Iceriver KS0 ULTRA Kaspa ASIC TESTING! (More hashrate with copper heatsinks?)
Вставка
- Опубліковано 28 лип 2024
- Iceriver KS0 ULTRA Kaspa ASIC TESTING! Can I get more than 400gh/s with copper heatsinks on the power stages? I wanted to do further testing just to see if I could get any extra hashrate out of my KS0 Ultra. So I tore it down... FOR SCIENCE! When I took apart my KS0 Ultra to try out the copper heat sink mods I wasn't sure what to expect!
** If you're looking to purchase a Kaspa mining ASIC you can use my Iceriver discount code GREATER for 2.5% off your order!
** Check out my friends at Crypto Miner Bros and use discount code GREATER for $60 off!
** TANGEM WALLET 10% off DISCOUNT CODE!! = GREATERGOOD
**METER BOX 10% OFF DISCOUNT CODE!! = GREATER
Follow me on Twitter! / gr8ergoodmining
Check out my Discord! / discord
DISCOUNT CODES & AFFILIATE LINKS:
These links are Amazon affiliate links. I get a small commission if you use them at no extra cost to you and it helps support the channel! Thank you for watching!
- Copper Heatsinks: amzn.to/3vHPPJh
- 240 watt Power Supply is a must for aggressive overclocks!!
amzn.to/3xdREy6
- 140mm USB Fan with low, medium, high settings
amzn.to/3L5vTnN
- DUAL AC Infinity AXIAL S1238D, 120mm Muffin Fans with Speed Controller.
amzn.to/4cFcmXN
Single AC Infinity AXIAL S1238, 120mm Muffin Fan with Speed Controller. This is an option if you don't plan to aggressively overclock. You could mount this fan to the shroud kit or the top!
amzn.to/4czsiee
ARCTIC TP-3 Thermal pads:
amzn.to/3TRE4YG
Thermal Glue: amzn.to/3PR2HDT
ARCTIC MX-6 Thermal Paste: amzn.to/3PSsAmW
- ICERIVER 2.5% OFF DISCOUNT CODE!! = GREATER www.iceriver.io/?refer=GreaterGoodMining
Looking to purchase an AMAZING Kaspa mining BEAST?! Use my exclusive discount code and save 2.5% off your Iceriver order!!
- TANGEM WALLET 10% off DISCOUNT CODE!! = GREATERGOOD
I use Tangem wallet to safely store my Cryptocurrency like Bitcoin and Kaspa!!
tangem.com/en/?promocode=GREA...
- If you're looking for Crypto Mining Hardware, check out my friends at Crypto Miner Bros and use discount code GREATER for $70 off! www.cryptominerbros.com/?wpam...
- METER BOX 10% OFF DISCOUNT CODE!! = GREATER
I monitor power consumption on all my mining equipment with Meter Box power meters!
www.themeterbox.com/r?id=3cfbtn
- FRUITION DESIGNS 15% OFF DISCOUNT CODE!! = GREATERGOOD
Silence your ASIC miner and save on electricity with a Fruition Designs kit!
fruitiondesignsllc.com/
- I bought the new PDU that you might have seen in some of my videos from Altair! They also sell mining equipment, control boards, cables and have hosting services! Check them out here altairtech.io/aff/23/
- If you're looking for mining equipment, hosting, cool merch and much more check out my friends at Coastal Crypto!! Use Discount Code Greatergood for 2% off!! www.coastalcryptomining.com/?...
- I currently have GPU's & ASIC's hosted at terrahosting.io/ Great group of people running Terra Hosting! Check them out!
- Keystone Cryptocurrency Hardware Wallet affiliate link: keyst.one/?rfsn=7685725.a224f...
- I love using @coderofstuff_ Kaspa ASIC calculator! I use this calculator frequently to speculate on possible Kaspa ASIC ROI projections! Here's the link to the calculator if you want to try it out! kas-breakeven-calc.vercel.app/
Nothing I say is EVER financial advice or electrical advice. This is for entertainment only!
Kaspa reward reduction timer: www.kas.live/timer
Kaspa emission reduction schedule: kaspa.org/wp-content/uploads/... - Наука та технологія
Have you tried to FAFO with your KS0 Ultra yet? What results are you getting?!
@@GreaterGoodMining what’s FAFO?
@@NizmoMiner lol it mean "F*ck around and find out"
@@GreaterGoodMining lmfao 😂😂😂😂
@@NizmoMiner hehehe 😀
you know for a fact I did the FAFO day 1 lmao. dont remove the hash boards hahaha
Changing the paste helped mine out big time...I find they keep around 400-425 gh/s more steadily. They dont swing up and down as much. But they do run at the same temps, just seems more stable.
Thanks for doing the testing on the ultra. I was going to mod mine but it looks like I don't need to do it yet.
Yeah i think you're better off skipping mods for now. The one I left stock with fans at 40% seems to be the happiest of them all! lol
Really nice comparison, thanks for the greater good work :)
HaHa thanks! I have to admit I was really hoping one of them would stand out and get batter hashrate. Oh well, perhaps another FAFO session is in order
Thanks! My ks0 ultras will be here soon i hope there are OC's available
@@jkohutiak sounds like the overclocks are a bit tricky this time around. As soon as they are available, I'll be doing FAFO sessions and videos on them!
OC now available
Informative and entertaining 🙂💯
@sadiesometimes1141 thanks for watching 👀 😀
Thanks for the awesome video, I think I’ll leave mine alone for now.
@christopherrandle3085 yeah for now they seem happiest stock
🎉🎉Hooray for FAFO!
FIRST TO ENJOY THE FAFO SESSION!!! lol
Epic video
Thanks! I wish one of them would have stood out as the winner but it was worth a shot and I wanted to share the results with everyone :]
I have used copper shims + kapton tape + nail polish to protect everything but I had to put fans to 0% or the temps go lower than 60ºC and hashrate goes down to 320-340
Yeah these things are picky and like warmer temps for sure
maibe try watercooling , should equalize the temps and you might be able to keep it closer to optimal temperature
I'm hearing that the new firmware should keep the temps in the range it needs to be in. I'll be trying out the firmware soon to verify.
Going to need to give updates several days / a week after
I can do that too. I think running them overnight and checking the 3 hour average at the pool was a pretty good start. It really didn't seem to make a difference unfortunately
SUPER MECHAAA Kychuuu 🤣
Suupppaa mecha kaaaiju! Lolol
🤣🤣🤣
Iceriver need heat no idea why , I can cool him 43c 35c and hashrate is 340gh after turne of fan spin to heat whole box to 57c 44c hashrate go up 409gh average 395gh after few hours , ridiculous need heat to work faster , heat = degradation electronic 😂😂 my second device will arrive but better buy 2x ka box pro 1.6th it works way stability way better
The heat seems to allow more efficiency in the chips. Heated metal allows electrons to flow more freely with less resistance. We miners don't like the heat, but unfortunately it is a part of mining! :] I do wish these things werent so picky though!!
Hey boss , can you run copper heat sink machine fans at 25-30 percent. You should exceed 400mhs and do a chip temp report ?
I've already done that in previous videos. So far it seems like my Ultras are happier with no fan on top and the internal fans set to 50%. When I have them like that I usually get over 400gh
The ftc said the sticker remove does not void warranty for united states people
Oh nice, I'll keep FAFO'ING then!
@@GreaterGoodMiningchina don't listen lol. Until they sell in country with a store they can ignore it
@TechManTY. oh I gotcha. I completely ignore warranty stickers anyway lol 😆 😂
Did the Farmer Firmware works on this ultra?
Not yet
Which size copper mods are the correct ones?
The link to the exact ones are in the description of the video 😉
OK so I am one of the unlucky ones my ultra is no longer responding (no gui) I can still see it on the network anyone know how to flash it via usb ?
It probably just switched IP Addresses. Use the monitor tool and hit the ip report button to see if it changed.set static IP
@@GreaterGoodMining nope it kept the ip but I can no taccess the gui and the monitoring tool can see it but cant connect. i spoke with tswift and he said it can be fixed for a price and gave me a link to a dev but lol my telegram has some kind of ban on it where i cant message new people. I dont even use it so no idea how i got this issue lol
@k1e1v1i1n ohh I gotcha, so you tired to overclock it and it bricked because you tried to reset it while the init file was loaded into it without loading up the reset file? I can't help you unfortunately, you'll have e to go through whatever contact he gave you
@@GreaterGoodMining back up and running 100 kas for the fix
Iceriver
Iceriver ineed!
Without setting the fan the chips stay at 75°
Yeah these things definitely prefer to run hot. The auto fan settings didn't seem to work as well for me so I just went ahead and set them to 40 for this testing. I also wanted the fan to lock in at a consistent rate for all 3 machines for testing purposes. Because if the fans are set to auto it kind of defeats the purpose of trying out the usb fan etc
Hello, Where can you find temperature monitoring software?
In my Discord there is a section where you can download it
@@GreaterGoodMining ok thank you, but i have a kso ultra
@@LoopingFinder yes but you can still see 4 of the chips if you click on the regular ks0 in the monitoring took like I showed in my video
@@GreaterGoodMining Ok thanks ;)
@@GreaterGoodMining ok thanks but I can't find the link in discord
hi bro... Can I still win that giveaway?
Hello! Did you see I messaged you back about the KS0 Pro in Mining Stackers video? I will ship to Miami sir, congrats on winning! Do you have Discord or Twitter where we can DM eachother? I have a link so you could join my Discord in the description of this video. Join my Discord and send me a DM if you can!
When winer
@Stantheman-jv5kv winer? Stan my friend, I'm not sure what you mean lol
Can you please check your discord invite link? The one embedded above seems to have expired.
Try this one discord.com/invite/Y9yA49nK
@@GreaterGoodMining this worked. appreciate it.
@@oxbcat ok good, welcome to the madness! Lol