its called a challenge... if challenges were easy they would be no fun so that's why they make it hard. Use ur damn brain lol and it's all for fun so stop being a douche
Its like a bar bet just on larger scale. Everyone wants to do it the obvious way (big truck and tires) but there is a simple yet non-obvious solution. Get a truck, nothing fancy, and make it light and amphibious. Technically, they did say any "truck" that crosses.
Have you tried to turn with 38s and a front spool now x that by tractor tire and the amount of motor that needs to go into spinning all 4 of those some just don't have it's capable AF with 3 that's enough for some people
Looks like that burb was someone’s everyday driver 😕 ?? But most these trucks didn’t have locker at all?? That suburban was just flat out stupidly didn’t seem like any weight reduction was attempted lol
i mean you don't need to be locked front and rear to make it though a mud pit although that would be a huge help but even if any of these trucks had them they still wouldn't make it since they have way to big tires for the power and gears they have
@@JP-xg8cd that mud gets into every crevice and rust the vehicle out fast. All that money in the trash. I wouldn't destroy my vehicles. Nobody uses city slicker any more and you shouldn't either. I fly an airplane for fun. I spend years getting dirty at work, my dirtiest job was working as a Diesel Tech repairing a fleet of garbage trucks. Is that dirty enough for you? I'm now a supervisor in a factory, those dirty jobs are behind me now. I worked my butt off to become something better.
@inpc 3333 I work 56 hours a week and took flight lessons twice a week until I got my private pilots license. All my money went to airplane rental and fuel. You don't have to believe it and I have nothing to prove to you. I'm working on my instrumentation qualification to get my commercial license so I can make money doing it. Never settle, keep studying and maybe you can make something of yourself too. Are you happy where you're at in life. So sad.
@inpc 3333 each generation should strive to be better than the last. Your parents didn't work hard so you can be just like them. Is that not what you want for your kids?
Sounds plausible. A couple of those guys didn't even get all the in and we're stuck. There is definitely something on the bottom that won't let em hook up.
You have a point but here's my point.... these guys don't give a shit, that's how hillbillies are lol they would rather break it first than give up. Either way it's all for a good time they're having fun so who cares it's their vehicles
@@TheOliveBranch7 if everybody was as thick as shit they wouldn't have trucks to drive, or steel to make stuff with, or houses to live in. We'd still be fuckin animals
That's why the backhoe is there. He already KNOWS no one is making it across...not through the mud, anyway. lol Plus, I would think you would need to line the hole with something to keep the water from just soaking into the ground. A simple, thin sheet of stainless, stamped out to line the holes perfectly. It would be like driving on ice under all that mud. Good scam..funny to watch so many retards tear their shit up to attempt the impossible. It was so funny to watch those big monster trucks get stuck, and then some guy in a little f150 or something with tiny tires by comparison, think they have a chance at all. If they see trucks built specially for shit like this fail, why do they think their daily driver, built for comfort and highways, with off-road tires will stand any chance at all? Why even fuck it up by driving it into that shit? I bet all those drivers would fail sobriety checks..lol
This is so obviously rigged. Its like a Vegas casino, its always in the house's favor, or in this case, the "mudsino's" favor. I can't believe that anyone would think any 4x4 could go through that rigged mud hole is a dumass and deserves to get laughed at for thinking " their 4x4 is so bad ass that it cross anything "!. I'm born and raised in one of the swampiest states and I'm very experienced in driving in the woods and swamp, I've crossed many mud holes in my day and something is definitely NOT right about that hole. Its a SCAM! I wonder how much that con-man charges for admission?
I'm willing to bet, at the least it was for shits and giggles for most of the competitors. Now with that being said, they really didn't think very much about this. They've got tires as big as their engines, that probably weigh close to the weight of their engine. They should have dropped it a few feet back towards the ground, flex sealed the dog shit out of everything under the hood, and put smaller mud tires on. I'd throw some chains on as well, no one said anything about using chains. Then again, this looks just for fun.
I just checked the rules. The open class is the only ones that get a shot at the 5k. No dually unless its a factory dually i assume that means factory sized tires. No top skimmers either aka swamp buggy trucks.
It's like my uncle said. You go as far as you can in two-wheel. When you can't go no more you lock in four-wheel and back the hell out. Not floor it until the engine blows. You gotta drive that truck to work to pay for it.
C-mon billy bob let sell the farm that dad left us for $500k and with that money we build our selves a big bad ass lifted truck to go compete for 5k on the BOUNTY HOLE!!🤔🙄😩😩😩
There is a very simple and much cheaper solution to this mud hole. An average sized truck with maybe 2-4 inches of lift. 4 normal sized paddle tires maybe 33s, locked front and rear diffs, and a shit load of hp on a high revving engine. Get some wheel speed and hydroplane across it
@@brockmaine2743I don't even like trucks, I personally own lowered fast cars. However I do understand the basics, spinning your wheels at 3mph is not going to get across the water. If you watch all these videos, there's a guy that brings a truck just like that and it crushes the mud holes.
inpc 3333 what are you finna build a spaceship to go to a different galaxy and find a new planet to live on after you make this planet inhabitable with all your green house gases
They need locking diffs and portal axles. Jesus man, the differential hub is a mud trap, you're dragging your diff through that swamp. Lifting the cab won't help you if your differential is isn't ported.
Sure your entitled to try but c'mon if your vehicle isn't fully locked front and rear you have 0 chance ... but their pretty trucks do look good with a coat of mud
What bugs me is no one has switch the design up at all and brought in something with really tall axles it's the axles in the frame that gets stuck in the mud not the tires or truck get those axles and frame out of the mud and you fly through it
It's called portal axles and they are out there just very very expensive and not currently strong enough to handle those massive tires however another option is to use the frame and axles from a crop spraying tractor.
that's really ignorant! 5 grand won't pay for a new motor, but what's even more stupid is 99% don't have the locking gear's to get out of something like that it's a combination of power train, and they just creep I'm and don't move six inches but they keep on mashing the pedal ya buddy I'm still moving! 🤣🤣🤣🤣🤣
entirely to much tire flotation. a narrower agri-tractor type tire would have been a WAY better choice paired with locking diffs. notice the narrower tired trucks did a bit better as they were touching the hard bottom. the other truck were floating in the slop
Yes let's spend three times as much build up a truck and destroy all that money trying to get across the mud to earn income we could have just saved $100,000 DOLLARS....
Whooooooooo whoooooooooo let's awww go down to da muuuuuuud pit an drink sum P.B.R. an by da waaaay my sister's pregnant WHOOOOT WHOOOT IMA GUNA BE A DAD... ima b a uncle an a dad at da same time
ok......sooooo BIG tires....i get it......BIG engines...I get it....but NO lockers on the big trucks?..I don't get it.....and they should name this hole the 'sit and spin'.....
@@jameshickey3862 it's all about the gearing, em boys need way shorter gearing. (Edit) a buddy of mine actually just picked up a big lifted red square body Chevy with 44s. It tops out at 40 haha but it spins them tires like nothing.
@@kiyoponnn hey my truck with skinny tires goes through a lot more than most with wide tires then again they are rice and cane tires vs floatation tires
I seen a guy on villano beach Florida with a hummer he was doing good till he decided to go up a bump and bottomed out lol and a Chevy luv drove circles around him in 2wd the hummer was going to slow
+myyota85 hey I didn't know that about the tire size I just know something with some healthy horsepower and a set of paddles would skip across that with no problem
That's what I'm thinking as well. A locked triple axle setup with tractor tires and a large diesel engine might work. Of course, all the differentials would need to be locked.
Lol the only thing still gmc about that truck is the badge on the front. Probably a couple parts of the motor. The cab. Though I am a Chevy guy, acting like that won because it's a Chevy is silly.
Literally, wanna get through that get a lift kit. Skinnier tires (so each tire has more weight on it) don't fucking floor it going in. Take it nice and steady. Bigger tires would work but they need bigger traction groves for the mud.
The tires used give the trucks a hydroplaning effect. In essence, lifting the truck the more gas you give it. A simple redesign and locked diffs and this challenge is solved,
Dig a pit 25' deep. Fill it with slush just thick enough that trucks don't sink. Watch squid billies blow up their life savings. Repeat. Seems legit
For fun obviously
its called a challenge... if challenges were easy they would be no fun so that's why they make it hard. Use ur damn brain lol and it's all for fun so stop being a douche
@@brockmaine2743 ok brock Lesnar tell your dad to buy you some new teeth
Yep
Its like a bar bet just on larger scale. Everyone wants to do it the obvious way (big truck and tires) but there is a simple yet non-obvious solution. Get a truck, nothing fancy, and make it light and amphibious. Technically, they did say any "truck" that crosses.
when you dont move at all so you just try to blow the engine
I started to watch this with my mom, she's now my girlfriend
LMAO....
Jesus Christ🤨😂
Lol
o.O
Idk how I got here but Yeehaw
Welcome to the epic part of UA-cam!
I can't believe I watched this whole video
Andrew Horry I cant either. We are both idiots, aren’t we?
@@kathyyoung1774 Yes indeed
Is like using a mixer to make a cake boring o was hoping to see one truck out without help from the tractor
Yeah, we are all idiots I suppose...
Kathy Young Same here. Either we’re idiots or eternal optimists lol
So they spend 30k-100k just lifting and modding the trucks but dont take the time to lock the diffs, thats very dissapointing
TrailRidingGamer I spotted that too. Wouldn't take much time and money to put No Spins, in those Rockwells.
George Boyd it takes time but almost no money unless ya snap a couple bolts
Have you tried to turn with 38s and a front spool now x that by tractor tire and the amount of motor that needs to go into spinning all 4 of those some just don't have it's capable AF with 3 that's enough for some people
Looks like that burb was someone’s everyday driver 😕 ?? But most these trucks didn’t have locker at all?? That suburban was just flat out stupidly didn’t seem like any weight reduction was attempted lol
TrailRidingGamer they would bog down if they were locked or have lockers. I have a 350 with a 4 speed on 44s can’t lock something with a lot of tire
Why would you even bother trying this without being locked front and rear?
+Austin Peterman I always wonder that with these fuckin $30k custom trucks...
Right?
i mean you don't need to be locked front and rear to make it though a mud pit although that would be a huge help but even if any of these trucks had them they still wouldn't make it since they have way to big tires for the power and gears they have
Rockwell axles
Stephen Stack 30k? Uh, try 100+
At least here in Canada you're looking at 10k in tires alone
This is what inbreeding looks like.
😂😂😂😂😂😂😂😂😂😂😂😂😊
@@JP-xg8cd that mud gets into every crevice and rust the vehicle out fast. All that money in the trash. I wouldn't destroy my vehicles. Nobody uses city slicker any more and you shouldn't either. I fly an airplane for fun. I spend years getting dirty at work, my dirtiest job was working as a Diesel Tech repairing a fleet of garbage trucks. Is that dirty enough for you? I'm now a supervisor in a factory, those dirty jobs are behind me now. I worked my butt off to become something better.
@inpc 3333 I work 56 hours a week and took flight lessons twice a week until I got my private pilots license. All my money went to airplane rental and fuel. You don't have to believe it and I have nothing to prove to you. I'm working on my instrumentation qualification to get my commercial license so I can make money doing it. Never settle, keep studying and maybe you can make something of yourself too. Are you happy where you're at in life. So sad.
@inpc 3333 each generation should strive to be better than the last. Your parents didn't work hard so you can be just like them. Is that not what you want for your kids?
@Big_Lenny v1 this is not a hobby. It's a waste of time and money.
I bet $20,000 my little truck can make it across!!!! I put that little matchbox truck in my slingshot and its payday!!!!
You may have found the loophole in the deal mike!!! Lol
Haha
*Not gonna lie they had us at the first half there*
Michael Parrish the funniest shit ever
I bet 20 thousand ur truck sux
Spoiler alert
Nobody makes it
The title doesnt even say anyone passed it.
Thank you. Now I don't have to waste my time watching the remainder of it.
Thank you for saving me time
@@jesuss.4937 Title dont mean smack bud.
You're an asshole
They really need to set some rules about forward progress.
I heard the guy that runs this has a steel plate at the bottom of the mud pit so when your tires hit it there's no grip and they just spin
Has anyone ever made it?
That's the dumbest thing I've heard... All that steel to not pay out $ 5,000...
Jason Ennes that’s not fair
Sounds plausible. A couple of those guys didn't even get all the in and we're stuck. There is definitely something on the bottom that won't let em hook up.
@@oldschool86chev no its not some of them trucks you can tell should have made it
$5,000 isn't worth broken engine that's for sure.
8 to 10 g's on a new engine...
Maybe you're right 🤔🧐🤨
You have a point but here's my point.... these guys don't give a shit, that's how hillbillies are lol they would rather break it first than give up. Either way it's all for a good time they're having fun so who cares it's their vehicles
@@TheOliveBranch7 if everybody was as thick as shit they wouldn't have trucks to drive, or steel to make stuff with, or houses to live in. We'd still be fuckin animals
Still I make $100 an hour but doesn't mean I want to break an engine through a mud pit that I know I couldn't make it through.
awesomeguynamedjon trust me, none of these bumpkins make over $12 an hour
Engines & Transmissions: 😩
Human's: 😲
Mud : 🤣🤣🤣🤣🤣
SMH😐
To tell you the truth, the guy who made this mud pit knew what he was doing(carnaval con).
Mark Stevens but is he making money?
Money will do it
That's why the backhoe is there. He already KNOWS no one is making it across...not through the mud, anyway. lol Plus, I would think you would need to line the hole with something to keep the water from just soaking into the ground. A simple, thin sheet of stainless, stamped out to line the holes perfectly. It would be like driving on ice under all that mud. Good scam..funny to watch so many retards tear their shit up to attempt the impossible. It was so funny to watch those big monster trucks get stuck, and then some guy in a little f150 or something with tiny tires by comparison, think they have a chance at all. If they see trucks built specially for shit like this fail, why do they think their daily driver, built for comfort and highways, with off-road tires will stand any chance at all? Why even fuck it up by driving it into that shit? I bet all those drivers would fail sobriety checks..lol
This is so obviously rigged. Its like a Vegas casino, its always in the house's favor, or in this case, the "mudsino's" favor. I can't believe that anyone would think any 4x4 could go through that rigged mud hole is a dumass and deserves to get laughed at for thinking " their 4x4 is so bad ass that it cross anything "!. I'm born and raised in one of the swampiest states and I'm very experienced in driving in the woods and swamp, I've crossed many mud holes in my day and something is definitely NOT right about that hole. Its a SCAM! I wonder how much that con-man charges for admission?
Christopher Drake
Agreed
Yep something smells wrong. Bet he charges admission. Plus a charge to run.
People are saying he has a steel plate along the bottom.
Christopher Drake 😂 mudsino!!
I'm willing to bet, at the least it was for shits and giggles for most of the competitors. Now with that being said, they really didn't think very much about this. They've got tires as big as their engines, that probably weigh close to the weight of their engine. They should have dropped it a few feet back towards the ground, flex sealed the dog shit out of everything under the hood, and put smaller mud tires on. I'd throw some chains on as well, no one said anything about using chains. Then again, this looks just for fun.
wow dude that gmc is running way to lean
1:35 did he just put a truck frame on a tractor engine
Can confirm that is a chunk of rig frame rail hahah
I just checked the rules. The open class is the only ones that get a shot at the 5k. No dually unless its a factory dually i assume that means factory sized tires. No top skimmers either aka swamp buggy trucks.
So.. make the rules so it's impossible and have a 'reward'. Cool
There's a steel plate in the pit.
Is there anything about tire mods? Such and paddled or spiked tires or running tracks?
I now know where the saying, "dumber than dirt", comes from
It's older than dirt.
30 seconds with no forward progress and they should yank them back out.
+Chris Call I believe that was the rule, they started dragging that one chevy, after many attempts to get him to stop.
You've obviously never been in the mud before. You can have 30 min of no foward progess then all of a sudden shit can change and you're driving out.
22mrranger ok well u can go sit 30 min at your own hole. Clearly others are in line here so if it isn’t moving they should be dragged out
You could do it if you changed the shape of the treads, and reduce the weight of the vehicle. Would an electric truck be eligible to cross?
Lol
It's like my uncle said. You go as far as you can in two-wheel. When you can't go no more you lock in four-wheel and back the hell out. Not floor it until the engine blows. You gotta drive that truck to work to pay for it.
Ok Boomer
C-mon billy bob let sell the farm that dad left us for $500k and with that money we build our selves a big bad ass lifted truck to go compete for 5k on the BOUNTY HOLE!!🤔🙄😩😩😩
What is at the bottom of this pit? Flat rock?? Its some soupie shit but after a certain point the tires dont sink any further.
There is a very simple and much cheaper solution to this mud hole.
An average sized truck with maybe 2-4 inches of lift.
4 normal sized paddle tires maybe 33s, locked front and rear diffs, and a shit load of hp on a high revving engine.
Get some wheel speed and hydroplane across it
Ok Mr expert bring that setup and let's see you do it
@@brockmaine2743I don't even like trucks, I personally own lowered fast cars. However I do understand the basics, spinning your wheels at 3mph is not going to get across the water. If you watch all these videos, there's a guy that brings a truck just like that and it crushes the mud holes.
I read somewhere in the comments that no top skimmers is a rule for this pit sadly
That is exactly how you do this. Helped a buddy of mine conquer some mud pits. Small tires made all the difference. Wheel speed is the key.
I thought I saw the banjo player from Deliverance.
Matthew M 1
Murica
OVER THE YEARS I HAVE LEARNED ONE THING THAT HOLDS TRUE TO THIS DAY " THE BIGGER THE TRUCK THE LOWER THE IQ"
inpc 3333 what are you finna build a spaceship to go to a different galaxy and find a new planet to live on after you make this planet inhabitable with all your green house gases
But the prius generates 3 times the pollution to build it than any one of my 11 trucks will generate within 20 yrs
One thing we've all learned over the years true to this day anyone who comments in capital letters... Has a deep throat
After watching this video I told my sister we can no longer have shower time.
This is a great video for fans of trucks driving in to a mud pit and immediately getting stuck.
I’d love to see the cyber truck try this
Everyone here bought scratch off lottery tickets and a 12-Pack on the way to the mud hole
😂🤣😂🤣😂
Or a 12 pack eric d
my Honda civic would get through that no problem lol
kuntre boi tbh that’s a huge anchor. Even that might not work. Maybe a bulldozer?
Sure. If you can somehow attach those monster truck tires to you civic, it'll float across that mud hole.
has nobody told them they ain't moving
There’s such a thing as too much water and mud. Takes the fun out of it
I know rite
I bet theres steel plate 3' down. Is he charging admission?
How much you bet
They need locking diffs and portal axles. Jesus man, the differential hub is a mud trap, you're dragging your diff through that swamp. Lifting the cab won't help you if your differential is isn't ported.
If I went threw that mudhole on my snowmobile would that still get me the money?
I like how they spend a minute just spinning their tires with no forward progress
Sure your entitled to try but c'mon if your vehicle isn't fully locked front and rear you have 0 chance ... but their pretty trucks do look good with a coat of mud
1) gave up easy
2) trying to hard
3) fail before enter
4) yeah let me get in flop..
What bugs me is no one has switch the design up at all and brought in something with really tall axles it's the axles in the frame that gets stuck in the mud not the tires or truck get those axles and frame out of the mud and you fly through it
@@JP-xg8cd add a skid plate, like a ski, to the front and rear differentials. They are getting hung up and pushing against themselves.
It's called portal axles and they are out there just very very expensive and not currently strong enough to handle those massive tires however another option is to use the frame and axles from a crop spraying tractor.
Should’ve put those tires on backwards 😂
2:20 Poor chevy didn't even make it into the hole
Must be the most boring thing I’ve ever seen.
that's really ignorant! 5 grand won't pay for a new motor, but what's even more stupid is 99% don't have the locking gear's to get out of something like that it's a combination of power train, and they just creep I'm and don't move six inches but they keep on mashing the pedal ya buddy I'm still moving! 🤣🤣🤣🤣🤣
Hell that one ole boy didn't even make in the hole 🤣😂
This is why Earth hates us
@Never Gonnatell Lol what
Definitely a metal-plate along the bottom .... Along with some type of oil substance.
entirely to much tire flotation. a narrower agri-tractor type tire would have been a WAY better choice paired with locking diffs. notice the narrower tired trucks did a bit better as they were touching the hard bottom. the other truck were floating in the slop
Nothing with straight axles will ever cross that hole.
Yes let's spend three times as much build up a truck and destroy all that money trying to get across the mud to earn income we could have just saved $100,000 DOLLARS....
Best show was the square body throwing flames
Come on now. No bottom, axles are as high as the middle of the rim? No wonder they cant cross.
Welcome back to another episode of “ why was this on my recommended” as today we see people burn out their motors and clearly go nowhere
$500 truck 70 mph endo three times..gimme my money
Part of the reason why they don't get anywhere is that they clime in the pit slowly gun it hit the pit at 70 miles an hour gun it ........
Whooooooooo whoooooooooo let's awww go down to da muuuuuuud pit an drink sum P.B.R. an by da waaaay my sister's pregnant WHOOOOT WHOOOT IMA GUNA BE A DAD... ima b a uncle an a dad at da same time
You impregnated your sister? 🤔
😎 thats some good old global warming machine right there..
7:40 "Ok Buddy...now bury yourself!"
@2:20 Not a good sign that you didn't even make it all the way into the hole.
ok......sooooo BIG tires....i get it......BIG engines...I get it....but NO lockers on the big trucks?..I don't get it.....and they should name this hole the 'sit and spin'.....
+Jack W naw we got em. Idk why theses big trucks seem to never have them though. Maybe it's a compatibly issue?
+rcarlisi63
It's a break stuff and wallet issue.
On top of none of them seem to be geared correctly
Can’t lock them being that big to much tire the engine will bogg down
@@jameshickey3862 it's all about the gearing, em boys need way shorter gearing. (Edit) a buddy of mine actually just picked up a big lifted red square body Chevy with 44s. It tops out at 40 haha but it spins them tires like nothing.
chain drive differantials get rid of the pumpkins
Didn't anybodys crazy uncle teach them about locking differentials and skinny tires
Are you fucking braindead? You need wide tyres for traversing mud.(Do you even know basic physics? Pressure = force/area)
@@kiyoponnn hey my truck with skinny tires goes through a lot more than most with wide tires then again they are rice and cane tires vs floatation tires
InfiniteLoop mud has nothing to do with physics
I bet a Willys wrapped in a tarp could cross it.
Bodies jacked way up, but gets hung up on the axles...
I seen a guy on villano beach Florida with a hummer he was doing good till he decided to go up a bump and bottomed out lol and a Chevy luv drove circles around him in 2wd the hummer was going to slow
OK will someone get something with some paddle tires and show these big wheel trucks up seriously
Paddle tires don't come tall enough. If you sink you're truck is done.
+bryanb1973 There's only two rules at this place it must be a 52" or taller tire and no backing up!
+myyota85 hey I didn't know that about the tire size I just know something with some healthy horsepower and a set of paddles would skip across that with no problem
Exactly what I was thinking paddle tires and correct gear ratio
You know whats crazy? They could've all made it had they driven slower, i mean turtle slow.
Bro just make a tank truck with a high axle, disperse weight better
Lol the moment the chevys enter they get stuck.
Skinny wheels, wheel weights and locked diffs. Done
Wouldn't you want the wheels as wide as possible?
I have feelings for my sister after watching
A different design would guarantee to cross that every time...
That's what I'm thinking as well. A locked triple axle setup with tractor tires and a large diesel engine might work. Of course, all the differentials would need to be locked.
All you need is a subaru
I’ll never understand why everyone wants to use tractor tires instead of Mickey Thompson or super swampers
Yes, light truck, good mud tires and portal axles w diff locks.
FAKE FAKE!!!! RIGGED!!!! There is obviously a slick metal plate at the bottom of that mud pit; you can tell because the tires never sink..just spin.
7:34. Lol why bother.
Doesn’t anybody have a set of tracks for their truck?
Hit it fast get through thr ruts Kinda like they r scared
Sean Obrien that’s what I was thinking. They’re going way to slow.
Yet none of these guys thinks that weight is the issue. More weight is needed for the tires to catch more grip....
My Subaru gots this!
Low lock and easy on the throttle would go right through !
yeah bud keep telling yourself that and go try it out😂
That Chevy with the marine sign on front was a bad ass look and sound 👍 to that guy
life with Rudy Chevy is the heartbeat of america
@@theangryitalian7922 no. There commercials are comical tho .
Does it have to be a truck.....'cause if not I can stone skip a Ford Pinto that far.
Man that looks fun
Don't think i've watched anything more tedious in my life.
Make it 15G and ill bring my SHERP.
Heavier trucks sink in deeper, a light truck with big wheels would cross this no problem.
The Marines truck was locked n loaded...good shit!
ejeudgtejgh
But didnt make it 😜
@@leogetz31ify nope...rigged pit
Half the people in the comments don’t own trucks
Everybody is saying steel on the bottom, maybe so but if so get some strong magnets on the tires n crawl across slowly
Paddle wheels
Yeah, I’ll just walk across, easy 5k dawg
who else had their throttle leg going trying to help the last truck across... Gotta Love Chevy and GMC
HistoryHunter ...
@Kevin Olschesky only reason the sound of the Ford's rusting isn't louder is because they all been crushed and melted down already.
Lol the only thing still gmc about that truck is the badge on the front. Probably a couple parts of the motor. The cab.
Though I am a Chevy guy, acting like that won because it's a Chevy is silly.
Fuckin chevy engine's best out there cant blow them up
You need one of those nitro burning 4wd things, that when they punch it, it just scimms across the top, it dont have a chance to get stuck!
the sherp can do this
dont understand why they dont just deflate their tires to like 8-10 psi
it's because there all show and no go!
Literally, wanna get through that get a lift kit. Skinnier tires (so each tire has more weight on it) don't fucking floor it going in. Take it nice and steady. Bigger tires would work but they need bigger traction groves for the mud.
shoulda flipped the tires to get an advantage.
The tires used give the trucks a hydroplaning effect. In essence, lifting the truck the more gas you give it. A simple redesign and locked diffs and this challenge is solved,
fr1ed ric3 thank you.