This brings back memories of when I was a teenager. I worked for a state park in Northern Maine our crew was in charge of clearing the trails and making new ones. I was in charge of operating the clearing saw and boy did I have fun (minus the mosquitos).
These saws work great especially with the newer carbide tipped blades. I would be sure to treat those stumps almost immediately after cutting though. As someone else said, put a dye in it to know which stumps have been treated. If you don't you'll be back out there fairly soon afterwards, cutting them again as bushes.
Thanks, I wasn't aware of that. I often switch between the saw blade and the grass trimmer head, so I don't think I will take the time to change the handlebar as well.
Therefore is more convenient use only the grass handlebar. I thought you used it only with the saw blade. It's a beast of brushcutter, and you can do a lot of different works with that :)
And then there is professional People who learns to prefer The right Side. The reason for this is the rotation. You gonna get the brushes away from you and your blade and not into you and bog the saw down. Using this style gonna need some practise and some experience but is the most efficient
Bruker du standard lengde versjonen av sagen eller k som er den korte? Fs 460 kommer nå i 2 versjoner fs 460 c-em og fs 460 c-em k. Førstnevnte kommer med trådhode og girhus tilpasset gressrydding mens k versjonen kommer med sagblad og annen vinkel på girhuset igjen. Og jeg greier ikke å bestemme meg hvilken lengde jeg skal gå for når jeg skal bruke den til begge deler.
Jeg bruker standardlengden. Den passer perfekt til meg som er 187 høy. Da står det igjen en stubbe på ca 5cm uten at jeg trenger å bøye i knea for hver buske. Den er også så lang at du kan la trådhodet eller ninjakniven subbe bakken for et pent resultat når du klipper gress.
+jonasne Takk for svar :) Bytter du hele girhuset når du bytter mellom gress/sagblad for å få annen vinkel eller kun beskyttelsesdekselet og skjæreutstyret? Fikk nettop maskinen i hus nå. Den "vanlige" lange utgaven.
Grattis med ny maskin :) Bytter ikke girhuset, kun beskyttelsesdekselet. Det er en tynn metallkopp som sitter nærmest girhuset som må byttes når man bytter mellom gressutstyr og sagblad.
This brings back memories of when I was a teenager. I worked for a state park in Northern Maine our crew was in charge of clearing the trails and making new ones. I was in charge of operating the clearing saw and boy did I have fun (minus the mosquitos).
Best example video I have found to explain these things cheers
These saws work great especially with the newer carbide tipped blades. I would be sure to treat those stumps almost immediately after cutting though. As someone else said, put a dye in it to know which stumps have been treated. If you don't you'll be back out there fairly soon afterwards, cutting them again as bushes.
super merci pour la démonstration
A man needs one of these to film copperhead and timber rattler snuff films.
Nice, good work pal
If you use the circular saw blade, you should use the saw handlebar, because you have more control of the saw blade and you can move it better ;)
Thanks, I wasn't aware of that. I often switch between the saw blade and the grass trimmer head, so I don't think I will take the time to change the handlebar as well.
Therefore is more convenient use only the grass handlebar. I thought you used it only with the saw blade. It's a beast of brushcutter, and you can do a lot of different works with that :)
NEVER CUT LEFT TO RIGHT!!
ALWAYS CUT RIGHT TO LEFT!!
NOTICE THE KICKBACK??
And then there is professional People who learns to prefer The right Side.
The reason for this is the rotation. You gonna get the brushes away from you and your blade and not into you and bog the saw down.
Using this style gonna need some practise and some experience but is the most efficient
Pourquoi se prendre la tête à se baisser avec une tronçonneuse. Ça peut couper des tiges jusqu’à combien de cm ?
What’s it mean when you have that blade on but the head of the weed eater leaks oil by the blade?
Probably bad seals. Replaces seals and add grease, as the bevel gears are lubed with grease.
where can i purchase one of these
Go to Stihl.com and find your nearest local dealer
was hast du für ein drauf
Bruker du standard lengde versjonen av sagen eller k som er den korte? Fs 460 kommer nå i 2 versjoner fs 460 c-em og fs 460 c-em k. Førstnevnte kommer med trådhode og girhus tilpasset gressrydding mens k versjonen kommer med sagblad og annen vinkel på girhuset igjen. Og jeg greier ikke å bestemme meg hvilken lengde jeg skal gå for når jeg skal bruke den til begge deler.
Jeg bruker standardlengden. Den passer perfekt til meg som er 187 høy. Da står det igjen en stubbe på ca 5cm uten at jeg trenger å bøye i knea for hver buske. Den er også så lang at du kan la trådhodet eller ninjakniven subbe bakken for et pent resultat når du klipper gress.
+jonasne
Takk for svar :) Bytter du hele girhuset når du bytter mellom gress/sagblad for å få annen vinkel eller kun beskyttelsesdekselet og skjæreutstyret? Fikk nettop maskinen i hus nå. Den "vanlige" lange utgaven.
Grattis med ny maskin :) Bytter ikke girhuset, kun beskyttelsesdekselet. Det er en tynn metallkopp som sitter nærmest girhuset som må byttes når man bytter mellom gressutstyr og sagblad.
jonasne
Our 460 work much beter than ur 490 :D