Sharpening the bandsaw teeth on the Woodmizer was an added chore, which this saw eliminates. Looks like a slick outfit, but sawdust buildup right where the sawyer has to walk will be a problem.
Looks like a similar design to the old Mobile Dimension sawmills. Those had a Volkswagen engine, cut vertically and horizontally at the same time, and the mill propelled itself.
This one can cut quicker due to more hp to one blade, cut larger dimensions, and saws the next board while you stack the previous. Our automated version also pulls the previous board back while sawing the next... great, one man option. But ultimately, the key to success on this one is it can section saw. You don't need to attempt to take it in one bite fighting tension and hard timbers.
This is the 8inch model. Good for 16" x 8" boards, one unlimited slab per log, weatherboards right off the log. Timber right off the log without rehandling. It's good for the pocket, too, as the blade lasts for years. Good Sawdust shavings, too. They are peelings not dust.
Not as simple as that, you need to swing the blade at the other end and also perform sizing. Also need 100 variable speed from very slow to a quick run. Luckily we've figured this out and have automated mills available on our website. www.turbosawmill.com
This is a different way of cutting, instead of loosing 4+ boards around the bark region on a band you loose a little through kerf. So in my opinion with a swingblade your up a few boards rather then down.
@@TURBOSAWMILL I have a Norwood band mill that is set up for large logs and 24' length,timbers and beams are our main concern but we take all the side lumber down to 3/4 in. and nothing goes to waste, we will be getting a two blade edger next spring because cutting boards in the band mill is slow but it works but the edger as way faster and we can concentrate more on the heartwood. Our 1" x 8" x 8' is really popular and sells like hotcakes. Thanks for making the video!!
Swing blades cut better and bigger wood. The blades are faster and eiser to sharpen. They are less bulky. The kerf is more like 1/8 so also half what you said.
Exciting glimpse into the future of sawmilling technology!
Thank you from the opening cut to the last cut very good showing.
Does the Blade spins by a worm gear?
how much does it cost?
Nice work ,haw much for the blade?
Very good machine, may i know where i can get n it's price too
www.turbosawmill.com
Onde consigo compra uma dessa?
Can you easily quarter saw with this mill?
Yes you can, the easiest way possible.
I need this machine
Keren mantam mesin pembelah kayunya
Very interesting design. Cool video!
Sharpening the bandsaw teeth on the Woodmizer was an added chore, which this saw eliminates. Looks like a slick outfit, but sawdust buildup right where the sawyer has to walk will be a problem.
Not really, always consider the automated version...
leaf blower
Just as long as the sawdust is dry. Wet, you'll need a scoop shovel. @@atomicwedgie8176
Como faço pra encontrar para comprar uma dessa
Boa tarde.
Você é o fabricante da serraria?
How much do these run as far as cost?
They start at 14k and go up to 35k www.turbosawmill.com
Very cool.
Can you cut wide slabs with it?
Yes you can
Scaled down version of the Mighty Mite and Mobile Dimension sawmills.
Impressive!
keren bosss mesinya sukses sllu boss
Looks like a similar design to the old Mobile Dimension sawmills. Those had a Volkswagen engine, cut vertically and horizontally at the same time, and the mill propelled itself.
This one can cut quicker due to more hp to one blade, cut larger dimensions, and saws the next board while you stack the previous. Our automated version also pulls the previous board back while sawing the next... great, one man option. But ultimately, the key to success on this one is it can section saw. You don't need to attempt to take it in one bite fighting tension and hard timbers.
@@TURBOSAWMILL I was not criticizing your saw. Just noting the similarities and differences. My brother used to have a Mobile Dimension mill.
@justjames9775 I was just pointing out the advantages in having one blade is all. Thanks.
Super bon boulot. Pourrait-on en commander ?
What length does it cut? They appear to be fairly long logs.
Standard is 4.5m but you can add 2m extension to that for 6.5m logs
Sangat bagus sekali
Pra mim é sempre uma honra ter está aqui te prestigiando, vamos sempre juntos somar e fortalecer nossos trabalhos, Muito obrigado,,,, Bom Dia
Qual o valor
QUAL O PRECO
good for 2x4's
This is the 8inch model. Good for 16" x 8" boards, one unlimited slab per log, weatherboards right off the log. Timber right off the log without rehandling. It's good for the pocket, too, as the blade lasts for years. Good Sawdust shavings, too. They are peelings not dust.
Diameter of blade?
How do you hold small logs from moving?
We have cool alloy logdogs for very small logs.
Qual é o valor dessa máquina manda no meu Zap
Buenas tardes si fuera tan amable de enviarme un número o algo para podernos comunicar Estoy interesado en su máquina
Quanto custa uma cerraria portatil dessa
Mantap dan semangat 🙏👍👍❤❤❤
Gostei preciso telefone de contato
Como faço para comprar
Why not stick a motor on the feeder so these fellers aren’t having to push? U could throw a decent motor on for an extra fifty quid no?
Not as simple as that, you need to swing the blade at the other end and also perform sizing. Also need 100 variable speed from very slow to a quick run. Luckily we've figured this out and have automated mills available on our website. www.turbosawmill.com
Me interesa comprar
Would obviously been nice if ya learned to talk and told us some things about the saw like features, the pro's and con's, etc
We've got another 200 videos for that check out our channel...
This is an exercise machine and the lumber is just a byproduct of weight loss and sweat.
You can automate it, then add the board return and finally invest in a forklift.
Our Friend Amadou gave me this contact.
Hello,
Notre Ami Amadou m'a donné cette contact.
You are losing quarter inch of wood with every cut and there were a lot of cuts. I like the engineering and quality of build though.
This is a different way of cutting, instead of loosing 4+ boards around the bark region on a band you loose a little through kerf. So in my opinion with a swingblade your up a few boards rather then down.
And in my opinion some of the best wood is around the outside region.
@@TURBOSAWMILL I have a Norwood band mill that is set up for large logs and 24' length,timbers and beams are our main concern but we take all the side lumber down to 3/4 in. and nothing goes to waste, we will be getting a two blade edger next spring because cutting boards in the band mill is slow but it works but the edger as way faster and we can concentrate more on the heartwood. Our 1" x 8" x 8' is really popular and sells like hotcakes. Thanks for making the video!!
Swing blades cut better and bigger wood. The blades are faster and eiser to sharpen. They are less bulky. The kerf is more like 1/8 so also half what you said.
You got to break an egg to make an omlette
Compra urgente
Please email jake@turbosawmill.co.nz