I don't know what the last feature np is. But I should be good with everything else .
Auto Build Marlin is part of Visual Studio Code Extensions. You need to install it in order to have this option
Hello, thank you for commenting and information. Yes, I should have mentioned that at the beginning of the video. Were you able to get one built?
Best of luck with your mods :)
I'm trying to flash an Ender 3S1 with the F4 chip and get an error unless I choose no bootloader? Any idea why? I have successfully used your guide on an Ender 3V2. Thanks!
Hi Todd, Unfortunately, I don't have any experience with the F4 chipped printers but came across this reddit article that might help.
www.google.com/search?q=Creality+F4+chip&oq=Creality+F4+chip&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIHCAEQIRigATIHCAIQIRigATIHCAMQIRigAdIBCTI1OTYyajBqMagCALACAA&client=ms-android-motorola-gfw&sourceid=chrome-mobile&ie=UTF-8
Given the F4 chip, it’s probably safest to use precompiled firmware or stick to factory. I used the Professional FW with my S1 for a while before attempting to compile my own firmware (which I do for the Pro and CR10 models). After a few tweaks, the motherboard stopped responding and never worked again. I ended up buying a new Creality STM32f401 RET6 for the S1 to replace the bricked board. However, I couldn’t resist tinkering, so I tried compiling Miguel’s professional firmware again, this time with minimal features. Now, I’m convinced that compiling the firmware myself caused the motherboard to fail because this new one is dead too… lmao.
I’ve compiled Marlin for other printers many times, but if I buy a third motherboard for the S1, I’ll try to resist modifying it… lesson learned, hopefully. I might even pull the sprite extruder and other parts for my other printers just to avoid the temptation of messing with the S1 again. This motherboard doesn’t get past the Creality screen and creates an empty DWIN_SET folder inside the STM32F4_UPDATE folder with the .bin file after a flash attempt… so weird.
bro thank u so much
You got it, buddy, I'm glad you found value in this video for your viewing time.
Best of luck with your mods!
idk what I am doing wrong but the pyw file wont open. Im getting quite frustrated with this as I was hoping to swap from jyers due to the filament change not working properly. any help or insight?
edit : once I got python 3.12.2 and took the 3.11 off, then set the pyw file to always open in python, it opened and I was able to get it on my ender 3 max I converted to the neo version.
Hi Casey, Thank you for commenting, It's probably a Python software version issue. These are the ones I use that work for me.
mega.nz/file/8ZtzWbIB#tC8YcXUnlONHT1A9IX_GE6JUOTHD1Z2QO6c-PBp30oo
@vbared I got to reading and previous to python 3.12, it wouldn't work with newer windows OS. So I tried that version and got it to work. My problem now is that my x axis motor will randomly stop or act like it's triggering the end stop. As in, if I home the x axis, it may stop prematurely and act like it's hitting the endsstop from a distance.
Thank you
Hi Adam, Thanks for commenting. The configurator is a powerful tool that makes compiling a custom firmware a piece of cake.
Best of luck with your mods!
Auto build marlin seems to fail for me. The errors are along the lines of
error: missing binary operator before token "("
4152 | #if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
| ^
Error: Failed to parse Marlin features. See previous error messages.
Any idea why?
Hi Gabby, Thank you for commenting. Visual Studio, retains previous session data so if a previous session has problems they would carry over to a new session. There is a way to clear this data so you can start fresh but for the life of me I can't remember how I used to do it. Search for how to clear Visual Studio data or cache to find the method to fix it.
@@vbared I installed VSCode specifically for this because i dont usually have to deal with projects big enough to warrant a very robust IDE. However, I was able to resolve the issue last night. It was a mismatch between the firmware files when downloading the latest releases. I think the PDF instructions should be updated to say that you must download the files presented on the main page itself by clicking on the big green button and downloading as a ZIP instead of downloading from latest release.
@@gabbyaraniego396 Hi Gabby, great point, it's been some time since I used Miguel's Professional Firmware. I'll have to revise the process for anyone using Marlin based firmware. Thanks for the heads up and solution.
@@vbared Thank you for your hard work. This is probably the best tutorial for those who have absolutely no experience with firmware building.
@@gabbyaraniego396 I appreciate you, Gabby, thank you.
I am using an SKR mini E3 with an Ender 3 v2, can I use this to compile firmware that will work with a filament runout sensor and a NEO pixle LED strip?
Hello bucket638, Thank you for commenting. Yes, the SKR Mini E3 is supported and the filament sensor should also work out of the gate. Unfortunately I don't have any experience adding firmware control for LEDs. You may want to ask this question in Miguel's Professional Firmware's discussion group - github.com/mriscoc/Ender3V2S1/discussions
cannot get this to work. the files I download are not the same at the link in google as the ones you are showing you downloaded
Hi Foleysshop4258, I hear you, it's super annoying when programs are broken through updates. Linked are the program versions that I used in the video.
mega.nz/file/8ZtzWbIB#tC8YcXUnlONHT1A9IX_GE6JUOTHD1Z2QO6c-PBp30oo
Let me know if these work for you.
Very useful information! ⭐🙂👍
Thank you friend, I'm glad you found value in this video for your viewing time. Best of luck with your mods!
Hi, th
ank you for the great video, how do you tell which display you have? i cant find documentation for that. my printer is a stock E3 S1 with the encoder knob screen
Hello Dmenzie, Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time. Linked below is how to tell which board your display has.
github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
Best of luck with your mods!
I followed the steps you outlined but the UI doesnt pop up when I attempt to open Configurator.pyw, VScode just displays the script. Did i miss something?
Hi Andrew, Do you have Python installed. If not install it and if it is make sure to associate the .pyw to open with Python. If VScode is opening the .pyw file then it won't work.
@@vbared I tried opening it. It looks like a window ties to open but it closes right after and nothing happens. I tired opening it in Visual Studio Code. It gives me an error saying a file was not found.
@@lliaolsen728 Hi Llia, It might be a software compatibility issue, try and see if these versions that I'm using work for you.
Visual Studio Code: 1.84.2
Python: 3.9
Thank you for the excellent video and clear instructions. I've never done anything like this before but managed it. I do have one issue and that is the CR touch is still probing at 235 x 235 how to I get it to probe at the new bed size?
Hello, Look through the advanced menus for a setting that expands the probe area to bed max, just be mindful of the bed clips the first time you run it. The firmware has a bunch of adjustments. Make them as needed to avoid the bed clips while probing what's left.
Best of luck with your mods!
@@vbared It turned not to b the probe settings but the bed size. I had a look at the stock firmware and the max bed setting didn't have numbers it had text so I copied it.
Instead of MAX_BED_POSITION 300
I changed it to MAX_BED_POSITION MAX_BED_SIZE
That has worked and the printer now probes all of the bed. The positions are off slightly but at least it now knows the bed size so I'll go back in and look at the advanced settings.
@@vbared Hi, took some messing about but it turned out to be the max bed size. Putting X_MAX_POS 300 didn't work but X_MAX_POS X_BED_SIZE did. It then probed the print area and after tweaking the physical size on the printers screen it's spot on. Thanks again for the video and info.
@@ME-eg5gy Excellent news, I'm glad you found the right place to make the adjustments.
Enjoy all the new features :)
Hi Victor, im trying to do the same on my cr10 max. I've also installed sprite extruder kit. my question is how did you find your x and y min and max positions?
Cheers, Love your work.
Hello Bikramjeet,
Thank you for commenting and encouragement. I'm glad you are finding value in the videos for your viewing time. Wow, a CR10 Max, you got the big boy printer.
Home the printer and then have it move the z-axis down to about 2mm off the bed and turn it off. Place a piece of painter's masking tape directly under the nozzle and mark a little circle on the tape directly under the nozzle. Manually move the print head over to the right side as much as it will go without hitting anything. Place another piece of tape under the nozzle like before and mark a little circle using a pen. If the nozzle is off the bed then place the tape on whatever surface is under the nozzle and make your circle there. lastly measure the distance between the two marks in mms, that will be your max position. Minimum would be zero. Do the same with the Y-axis. Once the firmware is configured, compiled and flashed to the printer you can verify the min and max. Adjustments can be made in the settings section.
best of luck with your mods!
when i open the python Configurator file nothin is happening it aint opening the configuration program
Hello lilou_M1, thank you for commenting. The file extension might not be associated with the right correct program to open it. Linked is a possible way to resolve the issue.
stackoverflow.com/questions/16072837/python-is-not-opening-py-files
what if it wont open the configurator?
Hi Jordan try finding Python 3.9 if you are running a newer version of it. It might be a compatibility issue with configurator being written using an older version.
Hey, thank you so so much for this video. It has been incredibly helpful as I am terrible with all of this code stuff and it's taken me hours. I did have one question though, do you know how to flash the screen for TJC? I updated the firmware part, but then I tried with the one in the display folder after all of compiling and it only gave me a white screen that said success, but not the orange and then blue screen.
Hi Jenny, Thank you for commenting. I don't have any personal experience with a TJC screen but have been told that it doesn't need to be flashed. The only important thing is to make sure the correct selections are set in the configurator prior to flashing. I believe that a couple of things that might be different is custom icons may not show on the TJC display because it can't be flashed like the DWIN display and the blue and orange flash confirmation.
@@vbared sweet, thank you so much! I was going insane trying to figure that out lol
Hello. I have ender3v2 using motherboard version 4.2.2. I want to select BLT, DWIN, T1, HomeOffs, IS, LA, MPC but after I did the steps as you instructed with my printer I got this message:
Resolving STM32F103RC_creality dependencies...
MissingPackageManifestError: Could not find one of 'package.json' manifest files in the package
I ignored it and compiled but couldn't find the .bin file in.pio
I hope that you can give me a solution. Thank you very much.
Hi LongLe-pd9xt, Thank you for commenting. Visual Studio and Python don't always play nice and I just try different things until I can get it working. I compiled it for you based on your selection so in the meantime you can get your printer going.
drive.google.com/uc?export=download&id=1Jg-ZylUvWx1zzb7rcBLSxsVIgdrM7Slv
@@vbared Thank you for your help.
@@AnywhereIGo-LongLe Anytime :)
@@vbared Is the firmware you attached for the 256k or 512k chip?
@@AnywhereIGo-LongLe The 4.2.2 board is 256k the attached firmware is compiled for that board. I just added the screenshot to the .zip file so if you download it again from the link it will contain the auto-build menu so you can confirm the bin file number.
Hello. Thanks for all the great step by step. I was wondering if I would be able to use my 4.3 creality touch with this firmware. I've been using FirstLayer and it allows me to print but I am unable to calibrate e-steps, load or unload filament but I manage to get some ''Draft Prints'' out of it.
I have an Ender-3 with the following...
filament run-out
BLTouch
Direct Drive
and the 4.3 creality touch
Thanks, hope you can help.
Hi, Thank you for commenting and encouragement. I'm glad you found value in these videos for your viewing time.
Unfortunately, Miguel's Professional Firmware only supports the displays listed in the configurator tool at this time. Miguel does a great job of actively adding new features to it but most of the touch Creality display's aren't open source. Developers simply don't have the access to data they need to incorporate them. You mentioned having an Ender 3, is it the base printer that comes with the green control board or is it the black 4.2.2 or 4.2.7?
Best of luck with your mods!
It now has a 4.2.7, thanks for replying.
@@ggate01 Perfect! If you pick up either a Raspberry Pi or Bigtreetech' P4B+CB1 you can run Klipper and use an old smart phone as the touchscreen. Klipper is so much more advanced than Marlin and uses a standard web browser to access the printer controls. So anything that can go online can be used as the printer controls.
Thanks, I’ll give that a shot. Been talking about doing it, guess it’s time. Thanks again for your help.
Good video
Hi Madvelila, Thank you for your kind comment.
Best of luck with your mods!
WARNING ! January 2022 Creality started shipping the 4.2.2 board with a 256K chip instead of the 512k chip they used before. So far it's only for the 4.2.2 board, it's not clear if it will make it to the 4.2.7 board as well.
You can find a video about it here Creality 4.2.X Chip Change - Details Inside!
Hello Xefo, Thank you for the info on the chip swap. It's unfortunate they are going down this path.
Best of luck with your mods!
Yes, and he suggested using the 256K option for 4.2.2 boards, which is good as it would minimize issues (makes it universal).
hai sir. when i try to open the 'configurator.pyw' and nothing happen allready resintall and trying other laptop still same..
Hello friend, Thank you for commenting.
Make sure that you have Python installed :
www.python.org/downloads/release/python-3114/
and On Windows, .pyw files should be opened by pythonw.exe by default.
@@vbared hai sir, that problem allready resolve. and then a new problem come in.. when im about to build the marlin firmware (im using STM32F103RC_CREALITY(256K) 4.2.2 BOARD). it pop out unter problems tab and it say 'could not find 'package.json'.. im in learning proces and im sory.
@@amirulazim3536 I also had the same problem as you. How did you solve it? Can you or someone point it out to me?
@@AnywhereIGo-LongLe i also wait from the owner..i stuck at this point
Hey man I’m having trouble uploading the bin file to my printer. I got a cr10s pro v2 with the sprite extruder.
Hello Fudi Killa, Thank you for commenting. Is your CR10S Pro V2 running the stock control board?
@@vbared Bruh legend I’ve been hopeless and didn’t expect a quick reply😅. Yeah I’m running the stock board. I put the exact same options you did on the configurator.
@@vbared I’ve been told it only accepts a hex file but idk how to manipulate the bin file to work
Oh except for the thermistor I put a T13 that i have on the sprite extruder
@@user-dj3zu1ur3dHi Fudi Killa, The CR10S Pro V2 is an ongoing project. I swapped out the original 8 bit board and stock touch display for a 4.2.7 board & Ender 3 V2 stock display so I could run Miguel's Professional Firmware. Unfortunately this firmware doesn't support the CR10S Pro V2s stock board. Linked below is the video I made on the board upgrade.
ua-cam.com/video/Ukx4Ahnw5as/v-deo.html
Best of luck with your mods!
Can i able to upgrade my cr10s pro with a mks Robin e3 mainboard...!? It's same as creality silent board.
Hello Visesh, Thank you for commenting. Yes you can but the firmware isn't nearly as polished as Miguel's Professional Firmware. Which means that you will need to download a prebuilt MKS Robin firmware with the options you need.
@@vbaredi need your help!, actually i did as you said but I do have btt srk mini e3 v3.0 mainboard. I have configured everything accordingly but I got stopped at one spot. 16:00 from that spot i couldn't able to do what you did. What i actually meant is i couldn't able to find any option called "Auto Build Marlin". What should I do...!?
@@ViseshMinerva Hi Visesh, There is a small check mark along the bottom blue bar that will also compile the firmware but without the board specific checks. I used to always use it instead of the auto build Marlin.
@@vbared hi buddy but it didn't show any ✅ marks...!?🤔
@@ViseshMinerva Sorry about the delayed response been feeling a bit under the weather. I made up this picture to show you where the compile icon is - mega.nz/file/0YlxRbpZ#7IcMPxtwbyj9iJUF89Gt6YOo6O1xvoxXJHPhnUr-XsA
Hey Victor thanks so much for the video! Legend. Trying to compile for the type five, ATC SEMITEC 104GT-2 thermistor. I’m having issues with it working on my computer. Would you kindly be able to compile for me. Ender 3 v2 micro Swiss NG, BL Touch with a 4.2.7 Board, Dwin display and ATC SEMITEC 104GT-2 thermistor (t 5). Many many thanks.
Hi Mr. Scott, Thank you for commenting and encouragement. I'm glad you found value in these videos for your viewing time. Linked below is the firmware you requested. You'll need to setup your probe offset, and e-steps for the Micro Swiss NG.
Let me know how it all works out for you.
mega.nz/file/kcV0lYJD#sEeA1sv9cISuQPgslAhXDBWlSxDK2O0eUY5AvVpP4bM
Mate, you are a real legend of the printing community! Thank you very much.
@@mrscottjgvincent Anytime, buddy, let me know how it works out for you.
What is "NP" under features?
Hi Cory, Thank you for commenting. I noticed NP & Speaker as of this current release but have not seen it updated in the wiki yet - github.com/mriscoc/Ender3V2S1/wiki
merhaba dostum ender 3v2 4.2.2 anakart ve red lizard hotend için bir yazılım derlemen mümkün mü ?
Lütfen bana CR-Touch'ınız olup olmadığını ve hangi model ekranı kullandığınızı söyleyin. Hangisine sahip olduğunuzu belirlemek için aşağıdaki bağlantıyı kullanabilirsiniz.
github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
@@vbared hi friend. MY SCREEN IS DACAI, MY LEVELING PROBE IS 3D TOUCH AND THE EXTRUDER I USE IS KINGRON TITAN DIRECT DRIVE (MY PROBE IS OUTSIDE THE PRINT HEAD, THAT'S WHY I'M HAVING POSITION PROBLEM)
CORRECTION : MY PROBE IS ON THE RIGHT SIDE OF THE PRINT HEAD
I WOULD BE HAPPY IF LA IS ACTIVE@@vbared
@@Ztoizmm Please link a picture of your hotend so I can see it.
Thank you for posting this video, your informations are precious. I would create the custom firmware for my Ender 3 Max Neo, but I’m not sure about the initial configuration. I have to use the same file as the Ender3V2S1-Ender3V2S1-Released?
Do I follow your same steps for configuration?
Thank you and sorry for my english.
Hello Lucas, Thank you for commenting and encouragement. I'm glad you found value in this video for your viewing time. First thing you need to determine is what board is inside the display. Use this like to determine which one you have - github.com/mriscoc/Ender3V2S1/tree/Ender3V2S1-Released/display%20assets
Yes, the Ender 3 Max Neo is essentially a big Ender 3 V2 so flashing it is the same.
Your English is perfect, I understand your just fine.
Thank you Victor, I'm animated by courage and fortunatly I was able to upgrade my printer. It seems to be all ok for the moment, the diplay is updated automatically and now I have more functions.
@@lucaspennato5616 Excellent news, enjoy your new capabilities.
Best of luck with your mods!
. @vbared Unfortunately, the firmware is giving me problems. The printing starts in the corner almost outside the edge, when it ends it returns to the right side instead of the left side, I almost was damaging the motor. these are issues I don’t know how to fix. I haven’t changed anything except the firmware. Have you a fimware that it's work good?
@@lucaspennato5616 Please tell me the selections you used in the configurator tool.
I can't open de configurator.
I had that issue also until i realized i need to change the file association to python.exe instead of pythonw.exe.
@@DuaneBendt-ch2od So you've chosen a different app, but then you typed 'pythonw.exe' in the Explorer window that opened, and opened that one after.
@@robbevaneekelen did my response really disappear? anyway, right click the configurator file and choose properties. under the general tab near the "opens with" click on "change" that will open another dialog box then choose more apps, scroll down to the bottom and click on "look for another app on this pc" navigate to C:\program files\python 311(or whatever version you have)\python.exe highlight it then click open. then click apply and then ok just to make sure. then you should be able to run the configurator. oh, and i never ran it from pythonw.exe. and my printer is working perfectly.
Hello, Have you tried as to associate the python.exe association as Duane suggested. If that doesn't work for you try finding Python 3.9.7 instead of the most recent one. It will properly associate the files out of the box.
I mean in the special configurations file for mriiscoc
Hello, please check your other message for the file versions you need.
hello It gives me this error "platformio run --silent -e STM32F103RE_creality ; echo "done" >|"/var/folders/s6/s6x66p3900dbl_67sv3gqb7r0000gn/T/ipc"
marcelrios@MacBook-Air-de-Marcel-2 Ender3V2S1-Ender3V2S1-Released % platformio run --silent -e STM32F103RE_creality ; echo "done" >|"/var/f
olders/s6/s6x66p3900dbl_67sv3gqb7r0000gn/T/ipc"
warning: Calling missing SConscript without error is deprecated."
Hello Marcel,
Thank you for commenting. I'm not sure why you are getting this error. Are you running this on an Apple machine? Sometimes they don't play well with these types of software.
@@vbared hello if I run it on apple, but I never got any trouble in compilation
@@marcelrios806 If you like send me the settings you need and I'll compile it for you. I don't have experience using Apple OS so I'm not sure what to try to fix that error. Maybe Google search the error to see if it's been addressed on a forum.
@@vbared very thankful .
I was building for an Ender 3 V2 with 4.2.7 board but with a Spice Pro (T13) extruder.
I looked for information in forums but I didn't find much, it's very rare since I always put all the previous versions of marlin on my mac without problems, this is the first time this has happened to me
@@marcelrios806 Python is picky even on Windows. On it I just remove Visual Studio and Python and reinstall then making sure to select all file associations.
BTW which display board does your Ender 3 V2 have and are you using a CR/BL-Touch?