BTW.. if you're saying that that's a Forged piston.. someone has lied to you.. you can tell that the piston is cast because of the dimples in the valve relief valleys.. A FORGED piston is made out of billet material and CNC cut there's no dimples on a forged piston..
Hi Mike..How long do you allow the permatex cooper spray on the gasket before you install it..Nice Bang Jin bell and NYC drive face..What roller weight are you usung for this set up?Thanks in advance
Sorry late response I believe we switched it to 11 or 12 gram roller weights you can don't have to wait that long maybe a few minutes after applying copper spray only on the transmission cover I wouldn't do it on the CVT gasket that should be kept dry
I’m a car and bike show guy. Your detailing is waaaay to obsessive. Lol I would hate to be the person to make the Closed Caption for this video. Hahahaha
Worried about looks but your just going to leave that mismatched washer stackup. An nobody uses a brass wheel on there cylinder wall. That is what you were "loosing " your breath on. If you don't really understand what it is your doing, you should of not make a how to video.
So I bought a ncy complete cvt performance kit and put 12g sliders in and came with 1500 "yellow" contra and three 2000 "red" clutch springs.. The motor is pushing right at 180cc and when I give gas it takes forever to actually move... I. E. High rpm What am I doing wrong?
What's it in a bike or buggy? What were stock roller weights? Did you use sliders or rollers? Sliders should be 1- 2 grams heavier than rollers. Did you lose top end or only low end?
Wow this is awesome! So my scooter 125cc is slightly moving me to the left without my control? Not sure what is the problem here. But it happened after my accident when I fell off the scooter. However, I was able to replace my CVT, drive belt, and also the Clutch. 1min - What I noticed inside the variator which is the shaft with the star shape and the spacer between, mine has been wrecked from the accident and I left as it is? Now the scooter is always drifting to the left.
Hi i just want to ask a question i bought a jiso variator and the guy told me it requires a g ring. I assumed that its a variator shims. Is that correct?
A lil peace of Advice. Don’t video tape ur self looking for washers what ppl want is skip and go. If you don’t no what I mean is if ur missing somthing stop the video look for it and start the video once you find it. Go straight to the point u wasted so much time man. I wish you luck. Bless
A nub but sounded like pro What a joke..... Using a razor to clean a port Really??? Why dont use carb cleaner?? And also, you used too many washer, no need to use that many washer, that kind of nut already more than enough Bwahahahhahaha
You should make a video upgrading a 139qmb 50cc Chinese scooter with a ncy
BTW.. if you're saying that that's a Forged piston.. someone has lied to you.. you can tell that the piston is cast because of the dimples in the valve relief valleys.. A FORGED piston is made out of billet material and CNC cut there's no dimples on a forged piston..
Hi Mike..How long do you allow the permatex cooper spray on the gasket before you install it..Nice Bang Jin bell and NYC drive face..What roller weight are you usung for this set up?Thanks in advance
Sorry late response I believe we switched it to 11 or 12 gram roller weights you can don't have to wait that long maybe a few minutes after applying copper spray only on the transmission cover I wouldn't do it on the CVT gasket that should be kept dry
Very Well Explained
🎉 top man. 👍
I'm thinking your never going to run the variator without a nut. So, why would it matter if there is a mark behind the nut?
What happened to the variator fan?
you cant see it when the covers on
My 115 variator do not fit on my gy6 150cc the screw comes off when I screw it
I’m a car and bike show guy. Your detailing is waaaay to obsessive. Lol I would hate to be the person to make the Closed Caption for this video. Hahahaha
Have a 279cc scooter with a CVT and would like to know (because all I ever see is 49cc examples) if this would apply to someone with my size engine?
I took have the same problem yes would someone please explain the bigger cc engine
Do you have any videos for a kymco people 250?
You can also use a black sharpie for those bolts! Lol
What you think my 115 varietor doesn't not fit on my 150cc gy6
Worried about looks but your just going to leave that mismatched washer stackup. An nobody uses a brass wheel on there cylinder wall. That is what you were "loosing " your breath on. If you don't really understand what it is your doing, you should of not make a how to video.
i don’t know why i’m wasting my time watching this
Cuz you like me :)
So I bought a ncy complete cvt performance kit and put 12g sliders in and came with 1500 "yellow" contra and three 2000 "red" clutch springs..
The motor is pushing right at 180cc and when I give gas it takes forever to actually move... I. E. High rpm
What am I doing wrong?
What's it in a bike or buggy? What were stock roller weights?
Did you use sliders or rollers? Sliders should be 1- 2 grams heavier than rollers.
Did you lose top end or only low end?
Quick question uhm does those clutch bell and TD set for gy6 can be suitable for sym jet100 ??
Wow this is awesome! So my scooter 125cc is slightly moving me to the left without my control? Not sure what is the problem here. But it happened after my accident when I fell off the scooter. However, I was able to replace my CVT, drive belt, and also the Clutch.
1min - What I noticed inside the variator which is the shaft with the star shape and the spacer between, mine has been wrecked from the accident and I left as it is? Now the scooter is always drifting to the left.
You bent your forks a the frame.
Hi, i want to buy this kit but i live in Turkey. Do you send stuff to ;Turkey if ai buy this kit?
im getting a 80cc kit for my 50. should i get a new variator clutch?
If you want to be able to pick up accelerate better yes
Just change out the rollers, you should be fine.
Man this guy is like "the scooter whisperer" lol. I'd want this guy working on my scooter, every DAY!!
Hi i just want to ask a question i bought a jiso variator and the guy told me it requires a g ring. I assumed that its a variator shims. Is that correct?
if you want clean porte use diesel
You talk to much through your video you need to get to the point without all the extra ish
Apparently you don't know how a clutch works.if they stayed together you would always be moving with no idle lol.
Hmmm can not understand a word to our say
Is that ENGLISH??
A lil peace of Advice. Don’t video tape ur self looking for washers what ppl want is skip and go. If you don’t no what I mean is if ur missing somthing stop the video look for it and start the video once you find it. Go straight to the point u wasted so much time man. I wish you luck. Bless
A nub but sounded like pro
What a joke.....
Using a razor to clean a port
Really???
Why dont use carb cleaner??
And also, you used too many washer, no need to use that many washer, that kind of nut already more than enough
Bwahahahhahaha
You talk too much but otherwise you're doing a good job
🤣🤣