Transforming Ford Roadster Trunk Lid: MAJOR Rust Repair & Rumble Seat Conversion!
Вставка
- Опубліковано 15 вер 2024
- On this episode we take our stock trunk lid for the ‘29 Roadster body and start the rumble seat conversion. This conversion usually happens in the opposite way, but with a growing family and seats in dire straits, it’s time to make the rumble seat. The panels are separated and major rust repair is done. Stay tuned for part Two
MERCHANDISE STORE
bennettscustom...
FOLLOW ON INSTAGRAM
@bennettscustomsco
www.instagram....
Really enjoyed the "in the mind" with the Scotsman. Keep them coming
More to come!
Your attention to detail is admirable. Very appealing to watch. Thank for sharing
Thank you William!
Louvers on the trunk is a style thing. I pinstripe the door jambs so.....do what you think is cool. Fantastic model for the t-shirts! Just bought two.
Thanks for the support Justin!
I needed this and am looking forward to the next part. My 28-29 lid is in similar condition so thx for the lesson.
Next week Bob! Hang tight!
I tend to rush the work on my rods, but this just shows it’s better to be thorough it get it right first time. Nice work, great vids. Hi from the UK 😁👍🏼
Most definitely. Do it once and once only
I love your work. Great attention to detail. Thank you for sharing.
Thanks Rob!
G'day from NSW. Very envious of your skills and the time you have available to get this stuff done. Hopefully next week will be cooler. Have a good one.
Thanks for joining in Allan!
Great video Jordan. I do agree with your thought on the water letter outer holes. Looking forward to more on the rumble seat.
Just makes sense to me!
Just one more thing at about 1600 my eye was drawn to the interesting wall art in the background of the radiator cowl. That looks like a interesting project.
Great detail video ❤
Louvers in body panels go back to early hot rods in US & salt flats. Way before PETA was a twinkling of your grand parents eyes
Excellent work! Drain holes not a cop out. Henry should have put them in to begin with! Go Bennetts Customs, keep moving forward!
Worked in bus body building industries for years - 'if you can't guarantee that water won't get in, make sure it can get out'
Very nice work Jordan Coming along nicely
Thanks mate, love your work
Much appreciated
Awesome. Love watching your process and skills. Great content appreciation for your efforts in sharing on the TUbE
Beautiful job on the decklid! I agree lots of louvers! Take care.
Me too!
I'd call that an improvement over the original factory pressing. Good work.
re: that "flat chisel thing". Looks like a putty knife from here. 😆
Good job on cleaning that up mate! 💯👍
Trashcan 🗑 Approved
😂
Another great video Jordan enjoy your beers 🍻
Nice job nice work. When I use nutzerts I file a small notch in the hole so the zert doesn’t spin
Great work once again , that's one panel I'm missing for my 5 window coupe , great to see how you went around the repairs , what's the rust treatment your using ? 👍
Called ‘Rust bust’ or another is ‘Galmet’
Love louvers. They give the car that race car look that maybe it’s been on the salt or the lake bed. Plus they will give you 10 mph just standing still. Great repairs as usual. What’s your beer of choice castle main, fosters the amber nectar. Or a nice cold Guineas. Dam I’ve got to go work in three hours. Tim.
Easy drinking beer for me, no fancy shit haha
I’m a Guineas person but it’s getting to around £40 a gallon! About 80 Aussie dollars. Petroleum is around£8 a gallon about 16 Aussie dollars. So don’t drink and drive. It’s to bloody expensive.
Nice work, but your merch is going to make a lot of grade 8s very happy.
Good on them. Need to get them young and into hotrods
Right nice mate!
Thanks!
Looking for episode 2 on this subject mounting the rumble seat
Hello dear guy , i'm french guy , my job is coach builder former and painter , you make véry good job ,
I have not enough money , to make the same hot rod and in France, the Ford 32 or 34 are véry rare
Long life to you ❤
Thank you! Yes 34s forsure
Enjoy watching your projects and seeing other car builders. You should have a look at this guys car in Switzerland. Just your sort of thing.
Delahaye 107 19Bozzy 92 Let me know if you like it.
love the hoodies. Though I have ginger hair so Ill look like a traffic cone..
Carrot 🥕
I would Like to see some sort of center body line on the trunk lid then louvers.
Especially when we’re talking about rust and debris getting into the trunk lid. I would think that louvers would make it weak?
Louvres definitely would t make it weak adding impression’s into the steel adds a rigidity
シュンヤのガレージライフみたいで好き❤
Hi, great video…a question, you are moving around a round pad or cushion when you are working, what is that and why do you have it on the material you are working on?
Thanks again for the videos and your creations
Possibly talking about the sand bag? It’s used to shape steel, but also has a good amount of weight to rest of panels or steel sheets to help keep them in place!
Great video as always I'd be really tempted to put a tack on the back of those rivnuts
You’re right!
louvers on the trunk lid is silly. What ya trying to vent junior? Seeing louvers on a trunk lid makes me think you got some animal in the trunk that needs to breath!
Agree!
Hudson tends to make a lot of animal noises!
This comment makes me want to put louvers on my 32 trunk lid
Spoiler. There’s louvers 😂
. * * * * What shielding gas do you use ? Why don't more fabricators use silicone bronze ? it requires much less heat , and cause less warping /. Nice work !
Great episode as usual. I see that you have the same problem as myself on your left door lower end sticking out. How to fix that take the door apart or shim the body? best regards from Holland!
Do you think you could convert a 48 ford coupe to a rumble?
What is the name of the tool you use at 10:55 of the video?
No louvers
The wording on the back of your Tee shirts is not appropriate for younger audience.
And?
Neither is many parts of the Bible...What's your point?
The kids will love it .
And we Australians are thicker skinned than that and basically don’t give a fig.
The wording and gesture lacks class period!!
What year is that buick
50
Im Sorry but I Don't And didn't appreciate the language on your merch, nor the gesture by the young lady. Really? Was it necessary.?
I guess I'll be unsubbing you from my list. 🥴
Bon voyage!
@@bennettscustomsco Loved your builds. Have a great life.
I love your work very much, but I am not a fan of chatter. Viewers want to see the work and not the talk, and I apologize for this interference.