Huawei Honor 8 Screen Repair, Teardown and Reassemble - Fixez.com

Поділитися
Вставка
  • Опубліковано 18 лис 2024

КОМЕНТАРІ • 109

  • @leonidassparta72
    @leonidassparta72 8 років тому +110

    The only thing i know after watching the video is that i am not doing this by myself

    • @vincen.3590
      @vincen.3590 7 років тому

      The video was prepared to make it looks easy. Very hard to open this phone in reality. Instead, I got it fixed at here: www.ebay.com/itm/372066414649?ul_noapp=true

    • @TrendK1ller
      @TrendK1ller 6 років тому +1

      It really isn't as difficult as it may seem. Unless u have never done this to any phone or device, then it may not be a good idea to do this by yourself.

    • @jamillejeez4404
      @jamillejeez4404 5 років тому

      @@vincen.3590 Quiter

    • @RaviPatel-lk4ho
      @RaviPatel-lk4ho 4 роки тому

      I am also not gonna open this phone by myself bro

  • @orngfuzz
    @orngfuzz 7 років тому +10

    Success!! Budget about 1:45 hours to do this if it's your first time. Took me about 1:45 hours for my first time.

  • @nitinbhasin8898
    @nitinbhasin8898 6 років тому +1

    Thanks... took me 2hrs 30 minutes for the repair

  • @annatm407
    @annatm407 7 років тому +3

    Hi there! Thanks very much for this really well done tutorial. Do I have to follow all the steps if I merely want to replace the front glass (NOT the LCD) ?

  • @TheBlooRayChannel
    @TheBlooRayChannel 8 років тому +14

    Interesting that the battery reads 2900mah, while spec sheets say its a 3000mah battery? What's the deal with that?

    • @danilishei
      @danilishei 5 років тому

      it depends on voltage -- higher voltage -- lower mAh and opposite

  • @grovesson
    @grovesson 4 роки тому +2

    Fixed my friends phone ty

  • @trythefly
    @trythefly 7 років тому +1

    I followed these and a couple of other video's steps successfully and took my time doing it. It was a royal pain in the ass and the battery glue removal was the harder parts. It is do-able though. One thing I added was removing the thermal paste on the processor and adding a dab of Arctic Silver 5. It lowered the temps a few deg, so i was a small thermal mod as well.
    I was all proud of myself for a few weeks and the flippin new screen cracked as well. Now I'm terrified to attempt this a second time on the same phone. Might just use this one as target practice and buy an Honor 10....

  • @jezb7535
    @jezb7535 6 років тому +2

    Thanks for the video. I've just fitted my new screen. My advice for anyone else attempting this would be to buy the screen & frame combo, along with a new battery & antenna cable. The battery was a nightmare to get out and you can't help but bend it slightly as your trying to prise it away. Much better idea is to leave the battery in the old frame, and fit a new one in the new frame/screen combo. The antenna is now somehow about 5mm longer than when it came out, and makes it very difficult to get everything closed up. Have a new one ready instead. I managed to get the battery cover off mine by just using the heat from a radiator and a suction pad & opening triangle. God that battery! :o( You'll need a deck of cards with 5 aces in it.

    • @Fixez
      @Fixez  6 років тому

      You're welcome! Glad it worked out for you! And thank you for your feedback on your experience as well!

  • @nokru85
    @nokru85 6 років тому

    It was very easy and very simple instructions. Thank you

    • @Fixez
      @Fixez  6 років тому

      Thank you for the comment and also please be sure to subscribe to our channel. Also take a moment to visit our webpage www.fixez.com

  • @DjZeldoman
    @DjZeldoman 7 років тому +7

    I managed to puncture the battery with a playing card how the f is that even possible......

  • @DavideMarchi
    @DavideMarchi 7 років тому +1

    ottimo grazie mille, quando farò il lavoro avrò la guida perfetta

  • @H3nezz90
    @H3nezz90 7 років тому +9

    i know by watching this videos that this would be " How to break your honor 8. I just wonder why they don t anymore make changeable batteries to smartphones

    • @RockinRobbins13
      @RockinRobbins13 5 років тому

      I'm not intimidated and this is by far the best video on the Internet for this procedure, but I'd love to have the choice to buy a phone with an easily replaced battery. My repair is going to cost me an extra $24.00 because I ripped the display ribbon cable, necessitating a complete teardown and screen replacement. Hmmmmmm. $24 to fix a $300 cell phone (now about $175)..... is it worth it? Heck yes! Full speed ahead.

  • @alexstrijder
    @alexstrijder 7 років тому +14

    The glue on my battery was way too hard, I tried the playing cards and they were too soft, both plastic and pasteboard. Ended up using my credit card, but even being extremely careful the battery ripped a little bit. It could be just my phone, but removing the battery was a bitch. Everything else was pretty easy.

    • @mikesteini8376
      @mikesteini8376 7 років тому

      Alejandro Leyva did everything work afterwards?

    • @benjaminkottmann7381
      @benjaminkottmann7381 7 років тому

      and how are your photos in darker surroundings? after i replaced my backcover, i get really bad pictures, with flashligt in darker surroundings :( tried with a lot of adhesives between flashlight and camera, but i always have a shine/foggy glimmer, in the picture. Because of the flash. :(

    • @alexstrijder
      @alexstrijder 7 років тому

      I did notice that when using the flash, but not always, is like a smudge. During the day or at night with light no problem. Also try holding the phone really steady because it takes a bit more to process the image at night.
      My guess is that is probably dust, dirt or the tape. I'm going to open it up again and put new tape, clean the cover, and use compressed air to remove any dust remaining, it should be quick. I haven't done it because I don't take a lot of pictures and I ordered an new back cover with a different color (parts for this phone are cheap since is from china).

    • @benjaminkottmann7381
      @benjaminkottmann7381 7 років тому +1

      +Alejandro Leyva hello :) i have tried everything. new back cover. new plastic frame etc. but it's always the same problem :( i know this problem with sony xperia Z5, for example. if the back panel don't has the original seal/adhesive to protect the camera of the flash light. :( i dont know what i should do. dont find real original frame with original adhesive.

    • @alexstrijder
      @alexstrijder 7 років тому

      Benjamin Kottmann that sucks man, my suggestion would be to contact honor directly, not Huawei, I believe they have different customer service. Also did you put tape in the gaps between the cameras and flash?, that may help. And where did you buy the cover from, i got mine directly from China.
      m.ebay.com/itm/Glass-Rear-Back-Cover-Battery-Door-Middle-Frame-Bezel-For-Huawei-Honor-8-Black-/272555433068?nav=SEARCH

  • @LFish
    @LFish 8 років тому +10

    And which of these steps can I skip when I only want to exchange the display?

    • @Fixez
      @Fixez  8 років тому +14

      This device must be mostly disassembled to remove the display. Speakers, motherboard, battery, headphone jack, and daughter board should all be removed to prevent damage from heating the display.

    • @Shiqari145
      @Shiqari145 6 років тому

      not true. You just remove the battery and open the front display like the back and pull that display connector

  • @Kopirka55
    @Kopirka55 6 років тому

    awsome video everything clear my phone work again thank you very much

    • @Fixez
      @Fixez  6 років тому

      You're welcome, thank you for the support!

  • @hitmannor1983
    @hitmannor1983 8 років тому

    Love this:)
    i need to change my rear glass panel:/ How do i remove the fingerprintsensor from the broken panel and attach it to the new rear glass panel?
    Tried to find the parts and tools at your website...but there is nothing there to buy:(

    • @Fixez
      @Fixez  8 років тому

      You can remove the finger print sensor by heating the glass back and using a spudger to pry it free. We don't currently have parts in stock if you would like an accurate time frame of when they will be available please feel free to email us at support@fixez.com

  • @RaymondLindseth
    @RaymondLindseth 7 років тому +1

    Do you have to buy a new backside too it aswell? Since the old glue is used?

    • @florianweikert7950
      @florianweikert7950 7 років тому +1

      Raymond Lindseth no, you can glue the old one back on, but it probably won't be as tight as before

    • @RaymondLindseth
      @RaymondLindseth 7 років тому

      Allright, thank you!

  • @thakkardeep619
    @thakkardeep619 6 років тому +1

    Thank you for this video it helped me very well

    • @Fixez
      @Fixez  6 років тому +1

      Thank you for the comment and also please be sure to subscribe to our channel. Also take a moment to visit our webpage www.fixez.com

  • @tenteamarian1831
    @tenteamarian1831 6 років тому +1

    Very nice. Thank you

    • @Fixez
      @Fixez  6 років тому

      Thank you for the comment and also please be sure to subscribe to our channel. Also take a moment to visit our webpage www.fixez.com

  • @vivsoares3330
    @vivsoares3330 7 років тому

    This video saved me. Thank you sooooo much!

  • @sbeaber
    @sbeaber 7 років тому

    I bought an assembly instead of a just an LCD digitizer combo. Its not really that hard. I imagine, however, it is a hard "first timer".
    The glue for the battery is on tight. Very tight. I was worried about heating it up too much...I ended up tearing the battery shrink wrap. No leakage but it did have a distinct "medical" smell that made me worry. Bought a new battery for 9 dollars. Tip: The guides don't have you remove the IR blaster don't forget to bring it over to the new assembly.

  • @Fireballz
    @Fireballz 7 років тому

    After the screen replacement, the light sensor and the doble knock doesnt work, Do you have any ideas to fix that? Thanks!

  • @grenade-im5rg
    @grenade-im5rg 7 років тому

    your video rewened my phone

  • @war-dhab
    @war-dhab 8 років тому

    can you do video on how to change the on and off botton mine broke and it keeps turning on and off all the time

  • @DavideMarchi
    @DavideMarchi 7 років тому

    ma quando sostituisci il vetro posteriore bisogna sostituire anche il sensore d'impronta o si può rimuovere dal vetro?

  • @fed9237
    @fed9237 7 років тому

    does it will effect the phone if me use the non Ori LCD display?

  • @joelmerimaa9169
    @joelmerimaa9169 7 років тому

    Did you heat up the phone when using the playing cards to dislodge the battery? Mine is pretty well stuck on and I'm struggling with it.

  • @macinstosh9557
    @macinstosh9557 7 років тому

    how do you take the fingerprint sensor out of the rear glass panel? I broke the back of my Honor 8 and I am trying to repair it but the new back cover I ordered doesn't come with a fingerprint sensor. it just has a hole there, as if I should remove my old one and put it into the new back cover.

  • @stephentyndall159
    @stephentyndall159 7 років тому +1

    What if you just want to replace the front glass? Do I need to follow all these steps?

    • @DYDKLK8
      @DYDKLK8 10 місяців тому

      No, just the battery, finger print scanner and the frame thingy (I know this comment is 6 years old, better late than never)

  • @druszan17
    @druszan17 8 років тому

    Hello ! I broked my honor 8's back glass . what you think will i loose the guarantee if i replace it myself?

    • @Fixez
      @Fixez  8 років тому +1

      Repairing any device yourself will void any warranty.

    • @RockinRobbins13
      @RockinRobbins13 5 років тому

      @@Fixez You need to sell t-shirts that say "I void warranties." I consider that bragging rights.

  • @nadiralallaoui
    @nadiralallaoui 7 років тому

    how much will it cost me if I let you do this ? my front glass is broken and as you turn on the screen after 5 seconds it begins to show weird things so after a minute you can't see what's on the display so I also think the lcd should be replaced it also begins to click on random things by itself after a minute so you can't use the phone normally but the touchscreen works fine

  • @lordsofthe_memez6592
    @lordsofthe_memez6592 7 років тому

    can you tell me its both ic names plz i really need it

  • @xavierkhoo1337
    @xavierkhoo1337 7 років тому

    is it necessary to use red adhersive rolls or other adhersive rolls

    • @DYDKLK8
      @DYDKLK8 10 місяців тому

      literally use anything sticky, as long as it sticks it works, if you dont wanna drown your device after you drop it in water then i’d recommend buying the rolls. (I know this comment is 6 years old but sometimes i wish someone responded to my comments no matter of the time frame

  • @azertel8715
    @azertel8715 8 років тому

    i didn't find the screen LCD in your site ?

  • @mikmak3154
    @mikmak3154 7 років тому +3

    I think ill pay someone else to do it. Ill watch with a beer.

  • @scarecrow229
    @scarecrow229 7 років тому

    I have a honor 8 lite and I dropped it into the water now the both cameras are covered with water vapours is there any solution for it?

  • @nakunako4593
    @nakunako4593 6 років тому

    Thank you!! I Did it.

  • @anthonynguyen1591
    @anthonynguyen1591 7 років тому

    Is it possible to replace just the front glass? I found the part for about $3, but I hear that you pretty much have to replace the whole front screen assembly, even if it's just for the broken front glass.

    • @Fixez
      @Fixez  7 років тому +1

      Glass only replacement requires specialized machinery and is outside the scope of our videos.

    • @florianweikert7950
      @florianweikert7950 7 років тому +1

      I tried replacing only the front glass first, but then the display broke... But with the help of this Video I could fix replace it! Thank you!

  • @cedvilleneuve
    @cedvilleneuve 6 років тому

    I think your playing cards should be a weapon in the next hitman game

  • @김휘래-y4r
    @김휘래-y4r 7 років тому

    Can I know the nane of the tape that you used at 13:48? I have to repair my honor 8 but I don't how to reassemble battery cover.

    •  6 років тому

      in the beginning of the video he tell you: 2mm Premium Red Double Sided Adhesive Roll

  • @reinbjartehakestad2813
    @reinbjartehakestad2813 7 років тому

    Hi
    There was no glue on the new screen and there is not any glue left on the frame. What type of glue can be used here?

  • @hilfemeinmuslibrennt4329
    @hilfemeinmuslibrennt4329 7 років тому

    My back is splitted. I just have to remove the cable of the fingerprint thing? And back? Please help me!

  • @aidanevans3930
    @aidanevans3930 8 років тому

    Is there any way to replace only the glass of the screen and not the digitizer?

    • @Fixez
      @Fixez  8 років тому

      Glass only repairs require specialized machinery and are outside the scope of our repair videos.

    • @aidanevans3930
      @aidanevans3930 8 років тому

      Fixez.com OK thanks for the reply :)

    • @jankie4932
      @jankie4932 8 років тому

      So it's possible, yes? I live in Poland I hope that the authorized service has possibility to do this. Greetings!

  • @leliocarassai9589
    @leliocarassai9589 7 років тому

    Hi everyone, I should replace the back cover on a Honor 8 where the fingerprint sensor is housed, but I do not know how to remove the sensor.
    Can you tell me how to do it or a tutorial?
    Thank you...

    • @DYDKLK8
      @DYDKLK8 10 місяців тому

      just push it in lol

  • @benjaminkottmann7381
    @benjaminkottmann7381 7 років тому

    Where i get good spare parts? after i replaced my backcover, i get really bad pictures, with flashligt in darker places :( tried with a lit of adhesives between flashlight and camera, but i always have a shine/foggy glimmer, in the picture. Because of the flash. :(

    • @robertkjotar1877
      @robertkjotar1877 7 років тому

      Benjamin Kottmann Did you fix this? About to open mine but not too sure when i read your comment

  • @herbhamtaylor
    @herbhamtaylor 7 років тому

    Hi, removed the broken glas from my Honor 8 with heat and a card. Now i have only a blank screen! What went wrong?

    • @ayounghosh9218
      @ayounghosh9218 7 років тому

      Herbert Hamacher maybe u accidentally snapped the display wire

  • @hawkmickler4907
    @hawkmickler4907 7 років тому +1

    Sweet look easy compared to my htc one m8

    • @hawkmickler4907
      @hawkmickler4907 7 років тому

      Levi Crandall Yeah, people complain too much they are not hard to work on, just harder than most phones.

  • @carolcheny
    @carolcheny 7 років тому

    Huawei is charging $100 to do this and now I think it might be worth it.

  • @whitelandwarriors08
    @whitelandwarriors08 7 років тому

    I wish the front glass was easier to replace

  • @Nerben666
    @Nerben666 7 років тому

    My Fingerprint Sensor isn't working, after reparing my smart phone. Any ideas?

  • @beatsbydr.draven1932
    @beatsbydr.draven1932 7 років тому

    6:24 The little piece ripped what do i do

    • @gabrielvallejo4024
      @gabrielvallejo4024 7 років тому

      Swiss cheese6000 same :/

    • @beatsbydr.draven1932
      @beatsbydr.draven1932 7 років тому +1

      Damn that sucks D: Sad thing is, and they didn't say it in the video, THAT GODDANG THING DIDN'T EVEN NEED TO COME OUT!!

    • @tapsa0
      @tapsa0 6 років тому

      Search ebay or aliexpress for "huawei honor 8 vibrator" and buy a new one, costs about 3-4 bucks. And yeah, there's no need to remove it during screen replacement, it is not that heat sensitive.
      Btw the playing card in the video must be made of tough steel. My battery just laughed at cards and plastic tools, only a miniature metallic spatula did the trick.
      The display glue was really tough. I used a heat gun at 200C for 10-30s periods around the perimeter but it seemed to have negligible effect on the glue. Eventually chiseled, rolled, ripped and scraped the damn thing away piece by piece. Managed to tore some of the front bezel away too, cleaned it, glued back. If anyone asks about the sings of violence around the bezel I'll say a beaver stole my phone and gnawed it. If I had to do it again I'd buy preassembled display+frame combo.

  • @darylstricker1353
    @darylstricker1353 7 років тому

    where in the heck do people keep getting the replacement displays that say "honor" on them? everyone i find doesnt say honor

    • @GaNgStAlBeRt
      @GaNgStAlBeRt 7 років тому +4

      i would take the one without the name, but just my opinion

  • @lex4play394
    @lex4play394 7 років тому +2

    STOP. The Playing Cards should not be French. The Bavarian ones are much better :D

  • @vishnuarakuzha
    @vishnuarakuzha 7 років тому

    sad to see the beauty ripped

  • @alexandr9778
    @alexandr9778 7 років тому +1

    Отличный обзор.
    LCD Дисплей для Huawei Honor 8 недорого можно купить тут: ali.pub/18ewrh

  • @fridel999
    @fridel999 7 років тому

    wow..replacing the screen gonna be pain in the ass

  • @27siddarth
    @27siddarth 7 років тому +1

    Shouldn't you be curing cancer or something?

  • @ashengamage3756
    @ashengamage3756 7 років тому

    this thing is very complicate

  • @tempetechaz4913
    @tempetechaz4913 7 років тому

    God this was the worst phone to ever repair. I'm never taking in a repair job for a huawei ever again. The battery snapped while I took 40 minutes to get the damn adhesive off
    I HIGHLY RECOMMEND buying the lcd/screen that comes already attached to a new midframe, as it is a fucking bitch to get the screen off the old frame while not damaging the frame itself. Also be very, very careful with the signal cable, as the plug on the motherboard just broke right off as I was plugging it back in... On top of all this the screen I had ordered came with a broken power button flex cable so I can't turn on my phone to find out if i can still get wifi or not :I
    Phone from hell. lol

  • @alexisgomes6621
    @alexisgomes6621 7 років тому

    IT IS STUPID, NO NEED TO REMOVE EVERYTHING TO CHANGE THE SCREEN !!!! BE CAREFULL

    • @Fixez
      @Fixez  6 років тому

      These videos are meant as a general teardown showing the removal and replacement of all components.

  • @juusolaumo578
    @juusolaumo578 7 років тому

    MY FUCKING HONOR 8 LITE WONT RESPOND TO TOUCH. i got it yesterday and got to use it like twice